I am new to VScode and want to run Python in it for my college project. I have seen that in VScode all the programmes are executed in Windows PowerShell Terminal(By default). But the problem is that it also shows the file address which is being executed which I don't want. So, please could you give a suggestion which software should be used in the terminal which only executes code and doesn't show any file address. And How can I change it?
VS code supports multiple shells. By default it's powershell (PS >) on windows
Click on "Select Default Profile" to change it (And restart VS code) or you can directly click on any of the available shells (shown in below pic).
About hiding the "file address" - you can always change the shell's corresponding settings file which it reads on load.
Ex: bash shell uses .bashrc settings file. And how to hide file path could be checked here for bash : Show only current directory name (not full path) on bash prompt
Similarly check how it's done for the shell you want
You can try the extension of Code Runner, it will be like this:
Otherwise, you can change the value of "console" in the launch.json file to the internalConsole, then run the python file in the debug mode(F5), it will be like this:
ctrl+shift+ is a Command Used to open terminal in VS code .. You can also Try Extension of python shell or powershell in VSCode ...
My goal is to schedule the execution of a simple python script in Linux with the at command.
Problem: My python script is not executed at the specified time. Nothing happens, no error messages.
I have the following simple helloworld file:
#!/usr/bin/python3
print("hello world")
To schedule the job I type:
at now + 1 min
I provide the file I want to execute:
./helloworld
Typing atq I see that the job was scheduled nicely.
But it just happens...nothing.
I work on Kali Linux
I have given execution permission to the root user for that file
I can run the helloworld file from the command line
the root user has permission to run at commands (not listed in /etc/at.deny)
I can schedule the job echo "hello world" > message.txt. That works fine.
What I am not sure about:
is there something wrong with the shebang line?
I have checked /usr/bin/: python3 is in there and is linked to python3.9.
at does not write to the terminal (which may not even exist when the command runs). Instead,
The user will be mailed standard error and standard output from his commands, if any. Mail will be sent using the command sendmail(8). If at is executed from a su(1) shell, the owner of the login shell will receive the mail.
So if your command only writes to standard output, you'll need to check the local mailbox for the output of the command, using mail or some other mail client.
Otherwise, you can have your command explicitly write to some other known file to look for later.
It is better to keep the extension .py for your script since it is python.
Your file should be executable
$ chmod +x ./helloworld
For your needs, you can just type the full path to your script when running at.
If you want to use helloworld command, the folder that contains this script should be in PATH environment variable. Otherwise, the system just doesn't know where to find it. If you do this, you don't need to type ./ before the command or any path at all.
Nice article about PATH https://opensource.com/article/17/6/set-path-linux
I remember that at some point I used to be able open up the python IDLE from the command line by simply typing "idle" return, which would pop up the python idle editor. I recently got a new machine and installed python, but have to open idle from the windows start menu.
When trying to run "idle" or "idle3" from the command line I get
C:\Users\SSims>idle3
'idle3' is not recognized as an internal or external command,
operable program or batch file.
Can anyone tell me how to get the command line "idle" command set up. Thanks for any help!
There are no step-by-step fixes that I have found online to answer this question, but many that answer specific portions of the question scattered around online. Hopefully, this will help others with the same question in the future, as I know there are many who could benefit from this answer.
If you have selected "Add Python X.x to Path Variables" upon installation then you should be able to run "python" from the command line to start the python editor. Similarly, this will allow you to do the same for IDLE.
First, hit your windows key and type "path" then enter to go to your system environment page in settings.
Next, click "Environment Variables then select "Path" under user variables
There should be a popup that contains a path that looks like this:
C:\Users\SSims\AppData\Local\Programs\Python\Python37-32\
Copy that address then click "new"
Paste that address, then at the end of it type "Lib\idlelib" so that your new variable now looks like:
C:\Users\SSims\AppData\Local\Programs\Python\Python37-32\Lib\idlelib
This should be the path to the folder in which the idle executable file resides.
