Develop Reference

Differences between Cython, extending C/C++ with Python.h, etc

Right now I have an image processing algorithm that is roughly 100 lines or so in Python. It takes about 500ms using numpy, PIL and scipy. I am looking to get it faster, and as the actual algorithm seems pretty optimized thus far, I'm wondering if using a different approach such as Cython would improve the times. I believe that I have several different things I could do:
Use Cython to expose relevant parts of the C library to Python.
Use Ctypes to just write everything in C but still have it pure Python (not leaning towards this at all)
Create an extension module in C/C++ and them import it and call the functions. I'm not sure if I would be able to use numpy this way though.
Create a DLL and have Python load it. This doesn't get to use numpy or those modules, but would still be very efficient.
I'm just looking for speed here, not worried about difficulty of the implementation. Is there any one option that is better in this case, are they all the same, or is it even worth doing?

It helps to know what you need to do here.
If you're not using ctypes for function calls, it's unlikely that it will save you anything to just have ctypes types involved. If you already have some DLL lying around with a "solve it for me" function, then sure, ctypes it is.
Cython creates extension modules, so anything you can do with Cython could also be done with an extension module, it just depends on how comfortable you are writing extensions by hand. Cython is more limited than writing extension by hand, and harder to "see" performance in (the rules for optimizing Cython are basically the opposite of optimizing CPython code, and if you forget to cdef the right things, you gain nothing), but Cython is generally simpler too.
Writing a separate non-extension DLL is only worthwhile if you have non-Python uses for it; otherwise, a Python extension is basically just the DLL case, but better integrated.
Basically, by definition, with infinite time and skill, a CPython extension will beat any other option on performance since it can do everything the others do, and more. It's just more work, and easy to make mistakes (because you're writing C, which is error prone).

Interfacing C/C++ libraries with Python

I have a C++ library that I need to be able to interface with python. I read this question to understand the choice I need to adapt.
I saw SWIG and Cython and wanted to go with SWIG, mainly because my python programming experience is very minimal. However, I realise that with Swig I have to write an interface (.i extensions) for every class. Now, my C++ project is huge and I feel it will take me a lot of time to get the wrappers in place (or maybe I am wrong).
So right now since my application is large I need to make a choice. In the quoted thread I came across Boost Python. Now I can no longer decide and want input from people who can tell me the pros and cons of one over the other. Note my preference is on easy of use and how quickly can it be done. I am willing to compromise system performance for this. I would appreciate immensely if someone could provide me a SWIG implemented project or Boost Python implemented project link (a complete module instead of a sample tutorial would be much better !)

Boost::python provides a nearly wrapper-less interface between C++ and Python. It also allows you to write custom converters and other neat things that make the Python interfaces much nicer. The interfaces are pure C++, but they rely on templates and clever design patterns to make it look all nice and declarative. You also get the benefit of your connector code being checked by the compiler directly.
With Swig, you write interface declarations in Swig's own DSL, which takes a few days to get a hang of. In addition, it always inserts a wrapper layer, so it could be a bit slower. However, it does have the nice feature of automatically converting many things for ya without having to declare anything extra. The wrappers it generates are quite hard to debug though.
IMHO boost::python is the better choice, because you're working pretty directly with CPython's native C interfaces. I use Swig for Java and C++ interaction, because JNI is a bear, Python's C interface is actually quite usable all by itself.
If you already have a bunch of Swig wrappers, I would keep those because you'd have to redo all that work. However, starting a new project, or if you require maximum performance, boost::python all the way!

Is there any purpose for a python application use C other than performance?

If Python was so fast as C, the latter would be present in python apps/libraries?
Example: if Python was fast as C would PIL be written completely in Python?

To access "legacy" C libraries and OS facilities.

While you can of course use ctypes to access existing C code, you might not necessarily want to, in sufficiently complex cases: when you're coding to an interface designed for (and implemented in) C, not doing compilation can mean that small errors on the caller's side, that would simply refuse to compile properly in C, can result in crashes of the whole application.
So, using C code (rather than ctypes) for the purpose of reusing good existing C code can make a lot of sense (Cython is fine too, of course, since it does generate C code that, in case of caller-side errors, should fail to compile;-).
Recoding everything from scratch, rather than reusing good, existing, solid and finely tuned code, doesn't make much sense either way, of course -- there are so many interesting new problems to conquer, that spending your time just mimicking an existing, just-fine solution to an old and already-conquered problem is likely not going to be the best, most productive, and most satisfactory way to spend your time;-).

