I would like to create a dictionary with multiple keys and values. At this point I am not sure that I am putting my question correctly. But here is an example of what I want to create :
patDct = {
'mkey1':{'key1':'val_a1', 'key2':'val_a2', 'key3':'val_a3'},
'mkey2':{'key1':'val_b1', 'key2':'val_b2', 'key3':'val_b3'},
....
}
I have two dictionaries and I am pulling information for 'mkey*', and 'val*' from them. 'key*' are strings.
I have a piece of code to create the dictionary without the 'mkey*', but that only prints out the last set of values. Following is what I have now.
"storedct" and "datadct" are two given dictionaries.
Here I would like 'mkey*' to get the value of "item".
patDct = dict()
for item in storedct :
for pattern in datadct :
if pattern in item :
patDct['key1'] = datadct[pattern]["dpath"]
patDct['key2'] = datadct[pattern]["mask"]
patDct['key3'] = storedct[item]
Thanks for any suggestion.
patDct = dict()
n=1
for item in storedct :
patDct["mkey%s"%n] = {}
p = patDct["mkey%s"%n]
for pattern in datadct :
if pattern in item :
p['key1'] = datadct[pattern]["dpath"]
p['key2'] = datadct[pattern]["mask"]
p['key3'] = storedct[item]
n +=1
print patDct
From what I understand from your code, I guess that:
patDct = dict()
i = 0
for item in storedct :
for pattern in datadct :
if pattern in item :
i = i + 1
new_item = {}
new_item['key1'] = datadct[pattern]["dpath"]
new_item['key2'] = datadct[pattern]["mask"]
new_item['key3'] = storedct[item]
# I used a counter to generate the `mkey` values,
# not sure you want it that way
patDct['mkey{0}'.format(i)] = new_item
should not be far from your needs...
Related
In my LIST(not dictionary) I have these strings:
"K:60",
"M:37",
"M_4:47",
"M_5:89",
"M_6:91",
"N:15",
"O:24",
"P:50",
"Q:50",
"Q_7:89"
in output I need to have
"K:60",
"M_6:91",
"N:15",
"O:24",
"P:50",
"Q_7:89"
What is the possible decision?
Or even maybe, how to take tag with the maximum among strings with the same tag.
Use re.split and list comprehension as shown below. Use the fact that when the dictionary dct is created, only the last value is kept for each repeated key.
import re
lst = [
"K:60",
"M:37",
"M_4:47",
"M_5:89",
"M_6:91",
"N:15",
"O:24",
"P:50",
"Q:50",
"Q_7:89"
]
dct = dict([ (re.split(r'[:_]', s)[0], s) for s in lst])
lst_uniq = list(dct.values())
print(lst_uniq)
# ['K:60', 'M_6:91', 'N:15', 'O:24', 'P:50', 'Q_7:89']
Probably far from the cleanest but here is a method quite easy to understand.
l = ["K:60", "M:37", "M_4:47", "M_5:89", "M_6:91", "N:15", "O:24", "P:50", "Q:50", "Q_7:89"]
reponse = []
val = []
complete_val = []
for x in l:
if x[0] not in reponse:
reponse.append(x[0])
complete_val.append(x.split(':')[0])
val.append(int(x.split(':')[1]))
elif int(x.split(':')[1]) > val[reponse.index(x[0])]:
val[reponse.index(x[0])] = int(x.split(':')[1])
for x in range(len(complete_val)):
print(str(complete_val[x]) + ":" + str(val[x]))
K:60
M:91
N:15
O:24
P:50
Q:89
I do not see any straight-forward technique. Other than iterating on entire thing and computing yourself, I do not see if any built-in can be used. I have written this where you do not require your values to be sorted in your input.
But I like the answer posted by Timur Shtatland, you can make us of that if your values are already sorted in input.
intermediate = {}
for item in a:
key, val = item.split(':')
key = key.split('_')[0]
val = int(val)
if intermediate.get(key, (float('-inf'), None))[0] < val:
intermediate[key] = (val, item)
ans = [x[1] for x in intermediate.values()]
print(ans)
which gives:
['K:60', 'M_6:91', 'N:15', 'O:24', 'P:50', 'Q_7:89']
How do I code a function in python which can:
iterate through a list of word strings which may contain duplicate words and referencing to a dictionary,
find the word with the highest absolute sum, and
output it along with the corresponding absolute value.
