Develop Reference

python logging to file vs console with certain logLevel

import logging
import sys
logger = logging.getLogger(__name__)
logger.setLevel(logging.INFO)
file_handler = logging.FileHandler('test.log')
file_handler.setLevel(logging.DEBUG)
logger.addHandler(file_handler)
console_handler = logging.StreamHandler(sys.stdout)
console_handler.setLevel(logging.DEBUG)
logger.addHandler(console_handler)
logger.info('Info print')
logger.debug('Debug print')
I have simple code above. How come the debug statement doesn't print? It seems like the logLevel is always determined by line 5. The file_handler.setLevel and the console_handler.setLevel seem to do nothing. I want to eventually have debug prints going to the test.log file, and info prints going to the console.

The logger and handler levels are both used, but at different times. The logger's level is inspected first, and if the event severity level is >= the logger's level, then the event is passed to handlers. The event's level is then checked against each handler's level to determine if that handler handles the event.

Python logging: Why am not seing the INFO and DEBUG mnessages? [duplicate]

I created the following script. Could any of you explain to me why the output is like what shows below
Source
import logging
logger = logging.getLogger()
logger.setLevel(logging.DEBUG)
print('debug', logger.isEnabledFor(logging.DEBUG))
print('info', logger.isEnabledFor(logging.INFO))
print('warning', logger.isEnabledFor(logging.WARNING))
print('error', logger.isEnabledFor(logging.ERROR))
logger.debug('debug')
logger.info('info')
logger.warning('warning')
logger.error('error')
logging.debug('debug')
logging.info('info')
logging.warning('warning')
logging.error('error')
Output
debug True
info True
warning True
error True
warning
error
DEBUG:root:debug
INFO:root:info
WARNING:root:warning
ERROR:root:error
Specifically
what is the difference between logger.info and logging.info here
how come that logger.isEnabledFor(logging.DEBUG) is True while logger.debug('debug') does not show anything
how come that logger.info has no output but logging.info has

A few things to clarify:
Default log level for root logger is WARNING
Root logger is not initialized if you do nothing, that is, without any handlers or formatter set up:
>>> import logging
>>> logging.root.handlers
[]
Okay, but you found out the problem: when logging level set to DEBUG, the root logger is not working as expected. Debug messages are ignored. With the same not configured root logger, warning messages output normally. Why is that?
Keep in mind we don't have any handler for root logger right now. But looking into the code, we do see:
if (found == 0):
if lastResort:
if record.levelno >= lastResort.level:
lastResort.handle(record)
elif raiseExceptions and not self.manager.emittedNoHandlerWarning:
sys.stderr.write("No handlers could be found for logger"
" \"%s\"\n" % self.name)
self.manager.emittedNoHandlerWarning = True
Which means, we have a lastResort for backup if no handler is found. You can refer to the definition of lastResort, it is initialized with logging level WARNING. Meanwhile, debug messages don't have this backup so they are ignored when no handler is set.
For your questions:
These two loggers are identical, since the root logger is returned when getLogger() receives no arguments.
See below:
Logger.isEnabledFor(lvl)
Indicates if a message of severity lvl would
be processed by this logger. This method checks first the module-level
level set by logging.disable(lvl) and then the logger’s effective
level as determined by getEffectiveLevel().
Calling any logging functions in logging module will initialize the root logger with basicConfig() which adds a default handler, so that the subsequent calls on logger will also work.
What you should do is, use logging.basicConfig() to set up a default handler for root logger and messages will be output according to the logger level and message level.

getLogger creates an instance of Logger class if argument name is added. Otherwise it returns root logger. So in this case the program is using the common logger as functions logging.debug, logging.info, logging.warning, logging.info

Logging setLevel is being ignored

The below code is copied from the documentation. I am supposed to be able to see all the info logs. But I don't. I am only able to see the warn and above even though I've set setLevel to INFO.
Why is this happening? foo.py:
import logging
logger = logging.getLogger(__name__)
logger.setLevel(logging.DEBUG)
logger.debug('debug message')
logger.info('info message')
logger.warn('warn message')
logger.error('error message')
logger.critical('critical message')
Output:
workingDirectory$ python foo.py
warn message
error message
critical message
Where did the info and debug messages go??

