Good afternoon! I'm asking for help, I can't figure out python buildozer for a day, I've already prepared everything, and at the final stage, when the "buildozer android debug" command is entered into the terminal, it gives such an error at the end. Can anyone tell me what to do about it and how to fix it?
Here is the error itself:
Traceback (most recent call last):
File "/usr/local/bin/buildozer", line 11, in <module>
load_entry_point('buildozer==0.40.dev0', 'console_scripts', 'buildozer')()
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/scripts/client.py", line 13, in main
Buildozer().run_command(sys.argv[1:])
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/__init__.py", line 1071, in run_command
self.target.run_commands(args)
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/target.py", line 92, in run_commands
func(args)
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/target.py", line 102, in cmd_debug
self.buildozer.prepare_for_build()
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/__init__.py", line 178, in prepare_for_build
self.target.install_platform()
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/targets/android.py", line 666, in install_platform
self._install_android_ndk()
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/targets/android.py", line 459, in _install_android_ndk
cwd=self.buildozer.global_platform_dir)
File "/usr/local/lib/python3.6/dist-packages/buildozer-0.40.dev0-py3.6.egg/buildozer/__init__.py", line 699, in download
urlretrieve(url, filename, report_hook)
File "/usr/lib/python3.6/urllib/request.py", line 1826, in retrieve
block = fp.read(bs)
File "/usr/lib/python3.6/tempfile.py", line 624, in func_wrapper
return func(*args, **kwargs)
ValueError: read of closed file
I tried to find an answer to this question, but so far without success.
Related
I have always been able to launch spyder without any issues. But today I started running into the following error messages. I don't understand why is it complaining no workingdir? How do I resolve this, as I cannot even launch spyder ?
Traceback (most recent call last):
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\Scripts\spyder-script.py", line 10, in <module>
sys.exit(main())
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\start.py", line 253, in main
mainwindow.main(options, args)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\mainwindow.py", line 1956, in main
mainwindow = create_window(MainWindow, app, splash, options, args)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\utils.py", line 289, in create_window
main.setup()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\mainwindow.py", line 771, in setup
PLUGIN_REGISTRY.register_plugin(self, PluginClass,
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\plugin_registration\registry.py", line 342, in register_plugin
instance = self._instantiate_spyder5_plugin(
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\plugin_registration\registry.py", line 193, in _instantiate_spyder5_plugin
plugin_instance.initialize()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\plugins\new_api.py", line 669, in initialize
self.on_initialize()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\plugins\workingdirectory\plugin.py", line 82, in on_initialize
container.set_history(
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\plugins\workingdirectory\container.py", line 323, in set_history
workdir = self._get_init_workdir()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\plugins\workingdirectory\container.py", line 183, in _get_init_workdir
workdir = self.get_conf('startup/fixed_directory')
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\config\mixins.py", line 76, in get_conf
return CONF.get(section, option, default)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\config\manager.py", line 499, in get
value = config.get(section=section, option=option, default=default)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\config\user.py", line 980, in get
return config.get(section=section, option=option, default=default)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\config\user.py", line 511, in get
raise cp.NoSectionError(section)
configparser.NoSectionError: No section: 'workingdir'
When I am trying to run my application I got the following error
Traceback (most recent call last):
File "./app.py", line 32, in <module>
from pushservices.bootstrap import init_messaging_agents
File "/home/airnotifier/airnotifier/pushservices/bootstrap.py", line 2, in <module>
from .apns import *
File "/home/airnotifier/airnotifier/pushservices/apns.py", line 5, in <module>
from util import json_encode
File "/home/airnotifier/airnotifier/util.py", line 37, in <module>
import tornado
ModuleNotFoundError: No module named 'tornado'
I tried to run this command to install tornado
python3 -m pip install tornado
then I got the following message
Requirement already satisfied: tornado in /usr/local/lib/python3.8/dist-packages (6.0.3)
followed by the following error log
--- Logging error ---
Traceback (most recent call last):