The function also has to ignore words which are not in the dictionary.
For example,
Assume the function is called H_abs_W().
Given the following list and dict:
list_1 = ['apples','oranges','pears','apples']
Dict_1 = {'apples':5.23,'pears':-7.62}
Then calling the function as:
H_abs_W(list_1,Dict_1)
Should give the output:
'apples',10.46
EDIT:
I managed to do it in the end with the code below. Looking over the answers, turns out I could have done it in a shorter fashion, lol.
def H_abs_W(list_1,Dict_1):
freqW = {}
for char in list_1:
if char in freqW:
freqW[char] += 1
else:
freqW[char] = 1
ASum_W = 0
i_word = ''
for a,b in freqW.items():
x = 0
d = Dict_1.get(a,0)
x = abs(float(b)*float(d))
if x > ASum_W:
ASum_W = x
i_word = a
return(i_word,ASum_W)
list_1 = ['apples','oranges','pears','apples']
Dict_1 = {'apples':5.23,'pears':-7.62}
d = {k:0 for k in list_1}
for x in list_1:
if x in Dict_1.keys():
d[x]+=Dict_1[x]
m = max(Dict_1, key=Dict_1.get)
print(m,Dict_1[m])
try this,
key, value = sorted(Dict_1.items(), key = lambda x : x[1], reverse=True)[0]
print(f"{key}, {list_1.count(key) * value}")
# apples, 10.46
you can use Counter to calculate the frequency(number of occurrences) of each item in the list.
max(counter.values()) will give us the count of maximum occurring element
max(counter, key=counter.get) will give the which item in the list is
associated with that highest count.
========================================================================
from collections import Counter
def H_abs_W(list_1, Dict_1):
counter = Counter(list_1)
count = max(counter.values())
item = max(counter, key=counter.get)
return item, abs(count * Dict_1.get(item))
I am new to Python and can't quite figure out a solution to my Problem. I would like to split a list into two lists, based on what the list item starts with. My list looks like this, each line represents an item (yes this is not the correct list notation, but for a better overview i'll leave it like this) :
***
**
.param
+foo = bar
+foofoo = barbar
+foofoofoo = barbarbar
.model
+spam = eggs
+spamspam = eggseggs
+spamspamspam = eggseggseggs
So I want a list that contains all lines starting with a '+' between .param and .model and another list that contains all lines starting with a '+' after model until the end.
I have looked at enumerate() and split(), but since I have a list and not a string and am not trying to match whole items in the list, I'm not sure how to implement them.
What I have is this:
paramList = []
for line in newContent:
while line.startswith('+'):
paramList.append(line)
if line.startswith('.'):
break
This is just my try to create the first list. The Problem is, the code reads the second block of '+'s as well because break just Exits the while Loop, not the for Loop.
I hope you can understand my question and thanks in advance for any pointers!
What you want is really a simple task that can be accomplish using list slices and list comprehension:
data = ['**','***','.param','+foo = bar','+foofoo = barbar','+foofoofoo = barbarbar',
'.model','+spam = eggs','+spamspam = eggseggs','+spamspamspam = eggseggseggs']
# First get the interesting positions.
param_tag_pos = data.index('.param')
model_tag_pos = data.index('.model')
# Get all elements between tags.
params = [param for param in data[param_tag_pos + 1: model_tag_pos] if param.startswith('+')]
models = [model for model in data[model_tag_pos + 1: -1] if model.startswith('+')]
print(params)
print(models)
Output
>>> ['+foo = bar', '+foofoo = barbar', '+foofoofoo = barbarbar']
>>> ['+spam = eggs', '+spamspam = eggseggs']
Answer to comment:
Suppose you have a list containing numbers from 0 up to 5.
l = [0, 1, 2, 3, 4, 5]
Then using list slices you can select a subset of l:
another = l[2:5] # another is [2, 3, 4]
That what we are doing here:
data[param_tag_pos + 1: model_tag_pos]
And for your last question: ...how does python know param are the lines in data it should iterate over and what exactly does the first paramin param for paramdo?
Python doesn't know, You have to tell him.
