Installing specific package version with pip

Installing specific package version with pip - python

I am trying to install version 1.2.2 of MySQL_python, using a fresh virtualenv created with the --no-site-packages option. The current version shown in PyPi is 1.2.3. Is there a way to install the older version? I have tried:
pip install MySQL_python==1.2.2
However, when installed, it still shows MySQL_python-1.2.3-py2.6.egg-info in the site packages. Is this a problem specific to this package, or am I doing something wrong?

TL;DR:
Update as of 2022-12-28:
pip install --force-reinstall -v
For example: pip install --force-reinstall -v "MySQL_python==1.2.2"
What these options mean:
--force-reinstall is an option to reinstall all packages even if they are already up-to-date.
-v is for verbose. You can combine for even more verbosity (i.e. -vv) up to 3 times (e.g. --force-reinstall -vvv).
Thanks to #Peter for highlighting this (and it seems that the context of the question has broadened given the time when the question was first asked!), the documentation for Python discusses a caveat with using -I, in that it can break your installation if it was installed with a different package manager or if if your package is/was a different version.
Original answer:
pip install -Iv (i.e. pip install -Iv MySQL_python==1.2.2)
What these options mean:
-I stands for --ignore-installed which will ignore the installed packages, overwriting them.
-v is for verbose. You can combine for even more verbosity (i.e. -vv) up to 3 times (e.g. -Ivvv).
For more information, see pip install --help
First, I see two issues with what you're trying to do. Since you already have an installed version, you should either uninstall the current existing driver or use pip install -I MySQL_python==1.2.2
However, you'll soon find out that this doesn't work. If you look at pip's installation log, or if you do a pip install -Iv MySQL_python==1.2.2 you'll find that the PyPI URL link does not work for MySQL_python v1.2.2. You can verify this here: http://pypi.python.org/pypi/MySQL-python/1.2.2
The download link 404s and the fallback URL links are re-directing infinitely due to sourceforge.net's recent upgrade and PyPI's stale URL.
So to properly install the driver, you can follow these steps:
pip uninstall MySQL_python
pip install -Iv http://sourceforge.net/projects/mysql-python/files/mysql-python/1.2.2/MySQL-python-1.2.2.tar.gz/download

You can even use a version range with pip install command. Something like this:
pip install 'stevedore>=1.3.0,<1.4.0'
And if the package is already installed and you want to downgrade it add --force-reinstall like this:
pip install 'stevedore>=1.3.0,<1.4.0' --force-reinstall

One way, as suggested in this post, is to mention version in pip as:
pip install -Iv MySQL_python==1.2.2
i.e. Use == and mention the version number to install only that version. -I, --ignore-installed ignores already installed packages.

To install a specific python package version whether it is the first time, an upgrade or a downgrade use:
pip install --force-reinstall MySQL_python==1.2.4
MySQL_python version 1.2.2 is not available so I used a different version. To view all available package versions from an index exclude the version:
pip install MySQL_python==

I believe that if you already have a package it installed, pip will not overwrite it with another version. Use -I to ignore previous versions.

Sometimes, the previously installed version is cached.
~$ pip install pillow==5.2.0
It returns the followings:
Requirement already satisfied: pillow==5.2.0 in /home/ubuntu/anaconda3/lib/python3.6/site-packages (5.2.0)
We can use --no-cache-dir together with -I to overwrite this
~$ pip install --no-cache-dir -I pillow==5.2.0

Since this appeared to be a breaking change introduced in version 10 of pip, I downgraded to a compatible version:
pip install 'pip<10'
This command tells pip to install a version of the module lower than version 10. Do this in a virutalenv so you don't screw up your site installation of Python.

This below command worked for me
Python version - 2.7
package - python-jenkins
command - $ pip install 'python-jenkins>=1.1.1'

I recently ran into an issue when using pip's -I flag that I wanted to document somewhere:
-I will not uninstall the existing package before proceeding; it will just install it on top of the old one. This means that any files that should be deleted between versions will instead be left in place. This can cause weird behavior if those files share names with other installed modules.
For example, let's say there's a package named package. In one of packages files, they use import datetime. Now, in package#2.0.0, this points to the standard library datetime module, but in package#3.0.0, they added a local datetime.py as a replacement for the standard library version (for whatever reason).
Now lets say I run pip install package==3.0.0, but then later realize that I actually wanted version 2.0.0. If I now run pip install -I package==2.0.0, the old datetime.py file will not be removed, so any calls to import datetime will import the wrong module.
In my case, this manifested with strange syntax errors because the newer version of the package added a file that was only compatible with Python 3, and when I downgraded package versions to support Python 2, I continued importing the Python-3-only module.
Based on this, I would argue that uninstalling the old package is always preferable to using -I when updating installed package versions.

