I'm reading the book Introduction to Computer Science Using Python and Pygame by Paul Craven (note: legally available for free online). In the book, he uses a combination of Python 3.1.3 and Pygame 1.9.1 . In my Linux Ubuntu machine, I have Python 3.1.2 but even after I sudo apt-get installed python-pygame (version 1.9.1), Python 3.1.2 can't import pygame.
Python 3.1.2 (r312:79147, Sep 27 2010, 09:45:41)
[GCC 4.4.3] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pygame
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named pygame
Python 2.6.5 imports it without fuss, however,
Python 2.6.5 (r265:79063, Apr 16 2010, 13:09:56)
[GCC 4.4.3] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pygame
>>>
Are you aware of any issues for Linux/Ubuntu's Python 3.1.2 (Prof. Craven used Windows in his book)? How come Pygame 1.9.1 worked for Python 3.1.3 but not for 3.1.2?
Thanks for any pointers. (--,)
PyGame on Python 3 remains experimental, but these steps worked for me on Ubuntu 11.10:
sudo apt-get install mercurial python3-dev libjpeg-dev libpng12-dev libportmidi-dev libsdl-image1.2-dev libsdl-mixer1.2-dev libsdl-ttf2.0-dev libsdl1.2-dev libsmpeg-dev libx11-dev ttf-freefont libavformat-dev libswscale-dev
hg clone -u 01b2cb16dc17 https://bitbucket.org/pygame/pygame
cd pygame
python3 config.py
2to3 setup.py -w
python3 setup.py build
sudo python3 setup.py install
(You may remove the -u 01b2cb16dc17 to try the latest version; 01b2cb16dc17 worked for me.)
I hate to re-open an old post, but I had the hardest time installing pygame with a version of python that was not Ubuntu's default build. So I created this tutorial/ how to:
Install python3.1 and pygame1.9.1 in Ubuntu
I hopes this helps the next unfortunate soul to try this.
I installed pygame for python3 quite easily using the pip3 (a tool for installing and managing Python packages) command on Ubuntu 16.04.7 LTS.
Open a terminal and install pip3, type sudo apt install python3-pip
Now use it to install pygame for python3, type pip3 install pygame
That's it! Import the library and confirm that everything works:
# I'll try it out using the python 3 interpreter.
python3 --version
Python 3.5.2
robert#robert-E7212:~/Source/Python/python_crash_course/alien_invasion$ python3
Python 3.5.2 (default, Oct 7 2020, 17:19:02)
[GCC 5.4.0 20160609] on linux
Type "help", "copyright", "credits" or "license" for more information.
# No errors, pygame was imported successfully!
>>> import pygame
pygame 2.0.0 (SDL 2.0.12, python 3.5.2)
Hello from the pygame community. https://www.pygame.org/contribute.html
>>>
I followed #Søren 's method, but without the -u number.
The only complication was a few compilation errors at the last line, all due to syntax and unicode differences between Python 2 and Python 3, but with a little checking of the web documentation it was a matter of a few minutes with a text editor modifying the following files (all paths are relative to the pygame directory created during the download):
gedit build/lib.linux-x86_64-3.2/pygame/colordict.py
gedit build/lib.linux-x86_64-3.2/pygame/tests/test-utils/png.py
gedit build/lib.linux-x86_64-3.2/pygame/examples/movieplayer.py
The line numbers from the compiler error messages are great for giving you where to start. The things to look out for are:
1 remove all references to u"xxxx" colours
2 use Python3 syntax for exceptions
3 change all print commands to Python3 equivalents
Then re-issue the final compilation command:
sudo python3 setup.py install
If you miss one or two or get it wrong, just keep going round the loop editing and re-compiling till it works.
BTW I deliberately did not give details of the compiler messages, because I expect they will depend on the current build you download. The files I needed to change were for version '1.9.2pre' downloaded as of the date on this post.
