Related
I have a program which interfaces with a radio I am using via a gui I wrote in PyQt. Obviously one of the main functions of the radio is to transmit data, but to do this continuously, I have to loop the writes, which causes the gui to hang. Since I have never dealt with threading, I tried to get rid of these hangs using QCoreApplication.processEvents(). The radio needs to sleep between transmissions, though, so the gui still hangs based on how long these sleeps last.
Is there a simple way to fix this using QThread? I have looked for tutorials on how to implement multithreading with PyQt, but most of them deal with setting up servers and are much more advanced than I need them to be. I honestly don't even really need my thread to update anything while it is running, I just need to start it, have it transmit in the background, and stop it.
I created a little example that shows 3 different and simple ways of dealing with threads. I hope it will help you find the right approach to your problem.
import sys
import time
from PyQt5.QtCore import (QCoreApplication, QObject, QRunnable, QThread,
QThreadPool, pyqtSignal)
# Subclassing QThread
# http://qt-project.org/doc/latest/qthread.html
class AThread(QThread):
def run(self):
count = 0
while count < 5:
time.sleep(1)
print("A Increasing")
count += 1
# Subclassing QObject and using moveToThread
# http://blog.qt.digia.com/blog/2007/07/05/qthreads-no-longer-abstract
class SomeObject(QObject):
finished = pyqtSignal()
def long_running(self):
count = 0
while count < 5:
time.sleep(1)
print("B Increasing")
count += 1
self.finished.emit()
# Using a QRunnable
# http://qt-project.org/doc/latest/qthreadpool.html
# Note that a QRunnable isn't a subclass of QObject and therefore does
# not provide signals and slots.
class Runnable(QRunnable):
def run(self):
count = 0
app = QCoreApplication.instance()
while count < 5:
print("C Increasing")
time.sleep(1)
count += 1
app.quit()
def using_q_thread():
app = QCoreApplication([])
thread = AThread()
thread.finished.connect(app.exit)
thread.start()
sys.exit(app.exec_())
def using_move_to_thread():
app = QCoreApplication([])
objThread = QThread()
obj = SomeObject()
obj.moveToThread(objThread)
obj.finished.connect(objThread.quit)
objThread.started.connect(obj.long_running)
objThread.finished.connect(app.exit)
objThread.start()
sys.exit(app.exec_())
def using_q_runnable():
app = QCoreApplication([])
runnable = Runnable()
QThreadPool.globalInstance().start(runnable)
sys.exit(app.exec_())
if __name__ == "__main__":
#using_q_thread()
#using_move_to_thread()
using_q_runnable()
Take this answer updated for PyQt5, python 3.4
Use this as a pattern to start a worker that does not take data and return data as they are available to the form.
1 - Worker class is made smaller and put in its own file worker.py for easy memorization and independent software reuse.
2 - The main.py file is the file that defines the GUI Form class
3 - The thread object is not subclassed.
4 - Both thread object and the worker object belong to the Form object
5 - Steps of the procedure are within the comments.
# worker.py
from PyQt5.QtCore import QThread, QObject, pyqtSignal, pyqtSlot
import time
class Worker(QObject):
finished = pyqtSignal()
intReady = pyqtSignal(int)
#pyqtSlot()
def procCounter(self): # A slot takes no params
for i in range(1, 100):
time.sleep(1)
self.intReady.emit(i)
self.finished.emit()
And the main file is:
# main.py
from PyQt5.QtCore import QThread
from PyQt5.QtWidgets import QApplication, QLabel, QWidget, QGridLayout
import sys
import worker
class Form(QWidget):
def __init__(self):
super().__init__()
self.label = QLabel("0")
# 1 - create Worker and Thread inside the Form
self.obj = worker.Worker() # no parent!
self.thread = QThread() # no parent!
# 2 - Connect Worker`s Signals to Form method slots to post data.
self.obj.intReady.connect(self.onIntReady)
# 3 - Move the Worker object to the Thread object
self.obj.moveToThread(self.thread)
# 4 - Connect Worker Signals to the Thread slots
self.obj.finished.connect(self.thread.quit)
# 5 - Connect Thread started signal to Worker operational slot method
self.thread.started.connect(self.obj.procCounter)
# * - Thread finished signal will close the app if you want!
#self.thread.finished.connect(app.exit)
# 6 - Start the thread
self.thread.start()
# 7 - Start the form
self.initUI()
def initUI(self):
grid = QGridLayout()
self.setLayout(grid)
grid.addWidget(self.label,0,0)
self.move(300, 150)
self.setWindowTitle('thread test')
self.show()
def onIntReady(self, i):
self.label.setText("{}".format(i))
#print(i)
app = QApplication(sys.argv)
form = Form()
sys.exit(app.exec_())
According to the Qt developers, subclassing QThread is incorrect (see http://blog.qt.io/blog/2010/06/17/youre-doing-it-wrong/). But that article is really hard to understand (plus the title is a bit condescending). I found a better blog post that gives a more detailed explanation about why you should use one style of threading over another: http://mayaposch.wordpress.com/2011/11/01/how-to-really-truly-use-qthreads-the-full-explanation/
Also, I would highly recommend this video from KDAB on signals and slots between threads.
In my opinion, you should probably never subclass thread with the intent to overload the run method. While that does work, you're basically circumventing how Qt wants you to work. Plus you'll miss out on things like events and proper thread safe signals and slots. Plus as you'll likely see in the above blog post, the "correct" way of threading forces you to write more testable code.
Here's a couple of examples of how to take advantage of QThreads in PyQt (I posted a separate answer below that properly uses QRunnable and incorporates signals/slots, that answer is better if you have a lot of async tasks that you need to load balance).
import sys
from PyQt4 import QtCore
from PyQt4 import QtGui
from PyQt4.QtCore import Qt
# very testable class (hint: you can use mock.Mock for the signals)
class Worker(QtCore.QObject):
finished = QtCore.pyqtSignal()
dataReady = QtCore.pyqtSignal(list, dict)
#QtCore.pyqtSlot()
def processA(self):
print "Worker.processA()"
self.finished.emit()
#QtCore.pyqtSlot(str, list, list)
def processB(self, foo, bar=None, baz=None):
print "Worker.processB()"
for thing in bar:
# lots of processing...
self.dataReady.emit(['dummy', 'data'], {'dummy': ['data']})
self.finished.emit()
class Thread(QtCore.QThread):
"""Need for PyQt4 <= 4.6 only"""
def __init__(self, parent=None):
QtCore.QThread.__init__(self, parent)
# this class is solely needed for these two methods, there
# appears to be a bug in PyQt 4.6 that requires you to
# explicitly call run and start from the subclass in order
# to get the thread to actually start an event loop
def start(self):
QtCore.QThread.start(self)
def run(self):
QtCore.QThread.run(self)
app = QtGui.QApplication(sys.argv)
thread = Thread() # no parent!
obj = Worker() # no parent!
