open persian url domains with urllib2 - python

i'm trying to open an url http://الاعلي-للاتصالات.قطر/ar/news-events/event/future-internet-privacy
with the urllib2.urlopen but it reports always an error.
The similar occurs to http://الاعلي-للاتصالات.قطر/ar ... other pages (chinese ones) are opened ok.
Any ideas to point me to the right way to open those urls?
urllib2.urlopen("http://الاعلي-للاتصالات.قطر/ar/news-events/event/future-internet-privacy").read()
urllib2.urlopen('http://الاعلي-للاتصالات.قطر').read()
[Edited]
the error is :
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.6/urllib2.py", line 126, in urlopen
return _opener.open(url, data, timeout)
File "/usr/lib/python2.6/urllib2.py", line 391, in open
response = self._open(req, data)
File "/usr/lib/python2.6/urllib2.py", line 409, in _open
'_open', req)
File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain
result = func(*args)
File "/usr/lib/python2.6/urllib2.py", line 1170, in http_open
return self.do_open(httplib.HTTPConnection, req)
File "/usr/lib/python2.6/urllib2.py", line 1142, in do_open
h.request(req.get_method(), req.get_selector(), req.data, headers)
File "/usr/lib/python2.6/httplib.py", line 914, in request
self._send_request(method, url, body, headers)
File "/usr/lib/python2.6/httplib.py", line 951, in _send_request
self.endheaders()
File "/usr/lib/python2.6/httplib.py", line 908, in endheaders
self._send_output()
File "/usr/lib/python2.6/httplib.py", line 780, in _send_output
self.send(msg)
File "/usr/lib/python2.6/httplib.py", line 759, in send
self.sock.sendall(str)
I also tried with the u'http://الاعلي-للاتصالات.قطر'.encode('utf-8') but the result url can't be opened too.


As #Donal says, the URL has to be punycoded. Luckily Python includes this already. Here is a sample Python code
domain = "الاعلي-للاتصالات.قطر"
domain_unicode = unicode(domain, "utf8")
domain_idna = domain_unicode.encode("idna")
urllib2.urlopen("http://" + domain_idna).read()
Hope this helps.

Related

Is there a way to solve an ssl error (DH key too small) on python when using pd.read_excel()?

I am trying to read an excel table that can be accessed through an url, and load it into a DataFrame.
I'm using pd.read_excel like so:
url = "https://www.recope.go.cr/wp-content/uploads/2020/09/PRECIOS-HIST%C3%93RICOS-CONSUMIDOR-FINAL-1-2.xls"
df = pd.read_excel(url,header=[2,3,4],nrows=347)
and I get :
Traceback (most recent call last):
File "/usr/local/lib/python3.7/urllib/request.py", line 1350, in do_open
encode_chunked=req.has_header('Transfer-encoding'))
File "/usr/local/lib/python3.7/http/client.py", line 1277, in request
self._send_request(method, url, body, headers, encode_chunked)
File "/usr/local/lib/python3.7/http/client.py", line 1323, in _send_request
self.endheaders(body, encode_chunked=encode_chunked)
File "/usr/local/lib/python3.7/http/client.py", line 1272, in endheaders
self._send_output(message_body, encode_chunked=encode_chunked)
File "/usr/local/lib/python3.7/http/client.py", line 1032, in _send_output
self.send(msg)
File "/usr/local/lib/python3.7/http/client.py", line 972, in send
self.connect()
File "/usr/local/lib/python3.7/http/client.py", line 1447, in connect
server_hostname=server_hostname)
File "/usr/local/lib/python3.7/ssl.py", line 423, in wrap_socket
session=session
File "/usr/local/lib/python3.7/ssl.py", line 870, in _create
self.do_handshake()
File "/usr/local/lib/python3.7/ssl.py", line 1139, in do_handshake
self._sslobj.do_handshake()
ssl.SSLError: [SSL: DH_KEY_TOO_SMALL] dh key too small (_ssl.c:1091)
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/local/lib/python3.7/site-packages/pandas/util/_decorators.py", line 299, in wrapper
return func(*args, **kwargs)
File "/usr/local/lib/python3.7/site-packages/pandas/io/excel/_base.py", line 336, in read_excel
io = ExcelFile(io, storage_options=storage_options, engine=engine)
File "/usr/local/lib/python3.7/site-packages/pandas/io/excel/_base.py", line 1063, in __init__
path=str(self._io), storage_options=storage_options
File "/usr/local/lib/python3.7/site-packages/pandas/io/excel/_base.py", line 939, in inspect_excel_format
content_or_path, "rb", storage_options=storage_options, is_text=False
File "/usr/local/lib/python3.7/site-packages/pandas/io/common.py", line 563, in get_handle
storage_options=storage_options,
File "/usr/local/lib/python3.7/site-packages/pandas/io/common.py", line 288, in _get_filepath_or_buffer
req = urlopen(filepath_or_buffer)
File "/usr/local/lib/python3.7/site-packages/pandas/io/common.py", line 194, in urlopen
return urllib.request.urlopen(*args, **kwargs)
File "/usr/local/lib/python3.7/urllib/request.py", line 222, in urlopen
return opener.open(url, data, timeout)
File "/usr/local/lib/python3.7/urllib/request.py", line 525, in open
response = self._open(req, data)
File "/usr/local/lib/python3.7/urllib/request.py", line 543, in _open
'_open', req)
File "/usr/local/lib/python3.7/urllib/request.py", line 503, in _call_chain
result = func(*args)
File "/usr/local/lib/python3.7/urllib/request.py", line 1393, in https_open
context=self._context, check_hostname=self._check_hostname)
File "/usr/local/lib/python3.7/urllib/request.py", line 1352, in do_open
raise URLError(err)
urllib.error.URLError: <urlopen error [SSL: DH_KEY_TOO_SMALL] dh key too small (_ssl.c:1091)>
I saw something similar in this question but I tried to include the answer code in mine to no avail. I'm a bit new to this but as I couldn't find a solution I thought best to ask here. Is there any way to get around this ssl error?

