Related
I have multiple dicts (or sequences of key-value pairs) like this:
d1 = {key1: x1, key2: y1}
d2 = {key1: x2, key2: y2}
How can I efficiently get a result like this, as a new dict?
d = {key1: (x1, x2), key2: (y1, y2)}
See also: How can one make a dictionary with duplicate keys in Python?.
Here's a general solution that will handle an arbitrary amount of dictionaries, with cases when keys are in only some of the dictionaries:
from collections import defaultdict
d1 = {1: 2, 3: 4}
d2 = {1: 6, 3: 7}
dd = defaultdict(list)
for d in (d1, d2): # you can list as many input dicts as you want here
for key, value in d.items():
dd[key].append(value)
print(dd) # result: defaultdict(<type 'list'>, {1: [2, 6], 3: [4, 7]})
assuming all keys are always present in all dicts:
ds = [d1, d2]
d = {}
for k in d1.iterkeys():
d[k] = tuple(d[k] for d in ds)
Note: In Python 3.x use below code:
ds = [d1, d2]
d = {}
for k in d1.keys():
d[k] = tuple(d[k] for d in ds)
and if the dic contain numpy arrays:
ds = [d1, d2]
d = {}
for k in d1.keys():
d[k] = np.concatenate(list(d[k] for d in ds))
This function merges two dicts even if the keys in the two dictionaries are different:
def combine_dict(d1, d2):
return {
k: tuple(d[k] for d in (d1, d2) if k in d)
for k in set(d1.keys()) | set(d2.keys())
}
Example:
d1 = {
'a': 1,
'b': 2,
}
d2` = {
'b': 'boat',
'c': 'car',
}
combine_dict(d1, d2)
# Returns: {
# 'a': (1,),
# 'b': (2, 'boat'),
# 'c': ('car',)
# }
dict1 = {'m': 2, 'n': 4}
dict2 = {'n': 3, 'm': 1}
Making sure that the keys are in the same order:
dict2_sorted = {i:dict2[i] for i in dict1.keys()}
keys = dict1.keys()
values = zip(dict1.values(), dict2_sorted.values())
dictionary = dict(zip(keys, values))
gives:
{'m': (2, 1), 'n': (4, 3)}
If you only have d1 and d2,
from collections import defaultdict
d = defaultdict(list)
for a, b in d1.items() + d2.items():
d[a].append(b)
Here is one approach you can use which would work even if both dictonaries don't have same keys:
d1 = {'a':'test','b':'btest','d':'dreg'}
d2 = {'a':'cool','b':'main','c':'clear'}
d = {}
for key in set(d1.keys() + d2.keys()):
try:
d.setdefault(key,[]).append(d1[key])
except KeyError:
pass
try:
d.setdefault(key,[]).append(d2[key])
except KeyError:
pass
print d
This would generate below input:
{'a': ['test', 'cool'], 'c': ['clear'], 'b': ['btest', 'main'], 'd': ['dreg']}
Using precomputed keys
def merge(dicts):
# First, figure out which keys are present.
keys = set().union(*dicts)
# Build a dict with those keys, using a list comprehension to
# pull the values from the source dicts.
return {
k: [d[k] for d in dicts if k in d]
for k in keys
}
This is essentially Flux's answer, generalized for a list of input dicts.
The set().union trick works by making a set union of the keys in all the source dictionaries. The union method on a set (we start with an empty one) can accept an arbitrary number of arguments, and make a union of each input with the original set; and it can accept other iterables (it does not require other sets for the arguments) - it will iterate over them and look for all unique elements. Since iterating over a dict yields its keys, they can be passed directly to the union method.
In the case where the keys of all inputs are known to be the same, this can be simplified: the keys can be hard-coded (or inferred from one of the inputs), and the if check in the list comprehension becomes unnecessary:
def merge(dicts):
return {
k: [d[k] for d in dicts]
for k in dicts[0].keys()
}
This is analogous to blubb's answer, but using a dict comprehension rather than an explicit loop to build the final result.
We could also try something like Mahdi Ghelichi's answer:
def merge(dicts):
values = zip(*(d.values() for d in ds))
return dict(zip(dicts[0].keys(), values))
This should work in Python 3.5 and below: dicts with identical keys will store them in the same order, during the same run of the program (if you run the program again, you may get a different ordering, but still a consistent one).
In 3.6 and above, dictionaries preserve their insertion order (though they are only guaranteed to do so by the specification in 3.7 and above). Thus, input dicts could have the same keys in a different order, which would cause the first zip to combine the wrong values.