Replace the line
logger.setLevel(logging.DEBUG)
with
logging.basicConfig(level=logging.DEBUG, format='%(message)s')
and it should work as expected. If you don't configure logging with any handlers (as in your post - you only configure a level for your logger, but no handlers anywhere), you'll get an internal handler "of last resort" which is set to output just the message (with no other formatting) at the WARNING level.

Try running logging.basicConfig() in there. Of note, I see you mention INFO, but use DEBUG. As written, it should show all five messages. Swap out DEBUG with INFO, and you should see four messages.
import logging
logging.basicConfig()
logger = logging.getLogger(__name__)
logger.setLevel(logging.DEBUG)
logger.debug('debug message')
logger.info('info message')
logger.warn('warn message')
logger.error('error message')
logger.critical('critical message')
edit: Do you have logging set up elsewhere in your code already? Can't reproduce the exact behavior you note with the specific code provided.

As pointed by some users, using:
logging.basicConfig(level=logging.DEBUG, format='%(message)s')
like written in the accepted answer is not a good option because it sets the log level for the root logger, so it may lead to unexpected behaviours (eg. third party libraries may start to log debug messages if you set loglevel=logging.DEBUG)
In my opinion the best solution is to set log level just for your logger, like this:
import logging
logger = logging.getLogger('MyLogger')
handler = logging.StreamHandler()
formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')
handler.setFormatter(formatter)
logger.addHandler(handler)
logger.setLevel(logging.DEBUG)
Not really intuitive solution, but is necessary if you want to set log level only for 'MyLogger' and leave the root logger untouched.
So, why is logging.basicConfig(level=logging.DEBUG, format='%(message)s') setting the log level globally?
Well, actually it doesn't. As said, it's just changing the configuration of the root logger and, as described in the python documentation:
Loggers should NEVER be instantiated directly, but always through the
module-level function logging.getLogger(name). Multiple calls to
getLogger() with the same name will always return a reference to the
same Logger object.
So, logging.basicConfig is creating a StreamHandler with a default Formatter and adding it to the root logger.
The point is that if any other library is using the "root logger", you're going to set that log level for that library too so it can happen that you start to see debug logs from third party libraries.
This is why I think it's better to create your own logger and set your own formatters and handlers, so you can leave the root logger untouched.

This is technically also an "answer", because it can "solve" the problem. BUT I definitely DO NOT like it. It is not intuitive, and I lost 2+ hours over it.
Before:
import logging
logger = logging.getLogger('foo')
logger.setLevel(logging.INFO)
logger.info('You can not see me')
# Or you can just use the following one-liner in command line.
# $ python -c "import logging; logger = logging.getLogger('foo'); logger.setLevel(logging.INFO); logger.info('You can not see me')"
After:
import logging
logging.debug('invisible magic') # <-- magic
logger = logging.getLogger('foo')
logger.setLevel(logging.INFO)
logger.info('But now you can see me')
# Or you can just use the following one-liner in command line.
$ python -c "import logging; logging.debug('invisible magic'); logger = logging.getLogger('foo'); logger.setLevel(logging.INFO); logger.info('But now you see me')"
PS: Comparing it to the current chosen answer, and #Vinay-Sajip's explanation, I can kind of understand why. But still, I wish it was not working that way.

