I'm new to Sockets, please excuse my complete lack of understanding.
I have a server script(server.py):
#!/usr/bin/python
import socket #import the socket module
s = socket.socket() #Create a socket object
host = socket.gethostname() #Get the local machine name
port = 12397 # Reserve a port for your service
s.bind((host,port)) #Bind to the port
s.listen(5) #Wait for the client connection
while True:
c,addr = s.accept() #Establish a connection with the client
print "Got connection from", addr
c.send("Thank you for connecting!")
c.close()
and client script (client.py):
#!/usr/bin/python
import socket #import socket module
s = socket.socket() #create a socket object
host = '192.168.1.94' #Host i.p
port = 12397 #Reserve a port for your service
s.connect((host,port))
print s.recv(1024)
s.close
I go to my desktop terminal and start the script by typing:
python server.py
after which, I go to my laptop terminal and start the client script:
python client.py
but I get the following error:
File "client.py", line 9, in
s.connect((host,port))
File "/usr/lib/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
socket.error: [Errno 111] Connection refused
I've tried using different port numbers to no avail. However, I was able to get the host name using the same ip and the gethostname() method in the client script and I can ping the desktop (server).
Instead of
host = socket.gethostname() #Get the local machine name
port = 12397 # Reserve a port for your service
s.bind((host,port)) #Bind to the port
you should try
port = 12397 # Reserve a port for your service
s.bind(('', port)) #Bind to the port
so that the listening socket isn't too restricted. Maybe otherwise the listening only occurs on one interface which, in turn, isn't related with the local network.
One example could be that it only listens to 127.0.0.1, which makes connecting from a different host impossible.
This error means that for whatever reason the client cannot connect to the port on the computer running server script. This can be caused by few things, like lack of routing to the destination, but since you can ping the server, it should not be the case. The other reason might be that you have a firewall somewhere between your client and the server - it could be on server itself or on the client. Given your network addressing, I assume both server and client are on the same LAN, so there shouldn't be any router/firewall involved that could block the traffic. In this case, I'd try the following:
check if you really have that port listening on the server (this should tell you if your code does what you think it should): based on your OS, but on linux you could do something like netstat -ntulp
check from the server, if you're accepting the connections to the server: again based on your OS, but telnet LISTENING_IP LISTENING_PORT should do the job
check if you can access the port of the server from the client, but not using the code: just us the telnet (or appropriate command for your OS) from the client
and then let us know the findings.
Assume s = socket.socket()
The server can be bound by following methods:
Method 1:
host = socket.gethostname()
s.bind((host, port))
Method 2:
host = socket.gethostbyname("localhost") #Note the extra letters "by"
s.bind((host, port))
Method 3:
host = socket.gethostbyname("192.168.1.48")
s.bind((host, port))
If you do not exactly use same method on the client side, you will get the error: socket.error errno 111 connection refused.
So, you have to use on the client side exactly same method to get the host, as you do on the server. For example, in case of client, you will correspondingly use following methods:
Method 1:
host = socket.gethostname()
s.connect((host, port))
Method 2:
host = socket.gethostbyname("localhost") # Get local machine name
s.connect((host, port))
Method 3:
host = socket.gethostbyname("192.168.1.48") # Get local machine name
s.connect((host, port))
Hope that resolves the problem.
host = socket.gethostname() # Get the local machine name
port = 12397 # Reserve a port for your service
s.bind((host,port)) # Bind to the port
I think this error may related to the DNS resolution.
This sentence host = socket.gethostname() get the host name, but if the operating system can not resolve the host name to local address, you would get the error.
Linux operating system can modify the /etc/hosts file, add one line in it. It looks like below( 'hostname' is which socket.gethostname() got).
127.0.0.1 hostname
in your server.py file make : host ='192.168.1.94' instead of host = socket.gethostname()
Pay attention to change the port number. Sometimes, you need just to change the port number. I experienced that when i made changes over changes over syntax and functions.