We can work around this by "sorting" the input dicts (re-creating them with keys in a consistent order, like [{k:d[k] for k in dicts[0].keys()} for d in dicts]. (In older versions, this would be extra work with no net effect.) However, this adds complexity, and this double-zip approach really doesn't offer any advantages over the previous one using a dict comprehension.
Building the result explicitly, discovering keys on the fly
As in Eli Bendersky's answer, but as a function:
from collections import defaultdict
def merge(dicts):
result = defaultdict(list)
for d in dicts:
for key, value in d.items():
result[key].append(value)
return result
This will produce a defaultdict, a subclass of dict defined by the standard library. The equivalent code using only built-in dicts might look like:
def merge(dicts):
result = {}
for d in dicts:
for key, value in d.items():
result.setdefault(key, []).append(value)
return result
Using other container types besides lists
The precomputed-key approach will work fine to make tuples; replace the list comprehension [d[k] for d in dicts if k in d] with tuple(d[k] for d in dicts if k in d). This passes a generator expression to the tuple constructor. (There is no "tuple comprehension".)
Since tuples are immutable and don't have an append method, the explicit loop approach should be modified by replacing .append(value) with += (value,). However, this may perform poorly if there is a lot of key duplication, since it must create a new tuple each time. It might be better to produce lists first and then convert the final result with something like {k: tuple(v) for (k, v) in merged.items()}.
Similar modifications can be made to get sets (although there is a set comprehension, using {}), Numpy arrays etc. For example, we can generalize both approaches with a container type like so:
def merge(dicts, value_type=list):
# First, figure out which keys are present.
keys = set().union(*dicts)
# Build a dict with those keys, using a list comprehension to
# pull the values from the source dicts.
return {
k: value_type(d[k] for d in dicts if k in d)
for k in keys
}
and
from collections import defaultdict
def merge(dicts, value_type=list):
# We stick with hard-coded `list` for the first part,
# because even other mutable types will offer different interfaces.
result = defaultdict(list)
for d in dicts:
for key, value in d.items():
result[key].append(value)
# This is redundant for the default case, of course.
return {k:value_type(v) for (k, v) in result}
If the input values are already sequences
Rather than wrapping the values from the source in a new list, often people want to take inputs where the values are all already lists, and concatenate those lists in the output (or concatenate tuples or 1-dimensional Numpy arrays, combine sets, etc.).
This is still a trivial modification. For precomputed keys, use a nested list comprehension, ordered to get a flat result:
def merge(dicts):
keys = set().union(*dicts)
return {
k: [v for d in dicts if k in d for v in d[k]]
# Alternately:
# k: [v for d in dicts for v in d.get(k, [])]
for k in keys
}
One might instead think of using sum to concatenate results from the original list comprehension. Don't do this - it will perform poorly when there are a lot of duplicate keys. The built-in sum isn't optimized for sequences (and will explicitly disallow "summing" strings) and will try to create a new list with each addition internally.
With the explicit loop approach, use .extend instead of .append:
from collections import defaultdict
def merge(dicts):
result = defaultdict(list)
for d in dicts:
for key, value in d.items():
result[key].extend(value)
return result
The extend method of lists accepts any iterable, so this will work with inputs that have tuples for the values - of course, it still uses lists in the output; and of course, those can be converted back as shown previously.
If the inputs have one item each
A common version of this problem involves input dicts that each have a single key-value pair. Alternately, the input might be (key, value) tuples (or lists).
The above approaches will still work, of course. For tuple inputs, converting them to dicts first, like [{k:v} for (k, v) in tuples], allows for using the directly. Alternately, the explicit iteration approach can be modified to accept the tuples directly, like in Victoria Stuart's answer:
from collections import defaultdict
def merge(pairs):
result = defaultdict(list)
for key, value in pairs:
result[key].extend(value)
return result
(The code was simplified because there is no need to iterate over key-value pairs when there is only one of them and it has been provided directly.)
However, for these single-item cases it may work better to sort the values by key and then use itertools.groupby. In this case, it will be easier to work with the tuples. That looks like:
from itertools import groupby
def merge(tuples):
grouped = groupby(tuples, key=lambda t: t[0])
return {k: [kv[1] for kv in ts] for k, ts in grouped}
Here, t is used as a name for one of the tuples from the input. The grouped iterator will provide pairs of a "key" value k (the first element that was common to the tuples being grouped) and an iterator ts over the tuples in that group. Then we extract the values from the key-value pairs kv in the ts, make a list from those, and use that as the value for the k key in the resulting dict.
To merge one-item dicts this way, of course, convert them to tuples first. One simple way to do this, for a list of one-item dicts, is [next(iter(d.items())) for d in dicts].