obj.moveToThread(thread)
# if you want the thread to stop after the worker is done
# you can always call thread.start() again later
obj.finished.connect(thread.quit)
# one way to do it is to start processing as soon as the thread starts
# this is okay in some cases... but makes it harder to send data to
# the worker object from the main gui thread. As you can see I'm calling
# processA() which takes no arguments
thread.started.connect(obj.processA)
thread.start()
# another way to do it, which is a bit fancier, allows you to talk back and
# forth with the object in a thread safe way by communicating through signals
# and slots (now that the thread is running I can start calling methods on
# the worker object)
QtCore.QMetaObject.invokeMethod(obj, 'processB', Qt.QueuedConnection,
QtCore.Q_ARG(str, "Hello World!"),
QtCore.Q_ARG(list, ["args", 0, 1]),
QtCore.Q_ARG(list, []))
# that looks a bit scary, but its a totally ok thing to do in Qt,
# we're simply using the system that Signals and Slots are built on top of,
# the QMetaObject, to make it act like we safely emitted a signal for
# the worker thread to pick up when its event loop resumes (so if its doing
# a bunch of work you can call this method 10 times and it will just queue
# up the calls. Note: PyQt > 4.6 will not allow you to pass in a None
# instead of an empty list, it has stricter type checking
app.exec_()
# Without this you may get weird QThread messages in the shell on exit
app.deleteLater()
Very nice example from Matt, I fixed the typo and also pyqt4.8 is common now so I removed the dummy class as well and added an example for the dataReady signal
# -*- coding: utf-8 -*-
import sys
from PyQt4 import QtCore, QtGui
from PyQt4.QtCore import Qt
# very testable class (hint: you can use mock.Mock for the signals)
class Worker(QtCore.QObject):
finished = QtCore.pyqtSignal()
dataReady = QtCore.pyqtSignal(list, dict)
#QtCore.pyqtSlot()
def processA(self):
print "Worker.processA()"
self.finished.emit()
#QtCore.pyqtSlot(str, list, list)
def processB(self, foo, bar=None, baz=None):
print "Worker.processB()"
for thing in bar:
# lots of processing...
self.dataReady.emit(['dummy', 'data'], {'dummy': ['data']})
self.finished.emit()
def onDataReady(aList, aDict):
print 'onDataReady'
print repr(aList)
print repr(aDict)
app = QtGui.QApplication(sys.argv)
thread = QtCore.QThread() # no parent!
obj = Worker() # no parent!
obj.dataReady.connect(onDataReady)
obj.moveToThread(thread)
# if you want the thread to stop after the worker is done
# you can always call thread.start() again later
obj.finished.connect(thread.quit)
# one way to do it is to start processing as soon as the thread starts
# this is okay in some cases... but makes it harder to send data to
# the worker object from the main gui thread. As you can see I'm calling
# processA() which takes no arguments
thread.started.connect(obj.processA)
thread.finished.connect(app.exit)
thread.start()
# another way to do it, which is a bit fancier, allows you to talk back and
# forth with the object in a thread safe way by communicating through signals
# and slots (now that the thread is running I can start calling methods on
# the worker object)
QtCore.QMetaObject.invokeMethod(obj, 'processB', Qt.QueuedConnection,
QtCore.Q_ARG(str, "Hello World!"),
QtCore.Q_ARG(list, ["args", 0, 1]),
QtCore.Q_ARG(list, []))
# that looks a bit scary, but its a totally ok thing to do in Qt,
# we're simply using the system that Signals and Slots are built on top of,
# the QMetaObject, to make it act like we safely emitted a signal for
# the worker thread to pick up when its event loop resumes (so if its doing
# a bunch of work you can call this method 10 times and it will just queue
# up the calls. Note: PyQt > 4.6 will not allow you to pass in a None
# instead of an empty list, it has stricter type checking
app.exec_()
In PyQt there are a lot of options for getting asynchronous behavior. For things that need event processing (ie. QtNetwork, etc) you should use the QThread example I provided in my other answer on this thread. But for the vast majority of your threading needs, I think this solution is far superior than the other methods.
The advantage of this is that the QThreadPool schedules your QRunnable instances as tasks. This is similar to the task pattern used in Intel's TBB. It's not quite as elegant as I like but it does pull off excellent asynchronous behavior.
This allows you to utilize most of the threading power of Qt in Python via QRunnable and still take advantage of signals and slots. I use this same code in several applications, some that make hundreds of asynchronous REST calls, some that open files or list directories, and the best part is using this method, Qt task balances the system resources for me.
import time
from PyQt4 import QtCore
from PyQt4 import QtGui
from PyQt4.QtCore import Qt
def async(method, args, uid, readycb, errorcb=None):
"""
Asynchronously runs a task
:param func method: the method to run in a thread
:param object uid: a unique identifier for this task (used for verification)
:param slot updatecb: the callback when data is receieved cb(uid, data)
:param slot errorcb: the callback when there is an error cb(uid, errmsg)
The uid option is useful when the calling code makes multiple async calls
and the callbacks need some context about what was sent to the async method.
For example, if you use this method to thread a long running database call
and the user decides they want to cancel it and start a different one, the
first one may complete before you have a chance to cancel the task. In that
case, the "readycb" will be called with the cancelled task's data. The uid
can be used to differentiate those two calls (ie. using the sql query).
:returns: Request instance
"""
request = Request(method, args, uid, readycb, errorcb)
QtCore.QThreadPool.globalInstance().start(request)
return request
class Request(QtCore.QRunnable):
"""
A Qt object that represents an asynchronous task
:param func method: the method to call
:param list args: list of arguments to pass to method
:param object uid: a unique identifier (used for verification)
:param slot readycb: the callback used when data is receieved
:param slot errorcb: the callback used when there is an error
The uid param is sent to your error and update callbacks as the
first argument. It's there to verify the data you're returning
After created it should be used by invoking:
.. code-block:: python
task = Request(...)
QtCore.QThreadPool.globalInstance().start(task)
"""
INSTANCES = []
FINISHED = []
def __init__(self, method, args, uid, readycb, errorcb=None):
super(Request, self).__init__()
self.setAutoDelete(True)
self.cancelled = False
self.method = method
self.args = args
self.uid = uid
self.dataReady = readycb
self.dataError = errorcb
Request.INSTANCES.append(self)
# release all of the finished tasks
Request.FINISHED = []
def run(self):
"""
Method automatically called by Qt when the runnable is ready to run.
This will run in a separate thread.
"""
# this allows us to "cancel" queued tasks if needed, should be done
# on shutdown to prevent the app from hanging
if self.cancelled:
self.cleanup()
return
# runs in a separate thread, for proper async signal/slot behavior
# the object that emits the signals must be created in this thread.
# Its not possible to run grabber.moveToThread(QThread.currentThread())
# so to get this QObject to properly exhibit asynchronous
# signal and slot behavior it needs to live in the thread that
# we're running in, creating the object from within this thread
# is an easy way to do that.
grabber = Requester()
grabber.Loaded.connect(self.dataReady, Qt.QueuedConnection)
if self.dataError is not None:
grabber.Error.connect(self.dataError, Qt.QueuedConnection)
try:
result = self.method(*self.args)
if self.cancelled:
# cleanup happens in 'finally' statement
return
grabber.Loaded.emit(self.uid, result)
except Exception as error:
if self.cancelled:
# cleanup happens in 'finally' statement
return
grabber.Error.emit(self.uid, unicode(error))
finally:
# this will run even if one of the above return statements
# is executed inside of the try/except statement see:
# https://docs.python.org/2.7/tutorial/errors.html#defining-clean-up-actions
self.cleanup(grabber)
def cleanup(self, grabber=None):
# remove references to any object or method for proper ref counting
self.method = None
self.args = None
self.uid = None
self.dataReady = None
self.dataError = None
if grabber is not None:
grabber.deleteLater()
# make sure this python obj gets cleaned up
self.remove()
def remove(self):
try:
Request.INSTANCES.remove(self)
# when the next request is created, it will clean this one up
# this will help us avoid this object being cleaned up
# when it's still being used
Request.FINISHED.append(self)
except ValueError:
# there might be a race condition on shutdown, when shutdown()
# is called while the thread is still running and the instance
# has already been removed from the list
return
#staticmethod
def shutdown():
for inst in Request.INSTANCES:
inst.cancelled = True
Request.INSTANCES = []
Request.FINISHED = []
class Requester(QtCore.QObject):
"""
A simple object designed to be used in a separate thread to allow
for asynchronous data fetching
"""
#
# Signals
#
Error = QtCore.pyqtSignal(object, unicode)
"""
Emitted if the fetch fails for any reason
:param unicode uid: an id to identify this request
:param unicode error: the error message
"""
Loaded = QtCore.pyqtSignal(object, object)
"""
Emitted whenever data comes back successfully
:param unicode uid: an id to identify this request
:param list data: the json list returned from the GET
"""
NetworkConnectionError = QtCore.pyqtSignal(unicode)
"""
Emitted when the task fails due to a network connection error
:param unicode message: network connection error message
"""
def __init__(self, parent=None):
super(Requester, self).__init__(parent)
class ExampleObject(QtCore.QObject):
def __init__(self, parent=None):
super(ExampleObject, self).__init__(parent)
self.uid = 0
self.request = None
def ready_callback(self, uid, result):
if uid != self.uid:
return
print "Data ready from %s: %s" % (uid, result)
def error_callback(self, uid, error):
if uid != self.uid:
return
print "Data error from %s: %s" % (uid, error)
def fetch(self):
if self.request is not None:
# cancel any pending requests
self.request.cancelled = True
self.request = None
self.uid += 1
self.request = async(slow_method, ["arg1", "arg2"], self.uid,
self.ready_callback,
self.error_callback)
def slow_method(arg1, arg2):
print "Starting slow method"
time.sleep(1)
return arg1 + arg2
if __name__ == "__main__":
import sys
app = QtGui.QApplication(sys.argv)
obj = ExampleObject()
dialog = QtGui.QDialog()
layout = QtGui.QVBoxLayout(dialog)
button = QtGui.QPushButton("Generate", dialog)
progress = QtGui.QProgressBar(dialog)
progress.setRange(0, 0)
layout.addWidget(button)
layout.addWidget(progress)
button.clicked.connect(obj.fetch)
dialog.show()
app.exec_()
app.deleteLater() # avoids some QThread messages in the shell on exit
# cancel all running tasks avoid QThread/QTimer error messages
# on exit
Request.shutdown()
When exiting the application you'll want to make sure you cancel all of the tasks or the application will hang until every scheduled task has completed
Based on the Worker objects methods mentioned in other answers, I decided to see if I could expand on the solution to invoke more threads - in this case the optimal number the machine can run and spin up multiple workers with indeterminate completion times.
