When trying to install pyo using pip I get error
$ pip install pyo
Collecting pyo
Using cached pyo-1.0.4.tar.gz (6.1 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\VA\AppData\Local\Temp\pip-install-06kfbyzb\pyo_9bd28f6f7eba4c5aa2896ae564b089f6\setup.py", line 293, in <module>
for f in os.listdir(data_files_common_path)
FileNotFoundError: [WinError 3] The system cannot find the path specified: 'win64dlls\\win64_pyo_data_files_common'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Then I tried
$ pip install pyo --use-deprecated=backtrack-on-build-failures
DEPRECATION: Backtracking on build failures can mask issues related to how a package generates metadata or builds a wheel. This flag will be removed in pip 22.2. A possible replacement is avoiding known-bad versions by explicitly telling pip to ignore them (either directly as requirements, or via a constraints file). Discussion can be found at https://github.com/pypa/pip/issues/10655
Collecting pyo
Using cached pyo-1.0.4.tar.gz (6.1 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\VA\AppData\Local\Temp\pip-install-_t68yako\pyo_d26c3df31ce44e44babd1e5def6de075\setup.py", line 293, in <module>
for f in os.listdir(data_files_common_path)
FileNotFoundError: [WinError 3] The system cannot find the path specified: 'win64dlls\\win64_pyo_data_files_common'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
WARNING: Discarding https://files.pythonhosted.org/packages/7a/4a/a681a4c1c6db790b39f24c3384debedd583db48bea47362640ebcab1f3a6/pyo-1.0.4.tar.gz#sha256=34937eba641ed6b1c8ede1c35f30ad5e08493ec1f09352398790910bfd19d445 (from https://pypi.org/simple/pyo/) (requires-python:>=3.6, <4) due to build failure: metadata generation failed
Using cached pyo-1.0.3.tar.gz (5.2 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\VA\AppData\Local\Temp\pip-install-_t68yako\pyo_3f80885b827046bbb8de3e7c16e16c7b\setup.py", line 215, in <module>
[os.path.join(data_files_common_path, f) for f in os.listdir(data_files_common_path) if f.endswith(".dll")])]
FileNotFoundError: [WinError 3] The system cannot find the path specified: 'win64dlls\\win64_pyo_data_files_common'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
WARNING: Discarding https://files.pythonhosted.org/packages/60/ea/e717ec9cef74dc4a26000b29b1cf8703e2871d9edaae189dc515d8e74910/pyo-1.0.3.tar.gz#sha256=f0d187a78e3ab9f10275853a22b6a08094aeed4e0c2adee8697734373aa8dd1f (from https://pypi.org/simple/pyo/) (requires-python:>=3.6, <4) due to build failure: metadata generation failed
Using cached pyo-1.0.2.tar.gz (5.2 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\VA\AppData\Local\Temp\pip-install-_t68yako\pyo_7636aa31397442f693130603d4cb92d8\setup.py", line 215, in <module>
[os.path.join(data_files_common_path, f) for f in os.listdir(data_files_common_path) if f.endswith(".dll")])]
FileNotFoundError: [WinError 3] The system cannot find the path specified: 'win64dlls\\win64_pyo_data_files_common'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
WARNING: Discarding https://files.pythonhosted.org/packages/4c/48/2b5ea0d2e52edbb3d440fbbf7992f52c9727b2c4117f11b6348abf51706b/pyo-1.0.2.tar.gz#sha256=cb716d2c38a02f3aafba2cb5a47af67d78433580f6536c57fd0883283d3bf64a (from https://pypi.org/simple/pyo/) (requires-python:>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, <4) due to build failure: metadata generation failed