Assuming there are two dictionaries with exact same keys, below is the most succinct way of doing it (python3 should be used for both the solution).
d1 = {'a': 1, 'b': 2, 'c':3}
d2 = {'a': 5, 'b': 6, 'c':7}
# get keys from one of the dictionary
ks = [k for k in d1.keys()]
print(ks)
['a', 'b', 'c']
# call values from each dictionary on available keys
d_merged = {k: (d1[k], d2[k]) for k in ks}
print(d_merged)
{'a': (1, 5), 'b': (2, 6), 'c': (3, 7)}
# to merge values as list
d_merged = {k: [d1[k], d2[k]] for k in ks}
print(d_merged)
{'a': [1, 5], 'b': [2, 6], 'c': [3, 7]}
If there are two dictionaries with some common keys, but a few different keys, a list of all the keys should be prepared.
d1 = {'a': 1, 'b': 2, 'c':3, 'd': 9}
d2 = {'a': 5, 'b': 6, 'c':7, 'e': 4}
# get keys from one of the dictionary
d1_ks = [k for k in d1.keys()]
d2_ks = [k for k in d2.keys()]
all_ks = set(d1_ks + d2_ks)
print(all_ks)
['a', 'b', 'c', 'd', 'e']
# call values from each dictionary on available keys
d_merged = {k: [d1.get(k), d2.get(k)] for k in all_ks}
print(d_merged)
{'d': [9, None], 'a': [1, 5], 'b': [2, 6], 'c': [3, 7], 'e': [None, 4]}
There is a great library funcy doing what you need in a just one, short line.
from funcy import join_with
from pprint import pprint
d1 = {"key1": "x1", "key2": "y1"}
d2 = {"key1": "x2", "key2": "y2"}
list_of_dicts = [d1, d2]
merged_dict = join_with(tuple, list_of_dicts)
pprint(merged_dict)
Output:
{'key1': ('x1', 'x2'), 'key2': ('y1', 'y2')}
More info here: funcy -> join_with.
def merge(d1, d2, merge):
result = dict(d1)
for k,v in d2.iteritems():
if k in result:
result[k] = merge(result[k], v)
else:
result[k] = v
return result
d1 = {'a': 1, 'b': 2}
d2 = {'a': 1, 'b': 3, 'c': 2}
print merge(d1, d2, lambda x, y:(x,y))
{'a': (1, 1), 'c': 2, 'b': (2, 3)}
If keys are nested:
d1 = { 'key1': { 'nkey1': 'x1' }, 'key2': { 'nkey2': 'y1' } }
d2 = { 'key1': { 'nkey1': 'x2' }, 'key2': { 'nkey2': 'y2' } }
ds = [d1, d2]
d = {}
for k in d1.keys():
for k2 in d1[k].keys():
d.setdefault(k, {})
d[k].setdefault(k2, [])
d[k][k2] = tuple(d[k][k2] for d in ds)
yields:
{'key1': {'nkey1': ('x1', 'x2')}, 'key2': {'nkey2': ('y1', 'y2')}}
Modifying this answer to create a dictionary of tuples (what the OP asked for), instead of a dictionary of lists:
from collections import defaultdict
d1 = {1: 2, 3: 4}
d2 = {1: 6, 3: 7}
dd = defaultdict(tuple)
for d in (d1, d2): # you can list as many input dicts as you want here
for key, value in d.items():
dd[key] += (value,)
print(dd)
The above prints the following:
defaultdict(<class 'tuple'>, {1: (2, 6), 3: (4, 7)})
d1 ={'B': 10, 'C ': 7, 'A': 20}
d2 ={'B': 101, 'Y ': 7, 'X': 8}
d3 ={'A': 201, 'Y ': 77, 'Z': 8}
def CreateNewDictionaryAssemblingAllValues1(d1,d2,d3):
aa = {
k :[d[k] for d in (d1,d2,d3) if k in d ] for k in set(d1.keys() | d2.keys() | d3.keys() )
}
aap = print(aa)
return aap
CreateNewDictionaryAssemblingAllValues1(d1, d2, d3)
"""
Output :
{'X': [8], 'C ': [7], 'Y ': [7, 77], 'Z': [8], 'B': [10, 101], 'A': [20, 201]}
"""
From blubb answer:
You can also directly form the tuple using values from each list
ds = [d1, d2]
d = {}
for k in d1.keys():
d[k] = (d1[k], d2[k])
This might be useful if you had a specific ordering for your tuples
ds = [d1, d2, d3, d4]
d = {}
for k in d1.keys():
d[k] = (d3[k], d1[k], d4[k], d2[k]) #if you wanted tuple in order of d3, d1, d4, d2
Using below method we can merge two dictionaries having same keys.
