I'm trying to create required libraries in a package I'm distributing. It requires both the SciPy and NumPy libraries.
While developing, I installed both using
apt-get install scipy
which installed SciPy 0.9.0 and NumPy 1.5.1, and it worked fine.
I would like to do the same using pip install - in order to be able to specify dependencies in a setup.py of my own package.
The problem is, when I try:
pip install 'numpy==1.5.1'
it works fine.
But then
pip install 'scipy==0.9.0'
fails miserably, with
raise self.notfounderror(self.notfounderror.__doc__)
numpy.distutils.system_info.BlasNotFoundError:
Blas (http://www.netlib.org/blas/) libraries not found.
Directories to search for the libraries can be specified in the
numpy/distutils/site.cfg file (section [blas]) or by setting
the BLAS environment variable.
How do I get it to work?
This worked for me on Ubuntu 14.04:
sudo apt-get install libblas-dev liblapack-dev libatlas-base-dev gfortran
pip install scipy
you need the libblas and liblapack dev packages if you are using Ubuntu.
aptitude install libblas-dev liblapack-dev
pip install scipy
I am assuming Linux experience in my answer; I found that there are three prerequisites to getting pip install scipy to proceed nicely.
Go here: Installing SciPY
Follow the instructions to download, build and export the env variable for BLAS and then LAPACK. Be careful to not just blindly cut'n'paste the shell commands - there will be a few lines you need to select depending on your architecture, etc., and you'll need to fix/add the correct directories that it incorrectly assumes as well.
The third thing you may need is to yum install numpy-f2py or the equivalent.
Oh, yes and lastly, you may need to yum install gcc-gfortran as the libraries above are Fortran source.
Since the previous instructions for installing with yum are broken here are the updated instructions for installing on something like fedora. I've tested this on "Amazon Linux AMI 2016.03"
sudo yum install atlas-devel lapack-devel blas-devel libgfortran
pip install scipy
I was working on a project that depended on numpy and scipy. In a clean installation of Fedora 23, using a python virtual environment for Python 3.4 (also worked for Python 2.7), and with the following in my setup.py (in the setup() method)
setup_requires=[
'numpy',
],
install_requires=[
'numpy',
'scipy',
],
I found I had to run the following to get pip install -e . to work:
pip install --upgrade pip
and
sudo dnf install atlas-devel gcc-{c++,gfortran} subversion redhat-rpm-config
The redhat-rpm-config is for scipy's use of redhat-hardened-cc1 as opposed to the regular cc1
On windows python 3.5, I managed to install scipy by using conda not pip:
conda install scipy
What operating system is this? The answer might depend on the OS involved. However, it looks like you need to find this BLAS library and install it. It doesn't seem to be in PIP (you'll have to do it by hand thus), but if you install it, it ought let you progress your SciPy install.
in my case, upgrading pip did the trick. Also, I've installed scipy with -U parameter (upgrade all packages to the last available version)
Related
I'm trying to install NumPy, so that I can use it in Python plug-ins for GIMP. Every time I try, it installs into the external Python, and the Python inside GIMP can't find it. How do I install NumPy, so that GIMP can find it?
If you are using the flatpak version, you can install numpy as a "user" package using your "general" pip installer (and not the apt kind) and it will be taken in account by Gimp's built-in runtime (just tested, it works). You may have to force a specific version to get a V2-compatible numpy:
pip install --user -I numpy==1.11.0
I cannot tell you how to install pip for your V2 python on 20.04. On my 19.04 apt install python-pip did the trick but on 20.04 it could be apt install python2-pip or you would have to install it by hand.
I used sudo apt-get install python-scipy to install scipy. This put all the files in /usr/lib/python2.7.dist-packages/scipy. My best guess is it chose that location because python 2.7 was the default version of python. I also want to use scipy with python 3 however. Does the package need to be rebuilt for python 3 or can I just point python 3 to the existing version?