It makes sense to use C modules in Python for:
Performance
Libraries that won't be ported to Python (because of performance reasons, for example) or that use OS-specific functions
Scripting. For example, many games use Python, Lua and other languages as scripting languages. Therefore they expose C/C++ functions to Python.
As to your example: Yes, but Python is inherently slower than C. If both were equally fast, it would make sense to use Python because C code is often more prone to attacks (buffer overflows and stuff).

To access hardware.

Wrapping a C library in Python: C, Cython or ctypes?

I want to call a C library from a Python application. I don't want to wrap the whole API, only the functions and datatypes that are relevant to my case. As I see it, I have three choices:
Create an actual extension module in C. Probably overkill, and I'd also like to avoid the overhead of learning extension writing.
Use Cython to expose the relevant parts from the C library to Python.
Do the whole thing in Python, using ctypes to communicate with the external library.
I'm not sure whether 2) or 3) is the better choice. The advantage of 3) is that ctypes is part of the standard library, and the resulting code would be pure Python – although I'm not sure how big that advantage actually is.
Are there more advantages / disadvantages with either choice? Which approach do you recommend?
Edit: Thanks for all your answers, they provide a good resource for anyone looking to do something similar. The decision, of course, is still to be made for the single case—there's no one "This is the right thing" sort of answer. For my own case, I'll probably go with ctypes, but I'm also looking forward to trying out Cython in some other project.
With there being no single true answer, accepting one is somewhat arbitrary; I chose FogleBird's answer as it provides some good insight into ctypes and it currently also is the highest-voted answer. However, I suggest to read all the answers to get a good overview.
Thanks again.

Warning: a Cython core developer's opinion ahead.
I almost always recommend Cython over ctypes. The reason is that it has a much smoother upgrade path. If you use ctypes, many things will be simple at first, and it's certainly cool to write your FFI code in plain Python, without compilation, build dependencies and all that. However, at some point, you will almost certainly find that you have to call into your C library a lot, either in a loop or in a longer series of interdependent calls, and you would like to speed that up. That's the point where you'll notice that you can't do that with ctypes. Or, when you need callback functions and you find that your Python callback code becomes a bottleneck, you'd like to speed it up and/or move it down into C as well. Again, you cannot do that with ctypes. So you have to switch languages at that point and start rewriting parts of your code, potentially reverse engineering your Python/ctypes code into plain C, thus spoiling the whole benefit of writing your code in plain Python in the first place.
With Cython, OTOH, you're completely free to make the wrapping and calling code as thin or thick as you want. You can start with simple calls into your C code from regular Python code, and Cython will translate them into native C calls, without any additional calling overhead, and with an extremely low conversion overhead for Python parameters. When you notice that you need even more performance at some point where you are making too many expensive calls into your C library, you can start annotating your surrounding Python code with static types and let Cython optimise it straight down into C for you. Or, you can start rewriting parts of your C code in Cython in order to avoid calls and to specialise and tighten your loops algorithmically. And if you need a fast callback, just write a function with the appropriate signature and pass it into the C callback registry directly. Again, no overhead, and it gives you plain C calling performance. And in the much less likely case that you really cannot get your code fast enough in Cython, you can still consider rewriting the truly critical parts of it in C (or C++ or Fortran) and call it from your Cython code naturally and natively. But then, this really becomes the last resort instead of the only option.
So, ctypes is nice to do simple things and to quickly get something running. However, as soon as things start to grow, you'll most likely come to the point where you notice that you'd better used Cython right from the start.