def update_dict(dict1: dict, dict2: dict) -> dict:
output_dict = {}
for key in dict1.keys():
output_dict.update({key: []})
if type(dict1[key]) != str:
for value in dict1[key]:
output_dict[key].append(value)
else:
output_dict[key].append(dict1[key])
if type(dict2[key]) != str:
for value in dict2[key]:
output_dict[key].append(value)
else:
output_dict[key].append(dict2[key])
return output_dict
Input: d1 = {key1: x1, key2: y1} d2 = {key1: x2, key2: y2}
Output: {'key1': ['x1', 'x2'], 'key2': ['y1', 'y2']}
dicts = [dict1,dict2,dict3]
out = dict(zip(dicts[0].keys(),[[dic[list(dic.keys())[key]] for dic in dicts] for key in range(0,len(dicts[0]))]))
A compact possibility
d1={'a':1,'b':2}
d2={'c':3,'d':4}
context={**d1, **d2}
context
{'b': 2, 'c': 3, 'd': 4, 'a': 1}
I have two dictionaries. Like this:
d1 = {A: 1, B:2, C:3}
d2 = {1: xx, 2:xxx, 3:xxxx}
I wrote a code to compare both:
for k, v in d1.iteritems():
for l, m in d2.iteritems():
if l == v:
print k+'\t'+v+'\t'+m
And print as a table like this:
A 1 xx
B 2 xxx
C 3 xxxx
Suggestions like to create a new_dictionary is accepted.
for k, v in d1.iteritems():
if v in d2:
print('{}\t{}\t{}'.format(k, v, d2[v]))
"Suggestions like to create a new_dictionary is accepted."
print {key : [d1[key], d2[d1[key]]] for key in d1 if d1[key] in d2 }
for k, v in d1.items():
print(k, v, d2[v])
This is how to do it in Python 3.
Try this : simple and easy.
for i in d1:
if d1[i] in d2:
print i,d1[i],d2[d1[i]]
I have multiple dicts (or sequences of key-value pairs) like this:
d1 = {key1: x1, key2: y1}
d2 = {key1: x2, key2: y2}
How can I efficiently get a result like this, as a new dict?
d = {key1: (x1, x2), key2: (y1, y2)}
See also: How can one make a dictionary with duplicate keys in Python?.
Here's a general solution that will handle an arbitrary amount of dictionaries, with cases when keys are in only some of the dictionaries:
from collections import defaultdict
d1 = {1: 2, 3: 4}
d2 = {1: 6, 3: 7}
dd = defaultdict(list)
for d in (d1, d2): # you can list as many input dicts as you want here
for key, value in d.items():
dd[key].append(value)
print(dd) # result: defaultdict(<type 'list'>, {1: [2, 6], 3: [4, 7]})
assuming all keys are always present in all dicts:
ds = [d1, d2]
d = {}
for k in d1.iterkeys():
d[k] = tuple(d[k] for d in ds)
Note: In Python 3.x use below code:
ds = [d1, d2]
d = {}
for k in d1.keys():
d[k] = tuple(d[k] for d in ds)
and if the dic contain numpy arrays:
ds = [d1, d2]
d = {}
for k in d1.keys():
d[k] = np.concatenate(list(d[k] for d in ds))
This function merges two dicts even if the keys in the two dictionaries are different:
def combine_dict(d1, d2):
return {
k: tuple(d[k] for d in (d1, d2) if k in d)
for k in set(d1.keys()) | set(d2.keys())
}
Example:
d1 = {
'a': 1,
'b': 2,
}
d2` = {
'b': 'boat',
'c': 'car',
}
combine_dict(d1, d2)
# Returns: {
# 'a': (1,),
# 'b': (2, 'boat'),
# 'c': ('car',)
# }
dict1 = {'m': 2, 'n': 4}
dict2 = {'n': 3, 'm': 1}
Making sure that the keys are in the same order:
dict2_sorted = {i:dict2[i] for i in dict1.keys()}
keys = dict1.keys()
values = zip(dict1.values(), dict2_sorted.values())
dictionary = dict(zip(keys, values))
gives:
{'m': (2, 1), 'n': (4, 3)}
If you only have d1 and d2,
from collections import defaultdict
d = defaultdict(list)
for a, b in d1.items() + d2.items():
d[a].append(b)
Here is one approach you can use which would work even if both dictonaries don't have same keys:
d1 = {'a':'test','b':'btest','d':'dreg'}
d2 = {'a':'cool','b':'main','c':'clear'}
d = {}
for key in set(d1.keys() + d2.keys()):
try:
d.setdefault(key,[]).append(d1[key])
except KeyError:
pass
try:
d.setdefault(key,[]).append(d2[key])
except KeyError:
pass
print d
This would generate below input:
{'a': ['test', 'cool'], 'c': ['clear'], 'b': ['btest', 'main'], 'd': ['dreg']}
Using precomputed keys
def merge(dicts):