If you want this to work WITHOUT basicConfig, you have to first set up the lowest possible level you'll log onto the logger. Since the logger sets a minimum threshold, handlers which have a lower threshold but belong to the same logger won't get those lower threshold messages since they're ignored by the logger in the first place. Intuitive, but not obvious.
We start by doing this:
lgr = logging.getLogger(name)
lgr.setLevel(logging.DEBUG)
Then, set up the handlers with the different levels you need, in my case I want DEBUG logging on stdout and INFO logging to a rotating file, so I do the following:
rot_hndlr = RotatingFileHandler('filename.log',
maxBytes=log_size,
backupCount=3)
rot_hndlr.setFormatter(formatter)
rot_hndlr.setLevel(logging.INFO)
lgr.addHandler(rot_hndlr)
stream_hndlr = logging.StreamHandler()
stream_hndlr.setFormatter(stream_formatter)
lgr.addHandler(stream_hndlr)
Then, to test, I do this:
lgr.debug("Hello")
lgr.info("There")
My stdout (console) will look like this:
Hello
There
and my filename.log file will look like this:
There

In short, change the level in logging.basicConfig will influence the global settings.
You should better set level for each logger and the specific handler in the logger.
The following is an example that displays all levels on the console and only records messages >= errors in log_file.log. Notice the level for each handler is different.
import logging
# Define logger
logger = logging.getLogger('test')
# Set level for logger
logger.setLevel(logging.DEBUG)
# Define the handler and formatter for console logging
consoleHandler = logging.StreamHandler() # Define StreamHandler
consoleHandler.setLevel(logging.DEBUG) # Set level
concolsFormatter = logging.Formatter('%(name)s - %(levelname)s - %(message)s') # Define formatter
consoleHandler.setFormatter(concolsFormatter) # Set formatter
logger.addHandler(consoleHandler) # Add handler to logger
# Define the handler and formatter for file logging
log_file = 'log_file'
fileHandler = logging.FileHandler(f'{log_file}.log') # Define FileHandler
fileHandler.setLevel(logging.ERROR) # Set level
fileFormatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s') # Define formatter
fileHandler.setFormatter(fileFormatter) # Set formatter
logger.addHandler(fileHandler) # Add handler to logger
# Test
logger.debug('This is a debug')
logger.info('This is an info')
logger.warning('This is a warning')
logger.error('This is an error')
logger.critical('This is a critical')
Console output:
# Test
test - DEBUG - This is a debug
test - INFO - This is an info
test - WARNING - This is a warning
test - ERROR - This is an error
test - CRITICAL - This is a critical
File log_file.log content:
2021-09-22 12:50:50,938 - test - ERROR - This is an error
2021-09-22 12:50:50,938 - test - CRITICAL - This is a critical
To review your logger's level:
logger.level
The result should be one of the following:
10 # DEBUG
20 # INFO
30 # WARNING
40 # ERROR
50 # CRITICAL
To review your handlers's levels:
logger.handlers
[<StreamHandler stderr (DEBUG)>,
<FileHandler ***/log_file.log (ERROR)>]

The accepted answer does not work for me on Win10, Python 3.7.2.
My solution:
logging.basicConfig(level=logging.DEBUG)
logger = logging.getLogger(__name__)
logger.setLevel(logging.DEBUG)
It's order sensitive.

You have to set the basicConfig of the root logger to DEBUG, then you can set the level of your individual loggers to more restrictive levels.
This is not what I expected. Here is what I had to do:
#!/usr/bin/env python3
import logging
# by default this is WARNING. Leaving it as WARNING here overrides
# whatever setLevel-ing you do later so it seems they are ignored.
logging.basicConfig(level=logging.DEBUG)
l = logging.getLogger(__name__)
l.setLevel(level=logging.INFO)
# if I hadn't called basicConfig with DEBUG level earlier,
# info messages would STILL not be shown despite calling
# setLevel above. However now debug messages will not be shown
# for l because setLevel set it to INFO
l.warning('A warning message will be displayed')
l.info('A friendly info message will be displayed')
l.debug('A friendly debug message will not be displayed')

