I'm creating a server with Apache2 + mod_python + Django for development and would like to know how to use Mercurial to manage application development.
My idea is to make the folder where the Mercurial stores the project be the same folder to deploy Django.
Thank you for your attention!
I thought about this, good idea for development.
Use mercurial in common way. And of course you need deploy mercurial server before.
If you update your django project, it will be compiled on the fly.
My workflow:
Set up mercurial server or use bitbucket
Init repo locally
Push repo to central repo
On server pull repo in some target dir
Edit smth locally and push to central repo
Pull repo on server and everything is fine
Related
Comming from PHP(without frameworks), I don't quite understand how deploying works in Python. I have completed my simple Django version: (1, 10, 1, 'final', 1) blog project and all I have to do is put it online. I am using linux openSUSE distro and virtualenv
I have access to a mysql database with phpmyadmin and I have some space, accessed with filezilla. hosting site: https://host.bg/
But then I started researching of how to deploy my project and I stumbled upon stuf like apache, Nginx, wsgi and other stuff I haven't used in the project and not quite familiar how they work.
So my question is: Can I make my project into a folder with some files in it, copy->paste them in filezilla and have a working site and if not, how does django deployment really work and what should I do from here ?!
I would recommend you to use Git instead of FTP protocol. As you are using Linux you can easily connect to your SO using ssh.
About the deployment, I would recommend you to use GUnicorn for a WSGI way.
It's not hard to deploy with, but if you get in trouble you can use the official Django documentation for deploying Django with WSGI:
Link
Ps.: As you are using Linux, I would recommend to you to use VirtualEnv to allow you server many Django sites in the same Linux instance with the isolated environments
Check what version of Python is installed on the server hosting your account and if there's option for ssh access.
Host.bg and Bulgarian hosting providers in general fail to keep up with most things other than php and mysql. With shared plans they avoid installing anything new too.
I'd say contact support and see if they would be able to assist you with Apache configurations and whatever else is needed for your project.
I'm wondering what steps are evolved in moving a django project to a new server.
basicly i'm completely new to Django and have a few questions. The server it is on is now is not stable so I need to act fast. I did not build the app that is there but have pulled down the www folder from the root server. The server is running centOS.
Questions.
is Django backwards compatible or will I need to insure that the same version is installed?
Apart from moving the files what other steps are involved in running the app?
Will I need to use centOS or will any linux server do?
I have a database cluster of PostgreSQL ready to go also.
Start with the docs here - this will give you a good overview.
To your specific questions:
1/ Django is not backwards compatible. You should install 1.6.x. Likely, there's a requirements.txt file in the root directory of your app. On your new server, install pip and then pip install -r requirements.txt will install your dependencies. I would personally use virtualenvwrapper to manage your dependencies on the server
2/ Check the docs, but the main steps are:
Choose a web server. I personally use nginx. You'll need to setup your nginx.conf.
Choose a Python WSGI HTTP Server - I use gunicorn. You'll also need to configure this. This tutorial is a great place to start.
If you use the DigitalOcean tutorial above, any linux server will do. Last, you'll need to upload your Postgres database to the server but sounds like you're able to do that.
3/ You will need to edit your settings.py of the Django project and update certain variables.
If you're changing your database, as well as the app deployment, you'll need to edit the database connection, run ./manage.py syncdb and ./manage.py migrate (if you're using South) to set up the database schema.
It's also recommended to change the SECRET_KEY between deployments.
If you're deploying on a different hosts, you'll need to edit ALLOWED_HOSTS appropriately for your new deployment as well.
Good luck!
Can anyone help to point us to instructions on how to get Django >1.5 working on Google App Engine? I have seen a number of people claim they have Django 1.6 working. We'd like to get 1.6 or 1.7 running. I have searched here for instructions on how to set this up. No luck so far.
Update:
In our development machine we have Django 1.7 installed (both /user/local and on virtualenv). However, if we modify GAE yaml to use Django 1.7 we get the following error messages:
google.appengine.api.yaml_errors.EventError: django version "1.7" is not supported, use one of: "1.2", "1.3", "1.4", "1.5" or "latest" ("latest" recommended for development only) in "./app.yaml",
The version 1.9.12 GoogleAppEngine sdk install in our /Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/lib directory shows the following Django versions listed:
django-0.96 django-1.2 django-1.3 django-1.4 django-1.5
My question is related to how to get our development environment setup correctly for Django 1.7 on Google App Engine and how to make sure we successfully deploy our app with Django 1.7 when we deploy to Google App Engine in production. How do we get the Django 1.7 to deploy on GAE when we deploy our app?
