I am doing an encryption service that everytime a user goes on the server it changes the key , the problem is that when i run the python file alone in works like this
when it works
but when I am dockerizing it by the below code
FROM python:3
RUN mkdir -p "C:\Users\joel\Desktop\mcast-freshers-week-devops-main\mcast-freshers-week-devops-main\encryption-service"
COPY requirements.txt ./
RUN pip install -r requirements.txt
COPY . .
CMD [ "python", "app.py" ]
The build and run are succesful even the container it is being created , even the output from the python code is shown
enter image description here
but when i go to the server it shows this
enter image description here
I tried everything but I don't know what to do.
I treid changing the code many times but i still cant solve it , I narrowed it down because i tried another python application and it worked.
When you run your command with docker run, you can always expose the internal port on the docker container to match your local host network port, use this command instead for running your docker container
docker run -it --rm -p 8080:8080 --name my-running-app my-python-app
You can then access your server by visiting localhost:8080
Related
I downloaded a python script and a docker image containing commands to install all the dependencies. How can I run the python script using the docker image?
Copy python file in Docker image then execute -
docker run image-name PATH-OF-SCRIPT-IN-IMAGE/script.py
Or you can also build the DockerFile by using the RUN python PATH-OF-SCRIPT-IN-IMAGE/script.py inside DockerFile.
How to copy container to host
docker cp <containerId>:/file/path/within/container /host/path/target
How to copy host to the container
docker cp /host/local/path/file <containerId>:/file/path/in/container/file
Run in interactive mode:
docker run -it image_name python filename.py
or if you want host and port to be specified:
docker run -it -v filename.py:filename.py -p 8888:8888 image_name python filename.py
Answer
First, Copy your python script and other required files to your docker container.
docker cp /path_to_file <containerId>:/path_where_you_want_to_save
Second, open the container cli using docker desktop and run your python script.
The best way, I think, is to make your own image that contains the dependencies and the script.
When you say you've been given an image, I'm guessing that you've been given a Dockerfile, since you talk about it containing commands.
Place the Dockerfile and the script in the same directory. Add the following lines to the bottom of the Dockerfile.
# Existing part of Dockerfile goes here
COPY my-script.py .
CMD ["python", "my-script.py"]
Replace my-script.py with the name of the script.
Then build and run it with these commands
docker build -t my-image .
docker run my-image
Attempt to run ray docker image on M1 results in
$ docker run -p 10001:10001 -p 8265:8265 -p 33963:33963 rayproject/ray:latest
> WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested
I've tried to use DOCKER_DEFAULT_PLATFORM=linux/amd64, but then nothing happens:
$ DOCKER_DEFAULT_PLATFORM=linux/amd64 docker run -p 10001:10001 -p 8265:8265 -p 33963:33963 rayproject/ray:latest
>
$ docker ps
> CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
The latest tag has digest 744f499644cc
The image has /bin/bash defined as the command to run when it starts. When you run it, you don't attach a TTY, so the container exits immediately.
I'm not familiar with the image, so I don't know the way to run it correctly and your port mappings confuse me a bit. But a way to run it is
docker run -it rayproject/ray:latest
That will put you at a prompt inside the container and you can explore the contents.
I have been struggling to add env variables into my container for the past 3 hrs :( I have looked through the docker run docs but haven't managed to get it to work.
I have built my image using docker build -t sellers_json_analysis . which works fine.
I then go to run it with: docker run -d --env-file ./env sellers_json_analysis
As per the docs: $ docker run --env-file ./env.list ubuntu bash but I get the following error:
docker: open ./env: no such file or directory.
The .env file is in my root directory
But when running docker run --help I am unable to find anything about env variables, but it doesn't provide the following:
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
So not sure I am placing things incorrectly. I could add my variables into the dockerfile but I want to keep it as a public repo as it's a project I would like to display.
Your problem is wrong path, either use .env or ./.env, when you use ./env it mean a file named env in current directory
docker run -d --env-file .env sellers_json_analysis
I have made a little python script to create a DB and some tables inside a RethinkDB
But now I'm trying to launch this python script inside my rethink container launched with docker-compose.
This is my docker-compose.yml rethink container config
# Rethink DB
rethink:
image: rethinkdb:latest
container_name: rethink
ports:
- 58080:8080
- 58015:28015
- 59015:29015
I'm trying to execute the script with after launching my container
docker exec -it rethink python src/app/db-install.py
But I get this error
rpc error: code = 2 desc = oci runtime error: exec failed: exec: "python": executable file not found in $PATH
Python is not found in me container. Is this possible to execute a python script inside a given container with docker-compose or with docker exec ?