I tried the solution from the link again and it worked, but I had to change some of the code to:
req = requests.get(url)
df = pd.read_excel(req.content,header=[2,3,4],nrows=347)
For some reason, adding requests made the solution work.

Wrong version of ssl being used when running python 3 script

I'm running a code in python 3 using urlopen():
url = "http://www.ksl.com"
import urllib.request
from urllib.request import Request, urlopen
from bs4 import BeautifulSoup
import ssl
print(ssl.OPENSSL_VERSION)
req = Request(url, headers={'User-Agent': 'Mozilla/5.0'})
html = urlopen(req).read()
html = html.decode('utf-8')
Every time I run it, it pops an error:
Traceback (most recent call last):
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 1254, in do_open
h.request(req.get_method(), req.selector, req.data, headers)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/http/client.py", line 1106, in request
self._send_request(method, url, body, headers)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/http/client.py", line 1151, in _send_request
self.endheaders(body)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/http/client.py", line 1102, in endheaders
self._send_output(message_body)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/http/client.py", line 934, in _send_output
self.send(msg)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/http/client.py", line 877, in send
self.connect()
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/http/client.py", line 1260, in connect
server_hostname=server_hostname)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/ssl.py", line 377, in wrap_socket
_context=self)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/ssl.py", line 752, in __init__
self.do_handshake()
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/ssl.py", line 988, in do_handshake
self._sslobj.do_handshake()
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/ssl.py", line 633, in do_handshake
self._sslobj.do_handshake()
ssl.SSLError: [SSL: SSLV3_ALERT_HANDSHAKE_FAILURE] sslv3 alert handshake failure (_ssl.c:645)
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "PATH TO SCRIPT", line 59, in <module>
html = urlopen(req).read()
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 163, in urlopen
return opener.open(url, data, timeout)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 472, in open
response = meth(req, response)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 582, in http_response
'http', request, response, code, msg, hdrs)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 504, in error
result = self._call_chain(*args)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 444, in _call_chain
result = func(*args)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 696, in http_error_302
return self.parent.open(new, timeout=req.timeout)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 466, in open
response = self._open(req, data)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 484, in _open
'_open', req)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 444, in _call_chain
result = func(*args)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 1297, in https_open
context=self._context, check_hostname=self._check_hostname)
File "/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/urllib/request.py", line 1256, in do_open
raise URLError(err)
urllib.error.URLError: <urlopen error [SSL: SSLV3_ALERT_HANDSHAKE_FAILURE] sslv3 alert handshake failure (_ssl.c:645)>
Looking at similar threads, I've deduced that the version of SSL being used in conjunction with python is probably wrong, however, I haven't been able to solve the problem, and I don't have enough know how to do it myself.
The thing that is weird to me is I haven't changed anything about my computer, and the script was running fine last week!
What gives?