Using cached pyo-1.0.1.tar.gz (5.2 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\VA\AppData\Local\Temp\pip-install-_t68yako\pyo_9550d20742e24085af8ace9202cb7913\setup.py", line 212, in <module>
[os.path.join(data_files_common_path, f) for f in os.listdir(data_files_common_path) if f.endswith(".dll")])]
FileNotFoundError: [WinError 3] The system cannot find the path specified: 'win64dlls\\win64_pyo_data_files_common'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
WARNING: Discarding https://files.pythonhosted.org/packages/9c/f2/87f07599a2f107f02a9f7cf11599c5eecf37662356296e1236c17ec997f4/pyo-1.0.1.tar.gz#sha256=e85a3e9e4e17769c4178c907e6b8f01bc455fe0fa348b0ce64d5698ec7e82202 (from https://pypi.org/simple/pyo/) (requires-python:>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, <4) due to build failure: metadata generation failed
Using cached pyo-1.0.0.tar.gz (5.1 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\VA\AppData\Local\Temp\pip-install-_t68yako\pyo_712915a0221348b59415409f622bde9f\setup.py", line 211, in <module>
[os.path.join(data_files_common_path, f) for f in os.listdir(data_files_common_path) if f.endswith(".dll")])]
FileNotFoundError: [WinError 3] The system cannot find the path specified: 'win64dlls\\win64_pyo_data_files_common'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
WARNING: Discarding https://files.pythonhosted.org/packages/67/0f/2c3f9fb88effc62571c209525b5e84d1ec0b68611c916daa96ae8c84f43f/pyo-1.0.0.tar.gz#sha256=4ad45d32ae6ef5865762594223bddf0d6efa7e45657b899b16cda33ce328ebfd (from https://pypi.org/simple/pyo/) (requires-python:>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, <4) due to build failure: metadata generation failed
ERROR: Could not find a version that satisfies the requirement pyo (from versions: 1.0.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4)
ERROR: No matching distribution found for pyo
The python version
$ python --version
Python 3.10.4
Tried to install AJAX SOUND STUDIO pyo
For AJax Sound studio I tried with latest pyo 0.9.1 but still error persists so I tried with pyo 0.8.4.
Still the issue is not solved.
The above terminal output is from Anaconda Promt from Windows. I also tried to install pyo in Ubuntu. In that OS also I am facing issues with installing PYO.
Terminal output for installation in Ubuntu
$ pip install pyo
Terminal output
tried to install pyo using conda but package is not found
$ conda install pyo
Looking at [PyPI]: pyo 1.0.4 - Download files (newest published version at answer time), prebuilt .whls (for Win) are available if all below apply:
Python version: v3.9, v3.8, v3.7, v3.6
Python arch: pc064 (win_amd64)
Also, building from sources (fall back if no prebuilt .whl available), is complex (and doesn't work OOTB - only tried for Win, but I'm 99% sure that it's the same for Nix) as it requires some additional steps (building / using a bunch of dependencies), so the error pops up (if fixed, another will, and so on).
So, stick with supported Python versions until a new PyO version will be released (this one is 1+ year old). Of course building from sources is an option, but it requires deeper knowledge.
Update #0
Built .whls and published them on [GitHub]: CristiFati/Prebuilt-Binaries - (master) Prebuilt-Binaries/PyO/v1.0.4 (win_amd64 for Python: v3.11, v3.10 and win32 for current Python versions). Check [SO]: Installing pygraphviz on Windows 10 64-bit, Python 3.6 (#CristiFati's answer) (Shortcut section at the end) for details regarding custom .whl installation.
I used the following script to (quickly) test them.
