I'm trying to install TkFontAwesome using python -m pip install tkfontawesome, but always get the following error:
Collecting tkfontawesome
Using cached tkfontawesome-0.2.0-py3-none-any.whl (405 kB)
Collecting tksvg==0.7.4
Using cached tksvg-0.7.4.tar.gz (50 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [12 lines of output]
Installing dependency cmake... Traceback (most recent call last):
File "<string>", line 36, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\myuser\AppData\Local\Temp\pip-install-2krbeh5s\tksvg_7491a69795da43779e9e71e527849349\setup.py", line 62, in <module>
sp.call(["pacman", "--needed", "--noconfirm", "-S", "mingw-w64-x86_64-{}".format(dep)]) # , stdout=sp.PIPE)
File "C:\Users\myuser\AppData\Local\Programs\Thonny\lib\subprocess.py", line 339, in call
with Popen(*popenargs, **kwargs) as p:
File "C:\Users\myuser\AppData\Local\Programs\Thonny\lib\subprocess.py", line 800, in __init__
restore_signals, start_new_session)
File "C:\Users\myuser\AppData\Local\Programs\Thonny\lib\subprocess.py", line 1207, in _execute_child
startupinfo)
FileNotFoundError: [WinError 2] The system cannot find the file specified
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Never had any problems installing packages using pip before. The file subprocess.py IS in \Thonny\lib\ if this WinError 2 means that.
I'm using:
Python 3.7.7
pip 22.0.3
Tk 8.6.9
Thonny 3.2.7
Windows 10
So far i've tried:
to update my pip and setuptools (they're already up-to-date)
to install TkFontAwesome using ez_setup
to install TkFontAwesome using --use-deprecated=backtrack-on-build-failures
No use. Anyone have any ideas what to do next? Thanks in advance.
Try add this after your pip3 install package:
--use-deprecated=backtrack-on-build-failures
eg, if you want:
pip3 install imageAI
then:
pip3 install imageAI --use-deprecated=backtrack-on-build-failures
copy from there.
Related
Installing wxpython with pip gives the error ModuleNotFoundError: No module named 'attrdict'
Details:
py -3.10-64 -m pip install -U wxpython
Collecting wxpython
Using cached wxPython-4.2.0.tar.gz (71.0 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [8 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\Bernard\AppData\Local\Temp\pip-install-dokcizpt\wxpython_662eefb4314c47eba7b194b4d07a8e18\setup.py", line 27, in <module>
from buildtools.config import Config, msg, opj, runcmd, canGetSOName, getSOName
File "C:\Users\Bernard\AppData\Local\Temp\pip-install-dokcizpt\wxpython_662eefb4314c47eba7b194b4d07a8e18\buildtools\config.py", line 30, in <module>
from attrdict import AttrDict
ModuleNotFoundError: No module named 'attrdict'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
What works
installing other packages works, e.g.
py -3.10-64 -m pip install -U mido
Requirement already satisfied: mido in c:\python311\lib\site-packages (1.2.10)
Version info
Windows 10 22H2
pip 23.0.1 from C:\Python311\Lib\site-packages\pip (python 3.11)
Context
This is used in the fluidpatcher installer, I logged a bug here.
Update 1
Seems to be a known issue reported here: https://github.com/wxWidgets/Phoenix/issues/2296
Tried workaround of manually installing
py -3.10-64 -m pip install -U attrdict3
Which installs.
Then retried the wxpython install
py -3.10-64 -m pip install -U wxpython
Which fails, this time with a different error message
Collecting wxpython
Using cached wxPython-4.2.0.tar.gz (71.0 MB)
Preparing metadata (setup.py) ... done
Requirement already satisfied: pillow in c:\python311\lib\site-packages (from wxpython) (9.4.0)
Requirement already satisfied: six in c:\python311\lib\site-packages (from wxpython) (1.16.0)
Requirement already satisfied: numpy in c:\python311\lib\site-packages (from wxpython) (1.24.2)
Installing collected packages: wxpython
DEPRECATION: wxpython is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
Running setup.py install for wxpython ... error
error: subprocess-exited-with-error
× Running setup.py install for wxpython did not run successfully.