Note: You can check that path to ensure it is right by pasting it into the windows start menu and it should redirect you to the folder. If it doesn't, you can paste the path to the python folder from earlier that was added automatically upon installation and search around in there until you find the idle executable, then add that folder to the Path variables to get it to work.
You should now be able to run the idle command from command prompt, hope this helps!!
Instead of IDLE use, python -m idlelib command
check the IDLE official document
I have really annoying problem, I cannot run a Python file just by double-clicking.
I have tried to set it to open the file with idle.bat but that only starts IDLE editor on double-click, it does not run the Python file.
What version of Python do you have installed?
You should write your own batch file to execute your python binary and your script.
For example, with a default Python 2.7 installation on Windows, this could be the entire contents of your script.
myscript.bat:
ECHO ON
REM A batch script to execute a Python script
SET PATH=%PATH%;C:\Python27
python yourscript.py
PAUSE
Save this file as "myscript.bat" (make sure it's not "myscript.bat.txt"), then double click it.
right click on the file->open with->choose default program->more options->select python.exe file and click on.
Right click the file, select open with. If you want to simply run the script, find python.exe and select it. If you want to debug with IDLE, find that executable and select it.
When I had both Py2 and Py3, and then removed the former, my script wouldn't run by double-clicking it either (but fine from console.) I realized my __pycache__ folder (same directory as the script) was the issue. Problem solved when deleted.
You can also start a Django app this way. Once the Django server starts it enters a "wait" kind of mode so a batch file only requires two lines:
ECHO ON
python manage.py runserver
Manage.py can be in any directory, just keep the full folder path in the command within the batch file:
ECHO ON
python C:\temp\manage.py runserver
Solution for Ubuntu users.
Right-click on the file, then select open with, then choose your python version, it shode be in
/bin folder, usually it's /bin/python3.exe
In Windows 10, using regedit:
Under HKEY_CLASSES_ROOT, create key: .py
Edit Default string value to be py_auto_file (or any other name you want to call it)
Under HKCR, create another key: py_auto_file (or any matching name that you have just picked)
Under this key, create nested sub-keys: shell --> open --> command.
Edit Default string value to "C:\path\to\your\python.exe" "%1"
I prefer using Notepad++ for developing,
How do I execute the files in Python through Notepad++?
First option: (Easiest, recommended)
Open Notepad++. On the menu go to: Run -> Run.. (F5). Type in:
C:\Python26\python.exe "$(FULL_CURRENT_PATH)"
Now, instead of pressing run, press save to create a shortcut for it.
Notes
If you have Python 3.1: type in Python31 instead of Python26
Add -i if you want the command line window to stay open after the script has finished
Second option
Use a batch script that runs the Python script and then create a shortcut to that from Notepad++.
As explained here: http://it-ride.blogspot.com/2009/08/notepad-and-python.html
Third option: (Not safe)
The code opens “HKEY_CURRENT_USER\Software\Python\PythonCore”, if the key exists it will get the path from the first child key of this key.
Check if this key exists, and if does not, you could try creating it.
#Ramiz Uddin's answer definitely deserves more visibility :
Open Notepad++
On the menu go to: Run → Run.. (F5)
Type in: cmd /K python "$(FULL_CURRENT_PATH)"
Here is what's worked for me:
Open notepad++ and press F5. You'll get a little popup box:
Type: C:\Python27\python.exe -i "$(FULL_CURRENT_PATH)" for Python 2.7.
and then Save As..., and pick your own key combo to start it each time you want to run something
I also wanted to run python files directly from Notepad++.
Most common option found online is using builtin option Run. Then you have two options:
Run python file in console (in Windows it is Command Prompt) with code something like this (links: ):
C:\Path\to\Python\python.exe "$(FULL_CURRENT_PATH)"
(If your console window immediately closes after running then you can add cmd /k to your code. Links: ) This works fine, and you can even run files in interactive mode by adding -i to your code (links: ).
