I am currently trying to figure out how to use netmiko to automate some of my routine work.Such as getting configuration backup, creating vlans etc.I've managed to use it on Aruba and Huawei Switches without problem.But on alcatel switch I'm facing this issue:
Unknown exception: module 'cryptography.utils' has no attribute 'bit_length'
Traceback (most recent call last):
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 2075, in run
self.kex_engine.parse_next(ptype, m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 101, in parse_next
return self._parse_kexdh_gex_reply(m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 281, in _parse_kexdh_gex_reply
self.transport._verify_key(host_key, sig)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 1886, in _verify_key
if not key.verify_ssh_sig(self.H, Message(sig)):
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\dsskey.py", line 148, in verify_ssh_sig
key = dsa.DSAPublicNumbers(
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\primitives\asymmetric\dsa.py", line 212, in public_key
return backend.load_dsa_public_numbers(self)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\backends\openssl\backend.py", line 871, in load_dsa_public_numbers
dsa._check_dsa_parameters(numbers.parameter_numbers)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\tplink\tplink_jetstream.py", line 145, in _override_check_dsa_parameters
if crypto_utils.bit_length(parameters.q) not in [160, 256]:
AttributeError: module 'cryptography.utils' has no attribute 'bit_length'
Traceback (most recent call last):
File "C:\Users\melih.celik\Desktop\New_Backup\Yedek\Coding\Rand stuff\ssh_deneme(toplu).py", line 75, in
config_backup(cihaz_secim,ip_address,username,password)
File "C:\Users\melih.celik\Desktop\New_Backup\Yedek\Coding\Rand stuff\ssh_deneme(toplu).py", line 12, in config_backup
net_connect=ConnectHandler(**switch) #Baglanti kuruldu.
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\ssh_dispatcher.py", line 312, in ConnectHandler
return ConnectionClass(*args, **kwargs)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\base_connection.py", line 346, in init
self._open()
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\base_connection.py", line 351, in _open
self.establish_connection()
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\base_connection.py", line 920, in establish_connection
self.remote_conn_pre.connect(**ssh_connect_params)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py", line 406, in connect
t.start_client(timeout=timeout)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 660, in start_client
raise e
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 2075, in run
self.kex_engine.parse_next(ptype, m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 101, in parse_next
return self._parse_kexdh_gex_reply(m)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\kex_gex.py", line 281, in _parse_kexdh_gex_reply
self.transport._verify_key(host_key, sig)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\transport.py", line 1886, in _verify_key
if not key.verify_ssh_sig(self.H, Message(sig)):
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\dsskey.py", line 148, in verify_ssh_sig
key = dsa.DSAPublicNumbers(
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\primitives\asymmetric\dsa.py", line 212, in public_key
return backend.load_dsa_public_numbers(self)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\cryptography\hazmat\backends\openssl\backend.py", line 871, in load_dsa_public_numbers
dsa._check_dsa_parameters(numbers.parameter_numbers)
File "C:\Users\melih.celik\AppData\Local\Programs\Python\Python39\lib\site-packages\netmiko\tplink\tplink_jetstream.py", line 145, in _override_check_dsa_parameters
if crypto_utils.bit_length(parameters.q) not in [160, 256]:
AttributeError: module 'cryptography.utils' has no attribute 'bit_length'
Thanks for your help in advance.
It looks like tplink_jetstream.py assumes that a (now removed) helper function is available to it. The simplest fix here would be to go into that file and modify the line containing crypto_utils.bit_length(parameters.q) to read parameters.q.bit_length() instead.
Related
I have always been able to launch spyder without any issues. But today I started running into the following error messages. I don't understand why is it complaining no workingdir? How do I resolve this, as I cannot even launch spyder ?