# First, figure out which keys are present.
keys = set().union(*dicts)
# Build a dict with those keys, using a list comprehension to
# pull the values from the source dicts.
return {
k: [d[k] for d in dicts if k in d]
for k in keys
}
This is essentially Flux's answer, generalized for a list of input dicts.
The set().union trick works by making a set union of the keys in all the source dictionaries. The union method on a set (we start with an empty one) can accept an arbitrary number of arguments, and make a union of each input with the original set; and it can accept other iterables (it does not require other sets for the arguments) - it will iterate over them and look for all unique elements. Since iterating over a dict yields its keys, they can be passed directly to the union method.
In the case where the keys of all inputs are known to be the same, this can be simplified: the keys can be hard-coded (or inferred from one of the inputs), and the if check in the list comprehension becomes unnecessary:
def merge(dicts):
return {
k: [d[k] for d in dicts]
for k in dicts[0].keys()
}
This is analogous to blubb's answer, but using a dict comprehension rather than an explicit loop to build the final result.
We could also try something like Mahdi Ghelichi's answer:
def merge(dicts):
values = zip(*(d.values() for d in ds))
return dict(zip(dicts[0].keys(), values))
This should work in Python 3.5 and below: dicts with identical keys will store them in the same order, during the same run of the program (if you run the program again, you may get a different ordering, but still a consistent one).
In 3.6 and above, dictionaries preserve their insertion order (though they are only guaranteed to do so by the specification in 3.7 and above). Thus, input dicts could have the same keys in a different order, which would cause the first zip to combine the wrong values.
We can work around this by "sorting" the input dicts (re-creating them with keys in a consistent order, like [{k:d[k] for k in dicts[0].keys()} for d in dicts]. (In older versions, this would be extra work with no net effect.) However, this adds complexity, and this double-zip approach really doesn't offer any advantages over the previous one using a dict comprehension.
Building the result explicitly, discovering keys on the fly
As in Eli Bendersky's answer, but as a function:
from collections import defaultdict
def merge(dicts):
result = defaultdict(list)
for d in dicts:
for key, value in d.items():
result[key].append(value)
return result
This will produce a defaultdict, a subclass of dict defined by the standard library. The equivalent code using only built-in dicts might look like:
def merge(dicts):
result = {}
for d in dicts:
for key, value in d.items():
result.setdefault(key, []).append(value)
return result
Using other container types besides lists
The precomputed-key approach will work fine to make tuples; replace the list comprehension [d[k] for d in dicts if k in d] with tuple(d[k] for d in dicts if k in d). This passes a generator expression to the tuple constructor. (There is no "tuple comprehension".)
Since tuples are immutable and don't have an append method, the explicit loop approach should be modified by replacing .append(value) with += (value,). However, this may perform poorly if there is a lot of key duplication, since it must create a new tuple each time. It might be better to produce lists first and then convert the final result with something like {k: tuple(v) for (k, v) in merged.items()}.
Similar modifications can be made to get sets (although there is a set comprehension, using {}), Numpy arrays etc. For example, we can generalize both approaches with a container type like so:
def merge(dicts, value_type=list):
# First, figure out which keys are present.
keys = set().union(*dicts)
# Build a dict with those keys, using a list comprehension to
# pull the values from the source dicts.
return {
k: value_type(d[k] for d in dicts if k in d)
for k in keys
}
and
from collections import defaultdict
def merge(dicts, value_type=list):
# We stick with hard-coded `list` for the first part,
# because even other mutable types will offer different interfaces.
result = defaultdict(list)
for d in dicts:
for key, value in d.items():
result[key].append(value)
# This is redundant for the default case, of course.
return {k:value_type(v) for (k, v) in result}
If the input values are already sequences
Rather than wrapping the values from the source in a new list, often people want to take inputs where the values are all already lists, and concatenate those lists in the output (or concatenate tuples or 1-dimensional Numpy arrays, combine sets, etc.).