You can use any pure Python third party libraries in your Google App Engine application. In order to use a third party library, simply include the files in your application's directory, and they will be uploaded with your application when you deploy it to our system. You can import the files as you would any other Python files with your application.
I have application using Django 1.7 this way and everything is working fine. However, sometimes you may need to sort of hack something due to the App Engine limitations and its specifics. But it depends on your use cases.
I would also suggest to use virtual environment for your project. Install each library that is not supported by App Engine directly via pip and then create a symlink in your application directory pointing to the given library.
This way you can keep all required packages in a file (e.g. requirements.txt) that can be stored in SCM system (e.g. Git) along with your source files and other team members can quite easily replicate your working environment.
Provided that you use virtual environment and install all needed libraries (Django, ...) via pip, here is the directory layout that should work for you.
virtual-env-root
.Python
bin
include
lib
app-engine-project-root
app.yaml
django-project-root
django-app-root
symlink-to-django -> lib/python2.7/site-packages/django
symlink-to-another-lib -> lib/python2.7/site-packages/...
Such a layout can be easily deployed with the below command.
$ appcfg.py update app-engine-project-root
Or tested with App Engine development server.
$ dev_appserver.py app-engine-project-root
UPDATE
Since App Engine Python SDK version 1.9.15 you can use the vendoring mechanism to set up third party libraries. You do not have to create symlinks in your application directory pointing to the Python lib folder anymore.
Create lib directory directly in your application root and tell your app how to find libraries in this directory by means of appengine_config.py file.
from google.appengine.ext import vendor
# Add any libraries installed in the "lib" folder.
vendor.add('lib')
New directory layout follows.
virtual-env-root
.Python
bin
include
lib
app-engine-project-root
lib
app.yaml
appengine_config.py
django-project-root
django-app-root
Use pip with the -t lib flag to install libraries in this directory.
$ pip install -t lib [lib-name]
Or
$ pip install -t lib -r requirements.txt
You cannot - GAE only supports 1.5, and even that is marked as experimental. If you need django 1.7, perhaps you should use Google Compute Engine, which is Google's brand name for virtual machines that you can spool up.
If you are not married to Google App Engine, Heroku supports django 1.7 without issues.
Do you have specific a guide on how to move a Django 1.7 project to
Google Compute Engine? There is a bunch of Google stuff without any
guides on how to make them work.
Here are the steps, but they are the same had you deployed on any other server because GCE just gives you a linux instance:
First, make sure your developer account has a billing method attached to it.
Go to the developer console
Create a new project by clicking on Projects, then Create Project.
Wait as the project is being created (you'll see a progress window on the bottom right of your screen).
Once the project is finished creating, the console will automatically shift to that project's settings:
You can create a new instance, or deploy a ready-made template from the second column. You can see there are popular stacks and software applications for which templates are created.
As there is no django template yet, you will start by creating an instance.
Billing is controlled on a per-project basis, so you'll have enable billing at this point if you haven't done so already.
The next page is where you configure the instance. The fields are self-explanatory. You set the type of machine you like (how many virtual CPUs and memory), where (physically) you prefer the machine to be located, if you want both HTTP and HTTPS ports open, and then a disk image from which the instance will boot:
Once you have configured the machine, it will be brought online booted up and then you'll have access to the terminal via SSH.
From this point forward, you should treat this instance like any linux server. Install whatever you need to make your project work using the normal packaging tools; upload your files, etc.
For Amazon, the process is a bit simpler as there is a large library of AMIs that you can use for a one-click deployment process. AMI is Amazon Machine Image - a template from which you can deploy an instance.
For Heroku, as its a PaaS, you don't have to worry about the hardware components; however as with most PaaS platforms, you don't have write access to the filesystem. So to manage your static assets you have to do some extra work. The easiest option is to create a S3 bucket on Amazon and use that with django-storages. The official django tutorial at heroku suggests the use of dj-static to serve files directly from Heroku. This works fine for testing, but if you want to start uploading files, then you need to handle those correctly.
However, once you sort that out the steps are even simpler:
Pre-requisites:
git
heroku toolbelt
dj-database-url Python package
gunicorn Python package
The basic steps:
Create a git repository (if you have not done already) in your source code directory with git init.
Create a requirements.txt at the root of your project. pip freeze > requirements.txt should do it if you are using a virtual environment. Otherwise, you can create a text file and list the packages you need.