ctypes is your best bet for getting it done quickly, and it's a pleasure to work with as you're still writing Python!
I recently wrapped an FTDI driver for communicating with a USB chip using ctypes and it was great. I had it all done and working in less than one work day. (I only implemented the functions we needed, about 15 functions).
We were previously using a third-party module, PyUSB, for the same purpose. PyUSB is an actual C/Python extension module. But PyUSB wasn't releasing the GIL when doing blocking reads/writes, which was causing problems for us. So I wrote our own module using ctypes, which does release the GIL when calling the native functions.
One thing to note is that ctypes won't know about #define constants and stuff in the library you're using, only the functions, so you'll have to redefine those constants in your own code.
Here's an example of how the code ended up looking (lots snipped out, just trying to show you the gist of it):
from ctypes import *
d2xx = WinDLL('ftd2xx')
OK = 0
INVALID_HANDLE = 1
DEVICE_NOT_FOUND = 2
DEVICE_NOT_OPENED = 3
...
def openEx(serial):
serial = create_string_buffer(serial)
handle = c_int()
if d2xx.FT_OpenEx(serial, OPEN_BY_SERIAL_NUMBER, byref(handle)) == OK:
return Handle(handle.value)
raise D2XXException
class Handle(object):
def __init__(self, handle):
self.handle = handle
...
def read(self, bytes):
buffer = create_string_buffer(bytes)
count = c_int()
if d2xx.FT_Read(self.handle, buffer, bytes, byref(count)) == OK:
return buffer.raw[:count.value]
raise D2XXException
def write(self, data):
buffer = create_string_buffer(data)
count = c_int()
bytes = len(data)
if d2xx.FT_Write(self.handle, buffer, bytes, byref(count)) == OK:
return count.value
raise D2XXException
Someone did some benchmarks on the various options.
I might be more hesitant if I had to wrap a C++ library with lots of classes/templates/etc. But ctypes works well with structs and can even callback into Python.

Cython is a pretty cool tool in itself, well worth learning, and is surprisingly close to the Python syntax. If you do any scientific computing with Numpy, then Cython is the way to go because it integrates with Numpy for fast matrix operations.
Cython is a superset of Python language. You can throw any valid Python file at it, and it will spit out a valid C program. In this case, Cython will just map the Python calls to the underlying CPython API. This results in perhaps a 50% speedup because your code is no longer interpreted.
To get some optimizations, you have to start telling Cython additional facts about your code, such as type declarations. If you tell it enough, it can boil the code down to pure C. That is, a for loop in Python becomes a for loop in C. Here you will see massive speed gains. You can also link to external C programs here.
Using Cython code is also incredibly easy. I thought the manual makes it sound difficult. You literally just do:
$ cython mymodule.pyx
$ gcc [some arguments here] mymodule.c -o mymodule.so
and then you can import mymodule in your Python code and forget entirely that it compiles down to C.
In any case, because Cython is so easy to setup and start using, I suggest trying it to see if it suits your needs. It won't be a waste if it turns out not to be the tool you're looking for.

For calling a C library from a Python application there is also cffi which is a new alternative for ctypes. It brings a fresh look for FFI:
it handles the problem in a fascinating, clean way (as opposed to ctypes)
it doesn't require to write non Python code (as in SWIG, Cython, ...)

I'll throw another one out there: SWIG
It's easy to learn, does a lot of things right, and supports many more languages so the time spent learning it can be pretty useful.
If you use SWIG, you are creating a new python extension module, but with SWIG doing most of the heavy lifting for you.

Personally, I'd write an extension module in C. Don't be intimidated by Python C extensions -- they're not hard at all to write. The documentation is very clear and helpful. When I first wrote a C extension in Python, I think it took me about an hour to figure out how to write one -- not much time at all.

If you have already a library with a defined API, I think ctypes is the best option, as you only have to do a little initialization and then more or less call the library the way you're used to.
I think Cython or creating an extension module in C (which is not very difficult) are more useful when you need new code, e.g. calling that library and do some complex, time-consuming tasks, and then passing the result to Python.
Another approach, for simple programs, is directly do a different process (compiled externally), outputting the result to standard output and call it with subprocess module. Sometimes it's the easiest approach.
For example, if you make a console C program that works more or less that way
$miCcode 10
Result: 12345678
You could call it from Python
>>> import subprocess
>>> p = subprocess.Popen(['miCcode', '10'], shell=True, stdout=subprocess.PIPE)
>>> std_out, std_err = p.communicate()
>>> print std_out
Result: 12345678
With a little string formating, you can take the result in any way you want. You can also capture the standard error output, so it's quite flexible.

ctypes is great when you've already got a compiled library blob to deal with (such as OS libraries). The calling overhead is severe, however, so if you'll be making a lot of calls into the library, and you're going to be writing the C code anyway (or at least compiling it), I'd say to go for cython. It's not much more work, and it'll be much faster and more pythonic to use the resulting pyd file.
I personally tend to use cython for quick speedups of python code (loops and integer comparisons are two areas where cython particularly shines), and when there is some more involved code/wrapping of other libraries involved, I'll turn to Boost.Python. Boost.Python can be finicky to set up, but once you've got it working, it makes wrapping C/C++ code straightforward.
cython is also great at wrapping numpy (which I learned from the SciPy 2009 proceedings), but I haven't used numpy, so I can't comment on that.