│ exit code: 1
╰─> [49 lines of output]
C:\Python311\Lib\site-packages\setuptools\dist.py:771: UserWarning: Usage of dash-separated 'license-file' will not be supported in future versions. Please use the underscore name 'license_file' instead
warnings.warn(
C:\Python311\Lib\site-packages\setuptools\config\setupcfg.py:508: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead.
warnings.warn(msg, warning_class)
C:\Python311\Lib\site-packages\setuptools\dist.py:317: DistDeprecationWarning: use_2to3 is ignored.
warnings.warn(f"{attr} is ignored.", DistDeprecationWarning)
running install
C:\Python311\Lib\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
Will build using: "C:\Python311\python.exe"
3.11.0 (main, Oct 24 2022, 18:26:48) [MSC v.1933 64 bit (AMD64)]
Python's architecture is 64bit
cfg.VERSION: 4.2.0
Running command: build
Running command: build_wx
Command '"C:\Python311\python.exe" -c "import os, sys, setuptools.msvc; setuptools.msvc.isfile = lambda path: path is not None and os.path.isfile(path); ei = setuptools.msvc.EnvironmentInfo('x64', vc_min_ver=14.0); env = ei.return_env(); env['vc_ver'] = ei.vc_ver; env['vs_ver'] = ei.vs_ver; env['arch'] = ei.pi.arch; env['py_ver'] = sys.version_info[:2]; print(env)"' failed with exit code 1.
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 1120, in __init__
self.si = SystemInfo(self.ri, vc_ver)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 596, in __init__
vc_ver or self._find_latest_available_vs_ver())
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 610, in _find_latest_available_vs_ver
raise distutils.errors.DistutilsPlatformError(
distutils.errors.DistutilsPlatformError: No Microsoft Visual C++ version found
Finished command: build_wx (0m1.80s)
Finished command: build (0m1.80s)
WARNING: Building this way assumes that all generated files have been
generated already. If that is not the case then use build.py directly
to generate the source and perform the build stage. You can use
--skip-build with the bdist_* or install commands to avoid this
message and the wxWidgets and Phoenix build steps in the future.
"C:\Python311\python.exe" -u build.py build
Command '"C:\Python311\python.exe" -u build.py build' failed with exit code 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> wxpython
I am trying to install the python package py-pde.
My current python version is 3.9.
I pip install using the command 'pip install py-pde' on the terminal.
However, when I try to install it on my IDE - PyCharm - I get this error:
Collecting py-pde
Using cached py_pde-0.27.1-py3-none-any.whl (269 kB)
Requirement already satisfied: matplotlib>=3.1.0 in /Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11/site-packages (from py-pde) (3.6.2)
Collecting numba>=0.56.0
Using cached numba-0.56.4.tar.gz (2.4 MB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'error'
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [8 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/private/var/folders/sl/b99vml7s45q3zx3wb1fqvq240000gp/T/pip-install-pu5ucxpg/numba_1e4a8190083b40fba0897686608f79d0/setup.py", line 51, in <module>
_guard_py_ver()
File "/private/var/folders/sl/b99vml7s45q3zx3wb1fqvq240000gp/T/pip-install-pu5ucxpg/numba_1e4a8190083b40fba0897686608f79d0/setup.py", line 48, in _guard_py_ver
raise RuntimeError(msg.format(cur_py, min_py, max_py))
RuntimeError: Cannot install on Python version 3.11.0; only versions >=3.7,<3.11 are supported.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Any ideas what's wrong here?
Specifically, it says can't install on Python 3.11, even though I checked my python version using pip --version to be 3.9.
Not sure what's wrong. Help appreciated.
Should be as simple as alt+ctrl+s to go to settings.
Then navigate to Project: "Your project" >> Python Interpreter. Then just browse to the interpreter you want to use instead of 3.11.
Edit: Here's a link to JetBrains (PyCharm parent company) documentation that covers changing your interpreter.
This question already has answers here:
Python pygame not installing
(3 answers)
How do I install pip on Windows?
(40 answers)
Closed last month.
