My program should print the sum from even numbers from 2 to 10, but when I pass even_while() in the shell I don't see any result. Which is the problem?
def even_while():
number = 2
s = 0
while number < 10:
if number % 2 == 0:
old_number = number
number = number + 1
s = s + old_number
print(s)
Thanks!
"Infinite loop". number starts as 2. That's even, so add 1 to it. That leaves number as 3. Now the while loop goes around "forever". number % 2 == 0 is never true (number is 3!), and number never changes again.
You don't increment number unless number % 2 == 0, so the while loop doesn't make any progress.
Additionally, you might enjoy the range builtin:
def even_while():
s = 0
for number in range(2, 10):
if number % 2 == 0:
old_number = number
s = s + old_number
print(s)
def even_while():
number = 0
s = 0
while number < 11:
number = number + 1
if number % 2 == 0:
old_number = number
s = s + old_number
print(s)
I think this is ok.
Related
lower = int(input("Enter lower range limit:"))
upper = int(input("Enter upper b range limit:"))
Count = 0
for i in range(lower, upper+1):
if((i%3==0) & (i%5==0)):
Count += 1
print(count)
I want to print 100 values which are divisible by 3 and 5, but in count only 7 is showing, can anyone suggest what to do, it will be appreciated!
Use this
num = int(input("How many Numbers you want :"))
i=0
Count = 0
while(Count != num):
if((i%3==0) and (i%5==0)):
Count += 1
print(i)
i = i + 1
print("Count is :",Count)
Python program to print all the numbers
divisible by 3 and 5 for a given number
Result function with N
def result(N):
# iterate from 0 to N
for num in range(N):
# Short-circuit operator is used
if num % 3 == 0 and num % 5 == 0:
print(str(num) + " ", end = "")
else:
pass
Driver code
if name == "main":
# input goes here
N = 100
# Calling function
result(N)
I'm reading a book about python programming for begginers.
One of it's tasks is to write a prime number calcutator that calculates 'n' prime numbers.
So far I've studied strings, logic gates, while and conditions.
The idea is to make it using only those operators.
I need help because I'm stuck with this code.
Here's what I've done:
odd = 3
number = 2
limit = int(input('How many primes do you need: '))
remnant = number % odd
even_remnant = number % 2
counter = 0
while counter <= limit:
if number == 2:
print('2')
number += 2
elif (number % 2) != 0:
remnant = number % odd
while odd < number:
print('while2')
remnant = number % odd
if (number % odd) != 0 and odd == (number - 1):
print(f'{number}.')
odd = 3
number += 1
counter += 1
break
elif (number % odd) == 0:
break
odd += 2
elif (number % 2) == 0:
number += 1
odd = 3
What do you think?
Thanks everyone.
Put your debugging pants on, we're going in.
First, the code doesn't run as it's written. The variables counter and impar are undefined. First step is to remove syntax errors like that. Looks like we want to start counter at 0 and the line that uses impar isn't necessary so we can delete it.
odd = 3
number = 2
limit = int(input('How many primes do you need: '))
counter = 0
while counter < limit:
if number == 2:
print('2')
number += 2
elif (number % 2) != 0:
while odd < number:
print('while2')
remnant = number % odd
if (number % odd) != 0 and odd == (number - 1):
print(f'{number}.')
odd = 3
number += 1
break
elif (number % odd) == 0:
break
odd += 2
elif (number % 2) == 0:
number += 1
odd = 3
Now the code runs without error, but all it does is print
2
while2
And then fails to terminate.
So we know we enter the while odd < number loop only once and we don't print anything during that loop. If we also print the value of odd and number while we are in there we see odd = 3 and number = 5. Neither of the if conditions are met and the odd += 2 line is hit. Now odd = 5 and the while loop exits without printing 5 even though 5 is prime. If we want to hit our print statement by meeting the condition odd == (number - 1) we better go in steps of 1 when incrementing odd. Let's change to odd += 1 and re-run the code.
Now when I say I need 2 primes it prints
2
5
7
And then prints while2 forever. At least it prints prime numbers! But it skipped 3 and printed too many, and I had to use Ctrl-C to quit the program. Too many primes were printed because the outer loop while counter <= limit: condition was never reached. Inside the loop, we never increase the value of counter. Whenever we print a prime, we need to increase counter.
Also, to make sure we print 3, take a look at the first if condition in the loop.
if number == 2:
print('2')
number += 2 # Oops, we skipped over 3
Let's update this:
if number == 2:
print('2')
print('3')
counter += 2 # Let's count both of these!
number += 2
Also adding counter += 1 after the other print, re-running the code we get
How many primes do you need: 2
2
3
5.
How many primes do you need: 3
2
3
5.
7.
Oops, we are getting one more than we need. This is because when counter == limit we run the while loop one more time. Let's change our while loop condition to while counter < limit:. That change gets us just the right number of primes.