To do this I still need to subclass QThread - but only to assign a thread number and to 'reimplement' the signals 'finished' and 'started' to include their thread number.
I've focused quite a bit on the signals between the main gui, the threads, and the workers.
Similarly, others answers have been a pains to point out not parenting the QThread but I don't think this is a real concern. However, my code also is careful to destroy the QThread objects.
However, I wasn't able to parent the worker objects so it seems desirable to send them the deleteLater() signal, either when the thread function is finished or the GUI is destroyed. I've had my own code hang for not doing this.
Another enhancement I felt was necessary was was reimplement the closeEvent of the GUI (QWidget) such that the threads would be instructed to quit and then the GUI would wait until all the threads were finished. When I played with some of the other answers to this question, I got QThread destroyed errors.
Perhaps it will be useful to others. I certainly found it a useful exercise. Perhaps others will know a better way for a thread to announce it identity.
#!/usr/bin/env python3
#coding:utf-8
# Author: --<>
# Purpose: To demonstrate creation of multiple threads and identify the receipt of thread results
# Created: 19/12/15
import sys
from PyQt4.QtCore import QThread, pyqtSlot, pyqtSignal
from PyQt4.QtGui import QApplication, QLabel, QWidget, QGridLayout
import sys
import worker
class Thread(QThread):
#make new signals to be able to return an id for the thread
startedx = pyqtSignal(int)
finishedx = pyqtSignal(int)
def __init__(self,i,parent=None):
super().__init__(parent)
self.idd = i
self.started.connect(self.starttt)
self.finished.connect(self.finisheddd)
#pyqtSlot()
def starttt(self):
print('started signal from thread emitted')
self.startedx.emit(self.idd)
#pyqtSlot()
def finisheddd(self):
print('finished signal from thread emitted')
self.finishedx.emit(self.idd)
class Form(QWidget):
def __init__(self):
super().__init__()
self.initUI()
self.worker={}
self.threadx={}
self.i=0
i=0
#Establish the maximum number of threads the machine can optimally handle
#Generally relates to the number of processors
self.threadtest = QThread(self)
self.idealthreadcount = self.threadtest.idealThreadCount()
print("This machine can handle {} threads optimally".format(self.idealthreadcount))
while i <self.idealthreadcount:
self.setupThread(i)
i+=1
i=0
while i<self.idealthreadcount:
self.startThread(i)
i+=1
print("Main Gui running in thread {}.".format(self.thread()))
def setupThread(self,i):
self.worker[i]= worker.Worker(i) # no parent!
#print("Worker object runningt in thread {} prior to movetothread".format(self.worker[i].thread()) )
self.threadx[i] = Thread(i,parent=self) # if parent isn't specified then need to be careful to destroy thread
self.threadx[i].setObjectName("python thread{}"+str(i))
#print("Thread object runningt in thread {} prior to movetothread".format(self.threadx[i].thread()) )
self.threadx[i].startedx.connect(self.threadStarted)
self.threadx[i].finishedx.connect(self.threadFinished)
self.worker[i].finished.connect(self.workerFinished)
self.worker[i].intReady.connect(self.workerResultReady)
#The next line is optional, you may want to start the threads again without having to create all the code again.
self.worker[i].finished.connect(self.threadx[i].quit)
self.threadx[i].started.connect(self.worker[i].procCounter)
self.destroyed.connect(self.threadx[i].deleteLater)
self.destroyed.connect(self.worker[i].deleteLater)
#This is the key code that actually get the worker code onto another processor or thread.
self.worker[i].moveToThread(self.threadx[i])
def startThread(self,i):
self.threadx[i].start()
#pyqtSlot(int)
def threadStarted(self,i):
print('Thread {} started'.format(i))
print("Thread priority is {}".format(self.threadx[i].priority()))
#pyqtSlot(int)
def threadFinished(self,i):
print('Thread {} finished'.format(i))
#pyqtSlot(int)
def threadTerminated(self,i):
print("Thread {} terminated".format(i))
#pyqtSlot(int,int)
def workerResultReady(self,j,i):
print('Worker {} result returned'.format(i))
if i ==0:
self.label1.setText("{}".format(j))
if i ==1:
self.label2.setText("{}".format(j))
if i ==2:
self.label3.setText("{}".format(j))
if i ==3:
self.label4.setText("{}".format(j))
#print('Thread {} has started'.format(self.threadx[i].currentThreadId()))
#pyqtSlot(int)
def workerFinished(self,i):
print('Worker {} finished'.format(i))
def initUI(self):
self.label1 = QLabel("0")
self.label2= QLabel("0")
self.label3= QLabel("0")
self.label4 = QLabel("0")
grid = QGridLayout(self)
self.setLayout(grid)
grid.addWidget(self.label1,0,0)
grid.addWidget(self.label2,0,1)
grid.addWidget(self.label3,0,2)
grid.addWidget(self.label4,0,3) #Layout parents the self.labels
self.move(300, 150)
self.setGeometry(0,0,300,300)
#self.size(300,300)
self.setWindowTitle('thread test')
self.show()
def closeEvent(self, event):
print('Closing')
#this tells the threads to stop running
i=0
while i <self.idealthreadcount:
self.threadx[i].quit()
i+=1
#this ensures window cannot be closed until the threads have finished.
i=0
while i <self.idealthreadcount:
self.threadx[i].wait()
i+=1
event.accept()
if __name__=='__main__':
app = QApplication(sys.argv)
form = Form()
sys.exit(app.exec_())
And the worker code below
#!/usr/bin/env python3
#coding:utf-8
# Author: --<>
# Purpose: Stack Overflow
# Created: 19/12/15
import sys
import unittest
from PyQt4.QtCore import QThread, QObject, pyqtSignal, pyqtSlot
import time
import random
class Worker(QObject):
finished = pyqtSignal(int)
intReady = pyqtSignal(int,int)
def __init__(self, i=0):
'''__init__ is called while the worker is still in the Gui thread. Do not put slow or CPU intensive code in the __init__ method'''
super().__init__()
self.idd = i
#pyqtSlot()
def procCounter(self): # This slot takes no params
for j in range(1, 10):
random_time = random.weibullvariate(1,2)
time.sleep(random_time)
self.intReady.emit(j,self.idd)
print('Worker {0} in thread {1}'.format(self.idd, self.thread().idd))
self.finished.emit(self.idd)
if __name__=='__main__':
unittest.main()
PySide2 Solution:
Unlike in PyQt5, in PySide2 the QThread.started signal is received/handled on the original thread, not the worker thread! Luckily it still receives all other signals on the worker thread.
