Develop Reference

ConnectionRefusedError: [Errno 111] Connection refused between laptop and raspberry pi using python

I am a beginner in socket communication and I wanted to test this code.
I wrote the same code but changed the host in the server to s.gethostname() when both the client and server were on my laptop and worked normally.
server: Laptop
import socket
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
host = ''
port = 62402
s.bind((host,port))
s.listen(5)
while True:
clientsocket, address = s.accept()
print(f"connection from {address} has been established!")
clientsocket.send(bytes("Welcome to the server!","utf-8"))
client: raspberry pi
import socket
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
host = socket.gethostname()
port = 62402
s.connect((host,port))
msg = s.recv(1024)
print(msg.decode('utf-8')
Error
Traceback(most recent call last):
File "/home/pi/Desktop/testting/client.py", line 6, in <module>
s.connect((host,port))
ConnectionRefusedError: [Error 111] Connection refused

Connection refused tells me that [the target] is not accepting the connection.
I don’t think ´socket.gethostname()´ can possibly return the laptop’s hostname in its current form.
´print()´ what it returns - I’d bet it’s the local machine’s hostname (the one creating the connection).
Once you know where you’re connecting to, Things that could go wrong:
Is your target listening for a connection on port 62402?
Will its firewall allow such traffic in?

Python socket connection not working over Local Network

I'm trying to get two computers (my PC and my laptop) to communicate over the Local Network using the Socket module in python.
This is the Server side code running on my PC (connected via LAN):
import socket
HOST = '192.168.1.3' #local PC IP
print(HOST)
PORT = 8080 # Port to listen on (non-privileged ports are > 1023)
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.bind((HOST, PORT))
s.listen()
conn, addr = s.accept()
with conn:
print('Connected by', addr)
while True:
data = conn.recv(1024)
print(data)
if not data:
break
conn.sendall(data)
And this is the Client side code, running on my Laptop (connected over WiFi):
import socket
TCP_IP = '192.168.1.3'
TCP_PORT = 8080
BUFFER_SIZE = 1024
MESSAGE = b"Hello, World!"
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((TCP_IP, TCP_PORT))
s.send(MESSAGE)
data = s.recv(BUFFER_SIZE)
s.close()
print("received data:", data)
The thing is: when I execute both codes, the Server side stays idle waiting for a connection and the Client side, after a while stops and returns the following timeout error:
Traceback (most recent call last):
File "C:\Users\...\client.py", line 13, in <module>
s.connect((TCP_IP, TCP_PORT))
TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
I can't understand why it won't connect from another device in the same network while it works perfectly if I execute the Client code on the same machine as the Server, even if when I run netstat -an in the CMD I can see the computer listening on that port:
TCP 192.168.1.3:8080 0.0.0.0:0 LISTENING
I tough it had something to do with the port forwarding so I tried playing around with it but I'm having troubles with that too (the ports seem to remain closed).
I really don't know what to do next, if you have some advice or know something else I could try please reply.

It actually was a firewall problem, I just needed to disable the windows defender firewall for the local network and now everything is working fine

In Windows 10, I had to open the port I was using for the socket, and it worked for me.
Here is a link to the instructions.

You're listening and connecting to the same IP - you need to listen to the client's IP(or just any IP with the correct port number) on the server and connect to the server's IP on the client.
For example, if the client's IP is 1.2.3.4 and the server's is 1.2.3.5, then
# server side
s.bind(('1.2.3.4', 8080)) # CLIENT_IP = '1.2.3.4'; PORT = 8080
# can also be s.bind(('0.0.0.0', 8080)) if you want multiple clients to connect.
# client side
s.connect(('1.2.3.5', 8080)) # SERVER_IP = '1.2.3.5'; PORT = 8080

OSError: [WinError 10013] An attempt was made to access a socket in a way forbidden by its access permissions.What to do?

I created a simple socket program by python by creating two different files Server.py and a Client.py and tried to connect it by s.connect((host,port)) but
OSError: [WinError 10013] An attempt was made to access a socket in a way forbidden by its access permissions
occurs
I have looked up many solutions on the net regarding this issue which could be due to Firewall issues, Malware in system, outbound firewall settings , Run by Administrator, even checked if the port was not in use by netstat in cmd but none of them solved my issue.
plz help
Error Image
This is my code:
#SERVER.py
import socket
s= socket.socket()
host= socket.gethostname()
port = 5000
s.bind((host,port))
s.listen(1)
print(host)
print('Waiting for any incoming connections...')
conn, addr = s.accept()
print(addr,'Has connected to the server')
#CLIENT.py
import socket
s = socket.socket()
host=input('Enter host address:')
port=5000
s.connect((host,port))
print('Connected...')

Try localhost, if host is not working. Like for eg. host='127.0.0.1' #( The server's hostname or IP address)and use a port >1023 (As those are non-privileged ports)
If its still not working, you can try changing your network and try the same steps. If any further issue occurs regarding the same error there must be a issue with your system, for that try factory reset. Then it will work 100%
Best of luck.

