Related
Is it possible to forward-declare a function in Python? I want to sort a list using my own cmp function before it is declared.
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
I've put the definition of cmp_configs method after the invocation. It fails with this error:
NameError: name 'cmp_configs' is not defined
Is there any way to "declare" cmp_configs method before it's used?
Sometimes, it is difficult to reorganize code to avoid this problem. For instance, when implementing some forms of recursion:
def spam():
if end_condition():
return end_result()
else:
return eggs()
def eggs():
if end_condition():
return end_result()
else:
return spam()
Where end_condition and end_result have been previously defined.
Is the only solution to reorganize the code and always put definitions before invocations?
Wrap the invocation into a function of its own so that
foo()
def foo():
print "Hi!"
will break, but
def bar():
foo()
def foo():
print "Hi!"
bar()
will work properly.
The general rule in Python is that a function should be defined before its usage, which does not necessarily mean it needs to be higher in the code.
If you kick-start your script through the following:
if __name__=="__main__":
main()
then you probably do not have to worry about things like "forward declaration". You see, the interpreter would go loading up all your functions and then start your main() function. Of course, make sure you have all the imports correct too ;-)
Come to think of it, I've never heard such a thing as "forward declaration" in python... but then again, I might be wrong ;-)
If you don't want to define a function before it's used, and defining it afterwards is impossible, what about defining it in some other module?
Technically you still define it first, but it's clean.
You could create a recursion like the following:
def foo():
bar()
def bar():
foo()
Python's functions are anonymous just like values are anonymous, yet they can be bound to a name.
In the above code, foo() does not call a function with the name foo, it calls a function that happens to be bound to the name foo at the point the call is made. It is possible to redefine foo somewhere else, and bar would then call the new function.
Your problem cannot be solved because it's like asking to get a variable which has not been declared.
I apologize for reviving this thread, but there was a strategy not discussed here which may be applicable.
Using reflection it is possible to do something akin to forward declaration. For instance lets say you have a section of code that looks like this:
# We want to call a function called 'foo', but it hasn't been defined yet.
function_name = 'foo'
# Calling at this point would produce an error
# Here is the definition
def foo():
bar()
# Note that at this point the function is defined
# Time for some reflection...
globals()[function_name]()
So in this way we have determined what function we want to call before it is actually defined, effectively a forward declaration. In python the statement globals()[function_name]() is the same as foo() if function_name = 'foo' for the reasons discussed above, since python must lookup each function before calling it. If one were to use the timeit module to see how these two statements compare, they have the exact same computational cost.
Of course the example here is very useless, but if one were to have a complex structure which needed to execute a function, but must be declared before (or structurally it makes little sense to have it afterwards), one can just store a string and try to call the function later.
If the call to cmp_configs is inside its own function definition, you should be fine. I'll give an example.
def a():
b() # b() hasn't been defined yet, but that's fine because at this point, we're not
# actually calling it. We're just defining what should happen when a() is called.
a() # This call fails, because b() hasn't been defined yet,
# and thus trying to run a() fails.
def b():
print "hi"
a() # This call succeeds because everything has been defined.
In general, putting your code inside functions (such as main()) will resolve your problem; just call main() at the end of the file.
There is no such thing in python like forward declaration. You just have to make sure that your function is declared before it is needed.
Note that the body of a function isn't interpreted until the function is executed.
Consider the following example:
def a():
b() # won't be resolved until a is invoked.
def b():
print "hello"
a() # here b is already defined so this line won't fail.
You can think that a body of a function is just another script that will be interpreted once you call the function.
Sometimes an algorithm is easiest to understand top-down, starting with the overall structure and drilling down into the details.
You can do so without forward declarations:
def main():
make_omelet()
eat()
def make_omelet():
break_eggs()
whisk()
fry()
def break_eggs():
for egg in carton:
break(egg)
# ...
main()
# declare a fake function (prototype) with no body
def foo(): pass
def bar():
# use the prototype however you see fit
print(foo(), "world!")