code00.py:
#!/usr/bin/env python
import sys
import time
import pyo
def main(*argv):
sample_name = "Sine"
sample_class = getattr(pyo, sample_name, None)
if sample_class is None:
print("Invalid sample: {:s}".format(sample_name))
return -1
secs = 2
out_file = "{:s}.wav".format(sample_name)
srv = pyo.Server().boot()
print("Playing sound ({:s}) for {:.3f} seconds (and saving to '{:s}') ...".format(sample_name, secs, out_file))
srv.start()
srv.recstart(out_file)
sample = sample_class(mul=0.01).out()
print("Sample: {:}".format(sample))
time.sleep(secs)
srv.recstop()
srv.stop()
sfp = pyo.SfPlayer(out_file)
print("SFP: {:}".format(sfp))
if __name__ == "__main__":
print("Python {:s} {:03d}bit on {:s}\n".format(" ".join(elem.strip() for elem in sys.version.split("\n")),
64 if sys.maxsize > 0x100000000 else 32, sys.platform))
rc = main(*sys.argv[1:])
print("\nDone.\n")
sys.exit(rc)
Output:
[cfati#CFATI-5510-0:e:\Work\Dev\StackOverflow\q073508905]> sopr.bat
### Set shorter prompt to better fit when pasted in StackOverflow (or other) pages ###
[prompt]> :: ------- PYTHON 3.10 -------
[prompt]> "e:\Work\Dev\VEnvs\py_pc064_03.10_test0\Scripts\python.exe" -m pip install "e:\Work\Dev\GitHub\CristiFati\Prebuilt-Binaries\pyo\v1.0.4\pyo-1.0.4-cp310-cp310-win_amd64.whl"
Looking in indexes: https://pypi.org/simple, https://pypi.ngc.nvidia.com
Processing e:\work\dev\github\cristifati\prebuilt-binaries\pyo\v1.0.4\pyo-1.0.4-cp310-cp310-win_amd64.whl
Installing collected packages: pyo
Successfully installed pyo-1.0.4
WARNING: You are using pip version 21.3.1; however, version 22.2.2 is available.
You should consider upgrading via the 'e:\Work\Dev\VEnvs\py_pc064_03.10_test0\Scripts\python.exe -m pip install --upgrade pip' command.
[prompt]>
[prompt]> "e:\Work\Dev\VEnvs\py_pc064_03.10_test0\Scripts\python.exe" ./code00.py
WxPython is not found for the current python version.
Pyo will use a minimal GUI toolkit written with Tkinter (if available).
This toolkit has limited functionnalities and is no more
maintained or updated. If you want to use all of pyo's
GUI features, you should install WxPython, available here:
http://www.wxpython.org/
Python 3.10.1 (tags/v3.10.1:2cd268a, Dec 6 2021, 19:10:37) [MSC v.1929 64 bit (AMD64)] 064bit on win32
Pyo warning: Portmidi closed.
Playing sound (Sine) for 2.000 seconds (and saving to 'Sine.wav') ...
Sample: < Instance of Sine class >
SFP: < Instance of SfPlayer class >
Done.
[prompt]>
[prompt]> :: ------- PYTHON 3.11 -------
[prompt]> "e:\Work\Dev\VEnvs\py_pc064_03.11_test0\Scripts\python.exe" -m pip install "e:\Work\Dev\GitHub\CristiFati\Prebuilt-Binaries\pyo\v1.0.4\pyo-1.0.4-cp311-cp311-win_amd64.whl"
Looking in indexes: https://pypi.org/simple, https://pypi.ngc.nvidia.com
Processing e:\work\dev\github\cristifati\prebuilt-binaries\pyo\v1.0.4\pyo-1.0.4-cp311-cp311-win_amd64.whl
Installing collected packages: pyo
Successfully installed pyo-1.0.4
WARNING: You are using pip version 21.3.1; however, version 22.2.2 is available.
You should consider upgrading via the 'e:\Work\Dev\VEnvs\py_pc064_03.11_test0\Scripts\python.exe -m pip install --upgrade pip' command.
[prompt]>
[prompt]> "e:\Work\Dev\VEnvs\py_pc064_03.11_test0\Scripts\python.exe" ./code00.py
WxPython is not found for the current python version.
Pyo will use a minimal GUI toolkit written with Tkinter (if available).
This toolkit has limited functionnalities and is no more
maintained or updated. If you want to use all of pyo's
GUI features, you should install WxPython, available here:
http://www.wxpython.org/
Python 3.11.0rc1 (main, Aug 8 2022, 11:30:54) [MSC v.1932 64 bit (AMD64)] 064bit on win32
Pyo warning: Portmidi closed.
Playing sound (Sine) for 2.000 seconds (and saving to 'Sine.wav') ...
Sample: < Instance of Sine class >
SFP: < Instance of SfPlayer class >
Done.