Connecting to a simple sockets python server remotely

I am trying to setup a very simply sockets app. My server code is:
import socket
s = socket.socket()
host = socket.gethostname()
port = 1234
s.bind((host,port))
s.listen(5) #Here we wait for a client connection
while True:
c, addr = s.accept()
print "Got a connection from: ", addr
c.send("Thanks for connecting")
c.close()
I placed this file on my remote Linode server and run it using python server.py. I have checked that the port is open using nap:
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
1234/tcp open hotline
I now run the client.py on my local machine:
import socket # Import socket module
s = socket.socket() # Create a socket object
port = 1234 # Reserve a port for your service.
s.connect(("139.xxx.xx.xx", port))
print s.recv(1024)
s.close # Close the socket when done
However I am not getting any kind of activity or report of connection. Could someone give me some pointers to what I might have to do? Do I need to include the hostname in the IP address I specify in the client.py? Any help would be really appreciated!

I've just summarize our comments, so your problem is this:
When you trying to using the client program connect to the server via the Internet, not LAN.
You should configure the
port mapping on your router.
And however, you just need configure the
port mapping for your server machine.
After you did that, then you can use the client program connect to your server prigram.

Why am I getting the error "connection refused" in Python? (Sockets)

I'm new to Sockets, please excuse my complete lack of understanding.
I have a server script(server.py):
#!/usr/bin/python
import socket #import the socket module
s = socket.socket() #Create a socket object
host = socket.gethostname() #Get the local machine name
port = 12397 # Reserve a port for your service
s.bind((host,port)) #Bind to the port
s.listen(5) #Wait for the client connection
while True:
c,addr = s.accept() #Establish a connection with the client
print "Got connection from", addr
c.send("Thank you for connecting!")
c.close()
and client script (client.py):
#!/usr/bin/python
import socket #import socket module
s = socket.socket() #create a socket object
host = '192.168.1.94' #Host i.p
port = 12397 #Reserve a port for your service
s.connect((host,port))
print s.recv(1024)
s.close
I go to my desktop terminal and start the script by typing:
python server.py
after which, I go to my laptop terminal and start the client script:
python client.py
but I get the following error:
File "client.py", line 9, in
s.connect((host,port))
File "/usr/lib/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
socket.error: [Errno 111] Connection refused
I've tried using different port numbers to no avail. However, I was able to get the host name using the same ip and the gethostname() method in the client script and I can ping the desktop (server).

Instead of
host = socket.gethostname() #Get the local machine name
port = 12397 # Reserve a port for your service
s.bind((host,port)) #Bind to the port
you should try
port = 12397 # Reserve a port for your service
s.bind(('', port)) #Bind to the port
so that the listening socket isn't too restricted. Maybe otherwise the listening only occurs on one interface which, in turn, isn't related with the local network.
One example could be that it only listens to 127.0.0.1, which makes connecting from a different host impossible.

This error means that for whatever reason the client cannot connect to the port on the computer running server script. This can be caused by few things, like lack of routing to the destination, but since you can ping the server, it should not be the case. The other reason might be that you have a firewall somewhere between your client and the server - it could be on server itself or on the client. Given your network addressing, I assume both server and client are on the same LAN, so there shouldn't be any router/firewall involved that could block the traffic. In this case, I'd try the following:
check if you really have that port listening on the server (this should tell you if your code does what you think it should): based on your OS, but on linux you could do something like netstat -ntulp
check from the server, if you're accepting the connections to the server: again based on your OS, but telnet LISTENING_IP LISTENING_PORT should do the job
check if you can access the port of the server from the client, but not using the code: just us the telnet (or appropriate command for your OS) from the client
and then let us know the findings.

Assume s = socket.socket()
The server can be bound by following methods:
Method 1:
host = socket.gethostname()
s.bind((host, port))
Method 2:
host = socket.gethostbyname("localhost") #Note the extra letters "by"
s.bind((host, port))
Method 3:
host = socket.gethostbyname("192.168.1.48")
s.bind((host, port))
If you do not exactly use same method on the client side, you will get the error: socket.error errno 111 connection refused.
So, you have to use on the client side exactly same method to get the host, as you do on the server. For example, in case of client, you will correspondingly use following methods:
Method 1:
host = socket.gethostname()
s.connect((host, port))
Method 2:
host = socket.gethostbyname("localhost") # Get local machine name
s.connect((host, port))
Method 3:
host = socket.gethostbyname("192.168.1.48") # Get local machine name
s.connect((host, port))
Hope that resolves the problem.

host = socket.gethostname() # Get the local machine name
port = 12397 # Reserve a port for your service
s.bind((host,port)) # Bind to the port
I think this error may related to the DNS resolution.
This sentence host = socket.gethostname() get the host name, but if the operating system can not resolve the host name to local address, you would get the error.
Linux operating system can modify the /etc/hosts file, add one line in it. It looks like below( 'hostname' is which socket.gethostname() got).
127.0.0.1 hostname

in your server.py file make : host ='192.168.1.94' instead of host = socket.gethostname()

Pay attention to change the port number. Sometimes, you need just to change the port number. I experienced that when i made changes over changes over syntax and functions.

I was being able to ping my connection but was STILL getting the 'connection refused' error. Turns out I was pinging myself! That's what the problem was.

I was getting the same problem in my code, and after thow days of search i finally found the solution, and the problem is the function socket.gethostbyname(socket.gethostname) doesnt work in linux so instead of that you have to use socket.gethostbyname('put the hostname manually') not socket.gethostbyname('localhost'), use socket.gethostbyname('host') looking with ifconfig.

try this command in terminal:
sudo ufw enable
ufw allow 12397