There are 2 ways you may install any package with version:-
A). pip install -Iv package-name == version
B). pip install -v package-name == version
For A
Here, if you're using -I option while installing(when you don't know if the package is already installed) (like 'pip install -Iv pyreadline == 2.* 'or something), you would be installing a new separate package with the same existing package having some different version.
For B
At first, you may want to check for no broken requirements.
pip check
2.and then see what's already installed by
pip list
3.if the list of the packages contain any package that you wish to install with specific version then the better option is to uninstall the package of this version first, by
pip uninstall package-name
4.And now you can go ahead to reinstall the same package with a specific version, by
pip install -v package-name==version
e.g. pip install -v pyreadline == 2.*

If you want to update to latest version and you don't know what is the latest version you can type.
pip install MySQL_python --upgrade
This will update the MySQL_python for latest version available, you can use for any other package version.

dependency packaging has had a new release, wherein it has dropped LegacyVersion from its codebase
The quick solution might be pin packaging==21.3

Related

How to recover PIP

I think I uninstalled pip by mistake ^^
I ran something like "pip uninstall pip" in CMD and it completely broke, giving fatal errors.
I uninstalled and reinstalled python, added the correct folders back to PATH, but now it's only working via python -m pip XXXX and not by typing pip XXXX...
If I type pip XXX i get an empty row and CMD gives me back the cursor.
How can I recover? I liked pip XXX better and I am sure that the pip folder is in PATH.

It would help greatly to know what version of each you are using and what OS but for a generic answer...
You could try to install it manually:
Vist:
https://pip.pypa.io/en/stable/installing.html
Download:
get-pip.py
python get-pip.py
Make sure your python version matches your pip version. Otherwise you will always have to be specific on your installs. And for sake of simplicity make sure it works fine with just one version of Python installed. Then if that works you can consider having more.
After installing it, if you upgrade your python version make sure you keep it up to date.
I would try something like:
pip install --upgrade --no-deps --force-reinstall

As os version 21.3.1, you can install pip with the one-liner:
python -m ensurepip --upgrade.
See installation of pip doc for details.

pip stopped working after update to 20.1.1

I always install packages with the command "python -m pip install " in cmd. Today I got the notification that I am using pip and pip 20.1.1 can be installed by typing "python -m pip install --upgrade pip". I did that and now pip fails to install or uninstall programmes. This is the error message I get when trying to install a new package.
ImportError: cannot import name 'webencodings' from 'pip._vendor' (C:\Users\user\AppData\Local\Programs\Python\Python38-32\lib\site-packages\pip\_vendor\__init__.py)
I am a complete beginner and don't want to mess to much with the pip directory, is there an easy solution for my problem?

It looks like this has been happening with pip 20+ when your "system" pip install gets incorrectly upgraded -- it's honestly pretty messed up that the default upgrade command that pip itself tells you to use does this "wrong" upgrade.
See this issue for a detailed discussion, a bunch of related issues, and some workarounds. This more recent report has a bunch of people reporting the same for pip20.
Potentially the easiest solution is to uninstall it:
python -m pip uninstall pip
Which should bring you back to the "system" pip installation. And then just ignore the warning, or only work inside virtualenvs, where you shuold be able to safely use updated pip.
Another possible workaround is to install an older version manually using the get-pip script:
python get-pip.py pip==19.3.1
Note: If anyone has better advice please feel free to comment / correct me.

How can pip know a package's last version?

I use pip to manage my packages, but how can I know a package's newest version?
I use the
pip install --upgrade eventlet
find the result the version did not change. still is eventlet (0.21.0).
But in the GitHub, you see the doc the newest version is v0.22.1.

If a package is not updated on pypi, you cannot pip install packagename to get the latest version. If you absolutely want the latest version you can install it directly from git
git clone <git URL of library>
cd into the directory and install the package:
sudo python setup.py install

if you want to get the list of all the modules that can be updated i.e. the modules with updated available you can use:
pip list --outdated
This will give you the output like
....
ipython (6.2.1) - Latest: 6.3.1 [wheel]
....
allowing you to chose the packages you want to update

Keep getting the "Command "python setup.py egg_info" failed with error code 1" [duplicate]

I'm trying to install some packages with pip.
But pip install unroll gives me
Command "python setup.py egg_info" failed with error code 1 in
C:\Users\MARKAN~1\AppData\Local\Temp\pip-build-wa7uco0k\unroll\
How can I solve this?