[prompt]>
[prompt]> :: ------- PYTHON 3.7 (!!! PC032 !!!) -------
[prompt]> "e:\Work\Dev\VEnvs\py_pc032_03.07_test0\Scripts\python.exe" -m pip install "e:\Work\Dev\GitHub\CristiFati\Prebuilt-Binaries\pyo\v1.0.4\pyo-1.0.4-cp37-cp37m-win32.whl"
Looking in indexes: https://pypi.org/simple, https://pypi.ngc.nvidia.com
Processing e:\work\dev\github\cristifati\prebuilt-binaries\pyo\v1.0.4\pyo-1.0.4-cp37-cp37m-win32.whl
Installing collected packages: pyo
Successfully installed pyo-1.0.4
WARNING: You are using pip version 20.3.3; however, version 22.2.2 is available.
You should consider upgrading via the 'e:\Work\Dev\VEnvs\py_pc032_03.07_test0\Scripts\python.exe -m pip install --upgrade pip' command.
[prompt]>
[prompt]> "e:\Work\Dev\VEnvs\py_pc032_03.07_test0\Scripts\python.exe" ./code00.py
WxPython is not found for the current python version.
Pyo will use a minimal GUI toolkit written with Tkinter (if available).
This toolkit has limited functionnalities and is no more
maintained or updated. If you want to use all of pyo's
GUI features, you should install WxPython, available here:
http://www.wxpython.org/
Python 3.7.9 (tags/v3.7.9:13c94747c7, Aug 17 2020, 18:01:55) [MSC v.1900 32 bit (Intel)] 032bit on win32
Pyo warning: Portmidi closed.
Playing sound (Sine) for 2.000 seconds (and saving to 'Sine.wav') ...
Sample: < Instance of Sine class >
SFP: < Instance of SfPlayer class >
Done.
Note: Needless to say that during each run, an annoying high pitch sound (corresponding to default frequency) was playing for 2 seconds.
Related
Installing wxpython with pip gives the error ModuleNotFoundError: No module named 'attrdict'
Details:
py -3.10-64 -m pip install -U wxpython
Collecting wxpython
Using cached wxPython-4.2.0.tar.gz (71.0 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [8 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\Bernard\AppData\Local\Temp\pip-install-dokcizpt\wxpython_662eefb4314c47eba7b194b4d07a8e18\setup.py", line 27, in <module>
from buildtools.config import Config, msg, opj, runcmd, canGetSOName, getSOName
File "C:\Users\Bernard\AppData\Local\Temp\pip-install-dokcizpt\wxpython_662eefb4314c47eba7b194b4d07a8e18\buildtools\config.py", line 30, in <module>
from attrdict import AttrDict
ModuleNotFoundError: No module named 'attrdict'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
What works
installing other packages works, e.g.
py -3.10-64 -m pip install -U mido
Requirement already satisfied: mido in c:\python311\lib\site-packages (1.2.10)
Version info
Windows 10 22H2
pip 23.0.1 from C:\Python311\Lib\site-packages\pip (python 3.11)
Context
This is used in the fluidpatcher installer, I logged a bug here.
Update 1
Seems to be a known issue reported here: https://github.com/wxWidgets/Phoenix/issues/2296
Tried workaround of manually installing
py -3.10-64 -m pip install -U attrdict3
Which installs.
Then retried the wxpython install
py -3.10-64 -m pip install -U wxpython
Which fails, this time with a different error message
Collecting wxpython
Using cached wxPython-4.2.0.tar.gz (71.0 MB)
Preparing metadata (setup.py) ... done
Requirement already satisfied: pillow in c:\python311\lib\site-packages (from wxpython) (9.4.0)
Requirement already satisfied: six in c:\python311\lib\site-packages (from wxpython) (1.16.0)
Requirement already satisfied: numpy in c:\python311\lib\site-packages (from wxpython) (1.24.2)
Installing collected packages: wxpython
DEPRECATION: wxpython is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
Running setup.py install for wxpython ... error
error: subprocess-exited-with-error
× Running setup.py install for wxpython did not run successfully.