How to read an image url with Unicode characters in Python 2 with urllib?

Requirements: Python 2.7 and no external libraries like Requests or BeautifulSoup :(
I get the error in the traceback from retrieveUrl when I call this url:
u'http://%E7%9F%A5%E3%81%A3%E5%BE%97%E8%A2%8B.biz/wp-content/uploads/2016/10/104743-300x225.jpg'
As you can see, my server already gives me that url nice and uriencoded-ready, but it still blows up.
def retrieveUrl(url):
req = urllib2.Request(url, None, {'User-Agent': 'Mozilla/5.0 (compatible; Anki)'})
filecontents = urllib2.urlopen(req).read()
path = unicode(urllib2.unquote(url.encode("utf8")), "utf8")
filename, file_extension = os.path.splitext(path)
return filename, file_extension, filecontents
Error Traceback
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "C:\Python27\lib\urllib2.py", line 154, in urlopen
return opener.open(url, data, timeout)
File "C:\Python27\lib\urllib2.py", line 431, in open
response = self._open(req, data)
File "C:\Python27\lib\urllib2.py", line 449, in _open
'_open', req)
File "C:\Python27\lib\urllib2.py", line 409, in _call_chain
result = func(*args)
File "C:\Python27\lib\urllib2.py", line 1227, in http_open
return self.do_open(httplib.HTTPConnection, req)
File "C:\Python27\lib\urllib2.py", line 1194, in do_open
h.request(req.get_method(), req.get_selector(), req.data, headers)
File "C:\Python27\lib\httplib.py", line 1057, in request
self._send_request(method, url, body, headers)
File "C:\Python27\lib\httplib.py", line 1097, in _send_request
self.endheaders(body)
File "C:\Python27\lib\httplib.py", line 1053, in endheaders
self._send_output(message_body)
File "C:\Python27\lib\httplib.py", line 897, in _send_output
self.send(msg)
File "C:\Python27\lib\httplib.py", line 859, in send
self.connect()
File "C:\Python27\lib\httplib.py", line 836, in connect
self.timeout, self.source_address)
File "C:\Python27\lib\socket.py", line 557, in create_connection
for res in getaddrinfo(host, port, 0, SOCK_STREAM):
File "C:\Python27\lib\encodings\idna.py", line 164, in encode
result.append(ToASCII(label))
File "C:\Python27\lib\encodings\idna.py", line 76, in ToASCII
label = nameprep(label)
File "C:\Python27\lib\encodings\idna.py", line 38, in nameprep
raise UnicodeError("Invalid character %r" % c)
UnicodeError: Invalid character u'\x9f'
I haven't managed to even figure out what character u'\x9f' is.
Any ideas how I can fix that function to get the filecontents?