In order to match PyQt5's behavior, you have to create the started signal yourself.
Here is an easy solution:
# Use this class instead of QThread
class QThread2(QThread):
# Use this signal instead of "started"
started2 = Signal()
def __init__(self):
QThread.__init__(self)
self.started.connect(self.onStarted)
def onStarted(self):
self.started2.emit()
I have the following pyqtmain.py:
#!/usr/bin/python3
import sys
from PyQt4.QtCore import *
from PyQt4.QtGui import *
from pyqtMeasThread import *
class MainWindow(QMainWindow):
def __init__(self, parent=None):
self.qt_app = QApplication(sys.argv)
QMainWindow.__init__(self, parent)
buttonWidget = QWidget()
rsltLabel = QLabel("Result:")
self.rsltFiled = QLineEdit()
self.buttonStart = QPushButton("Start")
verticalLayout = QVBoxLayout(buttonWidget)
verticalLayout.addWidget(rsltLabel)
verticalLayout.addWidget(self.rsltFiled)
verticalLayout.addWidget(self.buttonStart)
butDW = QDockWidget("Control", self)
butDW.setWidget(buttonWidget)
self.addDockWidget(Qt.LeftDockWidgetArea, butDW)
self.mthread = QThread() # New thread to run the Measurement Engine
self.worker = MeasurementEngine() # Measurement Engine Object
self.worker.moveToThread(self.mthread)
self.mthread.finished.connect(self.worker.deleteLater) # Cleanup after thread finished
self.worker.measure_msg.connect(self.showRslt)
self.buttonStart.clicked.connect(self.worker.run)
# Everything configured, start the worker thread.
self.mthread.start()
def run(self):
""" Show the window and start the event loop """
self.show()
self.qt_app.exec_() # Start event loop
#pyqtSlot(str)
def showRslt(self, mystr):
self.rsltFiled.setText(mystr)
def main():
win = MainWindow()
win.run()
if __name__ == '__main__':
main()
And another thread script performing the actual measurement:
from PyQt4.QtCore import *
import time
class MeasurementEngine(QObject):
measure_msg = pyqtSignal(str)
def __init__(self):
QObject.__init__(self) # Don't forget to call base class constructor
#pyqtSlot()
def run(self):
self.measure_msg.emit('phase1')
time.sleep(2) # here I would like to make it as an interrupt
self.measure_msg.emit('phase2')
What this code does now is that after the Start button is pressed, the function run in the thread will be executed. However, actually in the function run, there are two phases of the measurement. Right now I used an time delay.
But what I would like to implement actually is that after the 'phase1' measurement is done. A message box will be popped up, and at the same time, the thread will be paused/held. Until the user closed the message box, then the thread function will be resumed.
Use a QWaitCondition from the QtCore module. Using a mutex lock, you set the background thread to wait/sleep until the foreground thread wakes it back up. Then it will continue doing its work from there.
#!/usr/bin/python3
import sys
from PyQt4.QtCore import *
from PyQt4.QtGui import *
from pyqtMeasThread import *
class MainWindow(QMainWindow):
def __init__(self, parent=None):
self.qt_app = QApplication(sys.argv)
QMainWindow.__init__(self, parent)
buttonWidget = QWidget()
rsltLabel = QLabel("Result:")
self.rsltFiled = QLineEdit()
self.buttonStart = QPushButton("Start")
verticalLayout = QVBoxLayout(buttonWidget)
verticalLayout.addWidget(rsltLabel)
verticalLayout.addWidget(self.rsltFiled)
verticalLayout.addWidget(self.buttonStart)
butDW = QDockWidget("Control", self)
butDW.setWidget(buttonWidget)
self.addDockWidget(Qt.LeftDockWidgetArea, butDW)
self.mutex = QMutex()
self.cond = QWaitCondition()
self.mthread = QThread() # New thread to run the Measurement Engine
self.worker = MeasurementEngine(self.mutex, self.cond) # Measurement Engine Object
self.worker.moveToThread(self.mthread)
self.mthread.finished.connect(self.worker.deleteLater) # Cleanup after thread finished
self.worker.measure_msg.connect(self.showRslt)
self.buttonStart.clicked.connect(self.worker.run)
# Everything configured, start the worker thread.
self.mthread.start()
def run(self):
""" Show the window and start the event loop """
self.show()
self.qt_app.exec_() # Start event loop
# since this is a slot, it will always get run in the event loop in the main thread
#pyqtSlot(str)
def showRslt(self, mystr):
self.rsltFiled.setText(mystr)
msgBox = QMessageBox(parent=self)
msgBox.setText("Close this dialog to continue to Phase 2.")
msgBox.exec_()
self.cond.wakeAll()
def main():
win = MainWindow()
win.run()
if __name__ == '__main__':
main()
And:
from PyQt4.QtCore import *
import time
class MeasurementEngine(QObject):
measure_msg = pyqtSignal(str)
def __init__(self, mutex, cond):
QObject.__init__(self) # Don't forget to call base class constructor
self.mtx = mutex
self.cond = cond
#pyqtSlot()
def run(self):
# NOTE: do work for phase 1 here
self.measure_msg.emit('phase1')
self.mtx.lock()
try:
self.cond.wait(self.mtx)
# NOTE: do work for phase 2 here
self.measure_msg.emit('phase2')
finally:
self.mtx.unlock()
Your timing is a little bit off in all this though. You create the app and start the thread before you even show your window. Thus, the message box will pop up before the main window even pops up. To get the right sequence of events, you should start your thread as part of the run method of your MainWindow, after you have already made the main window visible. If you want the wait condition to be separate from the setting of the messages, you may need a separate signal and slot to deal with that.
You can't display a QDialog from within a QThread. All GUI related stuff must be done in the GUI thread (the one that created the QApplication object). What you could do is to use 2 QThread:
1st: perform phase1. You can connect the finished signal of this QThread to a slot in the QMainWindow that will display the popup (using QDialog.exec_() so it will be modal).
2nd: perform phase2. You create the QThread after the popup shown here above has been closed.
Your thread can emit a signal to the main window to show the dialog.
If you don't want to close the thread while the dialog is open, the thread could enter a while loop for waiting. In the while loop it can continuously check a variable which the main thread can set to true after the dialog is finished.
This might not be the cleanest solution, but it should work.
To clarify my answer a bit, I added some pseudo code. What you have to care about is how you share the dialog_closed variable. You could e.g. use a member variable of the thread class.
Thread:
emit_signal
dialog_closed = False
while not dialog_closed:
pass
go_on_with_processing
MainThread:
def SignalRecieved():
open_dialog
dialog_closed = True
I recently had to solve pretty much this problem, did a little research and discovered an elegant technique that seems to work reliably. I didn't need the full complexity detailed there, so here's an outline of the steps I took.
My GUI class defines, as class attributes, two signals.
oyn_sig = pyqtSignal(str) # Request for operator yes/no
ryn_sig = pyqtSignal(bool) # Response to yes/no request
Inside the method that initialises the GUI components this signal is connected to the GUI instance's signal handler.
self.oyn_sig.connect(self.operator_yes_no)
Here's the code for the handler method of the GUI:
#pyqtSlot(str)
def operator_yes_no(self, msg):
"Asks the user a `yes/no question on receipt of a signal then signal a bool answer.`"
answer = QMessageBox.question(None,
"Confirm Test Sucess",
msg,
QMessageBox.Yes | QMessageBox.No, QMessageBox.No)
# Signal the caller that the result was received.
self.ryn_sig.emit(answer==QMessageBox.Yes)
As usual the GUI is running in the main thread, and so it needs to be signalled from the thread doing the work in the background. In turn, once it's received the operator's response it raises a response signal to the originating thread.