│ exit code: 1
╰─> [49 lines of output]
C:\Python311\Lib\site-packages\setuptools\dist.py:771: UserWarning: Usage of dash-separated 'license-file' will not be supported in future versions. Please use the underscore name 'license_file' instead
warnings.warn(
C:\Python311\Lib\site-packages\setuptools\config\setupcfg.py:508: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead.
warnings.warn(msg, warning_class)
C:\Python311\Lib\site-packages\setuptools\dist.py:317: DistDeprecationWarning: use_2to3 is ignored.
warnings.warn(f"{attr} is ignored.", DistDeprecationWarning)
running install
C:\Python311\Lib\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
Will build using: "C:\Python311\python.exe"
3.11.0 (main, Oct 24 2022, 18:26:48) [MSC v.1933 64 bit (AMD64)]
Python's architecture is 64bit
cfg.VERSION: 4.2.0
Running command: build
Running command: build_wx
Command '"C:\Python311\python.exe" -c "import os, sys, setuptools.msvc; setuptools.msvc.isfile = lambda path: path is not None and os.path.isfile(path); ei = setuptools.msvc.EnvironmentInfo('x64', vc_min_ver=14.0); env = ei.return_env(); env['vc_ver'] = ei.vc_ver; env['vs_ver'] = ei.vs_ver; env['arch'] = ei.pi.arch; env['py_ver'] = sys.version_info[:2]; print(env)"' failed with exit code 1.
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 1120, in __init__
self.si = SystemInfo(self.ri, vc_ver)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 596, in __init__
vc_ver or self._find_latest_available_vs_ver())
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Python311\Lib\site-packages\setuptools\msvc.py", line 610, in _find_latest_available_vs_ver
raise distutils.errors.DistutilsPlatformError(
distutils.errors.DistutilsPlatformError: No Microsoft Visual C++ version found
Finished command: build_wx (0m1.80s)
Finished command: build (0m1.80s)
WARNING: Building this way assumes that all generated files have been
generated already. If that is not the case then use build.py directly
to generate the source and perform the build stage. You can use
--skip-build with the bdist_* or install commands to avoid this
message and the wxWidgets and Phoenix build steps in the future.
"C:\Python311\python.exe" -u build.py build
Command '"C:\Python311\python.exe" -u build.py build' failed with exit code 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> wxpython
I am trying to install the python package py-pde.
My current python version is 3.9.
I pip install using the command 'pip install py-pde' on the terminal.
However, when I try to install it on my IDE - PyCharm - I get this error:
Collecting py-pde
Using cached py_pde-0.27.1-py3-none-any.whl (269 kB)
Requirement already satisfied: matplotlib>=3.1.0 in /Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11/site-packages (from py-pde) (3.6.2)
Collecting numba>=0.56.0
Using cached numba-0.56.4.tar.gz (2.4 MB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'error'
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [8 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/private/var/folders/sl/b99vml7s45q3zx3wb1fqvq240000gp/T/pip-install-pu5ucxpg/numba_1e4a8190083b40fba0897686608f79d0/setup.py", line 51, in <module>
_guard_py_ver()
File "/private/var/folders/sl/b99vml7s45q3zx3wb1fqvq240000gp/T/pip-install-pu5ucxpg/numba_1e4a8190083b40fba0897686608f79d0/setup.py", line 48, in _guard_py_ver
raise RuntimeError(msg.format(cur_py, min_py, max_py))
RuntimeError: Cannot install on Python version 3.11.0; only versions >=3.7,<3.11 are supported.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Any ideas what's wrong here?
Specifically, it says can't install on Python 3.11, even though I checked my python version using pip --version to be 3.9.
Not sure what's wrong. Help appreciated.
Should be as simple as alt+ctrl+s to go to settings.
Then navigate to Project: "Your project" >> Python Interpreter. Then just browse to the interpreter you want to use instead of 3.11.
Edit: Here's a link to JetBrains (PyCharm parent company) documentation that covers changing your interpreter.
This question already has answers here:
Python pygame not installing
(3 answers)
How do I install pip on Windows?
(40 answers)
Closed last month.
This is what happens everytime I run this code "pip3 install pygame"...
pip3 install pygame
Collecting pygame
Using cached pygame-2.1.2.tar.gz (10.1 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [31 lines of output]
WARNING, No "Setup" File Exists, Running "buildconfig/config.py"
Using Darwin configuration...