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/logging.py", line 177, in emit
self.console.print(renderable, overflow="ignore", crop=False, style=style)
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/console.py", line 1752, in print
extend(render(renderable, render_options))
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/console.py", line 1390, in render
for render_output in iter_render:
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/logging.py", line 134, in __rich_console__
for line in lines:
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/segment.py", line 245, in split_lines
for segment in segments:
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/console.py", line 1368, in render
renderable = rich_cast(renderable)
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/protocol.py", line 36, in rich_cast
renderable = cast_method()
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/self_outdated_check.py", line 130, in __rich__
pip_cmd = get_best_invocation_for_this_pip()
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/entrypoints.py", line 58, in get_best_invocation_for_this_pip
if found_executable and os.path.samefile(
File "/usr/lib/python3.8/genericpath.py", line 101, in samefile
s2 = os.stat(f2)
FileNotFoundError: [Errno 2] No such file or directory: '/usr/bin/pip3.8'
Call stack:
File "/usr/lib/python3.8/runpy.py", line 194, in _run_module_as_main
return _run_code(code, main_globals, None,
File "/usr/lib/python3.8/runpy.py", line 87, in _run_code
exec(code, run_globals)
File "/usr/local/lib/python3.8/dist-packages/pip/__main__.py", line 31, in <module>
sys.exit(_main())
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/main.py", line 70, in main
return command.main(cmd_args)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/base_command.py", line 101, in main
return self._main(args)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/base_command.py", line 223, in _main
self.handle_pip_version_check(options)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/req_command.py", line 148, in handle_pip_version_check
pip_self_version_check(session, options)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/self_outdated_check.py", line 237, in pip_self_version_check
logger.info("[present-rich] %s", upgrade_prompt)
File "/usr/lib/python3.8/logging/__init__.py", line 1446, in info
self._log(INFO, msg, args, **kwargs)
File "/usr/lib/python3.8/logging/__init__.py", line 1589, in _log
self.handle(record)
File "/usr/lib/python3.8/logging/__init__.py", line 1599, in handle
self.callHandlers(record)
File "/usr/lib/python3.8/logging/__init__.py", line 1661, in callHandlers
hdlr.handle(record)
File "/usr/lib/python3.8/logging/__init__.py", line 954, in handle
self.emit(record)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/logging.py", line 179, in emit
self.handleError(record)
Message: '[present-rich] %s'
Arguments: (UpgradePrompt(old='22.1.2', new='22.2.2'),)
can anyone please tell me what should I do and what is the problem ?
Here's a possible scenario that could cause this:
you execute pip install tornado as a user but you run the tornado project as another user.
Sorry for my terrible english, hope you can understand
I am currently trying to figure out how to use netmiko to automate some of my routine work.Such as getting configuration backup, creating vlans etc.I've managed to use it on Aruba and Huawei Switches without problem.But on alcatel switch I'm facing this issue:
Unknown exception: module 'cryptography.utils' has no attribute 'bit_length'
Traceback (most recent call last):
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 2075, in run
self.kex_engine.parse_next(ptype, m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 101, in parse_next
return self._parse_kexdh_gex_reply(m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 281, in _parse_kexdh_gex_reply
self.transport._verify_key(host_key, sig)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 1886, in _verify_key
if not key.verify_ssh_sig(self.H, Message(sig)):
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\dsskey.py", line 148, in verify_ssh_sig
key = dsa.DSAPublicNumbers(
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\primitives\asymmetric\dsa.py", line 212, in public_key
return backend.load_dsa_public_numbers(self)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\backends\openssl\backend.py", line 871, in load_dsa_public_numbers
dsa._check_dsa_parameters(numbers.parameter_numbers)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\tplink\tplink_jetstream.py", line 145, in _override_check_dsa_parameters
if crypto_utils.bit_length(parameters.q) not in [160, 256]:
AttributeError: module 'cryptography.utils' has no attribute 'bit_length'
Traceback (most recent call last):
File "C:\Users\melih.celik\Desktop\New_Backup\Yedek\Coding\Rand stuff\ssh_deneme(toplu).py", line 75, in
config_backup(cihaz_secim,ip_address,username,password)
File "C:\Users\melih.celik\Desktop\New_Backup\Yedek\Coding\Rand stuff\ssh_deneme(toplu).py", line 12, in config_backup
net_connect=ConnectHandler(**switch) #Baglanti kuruldu.