First param is a variable name I'm using here, it cuold be x, list_items, whatever you want.
and I will translate the line of code to plain english for you:
# Pythonian
params = [param for param in data[param_tag_pos + 1: model_tag_pos] if param.startswith('+')]
# English
params is a list of "things", for each "thing" we can see in the list `data`
from position `param_tag_pos + 1` to position `model_tag_pos`, just if that "thing" starts with the character '+'.
data = {}
for line in newContent:
if line.startswith('.'):
cur_dict = {}
data[line[1:]] = cur_dict
elif line.startswith('+'):
key, value = line[1:].split(' = ', 1)
cur_dict[key] = value
This creates a dict of dicts:
{'model': {'spam': 'eggs',
'spamspam': 'eggseggs',
'spamspamspam': 'eggseggseggs'},
'param': {'foo': 'bar',
'foofoo': 'barbar',
'foofoofoo': 'barbarbar'}}
I am new to Python
Whoops. Don't bother with my answer then.
I want a list that contains all lines starting with a '+' between
.param and .model and another list that contains all lines starting
with a '+' after model until the end.
import itertools as it
import pprint
data = [
'***',
'**',
'.param',
'+foo = bar',
'+foofoo = barbar',
'+foofoofoo = barbarbar',
'.model',
'+spam = eggs',
'+spamspam = eggseggs',
'+spamspamspam = eggseggseggs',
]
results = [
list(group) for key, group in it.groupby(data, lambda s: s.startswith('+'))
if key
]
pprint.pprint(results)
print '-' * 20
print results[0]
print '-' * 20
pprint.pprint(results[1])
--output:--
[['+foo = bar', '+foofoo = barbar', '+foofoofoo = barbarbar'],
['+spam = eggs', '+spamspam = eggseggs', '+spamspamspam = eggseggseggs']]
--------------------
['+foo = bar', '+foofoo = barbar', '+foofoofoo = barbarbar']
--------------------
['+spam = eggs', '+spamspam = eggseggs', '+spamspamspam = eggseggseggs']
This thing here:
it.groupby(data, lambda x: x.startswith('+')
...tells python to create groups from the strings according to their first character. If the first character is a '+', then the string gets put into a True group. If the first character is not a '+', then the string gets put into a False group. However, there are more than two groups because consecutive False strings will form a group, and consecutive True strings will form a group.
Based on your data, the first three strings:
***
**
.param
will create one False group. Then, the next strings:
+foo = bar
+foofoo = barbar
+foofoofoo = barbarbar
will create one True group. Then the next string:
'.model'
will create another False group. Then the next strings:
'+spam = eggs'
'+spamspam = eggseggs'
'+spamspamspam = eggseggseggs'
will create another True group. The result will be something like:
{
False: [strs here],
True: [strs here],
False: [strs here],
True: [strs here]
}
Then it's just a matter of picking out each True group: if key, and then converting the corresponding group to a list: list(group).
Response to comment:
where exactly does python go through data, like how does it know s is
the data it's iterating over?
groupby() works like do_stuff() below:
def do_stuff(items, func):
for item in items:
print func(item)
#Create the arguments for do_stuff():
data = [1, 2, 3]
def my_func(x):
return x + 100
#Call do_stuff() with the proper argument types:
do_stuff(data, my_func) #Just like when calling groupby(), you provide some data
#and a function that you want applied to each item in data
--output:--
101
102
103
Which can also be written like this:
do_stuff(data, lambda x: x + 100)
lambda creates an anonymous function, which is convenient for simple functions which you don't need to refer to by name.
This list comprehension:
[
list(group)
for key, group in it.groupby(data, lambda s: s.startswith('+'))
if key
]
is equivalent to this:
results = []
for key, group in it.groupby(data, lambda s: s.startswith('+') ):
if key:
results.append(list(group))
It's clearer to explicitly write a for loop, however list comprehensions execute much faster. Here is some detail:
[
list(group) #The item you want to be in the results list for the current iteration of the loop here:
for key, group in it.groupby(data, lambda s: s.startswith('+')) #A for loop
if key #Only include the item for the current loop iteration in the results list if key is True
]
I would suggest doing things step by step.
1) Grab every word from the array separately.
2) Grab the first letter of the word.
3) Look if that is a '+' or '.'
Example code:
import re
class Dark():
def __init__(self):
# Array
x = ['+Hello', '.World', '+Hobbits', '+Dwarves', '.Orcs']
xPlus = []
xDot = []
# Values
i = 0
# Look through every word in the array one by one.
while (i != len(x)):
# Grab every word (s), and convert to string (y).
s = x[i:i+1]
y = '\n'.join(s)
# Print word
print(y)
# Grab the first letter.
letter = y[:1]
if (letter == '+'):
xPlus.append(y)
elif (letter == '.'):
xDot.append(y)
else:
pass
# Add +1
i = i + 1
# Print lists
print(xPlus)
print(xDot)
#Run class
Dark()
I have a list containing strings as ['Country-Points'].