Most of the answers that I've found for this issue uses the basicConfig of the root logger.
It's not helpful for those who intend to use multiple independent loggers that were not initialised with basicConfig. The use of basicConfig implies that the loglevels of ALL loggers will be changed. It also had the unfortunate side effect of generating duplicate logs.
So I tried over several days experimenting with different ways to manipulate the loglevels and came up with one that finally worked.
The trick was to not only change the log levels of all the handlers but also the all the handlers of the parent of the logger.
def setLevel(self, infoLevel):
# To dynamically reset the loglevel, you need to also change the parent levels as well as all handlers!
self.logger.parent.setLevel(infoLevel)
for handler in self.logger.parent.handlers:
handler.setLevel(infoLevel)
self.logger.setLevel(infoLevel)
for handler in self.logger.handlers:
handler.setLevel(infoLevel)
The inspiration came from the fact that the basicConfig changes the root logger settings, so I was trying to do the same without using basicConfig.
For those that are interested, I did a little Python project on Github that illustrates the different issues with setting loglevel of the logger (it works partially), proves the SLogger (Sample Logger) implementation works, and also illustrates the duplicate log issue with basicConfig when using multiple loggers not initialised with it.
https://github.com/FrancisChung/python-logging-playground
TLDR: If you're only interested in a working sample code for the logger, the implentation is listed below
import logging
CRITICAL = 50
FATAL = CRITICAL
ERROR = 40
WARNING = 30
WARN = WARNING
INFO = 20
DEBUG = 10
NOTSET = 0
class SLogger():
"""
SLogger : Sample Logger class using the standard Python logging Library
Parameters:
name : Name of the Logger
infoLevel : logging level of the Logger (e.g. logging.DEBUG/INFO/WARNING/ERROR)
"""
def __init__(self, name: str, infoLevel=logging.INFO):
try:
if name is None:
raise ValueError("Name argument not specified")
logformat = '%(asctime)s %(levelname)s [%(name)s %(funcName)s] %(message)s'
self.logformat = logformat
self.name = name.upper()
self.logger = logging.getLogger(self.name)
self.logger.setLevel(infoLevel)
self.add_consolehandler(infoLevel, logformat)
except Exception as e:
if self.logger:
self.logger.error(str(e))
def error(self, message):
self.logger.error(message)
def info(self, message):
self.logger.info(message)
def warning(self, message):
self.logger.warning(message)
def debug(self, message):
self.logger.debug(message)
def critical(self, message):
self.logger.critical(message)
def setLevel(self, infoLevel):
# To dynamically reset the loglevel, you need to also change the parent levels as well as all handlers!
self.logger.parent.setLevel(infoLevel)
for handler in self.logger.parent.handlers:
handler.setLevel(infoLevel)
self.logger.setLevel(infoLevel)
for handler in self.logger.handlers:
handler.setLevel(infoLevel)
return self.logger.level
def add_consolehandler(self, infoLevel=logging.INFO,
logformat='%(asctime)s %(levelname)s [%(name)s %(funcName)s] %(message)s'):
sh = logging.StreamHandler()
sh.setLevel(infoLevel)
formatter = logging.Formatter(logformat)
sh.setFormatter(formatter)
self.logger.addHandler(sh)

Create object the right way, e.g. inspired by Google:
import logging
formatter = logging.Formatter('%(asctime)s %(threadName)s: %(message)s')
log = logging.getLogger(__name__)
log.setLevel(logging.DEBUG)
handler = logging.StreamHandler()
handler.setFormatter(formatter)
log.addHandler(handler)
log.debug('debug message')
log.info('info message')
log.warn('warn message')
log.error('error message')
log.critical('critical message')
2022-11-22 23:17:59,342 MainThread: debug message
2022-11-22 23:17:59,342 MainThread: info message
2022-11-22 23:17:59,342 MainThread: warn message
2022-11-22 23:17:59,342 MainThread: error message
2022-11-22 23:17:59,342 MainThread: critical message