The worker thread uses the following function to get an operator response.
def operator_yes_no(self, msg):
loop = LoopSpinner(self.gui, msg)
loop.exec_()
return loop.result
This creates a LoopSpinner object and starts executing its event loop, thereby suspend the current thread's event loop until the "inner thread" terminates. Most of the smarts are hidden inside the LoopSpinner class, which should probably have been better named. Here's its definition.
class LoopSpinner(QEventLoop):
def __init__(self, gui, msg):
"Ask for an answer and communicate the result."
QEventLoop.__init__(self)
gui.ryn_sig.connect(self.get_answer)
gui.oyn_sig.emit(msg)
#pyqtSlot(bool)
def get_answer(self, result):
self.result = result
self.quit()
A LoopSpinner instance connects the response signal to its get_answer method and emits the question signal. When the signal is received the answer is stored as an attribute value and the loop quits. The loop is still referenced by its caller, which can safely access the result attribute before the instance is garbage collected.
I'm in the process of writing my very first GUI application with PyQt4 and I've come upon a question that seems very basic, yet I don't seem to find a good answer:
I'm using a thread to continuously perform a repeated task without blocking the main window. The thread needs some information from the main window (e.g. the current value of a spinbox) that can also change during the runtime of the thread. In this situation, what is the proper way to share such data between the main window and the thread?
Naively, I could come up with the following possibilities:
Pass a reference to the host window to the thread and use this to retrieve the current value of the variable in question (see example below).
Keep a copy of the variable in the thread and keep it synchronized with the main window by emitting signals whenever it changes.
Use global variables.
All three options would most likely work for my particular use case (though 2 would be a bit complicated), but I have a feeling there should be a better/more Pythonic/more Qt-like way.
Here is a minimum working example illustrating what I want to do, in this case using option 1:
from PyQt4 import QtGui, QtCore
import time, sys
class MainWindow(QtGui.QWidget):
def __init__(self):
super(MainWindow, self).__init__()
self.layout = QtGui.QVBoxLayout(self)
self.spinbox = QtGui.QSpinBox(self)
self.spinbox.setValue(1)
self.layout.addWidget(self.spinbox)
self.output = QtGui.QLCDNumber(self)
self.layout.addWidget(self.output)
self.worker = Worker(self)
self.connect(self.worker, QtCore.SIGNAL('beep'), self.update)
self.worker.start()
def update(self, number):
self.output.display(number)
class Worker(QtCore.QThread):
def __init__(self, host_window):
super(Worker, self).__init__()
self.host = host_window
self.running = False
def run(self):
self.running = True
i = 0
while self.running:
i += 1
self.emit(QtCore.SIGNAL('beep'), i)
sleep_time = self.host.spinbox.value()
time.sleep(sleep_time)
def stop(self):
self.running = False
app = QtGui.QApplication(sys.argv)
window = MainWindow()
window.show()
app.exec_()
PS: Since I'm completely unexperienced with PyQt it's not unlikely that there are other problems with the code or the question is unclear. In this case, please feel free to comment or edit the question.
Widgets are not thread safe, see Threads and QObjects:
Although QObject is reentrant, the GUI classes, notably QWidget and
all its subclasses, are not reentrant. They can only be used from the
main thread.
And see more definitions here: Reentrancy and Thread-Safety
You should only use widgets in the main thread, and use signal and slots to communicate with other threads.
I don't think a global variable would work, but I honestly don't know why.
How to use signals in this example:
#in main
self.worker = Worker(self.spinbox.value())
self.worker.beep.connect(self.update)
self.spinbox.valueChanged.connect(self.worker.update_value)
class Worker(QtCore.QThread):
beep=QtCore.pyqtSignal(int)
def __init__(self,sleep_time):
super(Worker, self).__init__()
self.running = False
self.sleep_time=sleep_time
def run(self):
self.running = True
i = 0
while self.running:
i += 1
self.beep.emit(i)
time.sleep(self.sleep_time)
def stop(self):
self.running = False
def update_value(self,value):
self.sleep_time=value
NB: I use the new style signal and slots
I am trying to understand how to use signaling from a Qthread back to the Gui interface that started.
Setup: I have a process (a simulation) that needs to run almost indefinitely (or at least for very long stretches of time)., While it runs, it carries out various computations, amd some of the results must be sent back to the GUI, which will display them appropriately in real time.
I am using PyQt for the GUI. I originally tried using python's threading module, then switched to QThreads after reading several posts both here on SO and elsewhere.
According to this post on the Qt Blog You're doing it wrong, the preferred way to use QThread is by creating a QObject and then moving it to a Qthread. So I followed the advice inBackground thread with QThread in PyQt"> this SO question and tried a simple test app (code below): it opens up a simple GUI, let you start the background process, and it issupposed to update the step value in a spinbox.
But it does not work. The GUI is never updated. What am I doing wrong?
import time, sys
from PyQt4.QtCore import *
from PyQt4.QtGui import *
class SimulRunner(QObject):
'Object managing the simulation'
stepIncreased = pyqtSignal(int, name = 'stepIncreased')
def __init__(self):
super(SimulRunner, self).__init__()
self._step = 0
self._isRunning = True
self._maxSteps = 20
def longRunning(self):
while self._step < self._maxSteps and self._isRunning == True:
self._step += 1
self.stepIncreased.emit(self._step)
time.sleep(0.1)
def stop(self):
self._isRunning = False
class SimulationUi(QDialog):
'PyQt interface'
def __init__(self):
super(SimulationUi, self).__init__()
self.goButton = QPushButton('Go')
self.stopButton = QPushButton('Stop')
self.currentStep = QSpinBox()
self.layout = QHBoxLayout()
self.layout.addWidget(self.goButton)
self.layout.addWidget(self.stopButton)
self.layout.addWidget(self.currentStep)
self.setLayout(self.layout)
self.simulRunner = SimulRunner()
self.simulThread = QThread()
self.simulRunner.moveToThread(self.simulThread)
self.simulRunner.stepIncreased.connect(self.currentStep.setValue)
self.connect(self.stopButton, SIGNAL('clicked()'), self.simulRunner.stop)
self.connect(self.goButton, SIGNAL('clicked()'), self.simulThread.start)
self.connect(self.simulRunner,SIGNAL('stepIncreased'), self.currentStep.setValue)
if __name__ == '__main__':
app = QApplication(sys.argv)
simul = SimulationUi()
simul.show()
sys.exit(app.exec_())
The problem here is simple: your SimulRunner never gets sent a signal that causes it to start its work. One way of doing that would be to connect it to the started signal of the Thread.
Also, in python you should use the new-style way of connecting signals:
...
self.simulRunner = SimulRunner()
self.simulThread = QThread()
self.simulRunner.moveToThread(self.simulThread)
self.simulRunner.stepIncreased.connect(self.currentStep.setValue)
self.stopButton.clicked.connect(self.simulRunner.stop)
self.goButton.clicked.connect(self.simulThread.start)
# start the execution loop with the thread:
self.simulThread.started.connect(self.simulRunner.longRunning)
...
I have a program which interfaces with a radio I am using via a gui I wrote in PyQt. Obviously one of the main functions of the radio is to transmit data, but to do this continuously, I have to loop the writes, which causes the gui to hang. Since I have never dealt with threading, I tried to get rid of these hangs using QCoreApplication.processEvents(). The radio needs to sleep between transmissions, though, so the gui still hangs based on how long these sleeps last.
Is there a simple way to fix this using QThread? I have looked for tutorials on how to implement multithreading with PyQt, but most of them deal with setting up servers and are much more advanced than I need them to be. I honestly don't even really need my thread to update anything while it is running, I just need to start it, have it transmit in the background, and stop it.
