I was trying to understand bitwise NOT in python.
I tried following:
print('{:b}'.format(~ 0b0101))
print(~ 0b0101)
The output is
-110
-6
I tried to understand the output as follows:
Bitwise negating 0101 gives 1010. With 1 in most significant bit, python interprets it as a negative number in 2's complement form and to get back corresponding decimal it further takes 2's complement of 1010 as follows:
1010
0101 (negating)
0110 (adding 1 to get final value)
So it prints it as -110 which is equivalent to -6.
Am I right with this interpretation?
You're half right..
The value is indeed represented by ~x == -(x+1) (add one and invert), but the explanation of why is a little misleading.
Two's compliment numbers require setting the MSB of the integer, which is a little difficult if the number can be an arbitrary number of bits long (as is the case with python). Internally python keeps a separate number (there are optimizations for short numbers however) that tracks how long the digit is. When you print a negative int using the binary format: f'{-6:b}, it just slaps a negative sign in front of the binary representation of the positive value (one's compliment). Otherwise, how would python determine how many leading one's there should be? Should positive values always have leading zeros to indicate they're positive? Internally it does indeed use two's compliment for the math though.
If we consider signed 8 bit numbers (and display all the digits) in 2's compliment your example becomes:
~ 0000 0101: 5
= 1111 1010: -6
So in short, python is performing correct bitwise negation, however the display of negative binary formatted numbers is misleading.
Python integers are arbitrarily long, so if you invert 0b0101, it would be 1111...11111010. How many ones do you write? Well, a 4-bit twos complement -6 is 1010, and a 32-bit twos complement -6 is 11111111111111111111111111111010. So an arbitrarily long -6 could ideally just be written as -6.
Check what happens when ~5 is masked to look at the bits it represents:
>>> ~5
-6
>>> format(~5 & 0xF,'b')
'1010'
>>> format(~5 & 0xFFFF,'b')
'1111111111111010'
>>> format(~5 & 0xFFFFFFFF,'b')
'11111111111111111111111111111010'
>>> format(~5 & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFF,'b')
'11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111010'
A negative decimal representation makes sense and you must mask to limit a representation to a specific number of bits.
This question already has answers here:
bit-wise operation unary ~ (invert)
(5 answers)
Closed 12 months ago.
Just had a doubt about how binary one's complement work.
For example(in python):
a = 60
print(~a)
Gives an output:-
-61
Isn't binary one's complement of 60 is :
a = 0011 1100
~a = 1100 0011
Should it not be -60 ?
I know I'm wrong but why does it shift ahead to -61?
~ is a bitwise inversion operator and it acts exectly as defined:
The bitwise inversion of x is defined as -(x+1).
This is simply how the bitwise inversion of the two's complement representation of an integer works.
The two's complement wheel visualizes this pretty well:
As you can see, the bitwise inversion of 1 is -2, the bitwise inversion of 2 is -3, ..., and the bitwise inversion of 60 will be -61.
In all modern computers, the 2's complement binary is used for representing integers (and not the classical binary representation).
As confirmed in Python docs:
A two's complement binary is same as the classical binary
representation for positive integers but is slightly different for
negative numbers. Negative numbers are represented by performing the
two's complement operation on their absolute value.
The 2's complement of a negative number, -x, is written using the bit pattern for (x-1) with all of the bits complemented (switched from 1 to 0 or 0 to 1).
Example:
2's complement of -15:
-15 => complement(x-1) => complement(15-1) => complement(14) => complement(1110) => 0001
Python's ~ (bitwise NOT) operator returns the 1's complement of the number.
Example:
print(~14) # Outputs -15
14 is (1110) in its 2's complement binary form.
Here, ~14 would invert (i.e. 1's complement) all the bits in this form to 0001.
However, 0001 is actually the 2's complement of -15.
A simple rule to remember the bitwise NOT operation on integers is -(x+1).
print(~60) # Outputs -61
print(~-60) # Outputs 59
You are almost there. 1100 0011 is actually -61.