Just use the below command to install pygame for Python3. I could install pygame correctly on Ubuntu 16.04 and Python Python 3.5.2.
pip3 install pygame
It's because installing the python-pygame package installs it for the default version of Python on your system, 2.6.5 in this case. You should download the pygame package and use setup.py to install it in 3.1.2.
The python-pygame package is only compiled for python2.6 and python2.7 where I am. You'll have to install it again, possibly from a python3 branch of the source.
Related
I install python 3.6.5_1 using
brew install https://raw.githubusercontent.com/Homebrew/homebrew-core/f2a764ef944b1080be64bd88dca9a1d80130c558/Formula/python.r
and get
Warning: python 3.6.5_1 is already installed
The currently linked version is 3.7.3
You can use brew switch python 3.6.5_1 to link this version.
I use brew switch python 3.6.5_1 and get
Cleaning /usr/local/Cellar/python/3.6.5_1
Cleaning /usr/local/Cellar/python/3.7.3
4 links created for /usr/local/Cellar/python/3.6.5_1
Typing which python3, there is no output, which python gives
/usr/local/bin/python
and typing python3 gives
-bash: /usr/local/bin/python3: No such file or directory
typing python gives
Python 2.7.15 (default, Nov 27 2018, 21:24:58)
[GCC 4.2.1 Compatible Apple LLVM 10.0.0 (clang-1000.11.45.5)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
How do I make sure that the installed python3.6.5_1 is installed at correct location and is the one referred to by python3?
Extra background :
I have been working with OpenCV for around 5 months now, following this installation guide for installing all requirements including python3.6. I was using this version of brew's python instead of mac's one. Recently I had to install FFmpeg, some errors came up, unwittingly I did something (I don't remember, probably unlinked python) and then I wasn't able to install FFmpeg anyway but also this destroyed my workspace. Right now I keep getting the following error everytime I open up terminal:
-bash: /usr/local/bin/python3: No such file or directory
virtualenvwrapper.sh: There was a problem running the initialization hooks.
If Python could not import the module virtualenvwrapper.hook_loader,
check that virtualenvwrapper has been installed for
VIRTUALENVWRAPPER_PYTHON=/usr/local/bin/python3 and that PATH is
set properly.
I tried brew install python3 and that solves the above warning for virtualenvwrapper. But it installs python3.7.3, whereas I need python3.6 for tensor flow etc.
I have such a problem
(face_det) user#pc:~$ python3
Python 3.5.3 (default, Apr 22 2017, 00:00:00)
[GCC 4.8.4] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import cv2
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named 'cv2
I don't have it on python2:
(face_det) user#pc:~$ python2
Python 2.7.13 |Anaconda custom (64-bit)| (default, Dec 20 2016, 23:09:15)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
Anaconda is brought to you by Continuum Analytics.
Please check out: http://continuum.io/thanks and https://anaconda.org
>>> import cv2
>>>
In spite of the fact, that I have opencv (I've also tryed to remove it and install then):
(face_det) user#pc:~$ pip3 install opencv
Requirement already satisfied: opencv in ./.virtualenvs/face_det/lib/python3.5/site-packages
(face_det) user#pc:~$ conda install opencv
Fetching package metadata .........
Solving package specifications: .
# All requested packages already installed.
# packages in environment at /home/pc/anaconda3:
#
opencv 3.2.0 np112py27_0 conda-forge
Try
pip3 install opencv-python
to get the cv2. I'm not sure when opencv-python became available. I'd been building opencv by hand, but when I looked a few weeks ago, there it was. I'm using cv2 with Python3 in a VM that's running ubuntu/trusty64.
Try
sudo python3.5 -m pip install opencv-python
It worked for me
On Windows you can try this:
python3 -m pip install opencv-python
Your conda openCV is installed for use by your home python2.7. Your opencv installed via pip3 is for use in your face_det virtual environment. It doesn't look like you're in that virtual environment when you opened python3 in the first code block. Try
source activate face_det
python3
import cv2
I think you're on Linux judging by pc:~$
Try installing from the following link:
http://docs.opencv.org/3.0-beta/doc/tutorials/introduction/linux_install/linux_install.html
It worked for me, hope the same for you!