This is what happens everytime I run this code "pip3 install pygame"...
pip3 install pygame
Collecting pygame
Using cached pygame-2.1.2.tar.gz (10.1 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [31 lines of output]
WARNING, No "Setup" File Exists, Running "buildconfig/config.py"
Using Darwin configuration...
/bin/sh: sdl2-config: command not found
/bin/sh: sdl2-config: command not found
/bin/sh: sdl2-config: command not found
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/setup.py", line 359, in <module>
buildconfig.config.main(AUTO_CONFIG)
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config.py", line 225, in main
deps = CFG.main(**kwds)
^^^^^^^^^^^^^^^^
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config_darwin.py", line 132, in main
[DependencyProg('SDL', 'SDL_CONFIG', 'sdl2-config', '2.0', ['sdl'])],
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config_unix.py", line 39, in __init__
self.ver = config[0].strip()
~~~~~~^^^
IndexError: list index out of range
---
For help with compilation see:
https://www.pygame.org/wiki/MacCompile
To contribute to pygame development see:
https://www.pygame.org/contribute.html
---
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Just like PortAudio which helps in the installation of pyaudio I want to know which package will help the installation of pygame ??
pyaudio installation also throws same type of error before installation of PortAudio. I install PortAudio which the help of Homebrew by the help of code "brew install portaudio".
I want to know the name of package(like portaudio) which help in the installation of pygame.
Please help....
I tried pip3 install pygame and I was expecting pygame to installed successfully.
Here is the error itself. To install, I use the command "pip install librosa", Python version 3.11.0
Collecting numba\>=0.45.1
Using cached numba-0.56.4.tar.gz (2.4 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─\> \[8 lines of output\]
Traceback (most recent call last):
File "\<string\>", line 2, in \<module\>
File "\<pip-setuptools-caller\>", line 34, in \<module\>
File "C:\\Users\\merge\\AppData\\Local\\Temp\\pip-install-qgu9dc69\\numba_22de5875b2534efba1d1a87fc556500b\\setup.py", line 51, in \<module\>
\_guard_py_ver()
File "C:\\Users\\merge\\AppData\\Local\\Temp\\pip-install-qgu9dc69\\numba_22de5875b2534efba1d1a87fc556500b\\setup.py", line 48, in \_guard_py_ver
raise RuntimeError(msg.format(cur_py, min_py, max_py))
RuntimeError: Cannot install on Python version 3.11.0; only versions \>=3.7,\<3.11 are supported.
\[end of output\]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─\> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
I tried to install not in Pycharm and changed the version of Python, I did not find anything on the Internet about this error, everywhere they suggest installing via "conda". Is there another way?
Ive tried updating pip and installing different packages but nothing seems to work. im not sure if i have to run a command in konsole or alacritty but any help would be appreciated. i use fedora btw
sh-5.1$ pip3 install mysql
Defaulting to user installation because normal site-packages is not writeable
Collecting mysql
Using cached mysql-0.0.3-py3-none-any.whl (1.2 kB)
Collecting mysqlclient
Using cached mysqlclient-2.1.1.tar.gz (88 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [16 lines of output]
/bin/sh: line 1: mysql_config: command not found
/bin/sh: line 1: mariadb_config: command not found
/bin/sh: line 1: mysql_config: command not found
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-install-lol73zmo/mysqlclient_d4096e3cc1ee4a6fbc53886cb9de5a17 /
setup.py", line 15, in <module>
metadata, options = get_config()
File "/tmp/pip-install-lol73zmo/mysqlclient_d4096e3cc1ee4a6fbc53886cb9de5a17
/setup_posix.py", line 70, in get_config
libs = mysql_config("libs")
File "/tmp/pip-install-lol73zmo/mysqlclient_d4096e3cc1ee4a6fbc53886cb9de5a17
/setup_posix.py", line 31, in mysql_config
raise OSError("{} not found".format(_mysql_config_path))
OSError: mysql_config not found
mysql_config --version
mariadb_config --version
mysql_config --libs
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
before installing you have to resolve dependencies .
sudo apt-get install python3-dev libmysqlclient-dev
then inside a virtual environment:
pip3 install mysqlclient
then
pip3 install mysql
it should work