I am trying to install the python package py-pde.
My current python version is 3.9.
I pip install using the command 'pip install py-pde' on the terminal.
However, when I try to install it on my IDE - PyCharm - I get this error:
Collecting py-pde
Using cached py_pde-0.27.1-py3-none-any.whl (269 kB)
Requirement already satisfied: matplotlib>=3.1.0 in /Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11/site-packages (from py-pde) (3.6.2)
Collecting numba>=0.56.0
Using cached numba-0.56.4.tar.gz (2.4 MB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'error'
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [8 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/private/var/folders/sl/b99vml7s45q3zx3wb1fqvq240000gp/T/pip-install-pu5ucxpg/numba_1e4a8190083b40fba0897686608f79d0/setup.py", line 51, in <module>
_guard_py_ver()
File "/private/var/folders/sl/b99vml7s45q3zx3wb1fqvq240000gp/T/pip-install-pu5ucxpg/numba_1e4a8190083b40fba0897686608f79d0/setup.py", line 48, in _guard_py_ver
raise RuntimeError(msg.format(cur_py, min_py, max_py))
RuntimeError: Cannot install on Python version 3.11.0; only versions >=3.7,<3.11 are supported.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Any ideas what's wrong here?
Specifically, it says can't install on Python 3.11, even though I checked my python version using pip --version to be 3.9.
Not sure what's wrong. Help appreciated.
Should be as simple as alt+ctrl+s to go to settings.
Then navigate to Project: "Your project" >> Python Interpreter. Then just browse to the interpreter you want to use instead of 3.11.
Edit: Here's a link to JetBrains (PyCharm parent company) documentation that covers changing your interpreter.
Related
Installing wxpython with pip gives the error ModuleNotFoundError: No module named 'attrdict'
Details:
py -3.10-64 -m pip install -U wxpython
Collecting wxpython
Using cached wxPython-4.2.0.tar.gz (71.0 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [8 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\Bernard\AppData\Local\Temp\pip-install-dokcizpt\wxpython_662eefb4314c47eba7b194b4d07a8e18\setup.py", line 27, in <module>
from buildtools.config import Config, msg, opj, runcmd, canGetSOName, getSOName
File "C:\Users\Bernard\AppData\Local\Temp\pip-install-dokcizpt\wxpython_662eefb4314c47eba7b194b4d07a8e18\buildtools\config.py", line 30, in <module>
from attrdict import AttrDict
ModuleNotFoundError: No module named 'attrdict'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
What works
installing other packages works, e.g.
py -3.10-64 -m pip install -U mido
Requirement already satisfied: mido in c:\python311\lib\site-packages (1.2.10)
Version info
Windows 10 22H2
pip 23.0.1 from C:\Python311\Lib\site-packages\pip (python 3.11)
Context
This is used in the fluidpatcher installer, I logged a bug here.
Update 1
Seems to be a known issue reported here: https://github.com/wxWidgets/Phoenix/issues/2296
Tried workaround of manually installing
py -3.10-64 -m pip install -U attrdict3
Which installs.
Then retried the wxpython install
py -3.10-64 -m pip install -U wxpython
Which fails, this time with a different error message
Collecting wxpython
Using cached wxPython-4.2.0.tar.gz (71.0 MB)
Preparing metadata (setup.py) ... done
Requirement already satisfied: pillow in c:\python311\lib\site-packages (from wxpython) (9.4.0)
Requirement already satisfied: six in c:\python311\lib\site-packages (from wxpython) (1.16.0)
Requirement already satisfied: numpy in c:\python311\lib\site-packages (from wxpython) (1.24.2)
Installing collected packages: wxpython
DEPRECATION: wxpython is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
Running setup.py install for wxpython ... error
error: subprocess-exited-with-error
× Running setup.py install for wxpython did not run successfully.