# define the actual function (overwriting the prototype)
def foo():
return "Hello,"
bar()
Output:
Hello, world!
No, I don't believe there is any way to forward-declare a function in Python.
Imagine you are the Python interpreter. When you get to the line
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
either you know what cmp_configs is or you don't. In order to proceed, you have to
know cmp_configs. It doesn't matter if there is recursion.
You can't forward-declare a function in Python. If you have logic executing before you've defined functions, you've probably got a problem anyways. Put your action in an if __name__ == '__main__' at the end of your script (by executing a function you name "main" if it's non-trivial) and your code will be more modular and you'll be able to use it as a module if you ever need to.
Also, replace that list comprehension with a generator express (i.e., print "\n".join(str(bla) for bla in sorted(mylist, cmp=cmp_configs)))
Also, don't use cmp, which is deprecated. Use key and provide a less-than function.
Import the file itself. Assuming the file is called test.py:
import test
if __name__=='__main__':
test.func()
else:
def func():
print('Func worked')
TL;DR: Python does not need forward declarations. Simply put your function calls inside function def definitions, and you'll be fine.
def foo(count):
print("foo "+str(count))
if(count>0):
bar(count-1)
def bar(count):
print("bar "+str(count))
if(count>0):
foo(count-1)
foo(3)
print("Finished.")
recursive function definitions, perfectly successfully gives:
foo 3
bar 2
foo 1
bar 0
Finished.
However,
bug(13)
def bug(count):
print("bug never runs "+str(count))
print("Does not print this.")
breaks at the top-level invocation of a function that hasn't been defined yet, and gives:
Traceback (most recent call last):
File "./test1.py", line 1, in <module>
bug(13)
NameError: name 'bug' is not defined
Python is an interpreted language, like Lisp. It has no type checking, only run-time function invocations, which succeed if the function name has been bound and fail if it's unbound.
Critically, a function def definition does not execute any of the funcalls inside its lines, it simply declares what the function body is going to consist of. Again, it doesn't even do type checking. So we can do this:
def uncalled():
wild_eyed_undefined_function()
print("I'm not invoked!")
print("Only run this one line.")
and it runs perfectly fine (!), with output
Only run this one line.
The key is the difference between definitions and invocations.
The interpreter executes everything that comes in at the top level, which means it tries to invoke it. If it's not inside a definition.
Your code is running into trouble because you attempted to invoke a function, at the top level in this case, before it was bound.
The solution is to put your non-top-level function invocations inside a function definition, then call that function sometime much later.
The business about "if __ main __" is an idiom based on this principle, but you have to understand why, instead of simply blindly following it.
There are certainly much more advanced topics concerning lambda functions and rebinding function names dynamically, but these are not what the OP was asking for. In addition, they can be solved using these same principles: (1) defs define a function, they do not invoke their lines; (2) you get in trouble when you invoke a function symbol that's unbound.
Python does not support forward declarations, but common workaround for this is use of the the following condition at the end of your script/code:
if __name__ == '__main__': main()
With this it will read entire file first and then evaluate condition and call main() function which will be able to call any forward declared function as it already read the entire file first. This condition leverages special variable __name__ which returns __main__ value whenever we run Python code from current file (when code was imported as a module, then __name__ returns module name).
"just reorganize my code so that I don't have this problem." Correct. Easy to do. Always works.
You can always provide the function prior to it's reference.
"However, there are cases when this is probably unavoidable, for instance when implementing some forms of recursion"
Can't see how that's even remotely possible. Please provide an example of a place where you cannot define the function prior to it's use.
Now wait a minute. When your module reaches the print statement in your example, before cmp_configs has been defined, what exactly is it that you expect it to do?
If your posting of a question using print is really trying to represent something like this:
fn = lambda mylist:"\n".join([str(bla)
for bla in sorted(mylist, cmp = cmp_configs)])
then there is no requirement to define cmp_configs before executing this statement, just define it later in the code and all will be well.
