try:
content = my_function()
except:
exit('Could not complete request.')
I want to modify the above code to check the value of content to see if it contains string. I thought of using if 'stuff' in content: or regular expressions, but I don't know how to fit it into the try; so that if the match is False, it raises the exception. Of course, I could always just add an if after that code, but is there a way to squeeze it in there?
Pseudocode:
try:
content = my_function()
if 'stuff' in content == False:
# cause the exception to be raised
except:
exit('Could not complete request.')
To raise an exception, you need to use the raise keyword. I suggest you read some more about exceptions in the manual. Assuming my_function() sometimes throws IndexError, use:
try:
content = my_function()
if 'stuff' not in content:
raise ValueError('stuff is not in content')
except (ValueError, IndexError):
exit('Could not complete request.')
Also, you should never use just except as it will catch more than you intend. It will, for example, catch MemoryError, KeyboardInterrupt and SystemExit. It will make your program harder to kill (Ctrl+C won't do what it's supposed to), error prone on low-memory conditions, and sys.exit() won't work as intended.
UPDATE: You should also not catch just Exception but a more specific type of exception. SyntaxError also inherits from Exception. That means that any syntax errors you have in your files will be caught and not reported properly.
try:
content = my_function()
if 'stuff' not in content:
raise ValueError('stuff not in content')
content2 = my_function2()
if 'stuff2' not in content2:
raise ValueError('stuff2 not in content2')
except ValueError, e:
exit(str(e))
If your code can have several possible exceptions, you can define each with a specific value. Catching it and exiting will then use this error value.
A nicer way to do this would be just to assert that the key is there:
assert 'stuff' in content, 'Stuff not in content'
If the assertion is not true, an AssertionError will be raised with the given message.
You can raise an exception with raise if that's what you're asking:
if 'stuff' not in content:
raise ValueError("stuff isn't there")
Note that you need to decide what kind of exception to raise. Here I raised ValueError. Likewise, you shouldn't use a bare except, but should use except ValueError or the like, to catch only the type of error you want to handle. In fact, in this case that's especially important. You presumably want to distinguish between a real error raised by my_function and the "stuff not in content" condition that you're testing.
Related
Is it possible to tell if there was an exception once you're in the finally clause? Something like:
try:
funky code
finally:
if ???:
print('the funky code raised')
I'm looking to make something like this more DRY:
try:
funky code
except HandleThis:
# handle it
raised = True
except DontHandleThis:
raised = True
raise
else:
raised = False
finally:
logger.info('funky code raised %s', raised)
I don't like that it requires to catch an exception, which you don't intend to handle, just to set a flag.
Since some comments are asking for less "M" in the MCVE, here is some more background on the use-case. The actual problem is about escalation of logging levels.
The funky code is third party and can't be changed.
The failure exception and stack trace does not contain any useful diagnostic information, so using logger.exception in an except block is not helpful here.
If the funky code raised then some information which I need to see has already been logged, at level DEBUG. We do not and can not handle the error, but want to escalate the DEBUG logging because the information needed is in there.
The funky code does not raise, most of the time. I don't want to escalate logging levels for the general case, because it is too verbose.
Hence, the code runs under a log capture context (which sets up custom handlers to intercept log records) and some debug info gets re-logged retrospectively:
try:
with LogCapture() as log:
funky_code() # <-- third party badness
finally:
# log events are buffered in memory. if there was an exception,
# emit everything that was captured at a WARNING level
for record in log.captured:
if <there was an exception>:
log_fn = mylogger.warning
else:
log_fn = getattr(mylogger, record.levelname.lower())
log_fn(record.msg, record.args)
Using a contextmanager
You could use a custom contextmanager, for example:
class DidWeRaise:
__slots__ = ('exception_happened', ) # instances will take less memory
def __enter__(self):
return self
def __exit__(self, exc_type, exc_val, exc_tb):
# If no exception happened the `exc_type` is None
self.exception_happened = exc_type is not None
And then use that inside the try:
try:
with DidWeRaise() as error_state:
# funky code
finally:
if error_state.exception_happened:
print('the funky code raised')
It's still an additional variable but it's probably a lot easier to reuse if you want to use it in multiple places. And you don't need to toggle it yourself.