I created a little example that shows 3 different and simple ways of dealing with threads. I hope it will help you find the right approach to your problem.
import sys
import time
from PyQt5.QtCore import (QCoreApplication, QObject, QRunnable, QThread,
QThreadPool, pyqtSignal)
# Subclassing QThread
# http://qt-project.org/doc/latest/qthread.html
class AThread(QThread):
def run(self):
count = 0
while count < 5:
time.sleep(1)
print("A Increasing")
count += 1
# Subclassing QObject and using moveToThread
# http://blog.qt.digia.com/blog/2007/07/05/qthreads-no-longer-abstract
class SomeObject(QObject):
finished = pyqtSignal()
def long_running(self):
count = 0
while count < 5:
time.sleep(1)
print("B Increasing")
count += 1
self.finished.emit()
# Using a QRunnable
# http://qt-project.org/doc/latest/qthreadpool.html
# Note that a QRunnable isn't a subclass of QObject and therefore does
# not provide signals and slots.
class Runnable(QRunnable):
def run(self):
count = 0
app = QCoreApplication.instance()
while count < 5:
print("C Increasing")
time.sleep(1)
count += 1
app.quit()
def using_q_thread():
app = QCoreApplication([])
thread = AThread()
thread.finished.connect(app.exit)
thread.start()
sys.exit(app.exec_())
def using_move_to_thread():
app = QCoreApplication([])
objThread = QThread()
obj = SomeObject()
obj.moveToThread(objThread)
obj.finished.connect(objThread.quit)
objThread.started.connect(obj.long_running)
objThread.finished.connect(app.exit)
objThread.start()
sys.exit(app.exec_())
def using_q_runnable():
app = QCoreApplication([])
runnable = Runnable()
QThreadPool.globalInstance().start(runnable)
sys.exit(app.exec_())
if __name__ == "__main__":
#using_q_thread()
#using_move_to_thread()
using_q_runnable()
Take this answer updated for PyQt5, python 3.4
Use this as a pattern to start a worker that does not take data and return data as they are available to the form.
1 - Worker class is made smaller and put in its own file worker.py for easy memorization and independent software reuse.
2 - The main.py file is the file that defines the GUI Form class
3 - The thread object is not subclassed.
4 - Both thread object and the worker object belong to the Form object
5 - Steps of the procedure are within the comments.
# worker.py
from PyQt5.QtCore import QThread, QObject, pyqtSignal, pyqtSlot
import time
class Worker(QObject):
finished = pyqtSignal()
intReady = pyqtSignal(int)
#pyqtSlot()
def procCounter(self): # A slot takes no params
for i in range(1, 100):
time.sleep(1)
self.intReady.emit(i)
self.finished.emit()
And the main file is:
# main.py
from PyQt5.QtCore import QThread
from PyQt5.QtWidgets import QApplication, QLabel, QWidget, QGridLayout
import sys
import worker
class Form(QWidget):
def __init__(self):
super().__init__()
self.label = QLabel("0")
# 1 - create Worker and Thread inside the Form
self.obj = worker.Worker() # no parent!
self.thread = QThread() # no parent!
# 2 - Connect Worker`s Signals to Form method slots to post data.
self.obj.intReady.connect(self.onIntReady)
# 3 - Move the Worker object to the Thread object
self.obj.moveToThread(self.thread)
# 4 - Connect Worker Signals to the Thread slots
self.obj.finished.connect(self.thread.quit)
# 5 - Connect Thread started signal to Worker operational slot method
self.thread.started.connect(self.obj.procCounter)
# * - Thread finished signal will close the app if you want!
#self.thread.finished.connect(app.exit)
# 6 - Start the thread
self.thread.start()
# 7 - Start the form
self.initUI()
def initUI(self):
grid = QGridLayout()
self.setLayout(grid)
grid.addWidget(self.label,0,0)
self.move(300, 150)
self.setWindowTitle('thread test')
self.show()
def onIntReady(self, i):
self.label.setText("{}".format(i))
#print(i)
app = QApplication(sys.argv)
form = Form()
sys.exit(app.exec_())
According to the Qt developers, subclassing QThread is incorrect (see http://blog.qt.io/blog/2010/06/17/youre-doing-it-wrong/). But that article is really hard to understand (plus the title is a bit condescending). I found a better blog post that gives a more detailed explanation about why you should use one style of threading over another: http://mayaposch.wordpress.com/2011/11/01/how-to-really-truly-use-qthreads-the-full-explanation/
Also, I would highly recommend this video from KDAB on signals and slots between threads.
In my opinion, you should probably never subclass thread with the intent to overload the run method. While that does work, you're basically circumventing how Qt wants you to work. Plus you'll miss out on things like events and proper thread safe signals and slots. Plus as you'll likely see in the above blog post, the "correct" way of threading forces you to write more testable code.
Here's a couple of examples of how to take advantage of QThreads in PyQt (I posted a separate answer below that properly uses QRunnable and incorporates signals/slots, that answer is better if you have a lot of async tasks that you need to load balance).
import sys
from PyQt4 import QtCore
from PyQt4 import QtGui
from PyQt4.QtCore import Qt
# very testable class (hint: you can use mock.Mock for the signals)
class Worker(QtCore.QObject):
finished = QtCore.pyqtSignal()
dataReady = QtCore.pyqtSignal(list, dict)
#QtCore.pyqtSlot()
def processA(self):
print "Worker.processA()"
self.finished.emit()
#QtCore.pyqtSlot(str, list, list)
def processB(self, foo, bar=None, baz=None):
print "Worker.processB()"
for thing in bar:
# lots of processing...
self.dataReady.emit(['dummy', 'data'], {'dummy': ['data']})
self.finished.emit()
class Thread(QtCore.QThread):
"""Need for PyQt4 <= 4.6 only"""
def __init__(self, parent=None):
QtCore.QThread.__init__(self, parent)
# this class is solely needed for these two methods, there
# appears to be a bug in PyQt 4.6 that requires you to
# explicitly call run and start from the subclass in order
# to get the thread to actually start an event loop
def start(self):
QtCore.QThread.start(self)
def run(self):
QtCore.QThread.run(self)
app = QtGui.QApplication(sys.argv)
thread = Thread() # no parent!
obj = Worker() # no parent!
obj.moveToThread(thread)
# if you want the thread to stop after the worker is done
# you can always call thread.start() again later
obj.finished.connect(thread.quit)
# one way to do it is to start processing as soon as the thread starts
# this is okay in some cases... but makes it harder to send data to
# the worker object from the main gui thread. As you can see I'm calling
# processA() which takes no arguments
thread.started.connect(obj.processA)
thread.start()
# another way to do it, which is a bit fancier, allows you to talk back and
# forth with the object in a thread safe way by communicating through signals
# and slots (now that the thread is running I can start calling methods on
# the worker object)
QtCore.QMetaObject.invokeMethod(obj, 'processB', Qt.QueuedConnection,
QtCore.Q_ARG(str, "Hello World!"),
QtCore.Q_ARG(list, ["args", 0, 1]),
QtCore.Q_ARG(list, []))
# that looks a bit scary, but its a totally ok thing to do in Qt,
# we're simply using the system that Signals and Slots are built on top of,
# the QMetaObject, to make it act like we safely emitted a signal for
# the worker thread to pick up when its event loop resumes (so if its doing
# a bunch of work you can call this method 10 times and it will just queue
# up the calls. Note: PyQt > 4.6 will not allow you to pass in a None
# instead of an empty list, it has stricter type checking
app.exec_()
# Without this you may get weird QThread messages in the shell on exit
app.deleteLater()
Very nice example from Matt, I fixed the typo and also pyqt4.8 is common now so I removed the dummy class as well and added an example for the dataReady signal
# -*- coding: utf-8 -*-
import sys
from PyQt4 import QtCore, QtGui
from PyQt4.QtCore import Qt
# very testable class (hint: you can use mock.Mock for the signals)
class Worker(QtCore.QObject):
finished = QtCore.pyqtSignal()
dataReady = QtCore.pyqtSignal(list, dict)
#QtCore.pyqtSlot()
def processA(self):
print "Worker.processA()"
self.finished.emit()
#QtCore.pyqtSlot(str, list, list)
def processB(self, foo, bar=None, baz=None):
print "Worker.processB()"
for thing in bar:
# lots of processing...
self.dataReady.emit(['dummy', 'data'], {'dummy': ['data']})
self.finished.emit()
def onDataReady(aList, aDict):
print 'onDataReady'
print repr(aList)
print repr(aDict)
app = QtGui.QApplication(sys.argv)
thread = QtCore.QThread() # no parent!