Now if you are trying to reference cmp_configs as a default value of an argument to the lambda, then this is a different story:
fn = lambda mylist,cmp_configs=cmp_configs : \
"\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
Now you need a cmp_configs variable defined before you reach this line.
[EDIT - this next part turns out not to be correct, since the default argument value will get assigned when the function is compiled, and that value will be used even if you change the value of cmp_configs later.]
Fortunately, Python being so type-accommodating as it is, does not care what you define as cmp_configs, so you could just preface with this statement:
cmp_configs = None
And the compiler will be happy. Just be sure to declare the real cmp_configs before you ever invoke fn.
Python technically has support for forward declaration.
if you define a function/class then set the body to pass, it will have an empty entry in the global table.
you can then "redefine" the function/class later on to implement the function/class.
unlike c/c++ forward declaration though, this does not work from outside the scope (i.e. another file) as they have their own "global" namespace
example:
def foo(): pass
foo()
def foo(): print("FOOOOO")
foo()
foo is declared both times
however the first time foo is called it does not do anything as the body is just pass
but the second time foo is called. it executes the new body of print("FOOOOO")
but again. note that this does not fix circular dependancies. this is because files have their own name and have their own definitions of functions
example 2:
class bar: pass
print(bar)
this prints <class '__main__.bar'> but if it was declared in another file it would be <class 'otherfile.foo'>
i know this post is old, but i though that this answer would be useful to anyone who keeps finding this post after the many years it has been posted for
One way is to create a handler function. Define the handler early on, and put the handler below all the methods you need to call.
Then when you invoke the handler method to call your functions, they will always be available.
The handler could take an argument nameOfMethodToCall. Then uses a bunch of if statements to call the right method.
This would solve your issue.
def foo():
print("foo")
#take input
nextAction=input('What would you like to do next?:')
return nextAction
def bar():
print("bar")
nextAction=input('What would you like to do next?:')
return nextAction
def handler(action):
if(action=="foo"):
nextAction = foo()
elif(action=="bar"):
nextAction = bar()
else:
print("You entered invalid input, defaulting to bar")
nextAction = "bar"
return nextAction
nextAction=input('What would you like to do next?:')
while 1:
nextAction = handler(nextAction)
Is it possible to forward-declare a function in Python? I want to sort a list using my own cmp function before it is declared.
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
I've put the definition of cmp_configs method after the invocation. It fails with this error:
NameError: name 'cmp_configs' is not defined
Is there any way to "declare" cmp_configs method before it's used?
Sometimes, it is difficult to reorganize code to avoid this problem. For instance, when implementing some forms of recursion:
def spam():
if end_condition():
return end_result()
else:
return eggs()
def eggs():
if end_condition():
return end_result()
else:
return spam()
Where end_condition and end_result have been previously defined.
Is the only solution to reorganize the code and always put definitions before invocations?
Wrap the invocation into a function of its own so that
foo()
def foo():
print "Hi!"
will break, but
def bar():
foo()
def foo():
print "Hi!"
bar()
will work properly.
The general rule in Python is that a function should be defined before its usage, which does not necessarily mean it needs to be higher in the code.
If you kick-start your script through the following:
if __name__=="__main__":
main()
then you probably do not have to worry about things like "forward declaration". You see, the interpreter would go loading up all your functions and then start your main() function. Of course, make sure you have all the imports correct too ;-)
Come to think of it, I've never heard such a thing as "forward declaration" in python... but then again, I might be wrong ;-)
If you don't want to define a function before it's used, and defining it afterwards is impossible, what about defining it in some other module?
Technically you still define it first, but it's clean.
You could create a recursion like the following:
def foo():
bar()
def bar():
foo()
Python's functions are anonymous just like values are anonymous, yet they can be bound to a name.
In the above code, foo() does not call a function with the name foo, it calls a function that happens to be bound to the name foo at the point the call is made. It is possible to redefine foo somewhere else, and bar would then call the new function.