First find out if you have python executable in the container:
docker exec -it rethink which python
If it exists, Use the absolute path provided by which command in previous step:
docker exec -it rethink /absolute/path/to/python src/app/db-install.py
If not, you can convert your python script to bash script, so you can run it without extra executables and libraries.
Or you can create a dockerfile, use base image, and install python.
dockerfile:
FROM rethinkdb:latest
RUN apt-get update && apt-get install -y python
Docker Compose file:
rethink:
build : .
container_name: rethink
ports:
- 58080:8080
- 58015:28015
- 59015:29015
Docker-compose
Assuming that python is installed, try:
docker-compose run --rm MY_DOCKER_COMPOSE_SERVICE MY_PYTHON_COMMAND
For a start, you might also just go into the shell at first and run a python script from the command prompt.
docker-compose run --rm MY_DOCKER_COMPOSE_SERVICE bash
In your case, MY_DOCKER_COMPOSE_SERVICE is 'rethink', and that is not the container name here, but the name of the service (first line rethink:), and only the service is run with docker-compose run, not the container.
The MY_PYTHON_COMMAND is, in your case of Python2, python src/app/db-install.py, but in Python3 it is python -m src/app/db-install (without the ".py"), or, if you have Python3 and Python2 installed, python3 -m src/app/db-install.
Dockerfile
To be able to run this python command, the Python file needs to be in the container. Therefore, in your Dockerfile that you need to call with build: ., you need to copy your build directory to a directory in the container of your choice
COPY $PROJECT_PATH /tmp
This /tmp will be created in your build directory. If you just write ".", you do not have any subfolder and save it directly in the build directory.
When using /tmp as the subfolder, you might write at the end of your Dockerfile:
WORKDIR /tmp
Docker-compose
Or if you do not change the WORKDIR from the build (".") context to /tmp and you still want to reach /tmp, run your Python file like /tmp/db-install.py.
The rethinkdb image is based on the debian:jessie image :
https://github.com/rethinkdb/rethinkdb-dockerfiles/blob/da98484fc73485fe7780546903d01dcbcd931673/jessie/2.3.5/Dockerfile
The debian:jessie image does not come with python installed.
So you will need to create your own Dockerfile, something like :
FROM rethinkdb:latest
RUN apt-get update && apt-get install -y python
Then change your docker-compose :
# Rethink DB
rethink:
build : .
container_name: rethink
ports:
- 58080:8080
- 58015:28015
- 59015:29015
build : . is the path to your Dockerfile.
My goal is to run a flask webserver from a Docker container. Working on a Windows machine this requires Vagrant for creating a VM. Running vagrant up --provider=docker leads to the following complaint:
INFO interface: error: The container started either never left the "stopped" state or
very quickly reverted to the "stopped" state. This is usually
because the container didn't execute a command that kept it running,
and usually indicates a misconfiguration.
If you meant for this container to not remain running, please
set the Docker provider configuration "remains_running" to "false":
config.vm.provider "docker" do |d|
d.remains_running = false
end
This is my Dockerfile
FROM mrmrcoleman/python_webapp
EXPOSE 5000
# Install Python
RUN apt-get install -y python python-dev python-distribute python-pip
# Add and install Python modules
RUN pip install Flask
#copy the working directory to the container
ADD . /
CMD python run.py
And this is the Vagrantfile
Vagrant.configure("2") do |config|
config.vm.provider "docker" do |d|
d.build_dir = "." #searches for a local dockerfile
end
config.vm.synced_folder ".", "/vagrant", type: "rsync"
rsync__chown = false
end
Because the Vagrantfile and run.py work without trouble independently, I suspect I made a mistake in the Dockerfile. My question is twofold:
Is there something clearly wrong with the Dockerfile or the
Vagrantfile?
Is there a way to have vagrant/docker produce more
specific error messages?
I think the answer I was looking for is using the command
vagrant docker-logs
I broke the Dockerfile because I did not recognize good behaviour as such, because nothing really happens if the app runs as it should. docker-logs confirms that the flask app is listening for requests.
Is there something clearly wrong with the Dockerfile or the Vagrantfile?
Your Dockerfile and Vagrantfiles look good, but I think you need to modify the permissions of run.py to be executable:
...
#copy the working directory to the container
ADD . /
RUN chmod +x run.py
CMD python run.py
Does that work?
Is there a way to have vagrant/docker produce more specific error messages?
Try taking a look at the vagrant debugging page. Another approach I use is to log into the container and try running the script manually.
# log onto the vm running docker
vagrant ssh
# start your container in bash, assuming its already built.
docker run -it my/container /bin/bash
# now from inside your container try to start your app
python run.py
Also, if you want to view your app locally, you'll want to add port forwarding to your Vagrantfile.