Here's how a negative binary is converted to decimal:
Invert the bits
Add 1
Convert to decimal
Add negative sign
So:
1100 0011
0011 1100 <-- bits inverted
0011 1101 <-- one added
61 <-- converted to decimal
-61 <-- added negative sign
From wikipedia's Two's complement page:
The two's complement of an N-bit number is defined as its complement with respect to 2^N. For instance, for the three-bit number 010, the two's complement is 110, because 010 + 110 = 1000.
Here 1100 0011's complement is 0011 1101 cuz
1100 0011
+ 0011 1101
-------------
1 0000 0000
There is a byte at a specific index in a byte string which represents eight flags; one flag per bit in the byte. If a flag is set, its corresponding bit is 1, otherwise its 0. For example, if I've got
b'\x21'
the flags would be
0001 0101 # Three flags are set at indexes 0, 2 and 4
# and the others are not set
What would be the best way to get each bit value in that byte, so I know whether a particular flag is set or not? (Preferably using bitwise operations)
Typically, the least-significant bit is bit index 0 and the most-significant bit is bit index 7. Using this terminology, we can determine if bit index k is set by taking the bitwise-and with 1 shifted to the left by k. If the bitwise and is non-zero, then that means that index k has a 1; otherwise, index k has a 0. So:
def get_bit(byteval,idx):
return ((byteval&(1<<idx))!=0);
This will correctly determine the value of bits at indices 0...7 of the byte, going from right-to-left (i.e. the least significant bit to the most significant bit, or equivalently from the 1s place to the 27 = 128 place).
Why it works
I figured I should add an explanation of why it works...
1<<0 is 1 = 0000 0001
1<<1 is 2 = 0000 0010
1<<2 is 4 = 0000 0100
As you can see, 1<<k is equivalent to 2k and contains a 1 at exactly the index we are interested and at no other location. Consequently, the bitwise and with 1<<k will either return 0 or 1<<k; it will be 0 if the bit at the index we are interested in is 0 (because 1 and 0 is 0, and all other bits in 1<<k are zero). If the bit we are interested in is 1, then we get a 1 and a 1 in that position, and a 0 and something else, everywhere else.
x & 1, x & 2, x & 4, x & 8, etc
if those are >0 then the bit 1,2,3,4, etc is set
Specify bit masks (read about bit masks on Wikipedia):
FLAG_1 = 1 # 0000 0001
FLAG_2 = 2 # 0000 0010
FLAG_3 = 4 # 0000 0100
...
And then use AND to check whether a bit is set (flags contains your byte):
if(flags & FLAG_1) { # bit 0 is set, example: 0001 0101 & 0000 0001 = 0000 0001
}
if(flags & FLAG_2) { # bit 1 is set, example: 0001 0101 & 000 0010 = 0000 0000
}
...
Of course you should name FLAG_1, etc to something meaningful, depending on the context. E.g. ENABLE_BORDER.
Update:
I was confused about your comment which bits are set, but after reading another answer I realized your are counting the bits from the wrong end. Bits are numbered zero based from the right.
The function would be:
def get_site_value(byteval, index):
''' Function to get local value at a given index'''
return (byteval >> index) &1
Consider this code:
x = 1 # 0001
x << 2 # Shift left 2 bits: 0100
# Result: 4
x | 2 # Bitwise OR: 0011
# Result: 3
x & 1 # Bitwise AND: 0001
# Result: 1
I can understand the arithmetic operators in Python (and other languages), but I never understood 'bitwise' operators quite well. In the above example (from a Python book), I understand the left-shift but not the other two.
Also, what are bitwise operators actually used for? I'd appreciate some examples.
Bitwise operators are operators that work on multi-bit values, but conceptually one bit at a time.
AND is 1 only if both of its inputs are 1, otherwise it's 0.
OR is 1 if one or both of its inputs are 1, otherwise it's 0.