Your problem cannot be solved because it's like asking to get a variable which has not been declared.
I apologize for reviving this thread, but there was a strategy not discussed here which may be applicable.
Using reflection it is possible to do something akin to forward declaration. For instance lets say you have a section of code that looks like this:
# We want to call a function called 'foo', but it hasn't been defined yet.
function_name = 'foo'
# Calling at this point would produce an error
# Here is the definition
def foo():
bar()
# Note that at this point the function is defined
# Time for some reflection...
globals()[function_name]()
So in this way we have determined what function we want to call before it is actually defined, effectively a forward declaration. In python the statement globals()[function_name]() is the same as foo() if function_name = 'foo' for the reasons discussed above, since python must lookup each function before calling it. If one were to use the timeit module to see how these two statements compare, they have the exact same computational cost.
Of course the example here is very useless, but if one were to have a complex structure which needed to execute a function, but must be declared before (or structurally it makes little sense to have it afterwards), one can just store a string and try to call the function later.
If the call to cmp_configs is inside its own function definition, you should be fine. I'll give an example.
def a():
b() # b() hasn't been defined yet, but that's fine because at this point, we're not
# actually calling it. We're just defining what should happen when a() is called.
a() # This call fails, because b() hasn't been defined yet,
# and thus trying to run a() fails.
def b():
print "hi"
a() # This call succeeds because everything has been defined.
In general, putting your code inside functions (such as main()) will resolve your problem; just call main() at the end of the file.
There is no such thing in python like forward declaration. You just have to make sure that your function is declared before it is needed.
Note that the body of a function isn't interpreted until the function is executed.
Consider the following example:
def a():
b() # won't be resolved until a is invoked.
def b():
print "hello"
a() # here b is already defined so this line won't fail.
You can think that a body of a function is just another script that will be interpreted once you call the function.
Sometimes an algorithm is easiest to understand top-down, starting with the overall structure and drilling down into the details.
You can do so without forward declarations:
def main():
make_omelet()
eat()
def make_omelet():
break_eggs()
whisk()
fry()
def break_eggs():
for egg in carton:
break(egg)
# ...
main()
# declare a fake function (prototype) with no body
def foo(): pass
def bar():
# use the prototype however you see fit
print(foo(), "world!")
# define the actual function (overwriting the prototype)
def foo():
return "Hello,"
bar()
Output:
Hello, world!
No, I don't believe there is any way to forward-declare a function in Python.
Imagine you are the Python interpreter. When you get to the line
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
either you know what cmp_configs is or you don't. In order to proceed, you have to
know cmp_configs. It doesn't matter if there is recursion.
You can't forward-declare a function in Python. If you have logic executing before you've defined functions, you've probably got a problem anyways. Put your action in an if __name__ == '__main__' at the end of your script (by executing a function you name "main" if it's non-trivial) and your code will be more modular and you'll be able to use it as a module if you ever need to.
Also, replace that list comprehension with a generator express (i.e., print "\n".join(str(bla) for bla in sorted(mylist, cmp=cmp_configs)))
Also, don't use cmp, which is deprecated. Use key and provide a less-than function.
Import the file itself. Assuming the file is called test.py:
import test
if __name__=='__main__':
test.func()
else:
def func():
print('Func worked')
TL;DR: Python does not need forward declarations. Simply put your function calls inside function def definitions, and you'll be fine.
def foo(count):
print("foo "+str(count))
if(count>0):
bar(count-1)
def bar(count):
print("bar "+str(count))
if(count>0):
foo(count-1)
foo(3)
print("Finished.")
recursive function definitions, perfectly successfully gives:
foo 3
bar 2
foo 1
bar 0
Finished.
However,
bug(13)
def bug(count):
print("bug never runs "+str(count))
print("Does not print this.")
breaks at the top-level invocation of a function that hasn't been defined yet, and gives:
Traceback (most recent call last):
File "./test1.py", line 1, in <module>
bug(13)
NameError: name 'bug' is not defined
Python is an interpreted language, like Lisp. It has no type checking, only run-time function invocations, which succeed if the function name has been bound and fail if it's unbound.