/bin/sh: sdl2-config: command not found
/bin/sh: sdl2-config: command not found
/bin/sh: sdl2-config: command not found
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/setup.py", line 359, in <module>
buildconfig.config.main(AUTO_CONFIG)
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config.py", line 225, in main
deps = CFG.main(**kwds)
^^^^^^^^^^^^^^^^
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config_darwin.py", line 132, in main
[DependencyProg('SDL', 'SDL_CONFIG', 'sdl2-config', '2.0', ['sdl'])],
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/private/var/folders/tw/hbznyqms4x14ns6ypbmp30_h0000gn/T/pip-install-lv1fsdxk/pygame_bcddb2ed3bf34512afd9ccdced0074b3/buildconfig/config_unix.py", line 39, in __init__
self.ver = config[0].strip()
~~~~~~^^^
IndexError: list index out of range
---
For help with compilation see:
https://www.pygame.org/wiki/MacCompile
To contribute to pygame development see:
https://www.pygame.org/contribute.html
---
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Just like PortAudio which helps in the installation of pyaudio I want to know which package will help the installation of pygame ??
pyaudio installation also throws same type of error before installation of PortAudio. I install PortAudio which the help of Homebrew by the help of code "brew install portaudio".
I want to know the name of package(like portaudio) which help in the installation of pygame.
Please help....
I tried pip3 install pygame and I was expecting pygame to installed successfully.
Here is the error itself. To install, I use the command "pip install librosa", Python version 3.11.0
Collecting numba\>=0.45.1
Using cached numba-0.56.4.tar.gz (2.4 MB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─\> \[8 lines of output\]
Traceback (most recent call last):
File "\<string\>", line 2, in \<module\>
File "\<pip-setuptools-caller\>", line 34, in \<module\>
File "C:\\Users\\merge\\AppData\\Local\\Temp\\pip-install-qgu9dc69\\numba_22de5875b2534efba1d1a87fc556500b\\setup.py", line 51, in \<module\>
\_guard_py_ver()
File "C:\\Users\\merge\\AppData\\Local\\Temp\\pip-install-qgu9dc69\\numba_22de5875b2534efba1d1a87fc556500b\\setup.py", line 48, in \_guard_py_ver
raise RuntimeError(msg.format(cur_py, min_py, max_py))
RuntimeError: Cannot install on Python version 3.11.0; only versions \>=3.7,\<3.11 are supported.
\[end of output\]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─\> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
I tried to install not in Pycharm and changed the version of Python, I did not find anything on the Internet about this error, everywhere they suggest installing via "conda". Is there another way?
Im trying to install tensorflow, using pip install tensorflow. I can install other packages but tensorflow is just not working. This is the error i get:
C:\Users\sebas>python -m pip install tensorflow
Collecting tensorflow
Using cached tensorflow-2.8.0-cp37-cp37m-win_amd64.whl (437.9 MB)
Collecting h5py>=2.9.0
Using cached h5py-3.6.0-cp37-cp37m-win_amd64.whl (2.8 MB)
Collecting tensorboard<2.9,>=2.8
Using cached tensorboard-2.8.0-py3-none-any.whl (5.8 MB)
Collecting termcolor>=1.1.0
Using cached termcolor-1.1.0.tar.gz (3.9 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string", line 36, in <module>
File "pip-setuptools-caller>", line 34, in <module>
File "C:\Users\sebas\AppData\Local\Temp\pip-install-vmfvacm3 \termcolor_be9b831904ce413daecad52b36f017aa\setup.py", line 35, in <module>
from termcolor import VERSION
ModuleNotFoundError: No module named 'termcolor'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details. \
For people which will have similiar problem (on Windows)
Main problem is termcolor.
It seems it tries to import VERSION from new version (before instalation) but it behaves like it would load older versions which doesn't have VERSION.
You may download termcolor as file .whl from
Unofficial Windows Binaries for Python Extension Packages
and try to install
pip install termcolor‑1.1.0‑py2.py3‑none‑any.whl
If termcolor‑1.1.0‑py2.py3‑none‑any.whl can no longer be found on Unofficial Windows Binaries for Python Extension Packages you may find it here termcolor-whl · PyPI