For example:
lst = ['Albania-10', 'Albania-5', 'Andorra-0', 'Andorra-4', 'Andorra-8', ...other countries...]
I want to calculate the average for each country without creating a new list. So the output would be (in the case above):
lst = ['Albania-7.5', 'Andorra-4.25', ...other countries...]
Would realy appreciate if anyone can help me with this.
EDIT:
this is what I've got so far. So, "data" is actually a dictionary, where the keys are countries and the values are list of other countries points' to this country (the one as Key). Again, I'm new at Python so I don't realy know all the built-in functions.
for key in self.data:
lst = []
index = 0
score = 0
cnt = 0
s = str(self.data[key][0]).split("-")[0]
for i in range(len(self.data[key])):
if s in self.data[key][i]:
a = str(self.data[key][i]).split("-")
score += int(float(a[1]))
cnt+=1
index+=1
if i+1 != len(self.data[key]) and not s in self.data[key][i+1]:
lst.append(s + "-" + str(float(score/cnt)))
s = str(self.data[key][index]).split("-")[0]
score = 0
self.data[key] = lst
itertools.groupby with a suitable key function can help:
import itertools
def get_country_name(item):
return item.split('-', 1)[0]
def get_country_value(item):
return float(item.split('-', 1)[1])
def country_avg_grouper(lst) :
for ctry, group in itertools.groupby(lst, key=get_country_name):
values = list(get_country_value(c) for c in group)
avg = sum(values)/len(values)
yield '{country}-{avg}'.format(country=ctry, avg=avg)
lst[:] = country_avg_grouper(lst)
The key here is that I wrote a function to do the change out of place and then I can easily make the substitution happen in place by using slice assignment.
I would probabkly do this with an intermediate dictionary.
def country(s):
return s.split('-')[0]
def value(s):
return float(s.split('-')[1])
def country_average(lst):
country_map = {}|
for point in lst:
c = country(pair)
v = value(pair)
old = country_map.get(c, (0, 0))
country_map[c] = (old[0]+v, old[1]+1)
return ['%s-%f' % (country, sum/count)
for (country, (sum, count)) in country_map.items()]
It tries hard to only traverse the original list only once, at the expense of quite a few tuple allocations.
I've got an assignment and part of it asks to define a process_filter_description. Basically I have a list of images I want to filter:
images = ["1111.jpg", "2222.jpg", "circle.JPG", "square.jpg", "triangle.JPG"]
Now I have an association list that I can use to filter the images:
assc_list = [ ["numbers", ["1111.jpg", "2222.jpg"]] , ["shapes", ["circle.JPG", "square.jpg", "triangle.JPG"]] ]
I can use a filter description to select which association list I want to apply the filter the keyword is enclosed by colons):
f = ':numbers:'
I'm not exactly sure how to start it. In words I can at least think:
Filter is ':numbers:'
Compare each term of images to each term associated with numbers in the association list.
If term matches, then append term to empty list.
Right now I am just trying to get my code to print only the terms from the numbers association list, but it prints out all of them.
def process_filter_description(f, images, ia):
return_list = []
f = f[1:-1]
counter = 0
if f == ia[counter][0]:
#print f + ' is equal to ' + ia[counter][0]
for key in ial:
for item in key[1]:
#print item
#return_list.append(item)
return return_list
Instead of an "associative list", how about using a dictionary?
filter_assoc = {'numbers': ['1111.jpg', '2222.jpg'] ,
'shapes': ['circle.JPG', 'square.jpg', 'triangle.JPG']}
Now, just see which images are in each group:
>>> filter_assoc['numbers']
['1111.jpg', '2222.jpg']
>>>
>>> filter_assoc['shapes']
['circle.JPG', 'square.jpg', 'triangle.JPG']
Your processing function would become immensely simpler:
def process_filter_description(filter, association):
return association[filter[1:-1]]
I'll just think aloud here, so this is what I'd use as a function to perform the task of the dictionary:
def process_filter_description(index, images, association):
return_list = []
index = index[1:-1]
for top_level in association:
if top_level[0] == index:
for item in top_level[1]:
return_list.append(item)
break
return return_list