Critically, a function def definition does not execute any of the funcalls inside its lines, it simply declares what the function body is going to consist of. Again, it doesn't even do type checking. So we can do this:
def uncalled():
wild_eyed_undefined_function()
print("I'm not invoked!")
print("Only run this one line.")
and it runs perfectly fine (!), with output
Only run this one line.
The key is the difference between definitions and invocations.
The interpreter executes everything that comes in at the top level, which means it tries to invoke it. If it's not inside a definition.
Your code is running into trouble because you attempted to invoke a function, at the top level in this case, before it was bound.
The solution is to put your non-top-level function invocations inside a function definition, then call that function sometime much later.
The business about "if __ main __" is an idiom based on this principle, but you have to understand why, instead of simply blindly following it.
There are certainly much more advanced topics concerning lambda functions and rebinding function names dynamically, but these are not what the OP was asking for. In addition, they can be solved using these same principles: (1) defs define a function, they do not invoke their lines; (2) you get in trouble when you invoke a function symbol that's unbound.
Python does not support forward declarations, but common workaround for this is use of the the following condition at the end of your script/code:
if __name__ == '__main__': main()
With this it will read entire file first and then evaluate condition and call main() function which will be able to call any forward declared function as it already read the entire file first. This condition leverages special variable __name__ which returns __main__ value whenever we run Python code from current file (when code was imported as a module, then __name__ returns module name).
"just reorganize my code so that I don't have this problem." Correct. Easy to do. Always works.
You can always provide the function prior to it's reference.
"However, there are cases when this is probably unavoidable, for instance when implementing some forms of recursion"
Can't see how that's even remotely possible. Please provide an example of a place where you cannot define the function prior to it's use.
Now wait a minute. When your module reaches the print statement in your example, before cmp_configs has been defined, what exactly is it that you expect it to do?
If your posting of a question using print is really trying to represent something like this:
fn = lambda mylist:"\n".join([str(bla)
for bla in sorted(mylist, cmp = cmp_configs)])
then there is no requirement to define cmp_configs before executing this statement, just define it later in the code and all will be well.
Now if you are trying to reference cmp_configs as a default value of an argument to the lambda, then this is a different story:
fn = lambda mylist,cmp_configs=cmp_configs : \
"\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
Now you need a cmp_configs variable defined before you reach this line.
[EDIT - this next part turns out not to be correct, since the default argument value will get assigned when the function is compiled, and that value will be used even if you change the value of cmp_configs later.]
Fortunately, Python being so type-accommodating as it is, does not care what you define as cmp_configs, so you could just preface with this statement:
cmp_configs = None
And the compiler will be happy. Just be sure to declare the real cmp_configs before you ever invoke fn.
Python technically has support for forward declaration.
if you define a function/class then set the body to pass, it will have an empty entry in the global table.
you can then "redefine" the function/class later on to implement the function/class.
unlike c/c++ forward declaration though, this does not work from outside the scope (i.e. another file) as they have their own "global" namespace
example:
def foo(): pass
foo()
def foo(): print("FOOOOO")
foo()
foo is declared both times
however the first time foo is called it does not do anything as the body is just pass
but the second time foo is called. it executes the new body of print("FOOOOO")
but again. note that this does not fix circular dependancies. this is because files have their own name and have their own definitions of functions
example 2:
class bar: pass
print(bar)
this prints <class '__main__.bar'> but if it was declared in another file it would be <class 'otherfile.foo'>
i know this post is old, but i though that this answer would be useful to anyone who keeps finding this post after the many years it has been posted for
One way is to create a handler function. Define the handler early on, and put the handler below all the methods you need to call.
Then when you invoke the handler method to call your functions, they will always be available.