unicode Error while adding ppa to ubuntu 17.04

I recently installed ubuntu 17.04 and when I tried to add a ppa, it gave this traceback stating some unicode error("label empty or too long") relating to idna.py, if it helps my internet runs on proxy
I entered the following command:
sudo -E apt-add-repository ppa:numix/ppa
and recieved following error:
Traceback (most recent call last):
File "/usr/lib/python3.5/encodings/idna.py", line 165, in encode
raise UnicodeError("label empty or too long")
UnicodeError: label empty or too long
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 358, in get_ppa_info
ret = get_ppa_info_from_lp(user, ppa)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 94, in get_ppa_info_from_lp
return get_info_from_lp(lp_url)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 88, in get_info_from_lp
return _get_https_content_py3(lp_url)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 112, in _get_https_content_py3
lp_page = urllib.request.urlopen(request, cafile=LAUNCHPAD_PPA_CERT)
File "/usr/lib/python3.5/urllib/request.py", line 163, in urlopen
return opener.open(url, data, timeout)
File "/usr/lib/python3.5/urllib/request.py", line 466, in open
response = self._open(req, data)
File "/usr/lib/python3.5/urllib/request.py", line 484, in _open
'_open', req)
File "/usr/lib/python3.5/urllib/request.py", line 444, in _call_chain
result = func(*args)
File "/usr/lib/python3.5/urllib/request.py", line 1297, in https_open
context=self._context, check_hostname=self._check_hostname)
File "/usr/lib/python3.5/urllib/request.py", line 1254, in do_open
h.request(req.get_method(), req.selector, req.data, headers)
File "/usr/lib/python3.5/http/client.py", line 1107, in request
self._send_request(method, url, body, headers)
File "/usr/lib/python3.5/http/client.py", line 1152, in _send_request
self.endheaders(body)
File "/usr/lib/python3.5/http/client.py", line 1103, in endheaders
self._send_output(message_body)
File "/usr/lib/python3.5/http/client.py", line 934, in _send_output
self.send(msg)
File "/usr/lib/python3.5/http/client.py", line 877, in send
self.connect()
File "/usr/lib/python3.5/http/client.py", line 1253, in connect
super().connect()
File "/usr/lib/python3.5/http/client.py", line 849, in connect
(self.host,self.port), self.timeout, self.source_address)
File "/usr/lib/python3.5/socket.py", line 694, in create_connection
for res in getaddrinfo(host, port, 0, SOCK_STREAM):
File "/usr/lib/python3.5/socket.py", line 733, in getaddrinfo
for res in _socket.getaddrinfo(host, port, family, type, proto, flags):
UnicodeError: encoding with 'idna' codec failed (UnicodeError: label empty or too long)
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.5/encodings/idna.py", line 165, in encode
raise UnicodeError("label empty or too long")
UnicodeError: label empty or too long
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/bin/add-apt-repository", line 122, in <module>
shortcut = shortcut_handler(line)
File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 864, in shortcut_handler
ret = factory(shortcut)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 430, in shortcut_handler
return PPAShortcutHandler(shortcut)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 387, in __init__
info = get_ppa_info(self.shortcut)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 370, in get_ppa_info
_get_suggested_ppa_message(user, ppa))
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 327, in _get_suggested_ppa_message
lp_user = get_info_from_lp(LAUNCHPAD_USER_API % user)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 88, in get_info_from_lp
return _get_https_content_py3(lp_url)
File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 112, in _get_https_content_py3
lp_page = urllib.request.urlopen(request, cafile=LAUNCHPAD_PPA_CERT)
File "/usr/lib/python3.5/urllib/request.py", line 163, in urlopen
return opener.open(url, data, timeout)
File "/usr/lib/python3.5/urllib/request.py", line 466, in open
response = self._open(req, data)
File "/usr/lib/python3.5/urllib/request.py", line 484, in _open
'_open', req)
File "/usr/lib/python3.5/urllib/request.py", line 444, in _call_chain
result = func(*args)
File "/usr/lib/python3.5/urllib/request.py", line 1297, in https_open
context=self._context, check_hostname=self._check_hostname)
File "/usr/lib/python3.5/urllib/request.py", line 1254, in do_open
h.request(req.get_method(), req.selector, req.data, headers)
File "/usr/lib/python3.5/http/client.py", line 1107, in request
self._send_request(method, url, body, headers)
File "/usr/lib/python3.5/http/client.py", line 1152, in _send_request
self.endheaders(body)
File "/usr/lib/python3.5/http/client.py", line 1103, in endheaders
self._send_output(message_body)
File "/usr/lib/python3.5/http/client.py", line 934, in _send_output
self.send(msg)
File "/usr/lib/python3.5/http/client.py", line 877, in send
self.connect()
File "/usr/lib/python3.5/http/client.py", line 1253, in connect
super().connect()
File "/usr/lib/python3.5/http/client.py", line 849, in connect
(self.host,self.port), self.timeout, self.source_address)
File "/usr/lib/python3.5/socket.py", line 694, in create_connection
for res in getaddrinfo(host, port, 0, SOCK_STREAM):
File "/usr/lib/python3.5/socket.py", line 733, in getaddrinfo
for res in _socket.getaddrinfo(host, port, family, type, proto, flags):
UnicodeError: encoding with 'idna' codec failed (UnicodeError: label empty or too long)

This doesn't look like a Unicode problem or a Python problem. It looks like an error in the PPA.
But you need to give more information to let us truly help you. For instance, which PPA are you installing? Has it installed successfully on another system?

