Develop Reference

python regex - removing 'word' while keeping ['word']

I'd like to remove Opportunity while keeping '[Opportunity]'.
Winery Tailspin Electonic Opportunity [Opportunity].[Opportunity Name]
How do I do that?

You can use count parameter in re.sub as below if it occurs always before your '[word]'.
re.sub('Opportunity','',string,count = 1)

I am not sure what do you want with [Opportunity Name] bit, but following line will remove all Opportunity which have not adjacent [ or ]:
re.sub('([^\[])(Opportunity)([^\]])','\g<1>\g<3>',string)
This code use grouping in regex and match strings in form of
(any character different than [)(Opportunity)(any character different than ])
then replace with first and third group i.e. adjacent characters.
Using your example would give in effect
Winery Tailspin Electonic [Opportunity].[Opportunity Name]
Notice however, that this solution will work if and only if Opportunity is not first and not last word. Is this true in your case?

Search a delimited string in a file - Python

I have the following read.json file
{:{"JOL":"EuXaqHIbfEDyvph%2BMHPdCOJWMDPD%2BGG2xf0u0mP9Vb4YMFr6v5TJzWlSqq6VL0hXy07VDkWHHcq3At0SKVUrRA7shgTvmKVbjhEazRqHpvs%3D-%1E2D%TL/xs23EWsc40fWD.tr","LAPTOP":"error"}
and python script :
import re
shakes = open("read.json", "r")
needed = open("needed.txt", "w")
for text in shakes:
if re.search('JOL":"(.+?).tr', text):
print >> needed, text,
I want it to find what's between two words (JOL":" and .tr) and then print it. But all it does is printing all the text set in "read.json".

You're calling re.search, but you're not doing anything with the returned match, except to check that there is one. Instead, you're just printing out the original text. So of course you get the whole line.
The solution is simple: just store the result of re.search in a variable, so you can use it. For example:
for text in shakes:
match = re.search('JOL":"(.+?).tr', text)
if match:
print >> needed, match.group(1)
In your example, the match is JOL":"EuXaqHIbfEDyvph%2BMHPdCOJWMDPD%2BGG2xf0u0mP9Vb4YMFr6v5TJzWlSqq6VL0hXy07VDkWHHcq3At0SKVUrRA7shgTvmKVbjhEazRqHpvs%3D-%1E2D%TL/xs23EWsc40fWD.tr, and the first (and only) group in it is EuXaqHIbfEDyvph%2BMHPdCOJWMDPD%2BGG2xf0u0mP9Vb4YMFr6v5TJzWlSqq6VL0hXy07VDkWHHcq3At0SKVUrRA7shgTvmKVbjhEazRqHpvs%3D-%1E2D%TL/xs23EWsc40fWD, which is (I think) what you're looking for.
However, a couple of side notes:
First, . is a special pattern in a regex, so you're actually matching anything up to any character followed by tr, not .tr. For that, escape the . with a \. (And, once you start putting backslashes into a regex, use a raw string literal.) So: r'JOL":"(.+?)\.tr'.
Second, this is making a lot of assumptions about the data that probably aren't warranted. What you really want here is not "everything between JOL":" and .tr", it's "the value associated with key 'JOL' in the JSON object". The only problem is that this isn't quite a JSON object, because of that prefixed :. Hopefully you know where you got the data from, and therefore what format it's actually in. For example, if you know it's actually a sequence of colon-prefixed JSON objects, the right way to parse it is:
d = json.loads(text[1:])
if 'JOL' in d:
print >> needed, d['JOL']
Finally, you don't actually have anything named needed in your code; you opened a file named 'needed.txt', but you called the file object love. If your real code has a similar bug, it's possible that you're overwriting some completely different file over and over, and then looking in needed.txt and seeing nothing changed each time…

If you know that your starting and ending matching strings only appear once, you can ignore that it's JSON. If that's OK, then you can split on the starting characters (JOL":"), take the 2nd element of the split array [1], then split again on the ending characters (.tr) and take the 1st element of the split array [0].
>>> text = '{:{"JOL":"EuXaqHIbfEDyvph%2BMHPdCOJWMDPD%2BGG2xf0u0mP9Vb4YMFr6v5TJzWlSqq6VL0hXy07VDkWHHcq3At0SKVUrRA7shgTvmKVbjhEazRqHpvs%3D-%1E2D%TL/xs23EWsc40fWD.tr","LAPTOP":"error"}'
>>> text.split('JOL":"')[1].split('.tr')[0]
'EuXaqHIbfEDyvph%2BMHPdCOJWMDPD%2BGG2xf0u0mP9Vb4YMFr6v5TJzWlSqq6VL0hXy07VDkWHHcq3At0SKVUrRA7shgTvmKVbjhEazRqHpvs%3D-%1E2D%TL/xs23EWsc40fWD'