I had a similar problem and the same error. In my case, I was using PyCharm. The problem was that the project's interpreter was pointing to a different installation of Python.
In my system, I had four versions of python (eg. python3 installed in a python36 folder, another python in an anaconda3 folder and others). In my PyCharm project, when I examined my settings (under File->Settings->Project:xxxx ->Project interpreter), I found that they were pointing to the interpreter in the anaconda3 folder.
However, my default pip installed the opencv-python module under the python36 folder. Therefore, I just had to change the project interpreter to point to the python installed in python36 folder and it worked.
If you would like to keep using Anaconda3 then you have to browse to the anaconda3 folder and run pip install opencv-python in that folder.
python3 is my local Anaconda version of python, while python3.4 is the system one. I can import gi module with python3.4 (probably because i installed it with sudo apt-get install python3-gi) but python3 doesn't see it:
$ python3 -c 'import gi'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: No module named 'gi'
$ python3.4 -c 'import gi'
$ python3 --version
Python 3.5.1 :: Anaconda 4.0.0 (64-bit)
$ python3.4 --version
Python 3.4.3
$ which python3
/home/kossak/anaconda3/bin/python3
$ which python3.4
/usr/bin/python3.4
$
How should i install gi for Anaconda python? Or maybe i can somehow import sysem-wide modules?
My os:
System: Kernel: 3.19.0-32-generic x86_64 (64 bit gcc: 4.8.2) Desktop: Cinnamon 2.8.8 (Gtk 2.24.23) dm: mdm
Distro: Linux Mint 17.3 Rosa
If you're using conda virtualenv for python-3, you can use
$ conda install -c conda-forge pygobject
in your virtualenv
You can read more about this on:
https://anaconda.org/conda-forge/pygobject
This is how you do it: (example for Linux Mint and python3)
First install gi module using your distro package manager. For Linux Mint it would be:
sudo apt-get install python3-gi
Then run your distro python to check where the module is located:
$ /usr/bin/python3
Python 3.5.2 (default, Sep 10 2016, 08:21:44)
[GCC 5.4.0 20160609] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import gi
>>> print(gi)
<module 'gi' from '/usr/lib/python3/dist-packages/gi/__init__.py'>
So in my case the module gi was installed to /usr/lib/python3/dist-packages/gi. Assuming you have your anaconda installed in /home/kossak/anaconda3, create a link to gi module in the proper folder:
ln -s /usr/lib/python3/dist-packages/gi /home/kossak/anaconda3/lib/python3.5/site-packages/
If you have conda virtual environment and want gi module to be available there, the path should be a bit different. Assuming the virtual env is called TEST:
ln -s /usr/lib/python3/dist-packages/gi /home/kossak/anaconda3/envs/TEST/lib/python3.5/site-packages/
and it works:
$ python3
Python 3.5.2 |Anaconda custom (64-bit)| (default, Jul 2 2016, 17:53:06)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import gi
>>>
If you want to perform a proper install (without soft linking) inside a Linux anaconda environment. Keep in mind that the errors may vary if you have not installed gcc previously (I assumed it was installed by default when I posted, however not everyone does so). Install it if you don't know very well what you're doing to avoid missunderstandings
Create or open your conda environment.
Attemp to install pygobject (don't worry, it will most likely throw an error):
pip install pygobject
In linux, it will promp the usual installation progress followed by an error:
(...) Please, try executing the following in your system:
sudo apt install libgirepository1.0-dev
Depending on your operation sistem or installed dependencies, the command name or package name may vary. Just follow the instructions and allow the system to install your packets. This step doesn't change anything, is just to give you the precise info of the package you need on your system. If you run this on Windows, it will ask you to install a specific version of Visual Studio. If you are in Windows, download the required Visual Studio from MS website, install it, reboot your computer and go to step 5 (in my case I never needed step 4 in windows, however, I'm not a MS expert.