XOR is 1 only if exactly one of its inputs are 1, otherwise it's 0.
NOT is 1 only if its input is 0, otherwise it's 0.
These can often be best shown as truth tables. Input possibilities are on the top and left, the resultant bit is one of the four (two in the case of NOT since it only has one input) values shown at the intersection of the inputs.
AND | 0 1 OR | 0 1 XOR | 0 1 NOT | 0 1
----+----- ---+---- ----+---- ----+----
0 | 0 0 0 | 0 1 0 | 0 1 | 1 0
1 | 0 1 1 | 1 1 1 | 1 0
One example is if you only want the lower 4 bits of an integer, you AND it with 15 (binary 1111) so:
201: 1100 1001
AND 15: 0000 1111
------------------
IS 9 0000 1001
The zero bits in 15 in that case effectively act as a filter, forcing the bits in the result to be zero as well.
In addition, >> and << are often included as bitwise operators, and they "shift" a value respectively right and left by a certain number of bits, throwing away bits that roll of the end you're shifting towards, and feeding in zero bits at the other end.
So, for example:
1001 0101 >> 2 gives 0010 0101
1111 1111 << 4 gives 1111 0000
Note that the left shift in Python is unusual in that it's not using a fixed width where bits are discarded - while many languages use a fixed width based on the data type, Python simply expands the width to cater for extra bits. In order to get the discarding behaviour in Python, you can follow a left shift with a bitwise and such as in an 8-bit value shifting left four bits:
bits8 = (bits8 << 4) & 255
With that in mind, another example of bitwise operators is if you have two 4-bit values that you want to pack into an 8-bit one, you can use all three of your operators (left-shift, and and or):
packed_val = ((val1 & 15) << 4) | (val2 & 15)
The & 15 operation will make sure that both values only have the lower 4 bits.
The << 4 is a 4-bit shift left to move val1 into the top 4 bits of an 8-bit value.
The | simply combines these two together.
If val1 is 7 and val2 is 4:
val1 val2
==== ====
& 15 (and) xxxx-0111 xxxx-0100 & 15
<< 4 (left) 0111-0000 |
| |
+-------+-------+
|
| (or) 0111-0100
One typical usage:
| is used to set a certain bit to 1
& is used to test or clear a certain bit
Set a bit (where n is the bit number, and 0 is the least significant bit):
unsigned char a |= (1 << n);
Clear a bit:
unsigned char b &= ~(1 << n);
Toggle a bit:
unsigned char c ^= (1 << n);
Test a bit:
unsigned char e = d & (1 << n);
Take the case of your list for example:
x | 2 is used to set bit 1 of x to 1
x & 1 is used to test if bit 0 of x is 1 or 0
what are bitwise operators actually used for? I'd appreciate some examples.
One of the most common uses of bitwise operations is for parsing hexadecimal colours.
For example, here's a Python function that accepts a String like #FF09BE and returns a tuple of its Red, Green and Blue values.
def hexToRgb(value):
# Convert string to hexadecimal number (base 16)
num = (int(value.lstrip("#"), 16))
# Shift 16 bits to the right, and then binary AND to obtain 8 bits representing red
r = ((num >> 16) & 0xFF)
# Shift 8 bits to the right, and then binary AND to obtain 8 bits representing green
g = ((num >> 8) & 0xFF)
# Simply binary AND to obtain 8 bits representing blue
b = (num & 0xFF)
return (r, g, b)
I know that there are more efficient ways to acheive this, but I believe that this is a really concise example illustrating both shifts and bitwise boolean operations.
I think that the second part of the question:
Also, what are bitwise operators actually used for? I'd appreciate some examples.
Has been only partially addressed. These are my two cents on that matter.
Bitwise operations in programming languages play a fundamental role when dealing with a lot of applications. Almost all low-level computing must be done using this kind of operations.
In all applications that need to send data between two nodes, such as:
computer networks;
telecommunication applications (cellular phones, satellite communications, etc).