Using a variable
In case you don't want the contextmanager I would reverse the logic of the trigger and toggle it only in case no exception has happened. That way you don't need an except case for exceptions that you don't want to handle. The most appropriate place would be the else clause that is entered in case the try didn't threw an exception:
exception_happened = True
try:
# funky code
except HandleThis:
# handle this kind of exception
else:
exception_happened = False
finally:
if exception_happened:
print('the funky code raised')
And as already pointed out instead of having a "toggle" variable you could replace it (in this case) with the desired logging function:
mylog = mylogger.WARNING
try:
with LogCapture() as log:
funky_code()
except HandleThis:
# handle this kind of exception
else:
# In case absolutely no exception was thrown in the try we can log on debug level
mylog = mylogger.DEBUG
finally:
for record in log.captured:
mylog(record.msg, record.args)
Of course it would also work if you put it at the end of your try (as other answers here suggested) but I prefer the else clause because it has more meaning ("that code is meant to be executed only if there was no exception in the try block") and may be easier to maintain in the long run. Although it's still more to maintain than the context manager because the variable is set and toggled in different places.
Using sys.exc_info (works only for unhandled exceptions)
The last approach I want to mention is probably not useful for you but maybe useful for future readers who only want to know if there's an unhandled exception (an exception that was not caught in any except block or has been raised inside an except block). In that case you can use sys.exc_info:
import sys
try:
# funky code
except HandleThis:
pass
finally:
if sys.exc_info()[0] is not None:
# only entered if there's an *unhandled* exception, e.g. NOT a HandleThis exception
print('funky code raised')
raised = True
try:
funky code
raised = False
except HandleThis:
# handle it
finally:
logger.info('funky code raised %s', raised)
Given the additional background information added to the question about selecting a log level, this seems very easily adapted to the intended use-case:
mylog = WARNING
try:
funky code
mylog = DEBUG
except HandleThis:
# handle it
finally:
mylog(...)
You can easily assign your caught exception to a variable and use it in the finally block, eg:
>>> x = 1
>>> error = None
>>> try:
... x.foo()
... except Exception as e:
... error = e
... finally:
... if error is not None:
... print(error)
...
'int' object has no attribute 'foo'
Okay, so what it sounds like you actually just want to either modify your existing context manager, or use a similar approach: logbook actually has something called a FingersCrossedHandler that would do exactly what you want. But you could do it yourself, like:
#contextmanager
def LogCapture():
# your existing buffer code here
level = logging.WARN
try:
yield
except UselessException:
level = logging.DEBUG
raise # Or don't, if you just want it to go away
finally:
# emit logs here
Original Response
You're thinking about this a bit sideways.
You do intend to handle the exception - you're handling it by setting a flag. Maybe you don't care about anything else (which seems like a bad idea), but if you care about doing something when an exception is raised, then you want to be explicit about it.
The fact that you're setting a variable, but you want the exception to continue on means that what you really want is to raise your own specific exception, from the exception that was raised:
class MyPkgException(Exception): pass
class MyError(PyPkgException): pass # If there's another exception type, you can also inherit from that
def do_the_badness():
try:
raise FileNotFoundError('Or some other code that raises an error')
except FileNotFoundError as e:
raise MyError('File was not found, doh!') from e
finally:
do_some_cleanup()
try:
do_the_badness()
except MyError as e:
print('The error? Yeah, it happened')
This solves:
Explicitly handling the exception(s) that you're looking to handle
Making the stack traces and original exceptions available
Allowing your code that's going to handle the original exception somewhere else to handle your exception that's thrown
Allowing some top-level exception handling code to just catch MyPkgException to catch all of your exceptions so it can log something and exit with a nice status instead of an ugly stack trace
If it was me, I'd do a little re-ordering of your code.
raised = False
try:
# funky code
except HandleThis:
# handle it
raised = True
except Exception as ex:
# Don't Handle This
raise ex
finally:
if raised:
logger.info('funky code was raised')
I've placed the raised boolean assignment outside of the try statement to ensure scope and made the final except statement a general exception handler for exceptions that you don't want to handle.
This style determines if your code failed. Another approach might me to determine when your code succeeds.
success = False
try:
# funky code
success = True
except HandleThis:
# handle it
pass
except Exception as ex:
# Don't Handle This
raise ex
finally:
if success:
logger.info('funky code was successful')
else:
logger.info('funky code was raised')
If exception happened --> Put this logic in the exception block(s).
If exception did not happen --> Put this logic in the try block after the point in code where the exception can occur.
Finally blocks should be reserved for "cleanup actions," according to the Python language reference. When finally is specified the interpreter proceeds in the except case as follows: Exception is saved, then the finally block is executed first, then lastly the Exception is raised.