As pointed out by #ManuelFedele, logging.basicConfig is not a good solution.
#VinaySajip explained that the setLevel is ignored because the logger is using the internal handler "of last resort", whose level is set to WARNING.
This explanation was also helpful:
The Handler.setLevel() method, just as in logger objects, specifies the lowest severity that will be dispatched to the appropriate destination. Why are there two setLevel() methods? The level set in the logger determines which severity of messages it will pass to its handlers. The level set in each handler determines which messages that handler will send on.
So a good solution is to add a handler to the logger, with the appropriate level:
import logging
logger = logging.getLogger(__name__)
logger.setLevel(logging.DEBUG)
ch = logging.StreamHandler()
ch.setLevel(logging.DEBUG) # or whatever level should be displayed on the console
logger.addHandler(ch)
Output
>>> logger.debug('debug message')
debug message
>>> logger.info('info message')
info message
>>> logger.warn('warn message')
<stdin>:1: DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead
warn message
>>> logger.error('error message')
error message
>>> logger.critical('critical message')
critical message

Python Logging - Prevent log events from being printed to the console

I can't figure out why log events are being printed to the console when I have not defined a console handler. All of the examples I read through have explicitly defined a console handler (streamhandler) in order to print messages to the console.
I want these events to be printed to a file only.
import logging
logger = logging.getLogger(__name__)
my_format = '%(asctime)-25s %(levelname)-8s LOGGER: %(name)-12s MODULE: %(module)-15s FUNCTION: %(funcName)-30s MSG: %(message)s'
my_datefmt ='%m/%d/%Y %I:%M:%S%p'
logging.basicConfig(format=my_format, datefmt=my_datefmt, level=logging.DEBUG)
formatter = logging.Formatter(my_format, datefmt=my_datefmt)
logger.setLevel(logging.DEBUG)
handler1 = logging.FileHandler('mylog.txt')
handler1.setLevel(logging.DEBUG)
handler1.setFormatter(formatter)
logger.addHandler(handler1)
logger.debug("Why is this printed to the console")
EDIT:
It has been pointed out that I was not considering the root logger. Upon calling logging.basicConfig, a default streamhandler is added to the root logger (logger = getLogger())
The root logger's handler can be modified, however I have found that I can just prevent my logger from propagating logs up to the root logger.
This can be done like so:
import logging
logger = logging.getLogger(__name__)
my_format = '%(asctime)-25s %(levelname)-8s LOGGER: %(name)-12s MODULE: %(module)-15s FUNCTION: %(funcName)-30s MSG: %(message)s'
my_datefmt ='%m/%d/%Y %I:%M:%S%p'
logging.basicConfig(format=my_format, datefmt=my_datefmt, level=logging.DEBUG)
formatter = logging.Formatter(my_format, datefmt=my_datefmt)
logger.setLevel(logging.DEBUG)
handler1 = logging.FileHandler('mylog.txt')
handler1.setLevel(logging.DEBUG)
handler1.setFormatter(formatter)
logger.addHandler(handler1)
logger.propagate = False ####
logger.debug("Why is this printed to the console")

> ipython
import logging
logging.basicConfig?
*****************logging.basicConfig**************
Signature: logging.basicConfig(**kwargs)
Docstring:
Do basic configuration for the logging system.
This function does nothing if the root logger already has handlers
configured. It is a convenience method intended for use by simple scripts
to do one-shot configuration of the logging package.
The default behaviour is to create a StreamHandler which writes to
sys.stderr, set a formatter using the BASIC_FORMAT format string, and
add the handler to the root logger.
...
You have 2 handlers.

logging.info doesn't show up on console but warn and error do

When I log an event with logging.info, it doesn't appear in the Python terminal.
import logging
logging.info('I am info') # no output
In contrast, events logged with logging.warn do appear in the terminal.
import logging
logging.warn('I am warning') # outputs "I am warning"
Is there a environment level change I can to make logging.info print to the console? I want to avoid making changes in each Python file.

The root logger always defaults to WARNING level. Try calling
logging.getLogger().setLevel(logging.INFO)
and you should be fine.