I know this is an old question but this thing comes up on google when you search stuff like ctypes vs cython, and most of the answers here are written by those who are proficient already in cython or c which might not reflect the actual time you needed to invest to learn those to implement your solution. I am a complete beginner in both. I have never touched cython before, and have very little experience on c/c++.
For the last two days, I was looking for a way to delegate a performance heavy part of my code to something more low level than python. I implemented my code both in ctypes and Cython, which consisted basically of two simple functions.
I had a huge string list that needed to processed. Notice list and string.
Both types do not correspond perfectly to types in c, because python strings are by default unicode and c strings are not. Lists in python are simply NOT arrays of c.
Here is my verdict. Use cython. It integrates more fluently to python, and easier to work with in general. When something goes wrong ctypes just throws you segfault, at least cython will give you compile warnings with a stack trace whenever it is possible, and you can return a valid python object easily with cython.
Here is a detailed account on how much time I needed to invest in both them to implement the same function. I did very little C/C++ programming by the way:
Ctypes:
About 2h on researching how to transform my list of unicode strings to a c compatible type.
About an hour on how to return a string properly from a c function. Here I actually provided my own solution to SO once I have written the functions.
About half an hour to write the code in c, compile it to a dynamic library.
10 minutes to write a test code in python to check if c code works.
About an hour of doing some tests and rearranging the c code.
Then I plugged the c code into actual code base, and saw that ctypes does not play well with multiprocessing module as its handler is not pickable by default.
About 20 minutes I rearranged my code to not use multiprocessing module, and retried.
Then second function in my c code generated segfaults in my code base although it passed my testing code. Well, this is probably my fault for not checking well with edge cases, I was looking for a quick solution.
For about 40 minutes I tried to determine possible causes of these segfaults.
I split my functions into two libraries and tried again. Still had segfaults for my second function.
I decided to let go of the second function and use only the first function of c code and at the second or third iteration of the python loop that uses it, I had a UnicodeError about not decoding a byte at the some position though I encoded and decoded everthing explicitely.
At this point, I decided to search for an alternative and decided to look into cython:
Cython
10 min of reading cython hello world.
15 min of checking SO on how to use cython with setuptools instead of distutils.
10 min of reading on cython types and python types. I learnt I can use most of the builtin python types for static typing.
15 min of reannotating my python code with cython types.
10 min of modifying my setup.py to use compiled module in my codebase.
Plugged in the module directly to the multiprocessing version of codebase. It works.
For the record, I of course, did not measure the exact timings of my investment. It may very well be the case that my perception of time was a little to attentive due too mental effort required while I was dealing with ctypes. But it should convey the feel of dealing with cython and ctypes

There is one issue which made me use ctypes and not cython and which is not mentioned in other answers.
Using ctypes the result does not depend on compiler you are using at all. You may write a library using more or less any language which may be compiled to native shared library. It does not matter much, which system, which language and which compiler. Cython, however, is limited by the infrastructure. E.g, if you want to use intel compiler on windows, it is much more tricky to make cython work: you should "explain" compiler to cython, recompile something with this exact compiler, etc. Which significantly limits portability.

If you are targeting Windows and choose to wrap some proprietary C++ libraries, then you may soon discover that different versions of msvcrt***.dll (Visual C++ Runtime) are slightly incompatible.
This means that you may not be able to use Cython since resulting wrapper.pyd is linked against msvcr90.dll (Python 2.7) or msvcr100.dll (Python 3.x). If the library that you are wrapping is linked against different version of runtime, then you're out of luck.
Then to make things work you'll need to create C wrappers for C++ libraries, link that wrapper dll against the same version of msvcrt***.dll as your C++ library. And then use ctypes to load your hand-rolled wrapper dll dynamically at the runtime.
So there are lots of small details, which are described in great detail in following article:
"Beautiful Native Libraries (in Python)": http://lucumr.pocoo.org/2013/8/18/beautiful-native-libraries/

There's also one possibility to use GObject Introspection for libraries that are using GLib.

