I'm doing a jointplot with a basemap, the problem is that when I add the basemap the main plot doesn't have the same size of the marginal plots. I've tried with different parameters without luck. Does anyone have an idea?
import seaborn as sns
import matplotlib.pyplot as plt
import contextily as ctx
import pandas as pd
##exaplme of the data
coords={'longitud':[-62.2037376443, -62.1263309099, -62.1111660957, -62.2094232682, -62.2373117384, -62.4837603464,
-62.4030570833, -62.3975699059, -62.7017114116, -62.7830883096, -62.7786038141, -62.7683234105, -62.7490101452,
-62.7709656745, -63.1002199219, -63.1890252191, -63.1183018549, -63.069960016, -62.7957745659, -63.1715687622,
-63.2156105034, -63.0634381954, -63.2243260588, -63.1153871895, -63.1068292891, -63.103945266, -63.046202785,
-63.1002257551, -63.2076065143, -62.9766391316, -62.9639256604, -62.9911452446, -62.9819984159, -62.9693649898,
-63.066770885, -62.9867441519, -62.9566360192, -62.962616287, -62.835080907, -63.0704805194, -62.8796906301,
-63.0725050601, -63.2224345145, -63.1609069526, -63.0614466072, -62.8847887504, -63.1093652381, -62.822694115,
-63.211982035, -63.1689040153],
'latitud':[8.54644405234, 8.54344899107, 8.54223724187, 8.54290207992, 8.49122679072, 8.48386575122, 8.46450360179,
8.46404720757, 8.35310083084, 8.31701565261, 8.30258604829, 8.29974870902, 8.29281679496, 8.28939264064, 8.28785272804,
8.28221439317, 8.27978694565, 8.27864159366, 8.27634987807, 8.27619269053, 8.27236343925, 8.27258932351, 8.26833993531,
8.267530064, 8.26446669791, 8.26266392333, 8.2641092051, 8.26208837315, 8.26034269744, 8.26123972942, 8.25789799656,
8.25825378832, 8.25833002805, 8.25914612933, 8.2540499893, 8.25347956867, 8.2540932736, 8.25405171513, 8.2478564527,
8.24561857662, 8.2440865055, 8.24256528837, 8.24089278, 8.23877286416, 8.23782626443, 8.23865421655, 8.23733824299,
8.23477115627, 8.23552604027, 8.24327920905]}
df = pd.DataFrame(coords)
OSM_C = 'http://c.tile.openstreetmap.org/{z}/{x}/{y}.png'
joint_axes = sns.jointplot(
x='longitud', y='latitud', data=df, ec="r", s=5)
ctx.add_basemap(joint_axes.ax_joint,crs=4326,attribution=False,url=OSM_C)
adjust(hspace=0, wspace=0)
#plt.tight_layout()
plt.show()
Here is an approach that:
removes the axes sharing in the y-direction to be able to change the aspect to 'datalim'
sets the aspect to 'equal', 'datalim'
sets the y data limits of the marginal plot to be the same as the joint plot; this seems to need a redraw
The following code shows the idea (using imshow, as I don't have contextily installed):
import matplotlib.pyplot as plt
import seaborn as sns
import pandas as pd
import numpy as np
coords = {'longitud' : [-62.2037376443, -62.1263309099, -62.1111660957, -62.2094232682, -62.2373117384, -62.4837603464, -62.4030570833, -62.3975699059, -62.7017114116, -62.7830883096, -62.7786038141, -62.7683234105, -62.7490101452, -62.7709656745, -63.1002199219, -63.1890252191, -63.1183018549, -63.069960016, -62.7957745659, -63.1715687622, -63.2156105034, -63.0634381954, -63.2243260588, -63.1153871895, -63.1068292891, -63.103945266, -63.046202785, -63.1002257551, -63.2076065143, -62.9766391316, -62.9639256604, -62.9911452446, -62.9819984159, -62.9693649898, -63.066770885, -62.9867441519, -62.9566360192, -62.962616287, -62.835080907, -63.0704805194, -62.8796906301, -63.0725050601, -63.2224345145, -63.1609069526, -63.0614466072, -62.8847887504, -63.1093652381, -62.822694115, -63.211982035, -63.1689040153],