Run python program in IDLE with code something like this (links: , in these links C:\Path\to\Python\Lib\idlelib\idle.py is used, but I am using C:\Path\to\Python\Lib\idlelib\idle.bat instead, because idle.bat sets the right current working directory automatically):
C:\Path\to\Python\Lib\idlelib\idle.bat "$(FULL_CURRENT_PATH)"
Actually, this doesn't run your program in IDLE Shell, but instead it opens your python file in IDLE Editor and then you need to click Run Module (or click F5) to run the program. So it opens your file in IDLE Editor and then you need run it from there, which defeats the purpose of running python files from Notepad++.
But, searching online, I found option which adds '-r' to your code (links: ):
C:\Path\to\Python\Lib\idlelib\idle.bat -r "$(FULL_CURRENT_PATH)"
This will run your python program in IDLE Shell and because it is in IDLE it is by default in interactive mode.
Problem with running your python files via builtin Run option is that
each time you run your python file, you open new console or IDLE window and lose all output from previous executions. This might not be important to some, but when I started to program in python, I used Python IDLE, so I got used to running python file multiple times in same IDLE Shell window. Also problem with running python programs from Notepad++ is that you need to manually save your file and then click Run (or press F5). To solve these problems (AFAIK*) you need to use Notepad++ Plugins. The best plugin for running python files from Notepad++ is
NppExec. (I also tried PyNPP and Python Script. PyNPP runs python files in console, it works, but you can do that without plugin via builtin Run option and Python Script is used for running scripts that interact with Notepad++ so you can't run your python files.) To run your python file with NppExec plugin you need to go to Plugins -> NppExec -> Execute and then type in something like this (links: ):
C:\Path\to\Python\python.exe "$(FULL_CURRENT_PATH)"
With NppExec you can also save your python file before run with npp_save command, set working directory with cd "$(CURRENT_DIRECTORY)" command or run python program in interactive mode with -i command. I found many links ( ) online that mention these options, but best use of NppExec to run python programs I found at NppExec's Manual which has chapter 4.6.4. Running Python & wxPython with this code:
npp_console - // disable any output to the Console
npp_save // save current file (a .py file is expected)
cd "$(CURRENT_DIRECTORY)" // use the current file's dir
set local #exit_cmd_silent = exit() // allows to exit Python automatically
set local PATH_0 = $(SYS.PATH) // current value of %PATH%
env_set PATH = $(SYS.PATH);C:\Python27 // use Python 2.7
npp_setfocus con // set the focus to the Console
npp_console + // enable output to the Console
python -i -u "$(FILE_NAME)" // run Python's program interactively
npp_console - // disable any output to the Console
env_set PATH = $(PATH_0) // restore the value of %PATH%
npp_console + // enable output to the Console
All you need to do is copy this code and change your python directory if you use some other python version (e.g.* I am using python 3.4 so my directory is C:\Python34). This code works perfectly, but there is one line I added to this code so I can run python program multiple times without loosing previous output:
npe_console m- a+
a+ is to enable the "append" mode which keeps the previous Console's text and does not clear it.
m- turns off console's internal messages (those are in green color)
The final code that I use in NppExec's Execute window is:
npp_console - // disable any output to the Console
npp_save // save current file (a .py file is expected)
cd "$(CURRENT_DIRECTORY)" // use the current file's dir
set local #exit_cmd_silent = exit() // allows to exit Python automatically
set local PATH_0 = $(SYS.PATH) // current value of %PATH%
env_set PATH = $(SYS.PATH);C:\Python34 // use Python 3.4
npp_setfocus con // set the focus to the Console
npe_console m- a+
npp_console + // enable output to the Console
python -i -u "$(FILE_NAME)" // run Python's program interactively
npp_console - // disable any output to the Console
env_set PATH = $(PATH_0) // restore the value of %PATH%
npp_console + // enable output to the Console
You can save your NppExec's code, and assign a shortcut key to this NppExec's script. (You need to open Advanced options of NppExec's plugin, select your script in the Associated script drop-down list, press the Add/Modify, restart Notepad++ , go to Notepad++'es Settings -> Shortcut Mapper -> Plugin commands, select your script, click Modify and assign a shortcut key. I wanted to put F5 as my shortcut key, to do that you need to change shortcut key for builtin option Run to something else first.) Links to chapters from NppExec's Manual that explain how to save you NppExec's code and assign a shortcut key: NppExec's "Execute...", NppExec's script.