I was being able to ping my connection but was STILL getting the 'connection refused' error. Turns out I was pinging myself! That's what the problem was.
I was getting the same problem in my code, and after thow days of search i finally found the solution, and the problem is the function socket.gethostbyname(socket.gethostname) doesnt work in linux so instead of that you have to use socket.gethostbyname('put the hostname manually') not socket.gethostbyname('localhost'), use socket.gethostbyname('host') looking with ifconfig.
try this command in terminal:
sudo ufw enable
ufw allow 12397
Related
I created a simple socket program by python by creating two different files Server.py and a Client.py and tried to connect it by s.connect((host,port)) but
OSError: [WinError 10013] An attempt was made to access a socket in a way forbidden by its access permissions
occurs
I have looked up many solutions on the net regarding this issue which could be due to Firewall issues, Malware in system, outbound firewall settings , Run by Administrator, even checked if the port was not in use by netstat in cmd but none of them solved my issue.
plz help
Error Image
This is my code:
#SERVER.py
import socket
s= socket.socket()
host= socket.gethostname()
port = 5000
s.bind((host,port))
s.listen(1)
print(host)
print('Waiting for any incoming connections...')
conn, addr = s.accept()
print(addr,'Has connected to the server')
#CLIENT.py
import socket
s = socket.socket()
host=input('Enter host address:')
port=5000
s.connect((host,port))
print('Connected...')
Try localhost, if host is not working. Like for eg. host='127.0.0.1' #( The server's hostname or IP address)and use a port >1023 (As those are non-privileged ports)
If its still not working, you can try changing your network and try the same steps. If any further issue occurs regarding the same error there must be a issue with your system, for that try factory reset. Then it will work 100%
Best of luck.
I am currently working on a Python project to control my PC remotely from across networks. Currently I have a portmap.io connection set up, (IP: 193.xxx.xxx.xx with port 1234, I’m using an OpenVPN)
When I run my Python script:
import socket
from os import system, name
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
HOST = “193.xxx.xxx.xx”
PORT = 1234
s.bind((HOST,PORT))
s.listen(1)
conn, addr = s.accept()
s.send(b”Connection established”.encode(“utf-8”))
When I run this Python script, I get this error:
OSError: [WinError 10049] The requested address is not valid in its context
I’m almost 85% sure this is because you can’t use bind() on an ip, so what should I do? The socket needs to go across networks.
(SOLVED)
I used ngrok to create a tcp tunnel and used 0.0.0.0 as my local host, and used the provided details for the remote connection
I'm using the socket module from Python 3.7 (shouldn't matter, as I tried activating a different Python version from different venv's).
The problem is that I've created a TCP connection listening at port 65432, an arbitrary number that I selected for this simple demo.
server.py looks like the following:
import socket
HOST = '127.0.0.1' # Standard loopback interface address (localhost)
PORT = 65432 # Non-privileged ports are > 1024
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.bind((HOST, PORT))
s.listen()
conn, addr = s.accept()
with conn:
print('Connected by', addr)
while True:
data = conn.recv(1024)
if not data:
break
conn.sendall(data)
client.py is relatively straightforward as it makes a connection with 127.0.0.1:65432.
import socket
HOST = '127.0.0.1' # The server's hostname or IP address
PORT = 65432 # Port used by the server
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.connect((HOST, PORT))
# Send its message and then read the server's reply and prints it
s.sendall(b'Hello, world')
data = s.recv(1024)
print('Received', repr(data))
Executing server.py to open the port 65432 for listening (in first console) and then executing client.py to send a simple 'hello world' message (in a second console). This is what got printed to the first console:
Connected by ('127.0.0.1', 56051)
So far so good. Port 56051 connecting to port 65432, right? No.
I execute netstat -am (command tool utility to see state of sockets on the host machine) and found this:
Active Internet connections (including servers)
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 0 127.0.0.1.51495 *.* LISTEN
Instead of 127.0.0.1.65432 as local address, it is using port 51495 instead.