'latitud' : [8.54644405234, 8.54344899107, 8.54223724187, 8.54290207992, 8.49122679072, 8.48386575122, 8.46450360179, 8.46404720757, 8.35310083084, 8.31701565261, 8.30258604829, 8.29974870902, 8.29281679496, 8.28939264064, 8.28785272804, 8.28221439317, 8.27978694565, 8.27864159366, 8.27634987807, 8.27619269053, 8.27236343925, 8.27258932351, 8.26833993531, 8.267530064, 8.26446669791, 8.26266392333, 8.2641092051, 8.26208837315, 8.26034269744, 8.26123972942, 8.25789799656, 8.25825378832, 8.25833002805, 8.25914612933, 8.2540499893, 8.25347956867, 8.2540932736, 8.25405171513, 8.2478564527, 8.24561857662, 8.2440865055, 8.24256528837, 8.24089278, 8.23877286416, 8.23782626443, 8.23865421655, 8.23733824299, 8.23477115627, 8.23552604027, 8.24327920905]}
df = pd.DataFrame(coords)
g = sns.jointplot(data=df, x='longitud', y='latitud')
ctx.add_basemap(g.ax_joint,crs=4326,attribution=False,url=OSM_C)
# g.ax_joint.imshow(np.random.rand(20, 10), cmap='spring', interpolation='bicubic',
# extent=[df['longitud'].min(), df['longitud'].max(), df['latitud'].min(), df['latitud'].max()])
for axes in g.ax_joint.get_shared_y_axes():
for ax in axes:
g.ax_joint.get_shared_y_axes().remove(ax)
g.ax_joint.set_aspect('equal', 'datalim')
g.fig.canvas.draw()
g.ax_marg_y.set_ylim(g.ax_joint.get_ylim())
plt.show()
You can still combine this approach with changing the figure's width or height, or adding more whitespace on top or below.
I would like create an plot with to display the last value on line. But i can not create the plot with the last value on chart. Do you have an idea for to resolve my problem, thanks you !
Input :
DataFrame
Plot
Output :
Cross = Last Value In columns
Output Final
# import eikon as ek
import matplotlib.pyplot as plt
import seaborn as sns
import pandas as pd
import numpy as np
import os
import seaborn as sns; sns.set()
import pylab
from scipy import *
from pylab import *
fichier = "P:/GESTION_RPSE/GES - Gestion Epargne Salariale/Dvp Python/Florian/Absolute
Performance/PLOT.csv"
df = pd.read_csv(fichier)
df = df.drop(columns=['Unnamed: 0'])
# sns.set()
plt.figure(figsize=(16, 10))
df = df.melt('Date', var_name='Company', value_name='Value')
#palette = sns.color_palette("husl",12)
ax = sns.lineplot(x="Date", y="Value", hue='Company', data=df).set_title("LaLaLa")
plt.show()
Do you just want to put an 'X' at the end of your lines?
If so, you could pass markerevery=[-1] to the call to lineplot(). However there are a few caveats:
You have to use style= instead of hue= otherwise, there are no markers drawn
Filled markers work better than unfilled markers (like "x"). You can just use markers=True to use the default markers, or pass a list markers=['s','d','o',etc...]
code:
fmri = sns.load_dataset("fmri")
fig, ax = plt.subplots()
ax = sns.lineplot(x="timepoint", y="signal",
style="event", data=fmri, ci=None, markers=True, markevery=[-1], markersize=10)
I can plot multiple histograms in a single plot using pandas but there are few things missing:
How to give the label.
I can only plot one figure, how to change it to layout=(3,1) or something else.
Also, in figure 1, all the bins are filled with solid colors, and its kind of difficult to know which is which, how to fill then with different markers (eg. crosses,slashes,etc)?
Here is the MWE:
import numpy as np
import pandas as pd
import seaborn as sns
import matplotlib.pyplot as plt
df = sns.load_dataset('iris')
df.groupby('species')['sepal_length'].hist(alpha=0.7,label='species')
plt.legend()
Output:
To change layout I can use by keyword, but can't give them colors
HOW TO GIVE DIFFERENT COLORS?
df.hist('sepal_length',by='species',layout=(3,1))
plt.tight_layout()
Gives:
You can resolve to groupby:
fig,ax = plt.subplots()
hatches = ('\\', '//', '..') # fill pattern
for (i, d),hatch in zip(df.groupby('species'), hatches):
d['sepal_length'].hist(alpha=0.7, ax=ax, label=i, hatch=hatch)
ax.legend()
Output:
In pandas version 1.1.0 you can simply set the legend keyword to true.