The handler could take an argument nameOfMethodToCall. Then uses a bunch of if statements to call the right method.
This would solve your issue.
def foo():
print("foo")
#take input
nextAction=input('What would you like to do next?:')
return nextAction
def bar():
print("bar")
nextAction=input('What would you like to do next?:')
return nextAction
def handler(action):
if(action=="foo"):
nextAction = foo()
elif(action=="bar"):
nextAction = bar()
else:
print("You entered invalid input, defaulting to bar")
nextAction = "bar"
return nextAction
nextAction=input('What would you like to do next?:')
while 1:
nextAction = handler(nextAction)
I have a body of python code that contains inline functions within functions. I'd like to unit test the make_exciting inner function, so I'm trying to figure out how to invoke it directly.
def say_something_exciting(name, phrase):
def make_exciting(phrase):
return phrase + "!"
return "%s says '%s'" % (name, make_exciting(phrase))
Function say_something_exciting is written at the top level of a .py file, and is not inside a class. The py file is in the org.something module. Tried:
Invoking the function directly via org.something.say_something_exciting.make_exciting("Hello") - error: 'function' object has no attribute 'make_exciting'
Inspecting dir(org.something.say_something_exciting) and org.something.say_something_exciting.__dict__ for any paths to traverse, didn't see make_exciting anywhere.
internal_function = org.something.say_something_exciting.__dict__.get('make_exciting'), but internal_function is None.
How can I access (unit test) this inner function? This may suggest what I'm asking isn't possible. I'm generally familiar with unit testing and how to use the unittest module; accessing the function is the problem. If it's not possible, how should I re-write this code to support testing (if other than promote the inner function to a top-level function)?. Thanks!
UPDATE: In Java I often give class methods default/package visibility so they're less visible but still accessible to unit tests, looking for a python equivalent.
I don't think you can.
You'll need to return the inner function, or bind it elsewhere. It gets ugly though. You can bind the declared function to somewhere else, from inside the function:
import testmodule
testmodule.testfunc = make_exciting
Or you can return it, for example when a keyword-argument is given, such as export=True.
$ cat declare_funcs.py
#!/usr/bin/python3
def declared_after():
print("good declared after")
declared_after()
$ python3 declare_funcs.py
good declared after
Change call place:
$ cat declare_funcs.py
#!/usr/bin/python3
declared_after()
def declared_after():
print("good declared after")
$ python3 declare_funcs.py
Traceback (most recent call last):
File "declare_funcs.py", line 4, in <module>
declared_after()
NameError: name 'declared_after' is not defined
Is there way to declare only header of function like it was in C/C++?
For example:
#!/usr/bin/python3
def declared_after() # declaration about defined function
declared_after()
def declared_after():
print("good declared after")
I found this Declare function at end of file in Python
Any way there appear another function in the beginning like wrapper, and this wrapper must be called after declaration of wrapped function, this is not an exit. Is there more elegant true-python way?
You can't forward-declare functions in Python. It doesn't make a lot of sense to do so, because Python is dynamically typed. You could do something silly like this, and what would expect it to do?
foo = 3
foo()
def foo():
print "bar"
Obviously, you are trying to __call__ the int object for 3. It's absolutely silly.
You ask if you can forward-declare like in C/C++. Well, you typically don't run C through an interpreter. However, although Python is compiled to bytecode, the python3 program is an interpreter.
Forward declaration in a compiled language makes sense because you are simply establishing a symbol and its type, and the compiler can run through the code several times to make sense of it. When you use an interpreter, however, you typically can't have that luxury, because you would have to run through the rest of the code to find the meaning of that forward declaration, and run through it again after having done that.
You can, of course, do something like this:
foo = lambda: None
foo()
def foo():
print "bar"
But you instantiated foo nonetheless. Everything has to point to an actual, existing object in Python.