P.S.*: With NppExec plugin you can add Highlight Filters (found in Console Output Filters...) that highlight certain lines. I use it to highlight error lines in red, to do that you need to add Highlight masks: *File "%FILE%", line %LINE%, in <*> and Traceback (most recent call last): like this.
First install Python from https://www.python.org/downloads/
Run the installer
** IMPORTANT **
Be sure you check both :
Install launcher for all users
Add Python 3.6 to path
Click install now and finish the installation.
Open notepad++ and install plugin PyNPP from Plugin Manager. I'm using N++ 6.9.2
Save a new file as new.py
Type in N++
import sys
print("Hello from Python!")
print("Your Python version is: " + sys.version)
Press Alt+Shift+F5
Simple as that.
On the menu go to: "Run" --> "Run..." (or just press F5).
For Python 2 type in:
py -2 -i "$(FULL_CURRENT_PATH)"
For Python 3 type in:
py -3 -i "$(FULL_CURRENT_PATH)"
References:
To understand the py command better:
py -h
Another helpful link to understand the py command: How do I run python 2 and 3 in windows 7?
Thanks to Reshure for his answer that got me on the right track to figure this out.
All the answers for the Run->Run menu option go with the "/K" switch of cmd, so the terminal stays open, or "-i" for python.exe so python forces interactive mode - both to preserve the output for you to observe.
Yet in cmd /k you have to type exit to close it, in the python -i - quit(). If that is too much typing for your liking (for me it sure is :), the Run command to use is
cmd /k C:\Python27\python.exe "$(FULL_CURRENT_PATH)" & pause & exit
C:\Python27\python.exe - obviously the full path to your python install (or just python if you want to go with the first executable in your user's path).
& is unconditional execution of the next command in Windows - unconditional as it runs regardless of the RC of the previous command (&& is "and" - run only if the previous completed successfully, || - is "or").
pause - prints "Press any key to continue . . ." and waits for any key (that output can be suppressed if need).
exit - well, types the exit for you :)
So at the end, cmd runs python.exe which executes the current file and keeps the window opened, pause waits for you to press any key, and exit finally close the window once you press that any key.
None of the previously proposed solutions worked for me. Slight modification needed.
After hitting F5 in Notepad++, type:
cmd /k "C:\Python27\python.exe $(FULL_CURRENT_PATH)"
The command prompt stays open so you can see the output of your script.
I use the NPP_Exec plugin (Found in the plugins manager). Once that is installed, open the console window (ctrl+~) and type:
cmd
This will launch command prompt. Then type:
C:\Program Files\Notepad++> **python "$(FULL_CURRENT_PATH)"**
to execute the current file you are working with.
I wish people here would post steps instead of just overall concepts. I eventually got the cmd /k version to work.
The step-by-step instructions are:
In NPP, click on the menu item: Run
In the submenu, click on: Run
In the Run... dialog box, in the field The Program to Run, delete any existing text and type in: cmd /K "$(FULL_CURRENT_PATH)"
The /K is optional, it keeps open the window created when the script runs, if you want that.
Hit the Save... button.
The Shortcut dialogue box opens; fill it out if you want a keyboard shortcut (there's a note saying "This will disable the accelerator" whatever that is, so maybe you don't want to use the keyboard shortcut, though it probably doesn't hurt to assign one when you don't need an accelerator).
Somewhere I think you have to tell NPP where the Python.exe file is (e.g., for me: C:\Python33\python.exe). I don't know where or how you do this, but in trying various things here, I was able to do that--I don't recall which attempt did the trick.
My problem was, as it was mentioned by copeland3300, that my script is running from notepad++ folder, so it was impossible to locate other project files, such as database file, modules etc. I solved the problem using standard notepad++ "Run" command (F5) and typing in:
cmd /k "cd /d "$(CURRENT_DIRECTORY)" & python "$(FULL_CURRENT_PATH)""
Python WAS in my PATH. Cmd window stayed open after script finished.