This is still a trivial modification. For precomputed keys, use a nested list comprehension, ordered to get a flat result:
def merge(dicts):
keys = set().union(*dicts)
return {
k: [v for d in dicts if k in d for v in d[k]]
# Alternately:
# k: [v for d in dicts for v in d.get(k, [])]
for k in keys
}
One might instead think of using sum to concatenate results from the original list comprehension. Don't do this - it will perform poorly when there are a lot of duplicate keys. The built-in sum isn't optimized for sequences (and will explicitly disallow "summing" strings) and will try to create a new list with each addition internally.
With the explicit loop approach, use .extend instead of .append:
from collections import defaultdict
def merge(dicts):
result = defaultdict(list)
for d in dicts:
for key, value in d.items():
result[key].extend(value)
return result
The extend method of lists accepts any iterable, so this will work with inputs that have tuples for the values - of course, it still uses lists in the output; and of course, those can be converted back as shown previously.
If the inputs have one item each
A common version of this problem involves input dicts that each have a single key-value pair. Alternately, the input might be (key, value) tuples (or lists).
The above approaches will still work, of course. For tuple inputs, converting them to dicts first, like [{k:v} for (k, v) in tuples], allows for using the directly. Alternately, the explicit iteration approach can be modified to accept the tuples directly, like in Victoria Stuart's answer:
from collections import defaultdict
def merge(pairs):
result = defaultdict(list)
for key, value in pairs:
result[key].extend(value)
return result
(The code was simplified because there is no need to iterate over key-value pairs when there is only one of them and it has been provided directly.)
However, for these single-item cases it may work better to sort the values by key and then use itertools.groupby. In this case, it will be easier to work with the tuples. That looks like:
from itertools import groupby
def merge(tuples):
grouped = groupby(tuples, key=lambda t: t[0])
return {k: [kv[1] for kv in ts] for k, ts in grouped}
Here, t is used as a name for one of the tuples from the input. The grouped iterator will provide pairs of a "key" value k (the first element that was common to the tuples being grouped) and an iterator ts over the tuples in that group. Then we extract the values from the key-value pairs kv in the ts, make a list from those, and use that as the value for the k key in the resulting dict.
To merge one-item dicts this way, of course, convert them to tuples first. One simple way to do this, for a list of one-item dicts, is [next(iter(d.items())) for d in dicts].
Assuming there are two dictionaries with exact same keys, below is the most succinct way of doing it (python3 should be used for both the solution).
d1 = {'a': 1, 'b': 2, 'c':3}
d2 = {'a': 5, 'b': 6, 'c':7}
# get keys from one of the dictionary
ks = [k for k in d1.keys()]
print(ks)
['a', 'b', 'c']
# call values from each dictionary on available keys
d_merged = {k: (d1[k], d2[k]) for k in ks}
print(d_merged)
{'a': (1, 5), 'b': (2, 6), 'c': (3, 7)}
# to merge values as list
d_merged = {k: [d1[k], d2[k]] for k in ks}
print(d_merged)
{'a': [1, 5], 'b': [2, 6], 'c': [3, 7]}
If there are two dictionaries with some common keys, but a few different keys, a list of all the keys should be prepared.
d1 = {'a': 1, 'b': 2, 'c':3, 'd': 9}
d2 = {'a': 5, 'b': 6, 'c':7, 'e': 4}
# get keys from one of the dictionary
d1_ks = [k for k in d1.keys()]
d2_ks = [k for k in d2.keys()]
all_ks = set(d1_ks + d2_ks)
print(all_ks)
['a', 'b', 'c', 'd', 'e']
# call values from each dictionary on available keys
d_merged = {k: [d1.get(k), d2.get(k)] for k in all_ks}
print(d_merged)
{'d': [9, None], 'a': [1, 5], 'b': [2, 6], 'c': [3, 7], 'e': [None, 4]}
There is a great library funcy doing what you need in a just one, short line.
from funcy import join_with
from pprint import pprint
d1 = {"key1": "x1", "key2": "y1"}
d2 = {"key1": "x2", "key2": "y2"}
list_of_dicts = [d1, d2]
merged_dict = join_with(tuple, list_of_dicts)
pprint(merged_dict)
Output:
{'key1': ('x1', 'x2'), 'key2': ('y1', 'y2')}
More info here: funcy -> join_with.