│ exit code: 1
╰─> [49 lines of output]
C:\Python311\Lib\site-packages\setuptools\dist.py:771: UserWarning: Usage of dash-separated 'license-file' will not be supported in future versions. Please use the underscore name 'license_file' instead
warnings.warn(
C:\Python311\Lib\site-packages\setuptools\config\setupcfg.py:508: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead.
warnings.warn(msg, warning_class)
C:\Python311\Lib\site-packages\setuptools\dist.py:317: DistDeprecationWarning: use_2to3 is ignored.
warnings.warn(f"{attr} is ignored.", DistDeprecationWarning)
running install
C:\Python311\Lib\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
Will build using: "C:\Python311\python.exe"
3.11.0 (main, Oct 24 2022, 18:26:48) [MSC v.1933 64 bit (AMD64)]
Python's architecture is 64bit
cfg.VERSION: 4.2.0
Running command: build
Running command: build_wx
Command '"C:\Python311\python.exe" -c "import os, sys, setuptools.msvc; setuptools.msvc.isfile = lambda path: path is not None and os.path.isfile(path); ei = setuptools.msvc.EnvironmentInfo('x64', vc_min_ver=14.0); env = ei.return_env(); env['vc_ver'] = ei.vc_ver; env['vs_ver'] = ei.vs_ver; env['arch'] = ei.pi.arch; env['py_ver'] = sys.version_info[:2]; print(env)"' failed with exit code 1.
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 1120, in __init__
self.si = SystemInfo(self.ri, vc_ver)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 596, in __init__
vc_ver or self._find_latest_available_vs_ver())
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 610, in _find_latest_available_vs_ver
raise distutils.errors.DistutilsPlatformError(
distutils.errors.DistutilsPlatformError: No Microsoft Visual C++ version found
Finished command: build_wx (0m1.80s)
Finished command: build (0m1.80s)
WARNING: Building this way assumes that all generated files have been
generated already. If that is not the case then use build.py directly
to generate the source and perform the build stage. You can use
--skip-build with the bdist_* or install commands to avoid this
message and the wxWidgets and Phoenix build steps in the future.
"C:\Python311\python.exe" -u build.py build
Command '"C:\Python311\python.exe" -u build.py build' failed with exit code 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> wxpython
This question already has answers here:
Python pygame not installing
(3 answers)
How do I install pip on Windows?
(40 answers)
Closed last month.
This is what happens everytime I run this code "pip3 install pygame"...
pip3 install pygame
Collecting pygame
Using cached pygame-2.1.2.tar.gz (10.1 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [31 lines of output]
WARNING, No "Setup" File Exists, Running "buildconfig/config.py"
Using Darwin configuration...
/bin/sh: sdl2-config: command not found
/bin/sh: sdl2-config: command not found
/bin/sh: sdl2-config: command not found
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/setup.py", line 359, in <module>
buildconfig.config.main(AUTO_CONFIG)
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config.py", line 225, in main
deps = CFG.main(**kwds)
^^^^^^^^^^^^^^^^
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config_darwin.py", line 132, in main
[DependencyProg('SDL', 'SDL_CONFIG', 'sdl2-config', '2.0', ['sdl'])],
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config_unix.py", line 39, in __init__
self.ver = config[0].strip()
~~~~~~^^^
IndexError: list index out of range
---
For help with compilation see:
https://www.pygame.org/wiki/MacCompile
To contribute to pygame development see:
https://www.pygame.org/contribute.html
---
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Just like PortAudio which helps in the installation of pyaudio I want to know which package will help the installation of pygame ??
pyaudio installation also throws same type of error before installation of PortAudio. I install PortAudio which the help of Homebrew by the help of code "brew install portaudio".
I want to know the name of package(like portaudio) which help in the installation of pygame.
Please help....
I tried pip3 install pygame and I was expecting pygame to installed successfully.