obj = Worker() # no parent!
obj.dataReady.connect(onDataReady)
obj.moveToThread(thread)
# if you want the thread to stop after the worker is done
# you can always call thread.start() again later
obj.finished.connect(thread.quit)
# one way to do it is to start processing as soon as the thread starts
# this is okay in some cases... but makes it harder to send data to
# the worker object from the main gui thread. As you can see I'm calling
# processA() which takes no arguments
thread.started.connect(obj.processA)
thread.finished.connect(app.exit)
thread.start()
# another way to do it, which is a bit fancier, allows you to talk back and
# forth with the object in a thread safe way by communicating through signals
# and slots (now that the thread is running I can start calling methods on
# the worker object)
QtCore.QMetaObject.invokeMethod(obj, 'processB', Qt.QueuedConnection,
QtCore.Q_ARG(str, "Hello World!"),
QtCore.Q_ARG(list, ["args", 0, 1]),
QtCore.Q_ARG(list, []))
# that looks a bit scary, but its a totally ok thing to do in Qt,
# we're simply using the system that Signals and Slots are built on top of,
# the QMetaObject, to make it act like we safely emitted a signal for
# the worker thread to pick up when its event loop resumes (so if its doing
# a bunch of work you can call this method 10 times and it will just queue
# up the calls. Note: PyQt > 4.6 will not allow you to pass in a None
# instead of an empty list, it has stricter type checking
app.exec_()
In PyQt there are a lot of options for getting asynchronous behavior. For things that need event processing (ie. QtNetwork, etc) you should use the QThread example I provided in my other answer on this thread. But for the vast majority of your threading needs, I think this solution is far superior than the other methods.
The advantage of this is that the QThreadPool schedules your QRunnable instances as tasks. This is similar to the task pattern used in Intel's TBB. It's not quite as elegant as I like but it does pull off excellent asynchronous behavior.
This allows you to utilize most of the threading power of Qt in Python via QRunnable and still take advantage of signals and slots. I use this same code in several applications, some that make hundreds of asynchronous REST calls, some that open files or list directories, and the best part is using this method, Qt task balances the system resources for me.
import time
from PyQt4 import QtCore
from PyQt4 import QtGui
from PyQt4.QtCore import Qt
def async(method, args, uid, readycb, errorcb=None):
"""
Asynchronously runs a task
:param func method: the method to run in a thread
:param object uid: a unique identifier for this task (used for verification)
:param slot updatecb: the callback when data is receieved cb(uid, data)
:param slot errorcb: the callback when there is an error cb(uid, errmsg)
The uid option is useful when the calling code makes multiple async calls
and the callbacks need some context about what was sent to the async method.
For example, if you use this method to thread a long running database call
and the user decides they want to cancel it and start a different one, the
first one may complete before you have a chance to cancel the task. In that
case, the "readycb" will be called with the cancelled task's data. The uid
can be used to differentiate those two calls (ie. using the sql query).
:returns: Request instance
"""
request = Request(method, args, uid, readycb, errorcb)
QtCore.QThreadPool.globalInstance().start(request)
return request
class Request(QtCore.QRunnable):
"""
A Qt object that represents an asynchronous task
:param func method: the method to call
:param list args: list of arguments to pass to method
:param object uid: a unique identifier (used for verification)
:param slot readycb: the callback used when data is receieved
:param slot errorcb: the callback used when there is an error
The uid param is sent to your error and update callbacks as the
first argument. It's there to verify the data you're returning
After created it should be used by invoking:
.. code-block:: python
task = Request(...)
QtCore.QThreadPool.globalInstance().start(task)
"""
INSTANCES = []
FINISHED = []
def __init__(self, method, args, uid, readycb, errorcb=None):
super(Request, self).__init__()
self.setAutoDelete(True)
self.cancelled = False
self.method = method
self.args = args
self.uid = uid
self.dataReady = readycb
self.dataError = errorcb
Request.INSTANCES.append(self)
# release all of the finished tasks
Request.FINISHED = []
def run(self):
"""
Method automatically called by Qt when the runnable is ready to run.
This will run in a separate thread.
"""
# this allows us to "cancel" queued tasks if needed, should be done
# on shutdown to prevent the app from hanging
if self.cancelled:
self.cleanup()
return
# runs in a separate thread, for proper async signal/slot behavior
# the object that emits the signals must be created in this thread.
# Its not possible to run grabber.moveToThread(QThread.currentThread())
# so to get this QObject to properly exhibit asynchronous
# signal and slot behavior it needs to live in the thread that
# we're running in, creating the object from within this thread
# is an easy way to do that.
grabber = Requester()
grabber.Loaded.connect(self.dataReady, Qt.QueuedConnection)
if self.dataError is not None:
grabber.Error.connect(self.dataError, Qt.QueuedConnection)
try:
result = self.method(*self.args)
if self.cancelled:
# cleanup happens in 'finally' statement
return
grabber.Loaded.emit(self.uid, result)
except Exception as error:
if self.cancelled:
# cleanup happens in 'finally' statement
return
grabber.Error.emit(self.uid, unicode(error))
finally:
# this will run even if one of the above return statements
# is executed inside of the try/except statement see:
# https://docs.python.org/2.7/tutorial/errors.html#defining-clean-up-actions
self.cleanup(grabber)
def cleanup(self, grabber=None):
# remove references to any object or method for proper ref counting
self.method = None
self.args = None
self.uid = None
self.dataReady = None
self.dataError = None
if grabber is not None:
grabber.deleteLater()
# make sure this python obj gets cleaned up
self.remove()
def remove(self):
try:
Request.INSTANCES.remove(self)
# when the next request is created, it will clean this one up
# this will help us avoid this object being cleaned up
# when it's still being used
Request.FINISHED.append(self)
except ValueError:
# there might be a race condition on shutdown, when shutdown()
# is called while the thread is still running and the instance
# has already been removed from the list
return
#staticmethod
def shutdown():
for inst in Request.INSTANCES:
inst.cancelled = True
Request.INSTANCES = []
Request.FINISHED = []
class Requester(QtCore.QObject):
"""
A simple object designed to be used in a separate thread to allow
for asynchronous data fetching
"""
#
# Signals
#
Error = QtCore.pyqtSignal(object, unicode)
"""
Emitted if the fetch fails for any reason
:param unicode uid: an id to identify this request
:param unicode error: the error message
"""
Loaded = QtCore.pyqtSignal(object, object)
"""
Emitted whenever data comes back successfully
:param unicode uid: an id to identify this request
:param list data: the json list returned from the GET
"""
NetworkConnectionError = QtCore.pyqtSignal(unicode)
"""
Emitted when the task fails due to a network connection error
:param unicode message: network connection error message
"""
def __init__(self, parent=None):
super(Requester, self).__init__(parent)
class ExampleObject(QtCore.QObject):
def __init__(self, parent=None):
super(ExampleObject, self).__init__(parent)
self.uid = 0
self.request = None
def ready_callback(self, uid, result):
if uid != self.uid:
return
print "Data ready from %s: %s" % (uid, result)
def error_callback(self, uid, error):
if uid != self.uid:
return
print "Data error from %s: %s" % (uid, error)
def fetch(self):
if self.request is not None:
# cancel any pending requests
self.request.cancelled = True
self.request = None
self.uid += 1
self.request = async(slow_method, ["arg1", "arg2"], self.uid,
self.ready_callback,
self.error_callback)
def slow_method(arg1, arg2):
print "Starting slow method"
time.sleep(1)
return arg1 + arg2
if __name__ == "__main__":
import sys
app = QtGui.QApplication(sys.argv)
obj = ExampleObject()
dialog = QtGui.QDialog()
layout = QtGui.QVBoxLayout(dialog)
button = QtGui.QPushButton("Generate", dialog)
progress = QtGui.QProgressBar(dialog)
progress.setRange(0, 0)
layout.addWidget(button)
layout.addWidget(progress)
button.clicked.connect(obj.fetch)
dialog.show()
app.exec_()
app.deleteLater() # avoids some QThread messages in the shell on exit
# cancel all running tasks avoid QThread/QTimer error messages
# on exit
Request.shutdown()
When exiting the application you'll want to make sure you cancel all of the tasks or the application will hang until every scheduled task has completed
Based on the Worker objects methods mentioned in other answers, I decided to see if I could expand on the solution to invoke more threads - in this case the optimal number the machine can run and spin up multiple workers with indeterminate completion times.