Traceback (most recent call last):
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\Scripts\spyder-script.py", line 10, in <module>
sys.exit(main())
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\start.py", line 253, in main
mainwindow.main(options, args)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\mainwindow.py", line 1956, in main
mainwindow = create_window(MainWindow, app, splash, options, args)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\utils.py", line 289, in create_window
main.setup()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\app\mainwindow.py", line 771, in setup
PLUGIN_REGISTRY.register_plugin(self, PluginClass,
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\plugin_registration\registry.py", line 342, in register_plugin
instance = self._instantiate_spyder5_plugin(
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\plugin_registration\registry.py", line 193, in _instantiate_spyder5_plugin
plugin_instance.initialize()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\plugins\new_api.py", line 669, in initialize
self.on_initialize()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\plugins\workingdirectory\plugin.py", line 82, in on_initialize
container.set_history(
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\plugins\workingdirectory\container.py", line 323, in set_history
workdir = self._get_init_workdir()
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\plugins\workingdirectory\container.py", line 183, in _get_init_workdir
workdir = self.get_conf('startup/fixed_directory')
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\api\config\mixins.py", line 76, in get_conf
return CONF.get(section, option, default)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\config\manager.py", line 499, in get
value = config.get(section=section, option=option, default=default)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\config\user.py", line 980, in get
return config.get(section=section, option=option, default=default)
File "C:\Users\xxx\AppData\Local\miniconda\envs\py3_10\lib\site-packages\spyder\config\user.py", line 511, in get
raise cp.NoSectionError(section)
configparser.NoSectionError: No section: 'workingdir'
When I am trying to run my application I got the following error
Traceback (most recent call last):
File "./app.py", line 32, in <module>
from pushservices.bootstrap import init_messaging_agents
File "/home/airnotifier/airnotifier/pushservices/bootstrap.py", line 2, in <module>
from .apns import *
File "/home/airnotifier/airnotifier/pushservices/apns.py", line 5, in <module>
from util import json_encode
File "/home/airnotifier/airnotifier/util.py", line 37, in <module>
import tornado
ModuleNotFoundError: No module named 'tornado'
I tried to run this command to install tornado
python3 -m pip install tornado
then I got the following message
Requirement already satisfied: tornado in /usr/local/lib/python3.8/dist-packages (6.0.3)
followed by the following error log
--- Logging error ---
Traceback (most recent call last):
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/logging.py", line 177, in emit
self.console.print(renderable, overflow="ignore", crop=False, style=style)
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/console.py", line 1752, in print
extend(render(renderable, render_options))
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/console.py", line 1390, in render
for render_output in iter_render:
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/logging.py", line 134, in __rich_console__
for line in lines:
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/segment.py", line 245, in split_lines
for segment in segments:
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/console.py", line 1368, in render
renderable = rich_cast(renderable)
File "/usr/local/lib/python3.8/dist-packages/pip/_vendor/rich/protocol.py", line 36, in rich_cast
renderable = cast_method()
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/self_outdated_check.py", line 130, in __rich__
pip_cmd = get_best_invocation_for_this_pip()
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/entrypoints.py", line 58, in get_best_invocation_for_this_pip
if found_executable and os.path.samefile(
File "/usr/lib/python3.8/genericpath.py", line 101, in samefile
s2 = os.stat(f2)
FileNotFoundError: [Errno 2] No such file or directory: '/usr/bin/pip3.8'
Call stack:
File "/usr/lib/python3.8/runpy.py", line 194, in _run_module_as_main
return _run_code(code, main_globals, None,
File "/usr/lib/python3.8/runpy.py", line 87, in _run_code
exec(code, run_globals)
File "/usr/local/lib/python3.8/dist-packages/pip/__main__.py", line 31, in <module>
sys.exit(_main())
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/main.py", line 70, in main
return command.main(cmd_args)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/base_command.py", line 101, in main
return self._main(args)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/base_command.py", line 223, in _main
self.handle_pip_version_check(options)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/cli/req_command.py", line 148, in handle_pip_version_check
pip_self_version_check(session, options)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/self_outdated_check.py", line 237, in pip_self_version_check
logger.info("[present-rich] %s", upgrade_prompt)
File "/usr/lib/python3.8/logging/__init__.py", line 1446, in info
self._log(INFO, msg, args, **kwargs)
File "/usr/lib/python3.8/logging/__init__.py", line 1589, in _log
self.handle(record)
File "/usr/lib/python3.8/logging/__init__.py", line 1599, in handle
self.callHandlers(record)
File "/usr/lib/python3.8/logging/__init__.py", line 1661, in callHandlers
hdlr.handle(record)
File "/usr/lib/python3.8/logging/__init__.py", line 954, in handle
self.emit(record)
File "/usr/local/lib/python3.8/dist-packages/pip/_internal/utils/logging.py", line 179, in emit
self.handleError(record)
Message: '[present-rich] %s'
Arguments: (UpgradePrompt(old='22.1.2', new='22.2.2'),)
can anyone please tell me what should I do and what is the problem ?
Here's a possible scenario that could cause this:
you execute pip install tornado as a user but you run the tornado project as another user.
Sorry for my terrible english, hope you can understand
With the following codes under beam 2.14.0
| "FixedWindow" >> beam.WindowInto(beam.window.FixedWindows(4 * 60),
trigger=beam.trigger.Repeatedly(
beam.trigger.AfterProcessingTime(delay=1 * 60)
),
accumulation_mode=beam.trigger.AccumulationMode.DISCARDING)
The following error comes up
Traceback (most recent call last):
File "beam_home.py", line 287, in <module>
run()
File "beam_home.py", line 282, in run
p.run().wait_until_finish()
File "/usr/local/lib/python2.7/site-packages/apache_beam/pipeline.py", line 406, in run
self._options).run(False)
File "/usr/local/lib/python2.7/site-packages/apache_beam/pipeline.py", line 419, in run
return self.runner.run_pipeline(self, self._options)
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/direct/direct_runner.py", line 128, in run_pipeline
return runner.run_pipeline(pipeline, options)
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/portability/fn_api_runner.py", line 294, in run_pipeline
default_environment=self._default_environment))
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/portability/fn_api_runner.py", line 301, in run_via_runner_api
return self.run_stages(stage_context, stages)
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/portability/fn_api_runner.py", line 383, in run_stages
stage_context.safe_coders)
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/portability/fn_api_runner.py", line 655, in _run_stage
result, splits = bundle_manager.process_bundle(data_input, data_output)
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/portability/fn_api_runner.py", line 1460, in process_bundle
process_bundle_id, transform_id, elements)
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/portability/fn_api_runner.py", line 1356, in _send_input_to_worker
for byte_stream in byte_streams:
File "/usr/local/lib/python2.7/site-packages/apache_beam/runners/portability/fn_api_runner.py", line 186, in __iter__
for wkvs in windowed_key_values(key, windowed_values):
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 966, in process_entire_key
state, windowed_values, output_watermark):
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 1130, in process_elements
self.trigger_fn.on_element(value, window, context)
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 515, in on_element
self.underlying.on_element(element, window, context)
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 373, in on_element
self.early.on_element(element, window, NestedContext(context, 'early'))
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 515, in on_element
self.underlying.on_element(element, window, context)
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 307, in on_element
'', TimeDomain.REAL_TIME, context.get_current_time() + self.delay)
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 759, in get_current_time
return self._outer.get_current_time()
File "/usr/local/lib/python2.7/site-packages/apache_beam/transforms/trigger.py", line 733, in get_current_time
return self._clock.time()
AttributeError: 'NoneType' object has no attribute 'time'
Anything am I missing?