Here is the error itself. To install, I use the command "pip install librosa", Python version 3.11.0
Collecting numba\>=0.45.1
Using cached numba-0.56.4.tar.gz (2.4 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─\> \[8 lines of output\]
Traceback (most recent call last):
File "\<string\>", line 2, in \<module\>
File "\<pip-setuptools-caller\>", line 34, in \<module\>
File "C:\\Users\\merge\\AppData\\Local\\Temp\\pip-install-qgu9dc69\\numba_22de5875b2534efba1d1a87fc556500b\\setup.py", line 51, in \<module\>
\_guard_py_ver()
File "C:\\Users\\merge\\AppData\\Local\\Temp\\pip-install-qgu9dc69\\numba_22de5875b2534efba1d1a87fc556500b\\setup.py", line 48, in \_guard_py_ver
raise RuntimeError(msg.format(cur_py, min_py, max_py))
RuntimeError: Cannot install on Python version 3.11.0; only versions \>=3.7,\<3.11 are supported.
\[end of output\]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─\> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
I tried to install not in Pycharm and changed the version of Python, I did not find anything on the Internet about this error, everywhere they suggest installing via "conda". Is there another way?
I was trying to install conda using pip in Command Prompt, I search Everywhere related to this error but I found Nothing that can help me with the problem.
pip install conda
but I got this error:
Collecting conda
Using cached conda-4.3.16.tar.gz (299 kB)
Preparing metadata (setup.py) ... done
Requirement already satisfied: pycosat>=0.6.1 in c:\users\asus\appdata\local\programs\python\python37\lib\site-packages
(from conda) (0.6.3)
Requirement already satisfied: requests>=2.12.4 in c:\users\asus\appdata\local\programs\python\python37\lib\site-package
s (from conda) (2.26.0)
Collecting ruamel.yaml>=0.11.14
Using cached ruamel.yaml-0.17.21-py3-none-any.whl (109 kB)
Collecting conda
Using cached conda-4.3.13.tar.gz (370 kB)
Preparing metadata (setup.py) ... done
Using cached conda-4.2.7.tar.gz (235 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 36, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\ASUS\AppData\Local\Temp\pip-install-89w5h0p1\conda_ae1fc222c1a04f2ca50dbd3c45396cdf\setup.py", line 32, in <module>
from conda._vendor.auxlib import packaging # NOQA
ModuleNotFoundError: No module named 'auxlib'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
WARNING: There was an error checking the latest version of pip.
Please help me to find a solution for this error.
I found a solution to this problem.
the problem in line
ModuleNotFoundError: No module named 'auxlib'
so I just install auxlib by using
pip install auxlib
and then my problem was resolved.
pip is not the correct way to install conda
See the pypi page
WARNING: Using pip install conda or easy_install conda will not give you conda as a standalone application. Currently supported install methods include the Anaconda installer and the miniconda installer.
Im trying to install tensorflow, using pip install tensorflow. I can install other packages but tensorflow is just not working. This is the error i get:
C:\Users\sebas>python -m pip install tensorflow
Collecting tensorflow
Using cached tensorflow-2.8.0-cp37-cp37m-win_amd64.whl (437.9 MB)
Collecting h5py>=2.9.0
Using cached h5py-3.6.0-cp37-cp37m-win_amd64.whl (2.8 MB)
Collecting tensorboard<2.9,>=2.8
Using cached tensorboard-2.8.0-py3-none-any.whl (5.8 MB)
Collecting termcolor>=1.1.0
Using cached termcolor-1.1.0.tar.gz (3.9 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string", line 36, in <module>
File "pip-setuptools-caller>", line 34, in <module>
File "C:\Users\sebas\AppData\Local\Temp\pip-install-vmfvacm3 \termcolor_be9b831904ce413daecad52b36f017aa\setup.py", line 35, in <module>
from termcolor import VERSION
ModuleNotFoundError: No module named 'termcolor'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details. \
For people which will have similiar problem (on Windows)
Main problem is termcolor.
It seems it tries to import VERSION from new version (before instalation) but it behaves like it would load older versions which doesn't have VERSION.
You may download termcolor as file .whl from
Unofficial Windows Binaries for Python Extension Packages
and try to install
pip install termcolor‑1.1.0‑py2.py3‑none‑any.whl
If termcolor‑1.1.0‑py2.py3‑none‑any.whl can no longer be found on Unofficial Windows Binaries for Python Extension Packages you may find it here termcolor-whl · PyPI