Python: SWIG vs ctypes

In python, under what circumstances is SWIG a better choice than ctypes for calling entry points in shared libraries? Let's assume you don't already have the SWIG interface file(s). What are the performance metrics of the two?

I have a rich experience of using swig. SWIG claims that it is a rapid solution for wrapping things. But in real life...
Cons:
SWIG is developed to be general, for everyone and for 20+ languages. Generally, it leads to drawbacks:
- needs configuration (SWIG .i templates), sometimes it is tricky,
- lack of treatment of some special cases (see python properties further),
- lack of performance for some languages.
Python cons:
1) Code style inconsistency. C++ and python have very different code styles (that is obvious, certainly), the possibilities of a swig of making target code more Pythonish is very limited. As an example, it is butt-heart to create properties from getters and setters. See this q&a
2) Lack of broad community. SWIG has some good documentation. But if one caught something that is not in the documentation, there is no information at all. No blogs nor googling helps. So one has to heavily dig SWIG generated code in such cases... That is terrible, I could say...
Pros:
In simple cases, it is really rapid, easy and straight forward
If you produced swig interface files once, you can wrap this C++ code to ANY of other 20+ languages (!!!).
One big concern about SWIG is a performance. Since version 2.04 SWIG includes '-builtin' flag which makes SWIG even faster than other automated ways of wrapping. At least some benchmarks shows this.
When to USE SWIG?
So I concluded for myself two cases when the swig is good to use:
2) If one needs to wrap C++ code for several languages. Or if potentially there could be a time when one needs to distribute the code for several languages. Using SWIG is reliable in this case.
1) If one needs to rapidly wrap just several functions from some C++ library for end use.
Live experience
Update :
It is a year and a half passed as we did a conversion of our library by using SWIG.
First, we made a python version. There were several moments when we experienced troubles with SWIG - it is true. But right now we expanded our library to Java and .NET. So we have 3 languages with 1 SWIG. And I could say that SWIG rocks in terms of saving a LOT of time.
Update 2:
It is two years as we use SWIG for this library. SWIG is integrated into our build system. Recently we had major API change of C++ library. SWIG worked perfectly. The only thing we needed to do is to add several %rename to .i files so our CppCamelStyleFunctions() now looks_more_pythonish in python. First I was concerned about some problems that could arise, but nothing went wrong. It was amazing. Just several edits and everything distributed in 3 languages. Now I am confident that it was a good solution to use SWIG in our case.
Update 3:
It is 3+ years we use SWIG for our library. Major change: python part was totally rewritten in pure python. The reason is that Python is used for the majority of applications of our library now. Even if the pure python version works slower than C++ wrapping, it is more convenient for users to work with pure python, not struggling with native libraries.
SWIG is still used for .NET and Java versions.
The Main question here "Would we use SWIG for python if we started the project from the beginning?". We would! SWIG allowed us to rapidly distribute our product to many languages. It worked for a period of time which gave us the opportunity for better understanding our users requirements.

SWIG generates (rather ugly) C or C++ code. It is straightforward to use for simple functions (things that can be translated directly) and reasonably easy to use for more complex functions (such as functions with output parameters that need an extra translation step to represent in Python.) For more powerful interfacing you often need to write bits of C as part of the interface file. For anything but simple use you will need to know about CPython and how it represents objects -- not hard, but something to keep in mind.
ctypes allows you to directly access C functions, structures and other data, and load arbitrary shared libraries. You do not need to write any C for this, but you do need to understand how C works. It is, you could argue, the flip side of SWIG: it doesn't generate code and it doesn't require a compiler at runtime, but for anything but simple use it does require that you understand how things like C datatypes, casting, memory management and alignment work. You also need to manually or automatically translate C structs, unions and arrays into the equivalent ctypes datastructure, including the right memory layout.
It is likely that in pure execution, SWIG is faster than ctypes -- because the management around the actual work is done in C at compiletime rather than in Python at runtime. However, unless you interface a lot of different C functions but each only a few times, it's unlikely the overhead will be really noticeable.
In development time, ctypes has a much lower startup cost: you don't have to learn about interface files, you don't have to generate .c files and compile them, you don't have to check out and silence warnings. You can just jump in and start using a single C function with minimal effort, then expand it to more. And you get to test and try things out directly in the Python interpreter. Wrapping lots of code is somewhat tedious, although there are attempts to make that simpler (like ctypes-configure.)
SWIG, on the other hand, can be used to generate wrappers for multiple languages (barring language-specific details that need filling in, like the custom C code I mentioned above.) When wrapping lots and lots of code that SWIG can handle with little help, the code generation can also be a lot simpler to set up than the ctypes equivalents.