About the error code
According to the Python documentation:
This module makes available standard errno system symbols. The value of each symbol is the corresponding integer value. The names and descriptions are borrowed from linux/include/errno.h, which should be pretty all-inclusive.
Error code 1 is defined in errno.h and means Operation not permitted.
About your error
Your setuptools do not appear to be installed. Just follow the Installation Instructions from the PyPI website.
If it's already installed, try
pip install --upgrade setuptools
If it's already up to date, check that the module ez_setup is not missing. If it is, then
pip install ez_setup
Then try again
pip install unroll
If it's still not working, maybe pip didn't install/upgrade setup_tools properly so you might want to try
easy_install -U setuptools
And again
pip install unroll

Here's a little guide explaining a little bit how I usually install new packages on Python + Windows. It seems you're using Windows paths, so this answer will stick to that particular SO:
I never use a system-wide Python installation. I only use virtualenvs, and usually I try to have the latest version of 2.x & 3.x.
My first attempt is always doing pip install package_i_want in some of my Visual Studio command prompts. What Visual Studio command prompt? Well, ideally the Visual Studio which matches the one which was used to build Python. For instance, let's say your Python installation says Python 2.7.11 (v2.7.11:6d1b6a68f775, Dec 5 2015, 20:40:30) [MSC v.1500 64 bit (AMD64)] on win32. The version of Visual Studio used to compile Python can be found here, so v1500 means I'd be using vs2008 x64 command prompt
If the previous step failed for some reason I just try using easy_install package_i_want
If the previous step failed for some reason I go to gohlke website and I check whether my package is available over there. If it's so, I'm lucky, I just download it into my virtualenv and then I just go to that location using a command prompt and I do pip install package_i_want.whl
If the previous step didn't succeed I'll just try to build the wheel myself and once it's generated I'll try to install it with pip install package_i_want.whl
Now, if we focus in your specific problem, where you're having a hard time installing the unroll package. It seems the fastest way to install it is doing something like this:
git clone https://github.com/Zulko/unroll
cd unroll && python setup.py bdist_wheel
Copy the generated unroll-0.1.0-py2-none-any.whl file from the created dist folder into your virtualenv.
pip install unroll-0.1.0-py2-none-any.whl
That way it will install without any problems. To check it really works, just login into the Python installation and try import unroll, it shouldn't complain.
One last note: This method works almost 99% of the time, and sometimes you'll find some pip packages which are specific to Unix or Mac OS X, in that case, when that happens I'm afraid the best way to get a Windows version is either posting some issues to the main developers or having some fun by yourself porting to Windows (typically a few hours if you're not lucky) :)

It was resolved after upgrading pip:
python -m pip install --upgrade pip
pip install "package-name"

I got stuck exactly with the same error with psycopg2. It looks like I skipped a few steps while installing Python and related packages.
sudo apt-get install python-dev libpq-dev
Go to your virtual env
pip install psycopg2
(In your case you need to replace psycopg2 with the package you have an issue with.)
It worked seamlessly.

I got this same error while installing mitmproxy using pip3. The below command fixed this:
pip3 install --upgrade setuptools

Download and install the Microsoft Visual C++ Compiler for Python 2.7 from https://www.microsoft.com/en-in/download/details.aspx?id=44266 - this package contains the compiler and set of system headers necessary for producing binary wheels for Python 2.7 packages.
Open a command prompt in elevated mode (run as administrator)
Firstly do pip install ez_setup
Then do pip install unroll (It will start installing numpy, music21, decorator, imageio, tqdm, moviepy, unroll) # Please be patient for music21 installation
Python 2.7.11 64 bit used

Other way:
sudo apt-get install python-psycopg2 python-mysqldb

I had the same issue when installing the "Twisted" library and solved it by running the following command on Ubuntu 16.04 (Xenial Xerus):
sudo apt-get install python-setuptools python-dev build-essential

It's a dependency issue.
I tried running the following commands helped me sorting out the dependencies, in my case the dependency was
grpcio
pip3 install --upgrade pip
python3 -m pip install --upgrade setuptools
pip3 install --no-cache-dir --force-reinstall -Iv grpcio==1.36.1
pip3 install pulsar-client==2.7.0
remember you must have python3 installed in your system.

First try:
pip install unroll
For sure not work :)
Then Try:
pip2 install unroll
Still get error Try:
pip3 install unroll
If pip3 Worked then suggest to change configuration to use pip3 as pip because you will get a lot of issues as the modern now is Python3 = pip3 if you execute a script files.

I had the same problem.
The problem was:
pyparsing 2.2 was already installed and my requirements.txt was trying to install pyparsing 2.0.1 which throw this error
Context: I was using virtualenv, and it seems the 2.2 came from my global OS Python site-packages, but even with --no-site-packages flag (now by default in last virtualenv) the 2.2 was still present. Surely because I installed Python from their website and it added Python libraries to my $PATH.
Maybe a pip install --ignore-installed would have worked.
Solution: as I needed to move forwards, I just removed the pyparsing==2.0.1 from my requirements.txt.