In the lower level layer of communication, the data is usually sent in what is called frames. Frames are just strings of bytes that are sent through a physical channel. This frames usually contain the actual data plus some other fields (coded in bytes) that are part of what is called the header. The header usually contains bytes that encode some information related to the status of the communication (e.g, with flags (bits)), frame counters, correction and error detection codes, etc. To get the transmitted data in a frame, and to build the frames to send data, you will need for sure bitwise operations.
In general, when dealing with that kind of applications, an API is available so you don't have to deal with all those details. For example, all modern programming languages provide libraries for socket connections, so you don't actually need to build the TCP/IP communication frames. But think about the good people that programmed those APIs for you, they had to deal with frame construction for sure; using all kinds of bitwise operations to go back and forth from the low-level to the higher-level communication.
As a concrete example, imagine some one gives you a file that contains raw data that was captured directly by telecommunication hardware. In this case, in order to find the frames, you will need to read the raw bytes in the file and try to find some kind of synchronization words, by scanning the data bit by bit. After identifying the synchronization words, you will need to get the actual frames, and SHIFT them if necessary (and that is just the start of the story) to get the actual data that is being transmitted.
Another very different low level family of application is when you need to control hardware using some (kind of ancient) ports, such as parallel and serial ports. This ports are controlled by setting some bytes, and each bit of that bytes has a specific meaning, in terms of instructions, for that port (see for instance http://en.wikipedia.org/wiki/Parallel_port). If you want to build software that does something with that hardware you will need bitwise operations to translate the instructions you want to execute to the bytes that the port understand.
For example, if you have some physical buttons connected to the parallel port to control some other device, this is a line of code that you can find in the soft application:
read = ((read ^ 0x80) >> 4) & 0x0f;
Hope this contributes.
I didn't see it mentioned above but you will also see some people use left and right shift for arithmetic operations. A left shift by x is equivalent to multiplying by 2^x (as long as it doesn't overflow) and a right shift is equivalent to dividing by 2^x.
Recently I've seen people using x << 1 and x >> 1 for doubling and halving, although I'm not sure if they are just trying to be clever or if there really is a distinct advantage over the normal operators.
I hope this clarifies those two:
x | 2
0001 //x
0010 //2
0011 //result = 3
x & 1
0001 //x
0001 //1
0001 //result = 1
Think of 0 as false and 1 as true. Then bitwise and(&) and or(|) work just like regular and and or except they do all of the bits in the value at once. Typically you will see them used for flags if you have 30 options that can be set (say as draw styles on a window) you don't want to have to pass in 30 separate boolean values to set or unset each one so you use | to combine options into a single value and then you use & to check if each option is set. This style of flag passing is heavily used by OpenGL. Since each bit is a separate flag you get flag values on powers of two(aka numbers that have only one bit set) 1(2^0) 2(2^1) 4(2^2) 8(2^3) the power of two tells you which bit is set if the flag is on.
Also note 2 = 10 so x|2 is 110(6) not 111(7) If none of the bits overlap(which is true in this case) | acts like addition.
Sets
Sets can be combined using mathematical operations.
The union operator | combines two sets to form a new one containing items in either.
The intersection operator & gets items only in both.
The difference operator - gets items in the first set but not in the second.
The symmetric difference operator ^ gets items in either set, but not both.
Try It Yourself:
first = {1, 2, 3, 4, 5, 6}
second = {4, 5, 6, 7, 8, 9}
print(first | second)
print(first & second)
print(first - second)
print(second - first)
print(first ^ second)
Result:
{1, 2, 3, 4, 5, 6, 7, 8, 9}
{4, 5, 6}
{1, 2, 3}
{8, 9, 7}
{1, 2, 3, 7, 8, 9}
This example will show you the operations for all four 2 bit values:
10 | 12
1010 #decimal 10
1100 #decimal 12
1110 #result = 14
10 & 12
1010 #decimal 10
1100 #decimal 12
1000 #result = 8
Here is one example of usage:
x = raw_input('Enter a number:')
print 'x is %s.' % ('even', 'odd')[x&1]
Another common use-case is manipulating/testing file permissions. See the Python stat module: http://docs.python.org/library/stat.html.