It doesn't look like you are missing anything.
It's apparently a known issue. Please see BEAM-5132.
I think the best workaround is to avoid using AfterProcessingTime which it the root cause. It's annoying but you can imitate its effect in a ParDo class.
I have a computer that has a C and D drive, where PyCharm, Python and the source code are installed on the D drive. I'm using Pipenv with PIPENV_VENV_IN_PROJECT set to enabled so that also ends up in the D drive. Despite all this, when running with code coverage enabled, I get this error:
Destroying test database for alias 'default'...
Traceback (most recent call last):
File "D:\Development\PyCharm\PyCharm 2019.1.1\helpers\coverage_runner\run_coverage.py", line 54, in <module>
main()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\cmdline.py", line 770, in main
status = CoverageScript().command_line(argv)
File "D:\Business\projectx\.venv\lib\site-packages\coverage\cmdline.py", line 489, in command_line
return self.do_run(options, args)
File "D:\Business\projectx\.venv\lib\site-packages\coverage\cmdline.py", line 657, in do_run
self.coverage.save()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\control.py", line 529, in save
data = self.get_data()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\control.py", line 583, in get_data
if self._collector and self._collector.flush_data():
File "D:\Business\projectx\.venv\lib\site-packages\coverage\collector.py", line 425, in flush_data
self.covdata.add_lines(abs_file_dict(self.data))
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 236, in add_lines
self._choose_lines_or_arcs(lines=True)
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 279, in _choose_lines_or_arcs
with self._connect() as con:
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 160, in _connect
self._create_db()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 117, in _create_db
with self._db:
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 525, in __enter__
self.connect()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 510, in connect
filename = os.path.relpath(self.filename)
File "D:\Business\projectx\.venv\lib\ntpath.py", line 562, in relpath
path_drive, start_drive))
ValueError: path is on mount 'C:', start on mount 'D:'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "D:\Development\PyCharm\PyCharm 2019.1.1\helpers\coverage_runner\run_coverage.py", line 58, in <module>
main(["xml", "-o", coverage_file + ".xml", "--ignore-errors"])
File "D:\Business\projectx\.venv\lib\site-packages\coverage\cmdline.py", line 770, in main
status = CoverageScript().command_line(argv)
File "D:\Business\projectx\.venv\lib\site-packages\coverage\cmdline.py", line 511, in command_line
self.coverage.load()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\control.py", line 336, in load
self._data.read()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 409, in read
with self._connect(): # TODO: doesn't look right
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 160, in _connect
self._create_db()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 117, in _create_db
with self._db:
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 525, in __enter__
self.connect()
File "D:\Business\projectx\.venv\lib\site-packages\coverage\sqldata.py", line 510, in connect
filename = os.path.relpath(self.filename)
File "D:\Business\projectx\.venv\lib\ntpath.py", line 562, in relpath
path_drive, start_drive))
ValueError: path is on mount 'C:', start on mount 'D:'
Any ideas why?
I upgraded my GAE SDK to Version 1.8.5 and cannot generate a discovery file anymore with endpointscfg.py gen_discovery_doc -o.-f rpc .../main.FlyFlap.APi
I get the errors below.
I tried to delete the file google_appengine/lib/cacerts/urlfetch_cacerts.txt and certs.txt like it is suggested here, but it didn't help. Does someone got same problems?
Traceback (most recent call last):
File "/usr/local/bin/endpointscfg.py", line 196, in <module>
run_file(__file__, globals())
File "/usr/local/bin/endpointscfg.py", line 192, in run_file
execfile(script_path, globals_)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 472, in <module>
sys.exit(main(sys.argv))
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 467, in main
args.callback(args)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 348, in _GenDiscoveryDocCallback
output_path, hostname=hostname)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 188, in GenDiscoveryDoc
service_configs = GenApiConfig(service_class_names, hostname=hostname)
File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/endpointscfg.py", line 144, in GenApiConfig
module_name, base_service_class_name = service_class_name.rsplit('.', 1)
ValueError: need more than 1 value to unpack
updated osx and it works again.