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\ssh_dispatcher.py", line 312, in ConnectHandler
return ConnectionClass(*args, **kwargs)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\base_connection.py", line 346, in init
self._open()
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\base_connection.py", line 351, in _open
self.establish_connection()
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\base_connection.py", line 920, in establish_connection
self.remote_conn_pre.connect(**ssh_connect_params)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py", line 406, in connect
t.start_client(timeout=timeout)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 660, in start_client
raise e
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 2075, in run
self.kex_engine.parse_next(ptype, m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 101, in parse_next
return self._parse_kexdh_gex_reply(m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 281, in _parse_kexdh_gex_reply
self.transport._verify_key(host_key, sig)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 1886, in _verify_key
if not key.verify_ssh_sig(self.H, Message(sig)):
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\dsskey.py", line 148, in verify_ssh_sig
key = dsa.DSAPublicNumbers(
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\primitives\asymmetric\dsa.py", line 212, in public_key
return backend.load_dsa_public_numbers(self)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\backends\openssl\backend.py", line 871, in load_dsa_public_numbers
dsa._check_dsa_parameters(numbers.parameter_numbers)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\tplink\tplink_jetstream.py", line 145, in _override_check_dsa_parameters
if crypto_utils.bit_length(parameters.q) not in [160, 256]:
AttributeError: module 'cryptography.utils' has no attribute 'bit_length'
Thanks for your help in advance.
It looks like tplink_jetstream.py assumes that a (now removed) helper function is available to it. The simplest fix here would be to go into that file and modify the line containing crypto_utils.bit_length(parameters.q) to read parameters.q.bit_length() instead.
I am trying to execute Run_Keyword.robot made with RIDE file which is in directory 'Robot' from python interpreter and getting following error. I am able to run this .py file from cmd without any error and it gives expected results. What can be the reason for this. I am a newbie to Robot Framework. Please help with this.
from robot import run
run('C:\\Users\\uvijayac\\Desktop\\Robot')
The Error I am getting is as follows.
Traceback (most recent call last):
File "C:\Users\uvijayac\Desktop\Robot\rf.py", line 27, in <module>
run_tests()
File "C:\Users\uvijayac\Desktop\Robot\rf.py", line 23, in run_tests
report=report_file)
File "C:\Python27\lib\site-packages\robot\run.py", line 471, in run
return RobotFramework().execute(*datasources, **options)
File "C:\Python27\lib\site-packages\robot\utils\application.py", line 83, in execute
return self._execute(list(arguments), options)
File "C:\Python27\lib\site-packages\robot\utils\application.py", line 89, in _execute
return self._report_error(unicode(err), help=True)
File "C:\Python27\lib\site-packages\robot\utils\application.py", line 110, in _report_error
self._logger.error(message)
File "C:\Python27\lib\site-packages\robot\output\loggerhelper.py", line 59, in error
self.write(msg, 'ERROR')
File "C:\Python27\lib\site-packages\robot\output\loggerhelper.py", line 62, in write
self.message(Message(message, level, html))
File "C:\Python27\lib\site-packages\robot\output\logger.py", line 109, in message
logger.message(msg)
File "C:\Python27\lib\site-packages\robot\output\monitor.py", line 66, in message
self._writer.error(msg.message, msg.level, clear=self._running_test)
File "C:\Python27\lib\site-packages\robot\output\monitor.py", line 142, in error
self._highlight('[ ', level, ' ] ' + message, error=True)
File "C:\Python27\lib\site-packages\robot\output\monitor.py", line 158, in _highlight
self._write(before, newline=False, error=error)
File "C:\Python27\lib\site-packages\robot\output\monitor.py", line 154, in _write
stream.flush()
IOError: [Errno 9] Bad file descriptor
>>>
I upgraded my GAE SDK to Version 1.8.5 and cannot generate a discovery file anymore with endpointscfg.py gen_discovery_doc -o.-f rpc .../main.FlyFlap.APi
I get the errors below.
I tried to delete the file google_appengine/lib/cacerts/urlfetch_cacerts.txt and certs.txt like it is suggested here, but it didn't help. Does someone got same problems?
Traceback (most recent call last):
File "/usr/local/bin/endpointscfg.py", line 196, in <module>
run_file(__file__, globals())
File "/usr/local/bin/endpointscfg.py", line 192, in run_file
execfile(script_path, globals_)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 472, in <module>
sys.exit(main(sys.argv))
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 467, in main
args.callback(args)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 348, in _GenDiscoveryDocCallback
output_path, hostname=hostname)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 188, in GenDiscoveryDoc
service_configs = GenApiConfig(service_class_names, hostname=hostname)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 144, in GenApiConfig
module_name, base_service_class_name = service_class_name.rsplit('.', 1)
ValueError: need more than 1 value to unpack
updated osx and it works again.