I have a try/except where I repeat the except portion frequently in my code. This led me to believe that it would be better to separate the except portion into a function.
Below is my use case:
try:
...
except api.error.ReadError as e:
...
except api.error.APIConnectionError as e:
...
except Exception as e:
...
How would I go about separating this logic into a function so I can do something as simple as:
try:
...
except:
my_error_handling_function(e)
Just define the function:
def my_error_handling(e):
#Do stuff
...and pass in the exception object as the parameter:
try:
#some code
except Exception as e:
my_error_handling(e)
Using just a generic Exception type will allow you to have a single except clause and handle and test for different error types within your handling function.
In order to check for the name of the caught exception, you can get it by doing:
type(e).__name__
Which will print the name, such as ValueError, IOError, etc.
I would suggest refactoring your code so the try/except block is only present in a single location.
For instance, an API class with a send() method, seems like a reasonable candidate for containing the error handling logic you have described in your question.
Define your function:
def my_error_handling(e):
#Handle exception
And do what you're proposing:
try:
...
except Exception as e:
my_error_handling_function(e)
You can handle logic by getting the type of the exception 'e' within your function. See: python: How do I know what type of exception occurred?
If you don't like try-catch statement, you can use exception-decouple package and decorator.
from exception_decouple import redirect_exceptions
def my_error_handling(arg, e):
#Do stuff
#redirect_exceptions(my_error_handling, api.error.ReadError, api.error.APIConnectionError)
def foo(arg):
...
I have:
MY_PATH_DIR = 'path/to/my/json/file.json'
try:
with open(MY_PATH_DIR, 'r') as f:
MY_PATH_DIR = json.load(f)
except IOError, RuntimeError, ValueError:
pass
except PermissionDenied:
pass
And I want to catch all possible errors. With
IOError - I am catching errors when the file doesn't exist or has a
syntax error (non valid JSON).
RuntimeError - couldn't test it but I think that makes sense from the
documentation in case of an unexpected error
ValueError - I got from here in case nothing got returned
PermissionDenied - is a specific Django error
Are there any other Exceptions that would make sense? I'm not sure if OSError makes sense here. I think that would be raised earlier, right?
The purpose of capturing exceptions is to control the program's behavior when something bad happened, but in an expected way. If you are not even sure what would cause that exception happen, capturing it would only swallow the underlying programming errors you might have.
I wouldn't add as many kinds of exception as possible to that single block of code, you should only add what you care about. To take it to extreme, each line of code would yield certain exceptions but for obvious reason you couldn't do try except for all of them.
Edit:
For the sake of correctness, since you mentioned I don't want my code to break in any case, you could simply do:
try:
# json.load
except Exception as e:
print "Let's just ignore all exceptions, like this one: %s" % str(e)
This is would give you what exception happens as output.
import random
import sys
def main():
"""Demonstrate the handling of various kinds of exceptions."""
# This is like what you are doing in your code.
exceptions = IOError, RuntimeError, ValueError
try:
raise random.choice(exceptions)()
except exceptions as error:
print('Currently handling:', repr(error))
# The following is not much different from Shang Wang's answer.
try:
raise random.choice(exceptions)()
except Exception as error:
print('Currently handling:', repr(error))
# However, the following code will sometimes not handle the exception.
exceptions += SystemExit, KeyboardInterrupt, GeneratorExit
try:
raise random.choice(exceptions)()
except Exception as error:
print('Currently handling:', repr(error))
# The code can be slightly altered to take the new errors into account.
try:
raise random.choice(exceptions)()
except BaseException as error:
print('Currently handling:', repr(error))
# This does not take into account classes not in the exception hierarchy.
class Death:
pass
try:
raise Death()
except BaseException as error:
print('Currently handling:', repr(error))
# If your version of Python does not consider raising an exception from an
# instance of a class not derived from the BaseException class, the way to
# get around this problem would be with the following code instead.
try:
raise Death()
except:
error = sys.exc_info()[1]
print('Currently handling:', repr(error))
if __name__ == '__main__':
main()
I have:
try:
...
except Exception, e:
print "Problem. %s" % str(e)
However, somewhere in try, i will need it to behave as if it encountered an Exception. Is it un-pythonic to do:
try:
...
raise Exception, 'Type 1 error'
...
except Exception, e:
print "Problem. Type 2 error %s" % str(e)
I think this is a bad design. If you need to take some action if (and only if) an exception wasn't raised, that is what the else clause is there for. If you need to take some action unconditionally, that's what finally is for. here's a demonstration:
def myraise(arg):
try:
if arg:
raise ValueError('arg is True')
except ValueError as e:
print(e)
else:
print('arg is False')
finally:
print("see this no matter what")
myraise(1)
myraise(0)
You need to factor the unconditional code into finally and put the other stuff in except/else as appropriate.