I've tried using pip to install two parallel version, but I can't get the dependency libblas3 installed for my system.
What's the best way to do this?
I'm on Debian Jessie.
To install scipy for python3.x the on a debian-based distribution:
sudo apt-get install python3-scipy
This corresponds to the python2.x equivalent:
sudo apt-get install python-scipy
On a more platform-independent note, pip is the more standard way of installing python packages:
pip install --user scipy #pip install using default python version
To make sure you are using the right pip version you can always be more explicit:
pip2 install --user scipy # install using python2
pip3 install --user scipy # install using python3
Also, I believe anaconda or the more lightweight miniconda were intended to make installation of python packages with complex dependencies more easy, plus it allows for using an environment, making it easier to have several configurations with non-compatible versions etc. This would create+use a python binary different from the one on your system though.
One would then install scipy using the command conda:
conda install scipy
If installing scipy for a specific version you would create an environment with that python version:
conda create -n my_environment_name python=3 scipy
One could also use pip inside a conda environment alongside conda python packages, but I would make sure that you are using pip installed using conda to avoid conflicts. An added benefit when installing conda for a user, is that you don't have to add the --user flag when installing with pip.
If you can't find python3-scipy using apt-get you can use pip to install it for python3, you just have to make sure you use pip3 (if you don't have it apt install python3-pip
pip3 install --user scipy
You may want to try with pip3 install scipy
I'm trying making work scipy in my virtualenv but the only way to install it is with apt-get and there is not a way to install it for my virtual env. Doesn't exits a package for pil, so i tried copy the folder
/usr/lib/python2.7/dist-packages/scipy to /home/envs/conbert/lib/python2.7/site-packages but is not working. Is possible make work scipy for a specific environment?
You can install scipy using pip in your virtualenv with
pip install scipy
pip should install all Python dependencies necessary before installing scipy.
Note that you may have to install some extra non-Python dependencies using apt-get. These will be flagged as errors during the pip installation if they're necessary. Possible dependencies may include BLAS, LAPACK, ATLAS, various compilers, etc. Whether these are already installed will depend on what you've already done with your system.
I've created virtualenv for Python 2.7.4 on Ubuntu 13.04. I've installed python-dev.
I have the error when installing numpy in the virtualenv.
Maybe, you have any ideas to fix?
The problem is SystemError: Cannot compile 'Python.h'. Perhaps you need to install python-dev|python-devel.
so do the following in order to obtain 'Python.h'
make sure apt-get and gcc are up to date
sudo apt-get update
sudo apt-get upgrade gcc
then install the python2.7-dev
sudo apt-get install python2.7-dev
and I see that you have most probably already done the above things.
pip will eventually spit out another error for not being able to write into /user/bin/blahBlah/dist-packages/ or something like that because it couldn't figure out that it was supposed to install your desiredPackage (e.g. numpy) within the active env (the env created by virtualenv which you might have even changed directory to while doing all this)
so do this:
pip -E /some/path/env install desiredPackage
that should get the job done... hopefully :)
---Edit---
From PIP Version 1.1 onward, the command pip -E doesn't work. The following is an excerpt from the release notes of version 1.1 (https://pip.pypa.io/en/latest/news.html)
Removed -E/--environment option and PIP_RESPECT_VIRTUALENV; both use a restart-in-venv mechanism that's broken, and neither one is useful since every virtualenv now has pip inside it. Replace pip -E path/to/venv install Foo with virtualenv path/to/venv && path/to/venv/pip install Foo
If you're on Python3 you'll need to do sudo apt-get install python3-dev. Took me a little while to figure it out.
If you're hitting this issue even though you've installed all OS dependencies (python-devel, fortran compiler, etc), the issue might be instead related to the following bug:
"numpy installation thru install_requires directive issue..."