I ran into the same error code when trying to install a Python module with pip.
#Hackndo noted that the documentation indicate a security issue.
Based on that answer, my problem was solved by running the pip install command with sudo prefixed:
sudo pip install python-mpd2

For me this worked
python3 -m pip3 install -U pip
you can also try
python -m pip install -U pip

pip3 install --upgrade setuptools
WARNING: pip is being invoked by an old script wrapper. This will fail in a future version of pip.
Please see https://github.com/pypa/pip/issues/5599 for advice on fixing the underlying issue.
To avoid this problem you can invoke Python with -m pip instead of running pip directly.
Use python3 -m pip "command", eg:
python3 -m pip install --user pyqt5

I tried all of the above with no success. I then updated my Python version from 2.7.10 to 2.7.13, and it resolved the problems that I was experiencing.

That means some packages in pip are old or not correctly installed.
Try checking version and then upgrading pip.Use auto remove if that works.
If the pip command shows an error all the time for any command or it freezes, etc.
The best solution is to uninstall it or remove it completely.
Install a fresh pip and then update and upgrade your system.
I have given a solution to installing pip fresh here - python: can't open file get-pip.py error 2] no such file or directory

next installation helps me:
pip3 install cython

This worked for me:
sudo xcodebuild -license

Upgrading Python to version 3 fixed my problem. Nothing else did.

I downloaded the .whl file from http://www.lfd.uci.edu/~gohlke/pythonlibs/ and then did:
pip install scipy-0.19.1-cp27-cp27m-win32.whl
Note that the version you need to use (win32/win_amd-64) depends on the version of Python and not that of Windows.

I had this problem using virtualenvs (with pipenv) on my new development setup.
I could only solve it by upgrading the psycopg2 version from 2.6.2 to 2.7.3.
More information is at https://github.com/psycopg/psycopg2/issues/594

I faced the same problem with the same error message but on Ubuntu 16.04 LTS (Xenial Xerus) instead:
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-install-w71uo1rg/poster/
I tested all the solutions provided above and none of them worked for me. I read the full TraceBack and found out I had to create the virtual environment with Python version 2.7 instead (the default one uses Python 3.5 instead):
virtualenv --python=/usr/bin/python2.7 my_venv
Once I activated it, I run pip install unirest successfully.

try on linux:
sudo apt install python-pip python-bluez libbluetooth-dev libboost-python-dev libboost-thread-dev libglib2.0-dev bluez bluez-hcidump

Had the same problem on my Win10 PC with different packages and tried everything mentioned so far.
Finally solved it by disabling Comodo Auto-Containment.
Since nobody has mentioned it yet, I hope it helps someone.

I had the same problem and was able to fix by doing the following.
Windows Python needs Visual C++ libraries installed via the SDK to build code, such as via setuptools.extension.Extension or numpy.distutils.core.Extension. For example, building f2py modules in Windows with Python requires Visual C++ SDK as installed above. On Linux and Mac, the C++ libraries are installed with the compiler.
https://www.scivision.co/python-windows-visual-c++-14-required/

Following below command worked for me
[root#sandbox ~]# pip install google-api-python-client==1.6.4

Methods to solve setup.pu egg_info issue when updating setuptools or not other methods doesnot works.
If CONDA version of the library is available to install use conda instead of pip.
Clone the library repo and then try installation by pip install -e . or by python setup.py install

upgrading python's version did the work for me.

I have just encountered the same problem when trying to pip install -e . a new repo. I did not notice that the contents of setup.py haven't been saved properly and I was effectively running the command with an empty setup.py.
Hence you may experience the same error message if the setup.py of the target package is either empty or malformed.

I solved it on Centos 7 by using:
sudo yum install libcurl-devel

How can I pip freeze and get only pip --user installs, no system installs?

I have dutifully uninstalled all the Python packages I installed with sudo pip install and installed them with pip --user install instead. Yay me :)
On Ubuntu, I know I can find the relevant binaries at /home/<USERNAME>/.local/bin and the packages themselves at /home/<USERNAME>/.local/lib/python2.7/site-packages ... but navigating there is not as simple as good old pip freeze.
How can I pip freeze and get only the packages I installed with pip --user install rather than all the Python packages, including those installed via apt?

Currently pip does not have any such options. So with default pip its not possible. (and I submitted a feature request and now there is a working PR too!)
However I wrote a little script, which does solve your problem:
# pip_user_installs.py
import sys
import pkg_resources
for module in pkg_resources.working_set:
if sys.argv[1] in module.location:
print module.project_name
usage:
$ python pip_user_installs.py $HOME

It's fairly easy in recent versions of pip (the PR in the other answer is now part of pip).
pip freeze --user
This will output a list of packages currently installed to the user's site-packages.

Develop Reference

Python is a programming language that lets you work quickly and integrate systems more effectively.