Like #ztyx said that default logger level is WARNING. You have to set it to a lower level
You can do it by using logging.basicConfig and setting logger level:
logging.basicConfig(level=logging.DEBUG)

The above solutions didn't work for me, but the code here did:
# set up logging to file
logging.basicConfig(level=logging.DEBUG,
format='%(asctime)s %(name)-12s %(levelname)-8s %(message)s',
datefmt='%m-%d %H:%M',
filename='/temp/myapp.log',
filemode='w')
# define a Handler which writes INFO messages or higher to the sys.stderr
console = logging.StreamHandler()
console.setLevel(logging.INFO)
# add the handler to the root logger
logging.getLogger('').addHandler(console)
(I omitted parts of the code for the sake of readability)

This will work
import logging
logging.basicConfig()
logger = logging.getLogger(__name__)
logger.setLevel(logging.INFO)
logger.info('its working')

In more recent versions of Python 3 (tested with Python 3.8), console logging requires creating a console handler to correctly show info messages.
The following example is modified from the Configuring Logging example in the Python documentation:
import logging
# create logger
logger = logging.getLogger('__name__')
level = logging.INFO
logger.setLevel(level)
# ----> console info messages require these lines <----
# create console handler and set level to debug
ch = logging.StreamHandler()
ch.setLevel(level)
# add ch to logger
logger.addHandler(ch)
# -----------------------------------------------------
# 'application' code
logger.debug('debug message')
logger.info('info message')
logger.warning('warn message')
logger.error('error message')
logger.critical('critical message')
Running the above code generates the following output:
info message
warn message
error message
critical message
Here is this same code without the console handler.
import logging
# create logger
logger = logging.getLogger('__name__')
level = logging.INFO
logger.setLevel(level)
# 'application' code
logger.debug('debug message')
logger.info('info message')
logger.warning('warn message')
logger.error('error message')
logger.critical('critical message')
Without the console handler, the output does not include the info message:
warn message
error message
critical message
I do not understand why this is the case as it seems unnecessary.

What's the minimum required code for a working module-level logger? I did an experiment (with python version 3.8.6).
The take-away is:
logging.basicConfig() is needed (however, specifying level=... is NOT needed)
it's necessary to configure the root logger: logging.getLogger().setLevel(...)
So, a minimum working example is:
The library/module code does NOT need to configure the logger:
# library/module code: lib.py
import logging
LOGGER = logging.getLogger('x.y.z')
def some_function():
LOGGER.info("hi")
The application code need to configure the logger with 2 lines at minimum:
# Application Code
import logging, lib
logging.basicConfig()
logging.getLogger().setLevel(logging.INFO) # configure root logger
main() # code that will trigger lib
Here's the experiment:
In [1]: import logging
In [2]: lg = logging.getLogger('x.y.z')
In [3]: lg.info(1)
In [4]: logging.basicConfig()
In [5]: lg.info(1)
In [6]: logging.basicConfig(level=logging.INFO)
In [7]: lg.info(1)
In [8]: logging.basicConfig()
In [9]: logging.getLogger().setLevel(logging.INFO)
In [10]: lg.info(1)
INFO:x.y.z:1

For those using absl.logging, the equivalent command is
from absl import logging
logging.set_verbosity(logging.INFO)

If you are using Django to power your server, you just simply need to change the log level in your settings.py file as such:
"handlers": {
"console": {
-- "level": "WARNING",
++ "level": "INFO",
"class": "logging.StreamHandler",
"formatter": "stackdriver",
}
},
More examples in the documentation here:
https://docs.djangoproject.com/en/4.0/topics/logging/#configuring-logging-1

logging.info() will use the root logger for logging.
According to official doc,
if you do not set an explicit handler for the logger, a special handler called lastResort will be used.
See the code here. By default the logging level of lastResort (it is stream handler) is 30.
we can change its level to output info message.
# setting both the logger and handler's level will work as expected.
logger.setLevel(logging.DEBUG)
logging.lastResort.setLevel(logging.DEBUG)
However, this is like a hack and never a encouraged action.
Using logging.basicConfig()
If we want to do logging real quick, we can use the method logging.basicConfig.
logging.basicConfig(level=logging.DEBUG)
This will create the logger. The logger.level will be the level we set here.
A stream handler will be also created, with level NOTSET.
Without a level param, the default level for root logger is WARNING.
reference
logger logging without handler: logger logging without a handler