Python re module groups match mechanism

Question Formation
background
As I am reading through the tutorial at python2.7 redoc, it introduces the behavior of the groups:
The groups() method returns a tuple containing the strings for all the subgroups, from 1 up to however many there are.
question
I clearly understands how this works singly. but I can understand the following example:
>>> m = re.match("([abc])+","abc")
>>> m.groups()
('c',)
I mean, isn't + simply means one or more. If so, shouldn't the regex ([abc])+ = ([abc])([abc])+ (not formal BNF). Thus, the result should be:
('a','b','c')
Please shed some light about the mechanism behind, thanks.
P.S
I want to learn the regex language interpreter, how should I start with? books or regex version, thanks!

Well, I guess a picture is worth a 1000 words:
link to the demo
what's happening is that, as you can see on the visual representation of the automaton, your regexp is grouping over a one character one or more times until it reaches the end of the match. Then that last character gets into the group.
If you want to get the output you say, you need to do something like the following:
([abc])([abc])([abc])
which will match and group one character at each position.
About documentation, I advice you to read first theory of NFA, and regexps. The MIT documentation on the topic is pretty nice:
http://ocw.mit.edu/courses/electrical-engineering-and-computer-science/6-045j-automata-computability-and-complexity-spring-2011/lecture-notes/

Basically, the groups that are referred to in regex terminology are the capture groups as defined in your regex.
So for example, in '([abc])+', there's only a single capture group, namely, ([abc]), whereas in something like '([abc])([xyz])+' there are 2 groups.
So in your example, calling .groups() will always return a tuple of length 1 because that is how many groups exist in your regex.
The reason why it isn't returning the results you'd expect is because you're using the repeat operator + outside of the group. This ends up causing the group to equal only the last match, and thus only the last match (c) is retained. If, on the other hand, you had used '([abc]+)' (notice the + is inside the capture group), the results would have been:
('abc',)

One pair of grouping parentheses forms one group, even if it's inside a quantifier. If a group matches multiple times due to a quantifier, only the last match for that group is saved. The group doesn't become as many groups as it had matches.

Match any characters more than once, but stop at a given character

I am writing a regex that will be used for recognizing commands in a string. I have three possible words the commands could start with and they always end with a semi-colon.
I believe the regex pattern should look something like this:
(command1|command2|command3).+;
The problem, I have found, is that since . matches any character and + tells it to match one or more, it skips right over the first instance of a semi-colon and continues going.
Is there a way to get it to stop at the first instance of a semi-colon it comes across? Is there something other than . that I should be using instead?

The issue you are facing with this: (command1|command2|command3).+; is that the + is greedy, meaning that it will match everything till the last value.
To fix this, you will need to make it non-greedy, and to do that you need to add the ? operator, like so: (command1|command2|command3).+?;
Just as an FYI, the same applies for the * operator. Adding a ? will make it non greedy.

Tell it to find only non-semicolons.
[^;]+

What you are looking for is a non-greedy match.
.+?
The "?" after your greedy + quantifier will make it match as less as possible, instead of as much as possible, which it does by default.
Your regex would be
'(command1|command2|command3).+?;'
See Python RE documentation

Regular expression code is not working (Python)

Assume I have a word AB1234XZY or even 1AB1234XYZ.
I want to extract ONLY 'AB1234' or 1AB1234 (ie. everything up until the letters at the end).
I have used the following code to extract that but it's not working:
base= re.match(r"^(\D+)(\d+)", word).group(0)
When I print base, it's not working for the second case. Any ideas why?

Your regex doesn't work for the second case because it starts with a number; the \D at the beginning of your pattern matches anything that ISN'T a number.
You should be able to use something quite simple for this--simpler, in fact, than anything else I see here.
'.*\d'
That's it! This should match everything up to and including the last number in your string, and ignore everything after that.
Here's the pattern working online, so you can see for yourself.

(.+?\d+)\w+ would give you what you want.
Or even something like this
^(.+?)[a-zA-Z]+$

re.match starts at the beginning of the string, and re.search simply looks for it in the string. both return the first match. .group(0) is everything included in the match, if you had capturing groups, then .group(1) is the first group...etc etc... as opposed to normal convention where 0 is the first index, in this case, 0 is a special use case meaning everything.
in your case, depending on what you really need to capture, maybe using re.search is better. and instead of using 2 groups, you can use (\D+\d+) keep in mind, it will capture the first (non-digits,digits) group. it might be sufficient for you, but you might want to be more specific.
after reading your comment "everything before the letters at the end"
this regex is what you need:
regex = re.compile(r'(.+)[A-Za-z]')