This doesn't apply to def or class statements, though. These create a function or class object, but they don't execute the code inside yet. So, you have time to instantiate things inside them before their code runs.
def foo():
print bar()
# calling foo() won't work yet because you haven't defined bar()
def bar():
return "bar"
# now it will work
The difference was that you simply created function objects with the variable names foo and bar representing them respectively. You can now refer to these objects by those variable names.
With regard to the way that Python is typically interpreted (in CPython) you should make sure that you execute no code in your modules unless they are being run as the main program or unless you want them to do something when being imported (a rare, but valid case). You should do the following:
Put code meant to be executed into function and class definitions.
Unless the code only makes sense to be executed in the main program, put it in another module.
Use if __name__ == "__main__": to create a block of code which will only execute if the program is the main program.
In fact, you should do the third in all of your modules. You can simply write this at the bottom of every file which you don't want to be run as a main program:
if __name__ = "__main__":
pass
This prevents anything from happening if the module is imported.
Python doesn't work that way. The def is executed in sequence, top-to-bottom, with the remainder of the file's contents. You cannot call something before it is defined as a callable (e.g. a function), and even if you had a stand-in callable, it would not contain the code you are looking for.
This, of course, doesn't mean the code isn't compiled before execution begins—in fact, it is. But it is when the def is executed that declared_after is actually assigned the code within the def block, and not before.
Any tricks you pull to sort-of achieve your desired effect must have the effect of delaying the call to declared_after() until after it is defined, for example, by enclosing it in another def block that is itself called later.
One thing you can do is enclose everything in a main function:
def main():
declared_after()
def declared_after():
print("good declared after")
main()
However, the point still stands that the function must be defined prior to calling. This only works because main is called AFTER declared_after is defined.
As zigg wrote, Python files are executed in order they are written from top to bottom, so even if you could “declare” the variable before, the actual function body would only get there after the function was called.
The usual way to solve this is to just have a main function where all your standard execution stuff happens:
def main ():
# do stuff
declared_after();
def declared_after():
pass
main()
You can then also combine this with the __name__ == '__main__' idiom to make the function only execute when you are executing the module directly:
def main ():
# do stuff
declared_after();
def declared_after():
pass
if __name__ == '__main__':
main()
Here is a python module,
#a.py
def bar():
print x #x not defined, apparently will result in an error
def foo():
pass
if __name__ == '__main__':
foo()
The above module can be run ($ python a.py) without any error. Why? Just because bar is not used in __main__?
But bar's definition is executed, isn't it?
Yes, bar's definition is executed, but the definition doesn't contain an error. It is valid Python to define a function that refers to globals that don't yet exist, so long as they exist when the function is called. Consider this:
def bar():
print x
x = 10
if __name__ == '__main__':
bar()
This does not result in an error. And this is only sensible, since even if x exists at the time the function is defined, there is nothing to stop you using del on it later. The point when x needs to be defined is when bar is called (if ever), not when bar is defined.
If Python did work the way you are suggesting, then it would be impossible to define mutually recursive functions without weird hacks like temporarily binding one name to None, then defining both functions.
EDIT: To elaborate on Ignacio's answer to the Alcott's question in the comments, yes syntax errors are caught before the function can be executed, but they're actually caught before it can be defined either.
When Python loads a file, it parses the entire contents into statements and then executes the statements one at a time. A syntax error means it was unable to successfully figure out what statements the file contains, so it can't execute anything. So the error will occur when the file is loaded, which means either when you directly run it with the interpreter, or when you import it.
This pre-processing step is known as "compile time", even though Python is not normally thought of as a compiled language; it is technically compiled to a byte code format, but this is almost entirely uninteresting because the byte code pretty much just directly represents the source code statements.
Python resolves name lookups at runtime.
def bar():
print x
x = 3
bar()
It's true that the definition of bar is executed when you run the script. However, Python can't determine whether a global variable named x actually exists until the whole script is run.
For example, you could do:
if __name__ == '__main__':
if random.random() < 0.5:
x = 5
foo()
The compiler wouldn't be able to determine at compile time whether x is going to exist or not.