def merge(d1, d2, merge):
result = dict(d1)
for k,v in d2.iteritems():
if k in result:
result[k] = merge(result[k], v)
else:
result[k] = v
return result
d1 = {'a': 1, 'b': 2}
d2 = {'a': 1, 'b': 3, 'c': 2}
print merge(d1, d2, lambda x, y:(x,y))
{'a': (1, 1), 'c': 2, 'b': (2, 3)}
If keys are nested:
d1 = { 'key1': { 'nkey1': 'x1' }, 'key2': { 'nkey2': 'y1' } }
d2 = { 'key1': { 'nkey1': 'x2' }, 'key2': { 'nkey2': 'y2' } }
ds = [d1, d2]
d = {}
for k in d1.keys():
for k2 in d1[k].keys():
d.setdefault(k, {})
d[k].setdefault(k2, [])
d[k][k2] = tuple(d[k][k2] for d in ds)
yields:
{'key1': {'nkey1': ('x1', 'x2')}, 'key2': {'nkey2': ('y1', 'y2')}}
Modifying this answer to create a dictionary of tuples (what the OP asked for), instead of a dictionary of lists:
from collections import defaultdict
d1 = {1: 2, 3: 4}
d2 = {1: 6, 3: 7}
dd = defaultdict(tuple)
for d in (d1, d2): # you can list as many input dicts as you want here
for key, value in d.items():
dd[key] += (value,)
print(dd)
The above prints the following:
defaultdict(<class 'tuple'>, {1: (2, 6), 3: (4, 7)})
d1 ={'B': 10, 'C ': 7, 'A': 20}
d2 ={'B': 101, 'Y ': 7, 'X': 8}
d3 ={'A': 201, 'Y ': 77, 'Z': 8}
def CreateNewDictionaryAssemblingAllValues1(d1,d2,d3):
aa = {
k :[d[k] for d in (d1,d2,d3) if k in d ] for k in set(d1.keys() | d2.keys() | d3.keys() )
}
aap = print(aa)
return aap
CreateNewDictionaryAssemblingAllValues1(d1, d2, d3)
"""
Output :
{'X': [8], 'C ': [7], 'Y ': [7, 77], 'Z': [8], 'B': [10, 101], 'A': [20, 201]}
"""
From blubb answer:
You can also directly form the tuple using values from each list
ds = [d1, d2]
d = {}
for k in d1.keys():
d[k] = (d1[k], d2[k])
This might be useful if you had a specific ordering for your tuples
ds = [d1, d2, d3, d4]
d = {}
for k in d1.keys():
d[k] = (d3[k], d1[k], d4[k], d2[k]) #if you wanted tuple in order of d3, d1, d4, d2
Using below method we can merge two dictionaries having same keys.
def update_dict(dict1: dict, dict2: dict) -> dict:
output_dict = {}
for key in dict1.keys():
output_dict.update({key: []})
if type(dict1[key]) != str:
for value in dict1[key]:
output_dict[key].append(value)
else:
output_dict[key].append(dict1[key])
if type(dict2[key]) != str:
for value in dict2[key]:
output_dict[key].append(value)
else:
output_dict[key].append(dict2[key])
return output_dict
Input: d1 = {key1: x1, key2: y1} d2 = {key1: x2, key2: y2}
Output: {'key1': ['x1', 'x2'], 'key2': ['y1', 'y2']}
dicts = [dict1,dict2,dict3]
out = dict(zip(dicts[0].keys(),[[dic[list(dic.keys())[key]] for dic in dicts] for key in range(0,len(dicts[0]))]))
A compact possibility
d1={'a':1,'b':2}
d2={'c':3,'d':4}
context={**d1, **d2}
context
{'b': 2, 'c': 3, 'd': 4, 'a': 1}
I have a set and dictionary and a value = 5
v = s = {'a', 'b', 'c'}
d = {'b':5 //<--new value}
If the key 'b' in dictionary d for example is in set s then I want to make that value equal to the new value when I return a dict comprehension or 0 if the key in set s is not in the dictionary d. So this is my code to do it where s['b'] = 5 and my new dictionary is is ...
{'a':0, 'b':5, 'c':0}
I wrote a dict comprehension
{ k:d[k] if k in d else k:0 for k in s}
^
SyntaxError: invalid syntax
Why?! Im so furious it doesnt work. This is how you do if else in python isnt it??
So sorry everyone. For those who visited this page I originally put { k:d[k] if k in v else k:0 for k in v} and s['b'] = 5 was just a representation that the new dictionary i created would have a key 'b' equaling 5, but it isnt correct cus you cant iterate a set like that.
So to reiterate v and s are equal. They just mean vector and set.
The expanded form of what you're trying to achieve is
a = {}
for k in v:
a[k] = d[k] if k in d else 0
where d[k] if k in d else 0 is the Python's version of ternary operator. See? You need to drop k: from the right part of the expression:
{k: d[k] if k in d else 0 for k in v} # ≡ {k: (d[k] if k in d else 0) for k in v}
You can write it concisely like
a = {k: d.get(k, 0) for k in d}
You can't use a ternary if expression for a name:value pair, because a name:value pair isn't a value.