import numpy as np
import pandas as pd
import seaborn as sns
import matplotlib.pyplot as plt
df = sns.load_dataset('iris')
df.groupby('species')['sepal_length'].hist(alpha=0.7, legend = True)
output image
It's more code, but using pure matplotlib will always give you more control over the plots. For your second case:
import matplotlib.pyplot as plt
import numpy as np
from itertools import zip_longest
# Dictionary of color for each species
color_d = dict(zip_longest(df.species.unique(),
plt.rcParams['axes.prop_cycle'].by_key()['color']))
# Use the same bins for each
xmin = df.sepal_length.min()
xmax = df.sepal_length.max()
bins = np.linspace(xmin, xmax, 20)
# Set up correct number of subplots, space them out.
fig, ax = plt.subplots(nrows=df.species.nunique(), figsize=(4,8))
plt.subplots_adjust(hspace=0.4)
for i, (lab, gp) in enumerate(df.groupby('species')):
ax[i].hist(gp.sepal_length, ec='k', bins=bins, color=color_d[lab])
ax[i].set_title(lab)
# same xlim for each so we can see differences
ax[i].set_xlim(xmin, xmax)
I need to change the colors of the boxplot drawn using pandas utility function. I can change most properties using the color argument but can't figure out how to change the facecolor of the box. Someone knows how to do it?
import pandas as pd
import numpy as np
data = np.random.randn(100, 4)
labels = list("ABCD")
df = pd.DataFrame(data, columns=labels)
props = dict(boxes="DarkGreen", whiskers="DarkOrange", medians="DarkBlue", caps="Gray")
df.plot.box(color=props)
While I still recommend seaborn and raw matplotlib over the plotting interface in pandas, it turns out that you can pass patch_artist=True as a kwarg to df.plot.box, which will pass it as a kwarg to df.plot, which will pass is as a kwarg to matplotlib.Axes.boxplot.
import pandas as pd
import numpy as np
data = np.random.randn(100, 4)
labels = list("ABCD")
df = pd.DataFrame(data, columns=labels)
props = dict(boxes="DarkGreen", whiskers="DarkOrange", medians="DarkBlue", caps="Gray")
df.plot.box(color=props, patch_artist=True)
As suggested, I ended up creating a function to plot this, using raw matplotlib.
def plot_boxplot(data, ax):
bp = ax.boxplot(data.values, patch_artist=True)
for box in bp['boxes']:
box.set(color='DarkGreen')
box.set(facecolor='DarkGreen')
for whisker in bp['whiskers']:
whisker.set(color="DarkOrange")
for cap in bp['caps']:
cap.set(color="Gray")
for median in bp['medians']:
median.set(color="white")
ax.axhline(0, color="DarkBlue", linestyle=":")
ax.set_xticklabels(data.columns)
I suggest using df.plot.box with patch_artist=True and return_type='both' (which returns the matplotlib axes the boxplot is drawn on and a dictionary whose values are the matplotlib Lines of the boxplot) in order to have the best customization possibilities.
For example, given this data:
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
df = pd.DataFrame(
data=np.random.randn(100, 4),
columns=list("ABCD")
)
you can set a specific color for all the boxes:
fig,ax = plt.subplots(figsize=(9,6))
ax,props = df.plot.box(patch_artist=True, return_type='both', ax=ax)
for patch in props['boxes']:
patch.set_facecolor('lime')
plt.show()
you can set a specific color for each box:
colors = ['green','blue','yellow','red']
fig,ax = plt.subplots(figsize=(9,6))
ax,props = df.plot.box(patch_artist=True, return_type='both', ax=ax)
for patch,color in zip(props['boxes'],colors):
patch.set_facecolor(color)
plt.show()
you can easily integrate a colormap:
colors = np.random.randint(0,10, 4)
cm = plt.cm.get_cmap('rainbow')
colors_cm = [cm((c-colors.min())/(colors.max()-colors.min())) for c in colors]
fig,ax = plt.subplots(figsize=(9,6))
ax,props = df.plot.box(patch_artist=True, return_type='both', ax=ax)
for patch,color in zip(props['boxes'],colors_cm):
patch.set_facecolor(color)
# to add colorbar
fig.colorbar(plt.cm.ScalarMappable(
plt.cm.colors.Normalize(min(colors),max(colors)),
cmap='rainbow'
), ax=ax, cmap='rainbow')
plt.show()