CTypes is very cool and much easier than SWIG, but it has the drawback that poorly or malevolently-written python code can actually crash the python process. You should also consider boost python. IMHO it's actually easier than swig while giving you more control over the final python interface. If you are using C++ anyway, you also don't add any other languages to your mix.

In my experience, ctypes does have a big disadvantage: when something goes wrong (and it invariably will for any complex interfaces), it's a hell to debug.
The problem is that a big part of your stack is obscured by ctypes/ffi magic and there is no easy way to determine how did you get to a particular point and why parameter values are what they are..

You can also use Pyrex, which can act as glue between high-level Python code and low-level C code. lxml is written in Pyrex, for instance.

ctypes is great, but does not handle C++ classes. I've also found ctypes is about 10% slower than a direct C binding, but that will highly depend on what you are calling.
If you are going to go with ctypes, definitely check out the Pyglet and Pyopengl projects, that have massive examples of ctype bindings.

I'm going to be contrarian and suggest that, if you can, you should write your extension library using the standard Python API. It's really well-integrated from both a C and Python perspective... if you have any experience with the Perl API, you will find it a very pleasant surprise.
Ctypes is nice too, but as others have said, it doesn't do C++.
How big is the library you're trying to wrap? How quickly does the codebase change? Any other maintenance issues? These will all probably affect the choice of the best way to write the Python bindings.

Just wanted to add a few more considerations that I didn't see mentioned yet.
[EDIT: Ooops, didn't see Mike Steder's answer]
If you want to try using a non Cpython implementation (like PyPy, IronPython or Jython), then ctypes is about the only way to go. PyPy doesn't allow writing C-extensions, so that rules out pyrex/cython and Boost.python. For the same reason, ctypes is the only mechanism that will work for IronPython and (eventually, once they get it all working) jython.
As someone else mentioned, no compilation is required. This means that if a new version of the .dll or .so comes out, you can just drop it in, and load that new version. As long as the none of the interfaces changed, it's a drop in replacement.

Something to keep in mind is that SWIG targets only the CPython implementation. Since ctypes is also supported by the PyPy and IronPython implementations it may be worth writing your modules with ctypes for compatibility with the wider Python ecosystem.

I have found SWIG to be be a little bloated in its approach (in general, not just Python) and difficult to implement without having to cross the sore point of writing Python code with an explicit mindset to be SWIG friendly, rather than writing clean well-written Python code. It is, IMHO, a much more straightforward process to write C bindings to C++ (if using C++) and then use ctypes to interface to any C layer.
If the library you are interfacing to has a C interface as part of the library, another advantage of ctypes is that you don't have to compile a separate python-binding library to access third-party libraries. This is particularly nice in formulating a pure-python solution that avoids cross-platform compilation issues (for those third-party libs offered on disparate platforms). Having to embed compiled code into a package you wish to deploy on something like PyPi in a cross-platform friendly way is a pain; one of my most irritating points about Python packages using SWIG or underlying explicit C code is their general inavailability cross-platform. So consider this if you are working with cross-platform available third party libraries and developing a python solution around them.
As a real-world example, consider PyGTK. This (I believe) uses SWIG to generate C code to interface to the GTK C calls. I used this for the briefest time only to find it a real pain to set up and use, with quirky odd errors if you didn't do things in the correct order on setup and just in general. It was such a frustrating experience, and when I looked at the interace definitions provided by GTK on the web I realized what a simple excercise it would be to write a translator of those interface to python ctypes interface. A project called PyGGI was born, and in ONE day I was able to rewrite PyGTK to be a much more functiona and useful product that matches cleanly to the GTK C-object-oriented interfaces. And it required no compilation of C-code making it cross-platform friendly. (I was actually after interfacing to webkitgtk, which isn't so cross-platform). I can also easily deploy PyGGI to any platform supporting GTK.