httplib2.SSLHandshakeError while Installing Google Cloud SDK

While installing the Google Cloud SDK - Python, a httplib2.SSLHandshakeError keeps occuring. I have configured the unfilled_client_secrets.json (shown below the return). And this has not solved the HandshakeError.
Similar questions have been asked on here below, but none have been explicitly answered. Thank you, in advance for any help you might be able to provide.
~ $ ./google-cloud-sdk/install.sh Welcome to the Google Cloud SDK!
Traceback (most recent call last):
File
"/Users/rptrainor/./google-cloud-sdk/bin/bootstrapping/install.py",
line 206, in
main()
File "/Users/rptrainor/./google-cloud-sdk/bin/bootstrapping/install.py",
line 184, in main
Install(pargs.override_components, pargs.additional_components)
File
"/Users/rptrainor/./google-cloud-sdk/bin/bootstrapping/install.py",
line 130, in Install
_CLI.Execute(['--quiet', 'components', 'list'])
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/calliope/cli.py",
line 759, in Execute
self._HandleAllErrors(exc, command_path_string, specified_arg_names)
File
"/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/calliope/cli.py",
line 737, in Execute
resources = args.calliope_command.Run(cli=self, args=args)
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/calliope/backend.py",
line 741, in Run
display_info=self.ai.display_info).Display()
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/calliope/display.py",
line 427, in Display
self._printer.Print(self._resources)
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/resource/resource_printer_base.py", line 251, in Print
for resource in resources:
File "/Users/rptrainor/google-cloud-sdk/lib/surface/components/list.py",
line 86, in Run
result = update_manager.List()
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/updater/update_manager.py",
line 516, in List
_, diff = self._GetStateAndDiff(command_path='components.list')
File
"/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/updater/update_manager.py",
line 446, in _GetStateAndDiff
command_path=command_path)
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/updater/update_manager.py",
line 429, in _GetLatestSnapshot
*effective_url.split(','), command_path=command_path)
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/updater/snapshots.py",
line 165, in FromURLs
for url in urls]
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/updater/snapshots.py",
line 186, in _DictFromURL
response = installers.ComponentInstaller.MakeRequest(url, command_path)
File
"/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/updater/installers.py",
line 283, in MakeRequest
return url_opener.urlopen(req, timeout=timeout)
File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/url_opener.py",
line 69, in urlopen
return opener.open(req, data, timeout)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib2.py",
line 404, in open
response = self._open(req, data)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib2.py",
line 422, in _open
'_open', req) File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib2.py",
line 382, in _call_chain
result = func(*args) File "/Users/rptrainor/google-cloud-sdk/lib/googlecloudsdk/core/url_opener.py",
line 54, in https_open
return self.do_open(build, req)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib2.py",
line 1181, in do_open
h.request(req.get_method(), req.get_selector(), req.data, headers) File
"/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py",
line 995, in request
self._send_request(method, url, body, headers)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py",
line 1029, in _send_request
self.endheaders(body)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py",
line 991, in endheaders
self._send_output(message_body)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py",
line 844, in _send_output
self.send(msg)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py",
line 806, in send
self.connect()
File "/Users/rptrainor/google-cloud-sdk/lib/third_party/httplib2/init.py",
line 1081, in connect
raise SSLHandshakeError(e)
httplib2.SSLHandshakeError: [Errno 1] _ssl.c:510: error:14090086:SSL >routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
{
"web":{
"client_id":"[[CLIENT_ID_IS_HERE]]",
"project_id":"[[PROJECT_ID_IS_HERE]]",
"auth_uri":"https://accounts.google.com/o/oauth2/auth",
"token_uri":"https://accounts.google.com/o/oauth2/token",
"auth_provider_x509_cert_url":"https://www.googleapis.com/oauth2/v1/certs",
"client_secret":"[[CLIENT_SECRET_IS_HERE]]"
}
}

Try updating Python to the last 2.7.x version. I could resolve the very same issue updating Python to 2.7.13.

One silly yet effective solution could be accessing these URL's via browser once and accepting their certificate.
As well check the time of your computer. If it is not appropriate i mean not in the current date. Server will not share the certificate.

Categories

Resources