Work around is to manually install numpy in your (virtual) environment before running setup.py to install whatever you want to install that depends on numpy.
eg, pip install numpy then python ./setup.py install
This answer is for those of us that compiled python from source or installed it to a non standard directory. In my case, python2.7 was installed to /usr/local and the include files were installed to /usr/local/include/python2.7
C_INCLUDE_PATH=/usr/local/include/python2.7:$C_INCLUDE_PATH pip install numpy
I recently had the same problem. I run Debian Jessie and tried to install numpy from a Python 2.7.9 virtualenv. I got the same error -- numpy complaining that Python.h is missing while python2.7-dev and gcc are already installed.
File "numpy/core/setup.py", line 42, in check_types
],
File "numpy/core/setup.py", line 293, in check_types
SystemError: Cannot compile 'Python.h'. Perhaps you need to install python-dev|python-devel.
I'm running pip 1.5.6 and it doesn't appear to have command line option '-E'
$ pip -V
pip 1.5.6 from /home/alex/.virtualenvs/myenv/local/lib/python2.7/site- packages (python 2.7)
Upgrading pip to the latest verson 7.0.3 solves the problem
$ pip install --upgrade pip
Downloading/unpacking pip from https://pypi.python.org/packages/py2.py3/p/pip/pip-7.0.3-py2.py3-none-any.whl#md5=6950e1d775fea7ea50af690f72589dbd
Downloading pip-7.0.3-py2.py3-none-any.whl (1.1MB): 1.1MB downloaded
Installing collected packages: pip
Found existing installation: pip 1.5.6
Uninstalling pip:
Successfully uninstalled pip
Successfully installed pip
Cleaning up...
Now it is possible to install numpy
$ pip install numpy
Collecting numpy
Downloading numpy-1.9.2.tar.gz (4.0MB)
100% |████████████████████████████████| 4.0MB 61kB/s
Installing collected packages: numpy
Running setup.py install for numpy
Successfully installed numpy-1.9.2
This is probably because you do not have the python-dev package installed. You can install it like this:
sudo apt-get install python-dev
You can also install it via the Software Center:
#samkhan13 solution didn't work for me as pip said it doesn't have the -E option.
I was still getting the same error, but what worked for me was to install matplotlib, which installed numpy.
It is possible to install NumPy with pip using pip install numpy.
Is there a similar possibility with SciPy? (Doing pip install scipy does not work.)
Update
The package SciPy is now available to be installed with pip!
Prerequisite:
sudo apt-get install build-essential gfortran libatlas-base-dev python-pip python-dev
sudo pip install --upgrade pip
Actual packages:
sudo pip install numpy
sudo pip install scipy
Optional packages:
sudo pip install matplotlib OR sudo apt-get install python-matplotlib
sudo pip install -U scikit-learn
sudo pip install pandas
src
An attempt to easy_install indicates a problem with their listing in the Python Package Index, which pip searches.
easy_install scipy
Searching for scipy
Reading http://pypi.python.org/simple/scipy/
Reading http://www.scipy.org
Reading http://sourceforge.net/project/showfiles.php?group_id=27747&package_id=19531
Reading http://new.scipy.org/Wiki/Download
All is not lost, however; pip can install from Subversion (SVN), Git, Mercurial, and Bazaar repositories. SciPy uses SVN:
pip install svn+http://svn.scipy.org/svn/scipy/trunk/#egg=scipy
Update (12-2012):
pip install git+https://github.com/scipy/scipy.git
Since NumPy is a dependency, it should be installed as well.
In Ubuntu 10.04 (Lucid), I could successfully pip install scipy (within a virtualenv) after installing some of its dependencies, in particular:
$ sudo apt-get install libamd2.2.0 libblas3gf libc6 libgcc1 libgfortran3 liblapack3gf libumfpack5.4.0 libstdc++6 build-essential gfortran libatlas-sse2-dev python-all-dev
To install scipy on windows follow these instructions:-
Step-1 : Press this link http://www.lfd.uci.edu/~gohlke/pythonlibs/#scipy to download a scipy .whl file (e.g. scipy-0.17.0-cp34-none-win_amd64.whl).