Adjust your settings.py, by adding this line at the very bottom: import dj_database_url
DATABASES['default'] = dj_database_url.config()
Create a Procfile (case is important). This is how you tell Heroku what kind of dyno (process) you need for your application. For django, you need a web dyno so in this file the following line should do: web: gunicorn yourproject.wsgi --log-file -
Create an app on Heroku and deploy. You should run these commands from your source code directory:
heroku create --buildpack https://github.com/heroku/heroku-buildpack-python
heroku addons:add heroku-postgresql:dev
git push heroku master
heroku run python yourproject/manage.py migrate --noinput
heroku run python web/manage.py collectstatic
You only do the first two steps once, then whenever you need to update your application simply git push heroku master to create a new revision on Heroku.
App Engine's Python environment currently knows how to provide Django up to version 1.5 via the libraries: configuration mechanism. This doesn't mean that later versions of Django won't work, only that they aren't yet built in. (I'm not sure why the latest built-in version is 1.5. It may have something to do with AE's historical policy of bundling each supported version of Django with the SDK, which probably needs to be revised to keep the SDK from getting too large.)
You can try to include Django 1.7 with your application files. I haven't tried this with 1.7 specifically yet, but it's worked with previous versions. Some adjustments to sys.path will be needed in your main.py.
Note that there is a limit of 10,000 application files. If you're concerned about this limit, one option is to use Python's zipimport and include Django as a zip archive. https://docs.python.org/2/library/zipimport.html
I installed openstack through DevStack because I had to modify some files.
When I install DevStack, I have all the files under /opt/stack. There I have services folders (glance, keystone...) and libraries folders (python-glanceclient, python-keystoneclient).
If I modify those files, how can I replicate modification on a already deployed Openstack? Installing openstack without devstack builds a different structure of folder.
I mean, where the python-'service'client folders are in a fresh openstack installation?
Thank you
devstack pulls it's openstack software stack from github. the git repot's it installs from are located in /opt/stack.
What you may want to do is fork openstack as well as the repot of the openstack projects you wish to modify, then make your devstack deployment deploy not from the openstack repot, but your own forked repot.
you can do this by modifying the stack.sh script ( I believe ). devstack.org has a line by line explanation of the entire script on their site and that can point you in the right direction.
http://devstack.org/stack.sh.html read this.
once you've deployed using your own git repository you can of course edit and commit back to it. even push to it.
then any other devstack deployment you have can also be setup to pull from your repository instead of the public openstack repos.
of course rebasing later against openstack will be increasingly difficult as openstack developement moves at a fairly brisk pace.
If the modification you are making is one you want to commit back to the open source project check out this site:
http://wiki.openstack.org/HowToContribute
Basically openstack has a commit review and continuous integration environment that is based off of gerrit and jenkins. This is the method by which commits back to the open source repository are gate tested and manually reviewed by other developers before being merged.
If you are intending to deploy this for production use, I recommend against deploying from devstack. This is not the proper way to do that.
I have tried following guides like this one but it just didnt work for me.
So my question is this: What is a good guide for deploying Django, and how do you deploy your Django.
I keep hearing that capastrano is pretty nifty to use, but i have no idea as to how to work it or what it does (apart from automation of deploying code), or even if i want/need to use it or not.
mod_wsgi in combination with a virtualenv for all the dependencies, a mercurial checkout into the virtualenv and a fabric recipe to check out the changes on the server.
I wrote an article about my usual workflow: Deploying Python Web Applications. Hope that helps.
I have had success with mod_wsgi
In my previous work we had real genius guy on deployment duties, he deployed application (Python, SQL, Perl and Java code) as set of deb files built for Ubuntu. Unfortunately now, I have no such support. We are deploying apps manually to virtualenv-ed environments with separate nginx configs for FastCGI. We use paver to deploy to remote servers. It's painful, but it works.
This looks like a good place to start: http://www.unessa.net/en/hoyci/2007/06/using-capistrano-deploy-django-apps/
I use mod_python, and have every site in a git repository with the following subdirs:
mysite
template
media
I have mysite/settings.py in .gitignore, and work like this:
do development on my local machine
create remote repository on webserver
push my changes to webserver repo
set up apache vhost config file, tweak live server settings.py
run git checkout && git reset --hard && sudo /etc/init.d/apache2 restart on webserver repo to get up-to-date version to its working copy and restart apache
repeat steps 1, 3 and 5 whenever change request comes
The easiest way would be to use one of the sites on http://djangofriendly.com/hosts/ that will provide the hosting and set up for you, but even if you're wanting to roll your own it will allow you to see what set up other sites are using.