To do this I still need to subclass QThread - but only to assign a thread number and to 'reimplement' the signals 'finished' and 'started' to include their thread number.
I've focused quite a bit on the signals between the main gui, the threads, and the workers.
Similarly, others answers have been a pains to point out not parenting the QThread but I don't think this is a real concern. However, my code also is careful to destroy the QThread objects.
However, I wasn't able to parent the worker objects so it seems desirable to send them the deleteLater() signal, either when the thread function is finished or the GUI is destroyed. I've had my own code hang for not doing this.
Another enhancement I felt was necessary was was reimplement the closeEvent of the GUI (QWidget) such that the threads would be instructed to quit and then the GUI would wait until all the threads were finished. When I played with some of the other answers to this question, I got QThread destroyed errors.
Perhaps it will be useful to others. I certainly found it a useful exercise. Perhaps others will know a better way for a thread to announce it identity.
#!/usr/bin/env python3
#coding:utf-8
# Author: --<>
# Purpose: To demonstrate creation of multiple threads and identify the receipt of thread results
# Created: 19/12/15
import sys
from PyQt4.QtCore import QThread, pyqtSlot, pyqtSignal
from PyQt4.QtGui import QApplication, QLabel, QWidget, QGridLayout
import sys
import worker
class Thread(QThread):
#make new signals to be able to return an id for the thread
startedx = pyqtSignal(int)
finishedx = pyqtSignal(int)
def __init__(self,i,parent=None):
super().__init__(parent)
self.idd = i
self.started.connect(self.starttt)
self.finished.connect(self.finisheddd)
#pyqtSlot()
def starttt(self):
print('started signal from thread emitted')
self.startedx.emit(self.idd)
#pyqtSlot()
def finisheddd(self):
print('finished signal from thread emitted')
self.finishedx.emit(self.idd)
class Form(QWidget):
def __init__(self):
super().__init__()
self.initUI()
self.worker={}
self.threadx={}
self.i=0
i=0
#Establish the maximum number of threads the machine can optimally handle
#Generally relates to the number of processors
self.threadtest = QThread(self)
self.idealthreadcount = self.threadtest.idealThreadCount()
print("This machine can handle {} threads optimally".format(self.idealthreadcount))
while i <self.idealthreadcount:
self.setupThread(i)
i+=1
i=0
while i<self.idealthreadcount:
self.startThread(i)
i+=1
print("Main Gui running in thread {}.".format(self.thread()))
def setupThread(self,i):
self.worker[i]= worker.Worker(i) # no parent!
#print("Worker object runningt in thread {} prior to movetothread".format(self.worker[i].thread()) )
self.threadx[i] = Thread(i,parent=self) # if parent isn't specified then need to be careful to destroy thread
self.threadx[i].setObjectName("python thread{}"+str(i))
#print("Thread object runningt in thread {} prior to movetothread".format(self.threadx[i].thread()) )
self.threadx[i].startedx.connect(self.threadStarted)
self.threadx[i].finishedx.connect(self.threadFinished)
self.worker[i].finished.connect(self.workerFinished)
self.worker[i].intReady.connect(self.workerResultReady)
#The next line is optional, you may want to start the threads again without having to create all the code again.
self.worker[i].finished.connect(self.threadx[i].quit)
self.threadx[i].started.connect(self.worker[i].procCounter)
self.destroyed.connect(self.threadx[i].deleteLater)
self.destroyed.connect(self.worker[i].deleteLater)
#This is the key code that actually get the worker code onto another processor or thread.
self.worker[i].moveToThread(self.threadx[i])
def startThread(self,i):
self.threadx[i].start()
#pyqtSlot(int)
def threadStarted(self,i):
print('Thread {} started'.format(i))
print("Thread priority is {}".format(self.threadx[i].priority()))
#pyqtSlot(int)
def threadFinished(self,i):
print('Thread {} finished'.format(i))
#pyqtSlot(int)
def threadTerminated(self,i):
print("Thread {} terminated".format(i))
#pyqtSlot(int,int)
def workerResultReady(self,j,i):
print('Worker {} result returned'.format(i))
if i ==0:
self.label1.setText("{}".format(j))
if i ==1:
self.label2.setText("{}".format(j))
if i ==2:
self.label3.setText("{}".format(j))
if i ==3:
self.label4.setText("{}".format(j))
#print('Thread {} has started'.format(self.threadx[i].currentThreadId()))
#pyqtSlot(int)
def workerFinished(self,i):
print('Worker {} finished'.format(i))
def initUI(self):
self.label1 = QLabel("0")
self.label2= QLabel("0")
self.label3= QLabel("0")
self.label4 = QLabel("0")
grid = QGridLayout(self)
self.setLayout(grid)
grid.addWidget(self.label1,0,0)
grid.addWidget(self.label2,0,1)
grid.addWidget(self.label3,0,2)
grid.addWidget(self.label4,0,3) #Layout parents the self.labels
self.move(300, 150)
self.setGeometry(0,0,300,300)
#self.size(300,300)
self.setWindowTitle('thread test')
self.show()
def closeEvent(self, event):
print('Closing')
#this tells the threads to stop running
i=0
while i <self.idealthreadcount:
self.threadx[i].quit()
i+=1
#this ensures window cannot be closed until the threads have finished.
i=0
while i <self.idealthreadcount:
self.threadx[i].wait()
i+=1
event.accept()
if __name__=='__main__':
app = QApplication(sys.argv)
form = Form()
sys.exit(app.exec_())
And the worker code below
#!/usr/bin/env python3
#coding:utf-8
# Author: --<>
# Purpose: Stack Overflow
# Created: 19/12/15
import sys
import unittest
from PyQt4.QtCore import QThread, QObject, pyqtSignal, pyqtSlot
import time
import random
class Worker(QObject):
finished = pyqtSignal(int)
intReady = pyqtSignal(int,int)
def __init__(self, i=0):
'''__init__ is called while the worker is still in the Gui thread. Do not put slow or CPU intensive code in the __init__ method'''
super().__init__()
self.idd = i
#pyqtSlot()
def procCounter(self): # This slot takes no params
for j in range(1, 10):
random_time = random.weibullvariate(1,2)
time.sleep(random_time)
self.intReady.emit(j,self.idd)
print('Worker {0} in thread {1}'.format(self.idd, self.thread().idd))
self.finished.emit(self.idd)
if __name__=='__main__':
unittest.main()
PySide2 Solution:
Unlike in PyQt5, in PySide2 the QThread.started signal is received/handled on the original thread, not the worker thread! Luckily it still receives all other signals on the worker thread.
In order to match PyQt5's behavior, you have to create the started signal yourself.
Here is an easy solution:
# Use this class instead of QThread
class QThread2(QThread):
# Use this signal instead of "started"
started2 = Signal()
def __init__(self):
QThread.__init__(self)
self.started.connect(self.onStarted)
def onStarted(self):
self.started2.emit()