Doing another verification check, this time firing off lsof -i -n:
COMMAND PID FD TYPE DEVICE SIZE/OFF NODE NAME
Code\x20H 51214 37u IPv4 0x1af15eb424ba89f3 0t0 TCP 127.0.0.1:51495 (LISTEN)
Both verifications confirmed that port 51495 is being used instead of 65432 as specified in my server.py and client.py scripts. Any leads or tips? Many thanks in advance!
65432 is the port number of your server socket, not your client socket. As the client end is not attached with any specific port number, it will be dynamically allocated with port number, every time you run the client code.
As far as I understood, you mentioned -
Connected by ('127.0.0.1', 56051)
is shown on the first console which is your server console. so this port number is port number of client socket. not the server socket.
In the server code, you are using, s.accept(), this function returns the connection temporary id and the address of the client which made the request. same thing you are trying to print in the code.
As #ottomeister pointed out, the process name was the first giveaway. The process name should have been Python but it showed VS Code instead, which is indicative that the port 51495 is opened by the VS Code process and has nothing to do with our socket module code.
The way the context manager was setup means that the connection will be closed the moment the last line (in this case, socket.sendall()) is executed. So the server socket is not active anymore.
I run netstat after the client socket has connected, by this point the server port is closed.
When I monitor the ports status while the server port is open (before the client socket connects with it) then sure enough 65432 is what appeared. This is confirmed in netstat, lsof and also nmap. A simple print statement after the socket connection is successful will also confirmed that the server port is in fact using the specified port number, which is 65432.
Sorry for the inconvenience, and again much appreciation to Ottomeister for first pointing this out.
I am trying to setup a very simply sockets app. My server code is:
import socket
s = socket.socket()
host = socket.gethostname()
port = 1234
s.bind((host,port))
s.listen(5) #Here we wait for a client connection
while True:
c, addr = s.accept()
print "Got a connection from: ", addr
c.send("Thanks for connecting")
c.close()
I placed this file on my remote Linode server and run it using python server.py. I have checked that the port is open using nap:
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
1234/tcp open hotline
I now run the client.py on my local machine:
import socket # Import socket module
s = socket.socket() # Create a socket object
port = 1234 # Reserve a port for your service.
s.connect(("139.xxx.xx.xx", port))
print s.recv(1024)
s.close # Close the socket when done
However I am not getting any kind of activity or report of connection. Could someone give me some pointers to what I might have to do? Do I need to include the hostname in the IP address I specify in the client.py? Any help would be really appreciated!
I've just summarize our comments, so your problem is this:
When you trying to using the client program connect to the server via the Internet, not LAN.
You should configure the
port mapping on your router.
And however, you just need configure the
port mapping for your server machine.
After you did that, then you can use the client program connect to your server prigram.
This is the server side program
import socket
s = socket.socket()
host = socket.gethostname()
port = 9077
s.bind((host,port))
s.listen(5)
while True:
c, addr = s.accept()
print("Connection accepted from " + repr(addr[1]))
c.send("Thank you for connecting")
c.close()
This is the client program
import socket
s = socket.socket()
host = socket.gethostname()
port = 9077
s.connect((host, port))
print s.recv(1024)
When i run these two programs on the same computer, it works perfectly.
But when i run the client and server programs in two different computers on the same network, the program doesn't work.
Can anyone please tell me how to send message from one computer to another on the same network.
This is the first time i'm doing any network programming. Any help would be appreciated
Thanks in advance
You are connecting from the client to the client's computer, or well attempting to, because you are using the client's hostname rather than the servers hostname/ip address.
So, to fix this change the line s.connect((host, port)) so that the host points to the servers ip address instead of the client's hostname.
You can find this by looking at your network settings on the server and doing the following:
host = "the ip found from the server's network settings"
host must be edited to the server's ip if the server is not the same computer.