Close your conda environment
conda deactivate
Next you need to install pygobject from conda-forge repository in your conda environment. You can add the repo to your favourite conda package manager or simply run the following command as root (it is important to be root). I did it outside the project, but you may do it inside:
conda install -c conda-forge pygobject
In my case conda was not in the path. I had is installed in:
/opt/anaconda3/bin/
You can run the following command from your normal user to find out where conda is:
which conda
Open the conda environment
source activate <your env name>
or the corresponding anaconda activate syntax (I never use it so I cant remember precisely)
Repeat the first step and now the installation wont fail:
pip install pygobject
OR if you specifically want to install gi you can run:
pip install pgi
the correct package is "pgi" NOT "gi"
As gi is a dependency of pygobject, everything will get properly installed. You can check it by running
python
>>> import gi
You may find the following usefull for Windows, although you may need to work it out a bit:
GStreammer python bindings on Windows
for me
conda install -c pkgw/label/superseded gtk3
worked
I'm having issues installing ncurses for Python3. When I did the normal sudo apt-get install ncurses-dev, it appeared to install for Python2 but when I try to run my script for Python3, it says.
ImportError: No module named curses
How would you get ncurses to work for Python3?
I had this same problem. The issue was that ncurses was not installed on my Ubuntu installation. To fix it, I ran:
sudo apt-get install libncurses-dev
and then reinstalled Python. In my case with:
pyenv install 3.8.1
Answering y when asked continue with installation? (y/N)
This fixed the problem.
Try this:
import curses
curses is ncurses. It's also built in to python, there's nothing to install.
Welcome to Ubuntu 14.04.3 LTS (GNU/Linux 3.13.0-65-generic x86_64)
* Documentation: https://help.ubuntu.com/
Last login: Mon Oct 19 19:06:03 2015 from xxx.xxx.xxx.xxx
me#ubuntu:~$ python3
Python 3.4.0 (default, Jun 19 2015, 14:20:21)
[GCC 4.8.2] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import curses
>>>
Im fairly new to programming and Ubuntu. Yesterday I finally managed to create a dual-boot system, so now I'm running Ubuntu 12.04 LTS.
For a school project, I need to work in Python3 with a module called SPARQLWrapper (https://pypi.python.org/pypi/SPARQLWrapper).
On my freshly installed Ubuntu, I've installed the latest version of Python. When I type "python3" in my terminal, python 3.2.3 starts so thats good.
I installed easy_install (sudo apt-get install python-setuptools), and downloaded and installed the SPARQLWrapper egg file (sudo easy_install SPARQLWrapper-1.5.2-py3.2).
If I run python2 and use "import SPARQLWrapper", it just works. But if I try the same in python3 it gives me the following error:
x#ubuntu:~$ python3
Python 3.2.3 (default, Oct 19 2012, 20:10:41)
[GCC 4.6.3] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import SPARQLWrapper
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named SPARQLWrapper
So my problem is that python3 isn't able to acces the same modules as my python2. How do I fix this?
Thanks!
To install packages for Python3, you need python3's setuptools.
Following are the steps to be followed to install python3's setuptools and SPARQLWrapper
sudo apt-get install python3-setuptools
sudo easy_install3 pip
pip -V This should show the pip corresponding to your python3 installation.
sudo pip install SPARQLWrapper
After doing the above mentioned steps, I get this
~$ python3
Python 3.3.1 (default, Apr 17 2013, 22:30:32)
[GCC 4.7.3] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import SPARQLWrapper
>>> exit()
~$
Each Python installation has its own modules directory. In addition, Python 3 is not backwards compatible and won't generally run Python 2 code. You'll need to find a Python 3 version of the module you need and install it for Python 3.