I think what you are doing is "unPythonic". Trys should really only cover the small part (ideally one line) of the code which you expect might sometimes fail in a certain way. You should be able to use try/except/else/finally to get the required behaviour:
try:
#line which might fail
except ExceptionType: # the exception type which you are worried about
#what to do if it raises the exception
else:
#this gets done if try is successful
finally:
#this gets done last in both cases (try successful or not)
This question already has answers here:
How can I write a `try`/`except` block that catches all exceptions?
(10 answers)
Closed 1 year ago.
Is it possible to catch any error in Python? I don't care what the specific exceptions will be, because all of them will have the same fallback.
Using except by itself will catch any exception short of a segfault.
try:
something()
except:
fallback()
You might want to handle KeyboardInterrupt separately in case you need to use it to exit your script:
try:
something()
except KeyboardInterrupt:
return
except:
fallback()
There's a nice list of basic exceptions you can catch here. I also quite like the traceback module for retrieving a call stack from the exception. Try traceback.format_exc() or traceback.print_exc() in an exception handler.
try:
# do something
except Exception, e:
# handle it
For Python 3.x:
try:
# do something
except Exception as e:
# handle it
You might want also to look at sys.excepthook:
When an exception is raised and uncaught, the interpreter calls
sys.excepthook with three arguments, the exception class, exception
instance, and a traceback object. In an interactive session this
happens just before control is returned to the prompt; in a Python
program this happens just before the program exits. The handling of
such top-level exceptions can be customized by assigning another
three-argument function to sys.excepthook.
Example:
def except_hook(type, value, tback):
# manage unhandled exception here
sys.__excepthook__(type, value, tback) # then call the default handler
sys.excepthook = except_hook
Quoting the bounty text:
I want to be able to capture ANY exception even weird ones like
keyboard interrupt or even system exit (e.g. if my HPC manger throws
an error) and get a handle to the exception object e, whatever it
might be. I want to process e and custom print it or even send it by
email
Look at the exception hierarchy, you need to catch BaseException:
BaseException
+-- SystemExit
+-- KeyboardInterrupt
+-- GeneratorExit
+-- Exception
This will capture KeyboardInterrupt, SystemExit, and GeneratorExit, which all inherit from BaseException but not from Exception, e.g.
try:
raise SystemExit
except BaseException as e:
print(e.with_traceback)
Not mentioning the type of exception you want to handle itself does the job.
Try this:
try:
#code in which you expect an exception
except:
#prints the exception occured
if you want to know the type of exception that occurred:
try:
# code in which you expect an exception
except Exception as e:
print(e)
# for any exception to be catched
print(type(e))
# to know the type of exception.
for detailed explanation go trough this
https://www.tutorialspoint.com/python/python_exceptions.htm
# in python 3
# if you want the error
try:
func()
except Exception as e:
exceptionFunc(e)
# if you simply want to know an error occurs
try:
func()
except:
exceptionFunc()
# if you don't even wanna do anything
try:
func()
except:
pass
The following only worked for me (both in PY2 and PY3):
try:
# (Anything that produces any kind of error)
except:
ertype = sys.exc_info()[0] # E.g. <class 'PermissionError'>
description = sys.exc_info()[1] # E.g. [Errno 13] Permission denied: ...
# (Handle as needed )
Built-In Exceptions in Python
Built-In exception classes are divided into Base error classes from which the error classes are defined and Concrete error classes which define exceptions which you are more likely to see time to time.
The more detailed document about the buit-In exception can be found in [https://docs.python.org/3/library/exceptions.html]
Custom Exceptions
It is used to fit your specific application situation. For example, you can create your own exception as RecipeNotValidError as the recipe is not valid in your class for developing a cooking app.
Implementation
class RecipeNotValidError(Exception):
def __init__(self):
self.message = "Your recipe is not valid"
try:
raise RecipeNotValidError
except RecipeNotValidError as e:
print(e.message)
These are custom exceptions that are not defined in the standard library. The steps you can follow to create custom classes are :
Subclass the Exception class.
Create a new Exception class of your choice.
Write your code and use the try...except flow to capture and handle your custom exception.