For example, to compare a file's permissions to a desired permission set, you could do something like:
import os
import stat
#Get the actual mode of a file
mode = os.stat('file.txt').st_mode
#File should be a regular file, readable and writable by its owner
#Each permission value has a single 'on' bit. Use bitwise or to combine
#them.
desired_mode = stat.S_IFREG|stat.S_IRUSR|stat.S_IWUSR
#check for exact match:
mode == desired_mode
#check for at least one bit matching:
bool(mode & desired_mode)
#check for at least one bit 'on' in one, and not in the other:
bool(mode ^ desired_mode)
#check that all bits from desired_mode are set in mode, but I don't care about
# other bits.
not bool((mode^desired_mode)&desired_mode)
I cast the results as booleans, because I only care about the truth or falsehood, but it would be a worthwhile exercise to print out the bin() values for each one.
Bit representations of integers are often used in scientific computing to represent arrays of true-false information because a bitwise operation is much faster than iterating through an array of booleans. (Higher level languages may use the idea of a bit array.)
A nice and fairly simple example of this is the general solution to the game of Nim. Take a look at the Python code on the Wikipedia page. It makes heavy use of bitwise exclusive or, ^.
There may be a better way to find where an array element is between two values, but as this example shows, the & works here, whereas and does not.
import numpy as np
a=np.array([1.2, 2.3, 3.4])
np.where((a>2) and (a<3))
#Result: Value Error
np.where((a>2) & (a<3))
#Result: (array([1]),)
i didnt see it mentioned, This example will show you the (-) decimal operation for 2 bit values: A-B (only if A contains B)
this operation is needed when we hold an verb in our program that represent bits. sometimes we need to add bits (like above) and sometimes we need to remove bits (if the verb contains then)
111 #decimal 7
-
100 #decimal 4
--------------
011 #decimal 3
with python:
7 & ~4 = 3 (remove from 7 the bits that represent 4)
001 #decimal 1
-
100 #decimal 4
--------------
001 #decimal 1
with python:
1 & ~4 = 1 (remove from 1 the bits that represent 4 - in this case 1 is not 'contains' 4)..
Whilst manipulating bits of an integer is useful, often for network protocols, which may be specified down to the bit, one can require manipulation of longer byte sequences (which aren't easily converted into one integer). In this case it is useful to employ the bitstring library which allows for bitwise operations on data - e.g. one can import the string 'ABCDEFGHIJKLMNOPQ' as a string or as hex and bit shift it (or perform other bitwise operations):
>>> import bitstring
>>> bitstring.BitArray(bytes='ABCDEFGHIJKLMNOPQ') << 4
BitArray('0x142434445464748494a4b4c4d4e4f50510')
>>> bitstring.BitArray(hex='0x4142434445464748494a4b4c4d4e4f5051') << 4
BitArray('0x142434445464748494a4b4c4d4e4f50510')
the following bitwise operators: &, |, ^, and ~ return values (based on their input) in the same way logic gates affect signals. You could use them to emulate circuits.
To flip bits (i.e. 1's complement/invert) you can do the following:
Since value ExORed with all 1s results into inversion,
for a given bit width you can use ExOR to invert them.
In Binary
a=1010 --> this is 0xA or decimal 10
then
c = 1111 ^ a = 0101 --> this is 0xF or decimal 15
-----------------
In Python
a=10
b=15
c = a ^ b --> 0101
print(bin(c)) # gives '0b101'
You can use bit masking to convert binary to decimal;
int a = 1 << 7;
int c = 55;
for(int i = 0; i < 8; i++){
System.out.print((a & c) >> 7);
c = c << 1;
}
this is for 8 digits you can also do for further more.