No answer here, or plugin i found provided what i wanted. A minimalist method to launch my python code i wrote on Notepad++ with the press of a shortcut, with preferably no plugins.
I have Python 3.6 (64-bit), for Windows 8.1 x86_64 and Notepad++ 32bit. After you write your Python script in Notepad++ and save it, Hit F5 for Run. Then write:
"C:\Path\to\Python\python.exe" -i "$(FULL_CURRENT_PATH)"
and hit the Run button. The i flag forces the terminal to stay still after code execution has terminated, for you to inspect it. This command will launch the script in a cmd terminal and the terminal will still lie there, until you close it by typing exit().
You can save this to a shortcut for convenience (mine is CTRL + SHIFT + P).
I would like to avoid using full python directory path in the Notepad++ macro. I tried other solutions given in this page, they failed.
The one working on my PC is:
In Notepad++, press F5.
Copy/paste this:
cmd /k cd /d "$(CURRENT_DIRECTORY)" && py -3 -i "$(FULL_CURRENT_PATH)"
Enter.
There is one issue that I didn't see resolved in the above solutions. Python sets the current working directory to wherever you start the interpreter from. If you need the current working directory to be the same directory as where you saved the file on, then you could hit F5 and type this:
cmd /K cd "$(CURRENT_DIRECTORY)"&C:\Users\username\Python36-32\python.exe -i "$(FULL_CURRENT_PATH)"
Except you would replace C:\Users\username\Python36-32\python.exe with whatever the path to the python interpreter is on your machine.
Basically you're starting up command line, changing the directory to the directory containing the .py file you're trying to run, and then running it. You can string together as many command line commands as you like with the '&' symbol.
Extending Reshure's answer
Open Run → Run... from the menubar in Notepad++ (shortcut: F5)
In the given space, enter:
"$(FULL_CURRENT_PATH)" -1
Click Run
ta da!
I started using Notepad++ for Python very recently and I found this method very easy. Once you are ready to run the code,right-click on the tab of your code in Notepad++ window and select "Open Containing Folder in cmd". This will open the Command Prompt into the folder where the current program is stored. All you need to do now is to execute:
python
This was done on Notepad++ (Build 10 Jan 2015).
I can't add the screenshots, so here's a blog post with the screenshots - http://coder-decoder.blogspot.in/2015/03/using-notepad-in-windows-to-edit-and.html
In Notepad++, go to Run → Run..., select the path and idle.py file of your Python installation:
C:\Python27\Lib\idlelib\idle.py
add a space and this:
"$(FULL_CURRENT_PATH)"
and here you are!
Video demostration:
https://www.youtube.com/watch?v=sJipYE1JT38
In case someone is interested in passing arguments to cmd.exe and running the python script in a Virtual Environment, these are the steps I used:
On the Notepad++ -> Run -> Run , I enter the following:
cmd /C cd $(CURRENT_DIRECTORY) && "PATH_to_.bat_file" $(FULL_CURRENT_PATH)
Here I cd into the directory in which the .py file exists, so that it enables accessing any other relevant files which are in the directory of the .py code.
And on the .bat file I have:
#ECHO off
set File_Path=%1
call activate Venv
python %File_Path%
pause
You can run your script via cmd and be in script-directory:
cmd /k cd /d $(CURRENT_DIRECTORY) && python $(FULL_CURRENT_PATH)
I usually prefer running my python scripts on python native IDLE interactive shell rather than from command prompt or something like that. I've tried it, and it works for me. Just open "Run > Run...", then paste the code below
python -m idlelib.idle -r "$(FULL_CURRENT_PATH)"
After that, you can save it with your hotkey.
You must ensure your desired python is added and registered in your environment variables.
In addition to the many other answers about using a system-wide installation of a Python interpreter, there is also a Python plugin for Notepad++. I've used it many times, and it works quite well. You can even assign shortcut keys to run specific Python scripts.
It is open-source and gratis (free of charge).
The source code and plugin are located here:
https://github.com/bruderstein/PythonScript/