You can use an if expression for the value or key separately, which seems to be exactly what you want here:
{k: (d[k] if k in v else 0) for k in v}
However, this is kind of silly. You're doing for k in v, so every k is in v by definition. Maybe you wanted this:
{k: (d[k] if k in v else 0) for k in d}
In [82]: s = {'a', 'b', 'c'}
In [83]: d = {'b':5 }
In [85]: {key: d.get(key, 0) for key in s}
Out[85]: {'a': 0, 'b': 5, 'c': 0}
This should solve your problem:
>>> dict((k, d.get(k, 0)) for k in s)
{'a': 0, 'c': 0, 'b': 5}
I have a dictionary, and I want to iterate over the keys, test the keys, and then print the keys that pass the test.
For example, my code looks like this at the moment:
x = {4:"a", 1:"b", 0:"c", 9:"d"}
for t in x:
if t > 2:
print t
However, all the output is, is just the key.
How do I get the code to print out the value at the end of the code, instead of the key?
Also, how do I get this in the form of a dictionary, {key : value}?
You could try this: print t, x[t]
Or this:
for key, val in x.items():
if key > 2:
print key, val
If you want to get only the pairs that you're printing into a new dictionary, then you have to put them there:
newdict = {}
for key, val in x.items():
if key > 2:
print key, val
# put all the keys > 2 into the new dict
newdict[key] = val
Of course that solution is printing when it inserts. If you're doing more than just a little script you will get more utility out of breaking functionality out, making sure that any given function does one, and only one, thing:
def filter_dict(x):
newdict = {}
for key, val in x.items():
if key > 2:
# put all the keys > 2 into the new dict
newdict[key] = val
def pretty_print(dct):
for k, v in dct.items():
print k, v
filtered = filter_dict(x)
pretty_print(dct)
This doesn't apply if you're just debugging, of course, and there are ways in which it depends on how large of a program you're writing: if you're doing a simple enough thing then the extra flexibility you get by breaking functionality up is lost because of the extra effort of figuring out exactly what any given thing does. That said: you should generally do it.
Additionally, the most idiomatic way to filter lists on a simple comparison in Python is to use a dict comprehension (new in Python 2.7/3.0):
filtered = {key: val for key, val in x if key > 2}
print [(k,v) for k,v in yourDict.items() if test(k)]
(You could just do k for k,v in... or v for k,v in.... If you only need values, you can use yourDict.values().)
x = {4:"a", 1:"b", 0:"c", 9:"d"}
for t in x:
if t > 2:
print '{}: {}'.format(t, x[t])
Slightly more pythonic:
>>> for key, value in x.iteritems():
... if key > 2:
... print '{}: {}'.format(key, value)
...
4: a
9: d
edit: To just print the value:
>>> for key, value in x.iteritems():
... if key > 2:
... print value
...
a
d
key as well as value:
x = {4:"a", 1:"b", 0:"c", 9:"d"}
for k,v in x.items():
if k>2: print"{%d : %s}"%(k,repr(v))
{4 : 'a'}
{9 : 'd'}
just value:
x = {4:"a", 1:"b", 0:"c", 9:"d"}
for k,v in x.items():
if k>2:print v
a
d
Just the keys:
>>> [k for k in x.iterkeys() if k > 2]
[4, 9]
Just the values:
>>> [v for k,v in x.iteritems() if k > 2]
['a', 'd']
Key-value pairs:
>>> [(k, v) for k,v in x.iteritems() if k > 2]
[(4, 'a'), (9, 'd')]
As a dict:
>>> dict((k,v) for k,v in x.iteritems() if k > 2)
{9: 'd', 4: 'a'}
If you want to create a dictionary with subset of items, you can also use a dictionary comprehension for Python 2.7+:
>>> x = {4:"a", 1:"b", 0:"c", 9:"d"}
>>> y = {k:v for k, v in x.iteritems() if k > 2}
>>> y
{9: 'd', 4: 'a'}
This is only a newer equivalent with only minor syntax differences for what Johnysweb shows in his answer:
>>> y = dict((k, v) for k, v in x.iteritems() if k > 2)
>>> y
{9: 'd', 4: 'a'}
The following list comprehension will print the key and value if key > 2.
Try this:
print [(key, value) for key, value in x.iteritems() if key > 2]
This solution prints the key t and the value in the dictionary x at key t.
x = {4:"a", 1:"b", 0:"c", 9:"d"}
for t in x:
if t > 2:
print t, x[t]
Using lambda function
(lambda x:[(k,v) for k,v in x.iteritems() if k > 2])(x)