Step-2: Go to the directory where that download file is there from the command prompt (cd folder-name ).
Step-3: Run this command:
pip install scipy-0.17.0-cp27-none-win_amd64.whl
I tried all the above and nothing worked for me. This solved all my problems:
pip install -U numpy
pip install -U scipy
Note that the -U option to pip install requests that the package be upgraded. Without it, if the package is already installed pip will inform you of this and exit without doing anything.
If I first install BLAS, LAPACK and GCC Fortran as system packages (I'm using Arch Linux), I can get SciPy installed with:
pip install scipy
On Fedora, this works:
sudo yum install -y python-pip
sudo yum install -y lapack lapack-devel blas blas-devel
sudo yum install -y blas-static lapack-static
sudo pip install numpy
sudo pip install scipy
If you get any public key errors while downloading, add --nogpgcheck as parameter to yum, for example:
yum --nogpgcheck install blas-devel
On Fedora 23 onwards, use dnf instead of yum.
For the Arch Linux users:
pip install --user scipy prerequisites the following Arch packages to be installed:
gcc-fortran
blas
lapack
Addon for Ubuntu (Ubuntu 10.04 LTS (Lucid Lynx)):
The repository moved, but a
pip install -e git+http://github.com/scipy/scipy/#egg=scipy
failed for me... With the following steps, it finally worked out (as root in a virtual environment, where python3 is a link to Python 3.2.2):
install the Ubuntu dependencies (see elaichi), clone NumPy and SciPy:
git clone git://github.com/scipy/scipy.git scipy
git clone git://github.com/numpy/numpy.git numpy
Build NumPy (within the numpy folder):
python3 setup.py build --fcompiler=gnu95
Install SciPy (within the scipy folder):
python3 setup.py install
In my case, it wasn't working until I also installed the following package : libatlas-base-dev, gfortran
sudo apt-get install libatlas-base-dev gfortran
Then run pip install scipy
install python-3.4.4
scipy-0.15.1-win32-superpack-python3.4
apply the following commend doc
py -m pip install --upgrade pip
py -m pip install numpy
py -m pip install matplotlib
py -m pip install scipy
py -m pip install scikit-learn
The answer is yes, there is.
First you can easily install numpy use commands:
pip install numpy
Then you should install mkl, which is required by Scipy, and you can download it here
After download the file_name.whl you install it
C:\Users\****\Desktop\a> pip install mkl_service-1.1.2-cp35-cp35m-win32.whl
Processing c:\users\****\desktop\a\mkl_service-1.1.2-cp35-cp35m-win32.whl
Installing collected packages: mkl-service
Successfully installed mkl-service-1.1.2
Then at the same website you can download scipy-0.18.1-cp35-cp35m-win32.whl
Note:You should download the file_name.whl according to you python version, if you python version is 32bit python3.5 you should download this one, and the "win32" is about your python version, not your operating system version.
Then install file_name.whl like this:
C:\Users\****\Desktop\a>pip install scipy-0.18.1-cp35-cp35m-win32.whl
Processing c:\users\****\desktop\a\scipy-0.18.1-cp35-cp35m-win32.whl
Installing collected packages: scipy
Successfully installed scipy-0.18.1
Then there is only one more thing to do: comment out a specfic line or there will be error messages when you imput command "import scipy".
So comment out this line
from numpy._distributor_init import NUMPY_MKL # requires numpy+mkl
in this file: your_own_path\lib\site-packages\scipy__init__.py
Then you can use SciPy :)
Here tells you more about the last step.
Here is a similar anwser to a similar question.
Besides all of these answers,
If you install python of 32bit on your 64bit machine, you have to download scipy of 32-bit irrespective of your machine.
http://www.lfd.uci.edu/~gohlke/pythonlibs/
In the above URL you can download the packages and command is: pip install
For gentoo, it's in the main repository:
emerge --ask scipy
You can also use this in windows with python 3.6 python -m pip install scipy