How many primes do you need: 4
2
3
5.
7.
But if we ask for 5
How many primes do you need: 5
2
3
5.
7.
And the program never exits. If we check the values of odd and number, we see that the loops is running with odd=3 and number=9 over and over again.
Reason through the code when odd=3 and number=9. We break out of the while odd < number while loop when we hit this code
elif (number % odd) == 0
break
But we never increase the value of number, so it is still equal to 9 the next time through the loop. Let's update this to
elif (number % odd) == 0
number += 1
break
Now when we re-run the code we get
How many primes do you need: 5
2
3
5.
7.
11.
Huzzah! And it works when asking for more primes as well. Here is the code as it is currently:
odd = 3
number = 2
limit = int(input('How many primes do you need: '))
counter = 0
while counter < limit:
if number == 2:
print('2')
print('3')
counter += 2
number += 2
elif (number % 2) != 0:
while odd < number:
if (number % odd) != 0 and odd == (number - 1):
print(f'{number}.')
odd = 3
number += 1
break
elif (number % odd) == 0:
number += 1
break
odd += 1
elif (number % 2) == 0:
number += 1
odd = 3
Now that we have working code, let's improve it! One of our bugs was that we forgot to increase number by 1 in one case. Notice that no matter how we exit the outer while loop while counter <= limit: we want to increment number. So, instead of doing it in many places, let's move all of those to the end of the while block.
We also set odd=3 whenever exiting the while block. What we want to ensure is that odd=3 at the start of the while loop, so let's move that there. Now there is no more code in the elif (number % 2) == 0: block, so we can remove that line.
number = 2
limit = int(input('How many primes do you need: '))
counter = 0
while counter < limit:
odd = 3
if number == 2:
print('2')
print('3')
counter += 2
elif (number % 2) != 0:
while odd < number:
if (number % odd) != 0 and odd == (number - 1):
print(f'{number}.')
counter += 1
break
elif (number % odd) == 0:
break
odd += 1
number += 1
I think the code is more clear if the while loop ends when the condition is met, rather than on break statements. We want the while loop to end if we find the number is divisible by something, or we run out of numbers to check.
`while number % odd != 0 and odd < number:`
And the only thing we need to do in the while loop is increment odd. Then after the loop, we can check the value of odd to see which condition was met.
number = 2
limit = int(input('How many primes do you need: '))
counter = 0
while counter < limit:
odd = 3
if number == 2:
print('2')
print('3')
counter += 2
elif (number % 2) != 0:
while number % odd != 0 and odd < number:
odd += 1
if odd == number: # No divisor was found!
print(f'{number}.')
counter += 1
number += 1
Notice that we are "hard coding" the divisibility by 2 (number % 2) != 0 and then using the variable odd to check divisibility by everything else. If we start odd at 2 instead of 3, we don't have to do the hard coding.
number = 2
limit = int(input('How many primes do you need: '))
counter = 0
while counter < limit:
odd = 2
if number == 2:
print('2')
print('3')
counter += 2
while number % odd != 0 and odd < number:
odd += 1
if odd == number: # No divisor was found!
print(f'{number}.')
counter += 1
number += 1
When we make this change, we also notice that we find the primes 2 and 3 twice, so we can remove the hard coded version of those:
number = 2
limit = int(input('How many primes do you need: '))
counter = 0
while counter < limit:
odd = 2
while number % odd != 0 and odd < number:
odd += 1
if odd == number: # No divisor was found!
print(f'{number}.')
counter += 1
number += 1
When I try to run this code it tells me that Counter is not set, so right before entering the loop set Counter to 0.
Another problem is that you start by finding 2 in the first case of your loop, this is nice. Here after the loop runs again, now with number set to 4. Because of your += 2 instruction.
It then runs the last elif case. where (number % 2) == 0. here it set number = 5, and odd = 3. But it doesn't print 3. I think you mean to do this.
Now it runs the loop again, and enter the second elif case (number % 2) != 0.
The first line in the elif clause the variable impar is not defined so it will fail.
I can't understand your program but it's good
def is_prime(n):
st = "prime" # being prime status
for i in range(2,n):
if n % i == 0: # if number is prime
st = "not prime"
break;
return st
n = int(input("enter n: "))
pc = 0 # prime conter
c = 1 # counter
while n != pc:
if is_prime(c) == "prime":
print (c)
pc += 1
c += 1
To calculate 'n' number for prime numbers you needn't use so many statements, if you make use of the the arithmetic and logical or bit-wise operators, which you will be learning in the future chapters of the python book you're referring.
I shall help you by editing the code for you.
number = int(input("Enter range: "))
print("Prime numbers:", end=' ')
for n in range(2, number):
for i in range(2, n):
if n % i == 0:
break
else:
print(n, end=' ')
I'm trying to create a function that take two parameters: D = digit (0-9) and n = positive number.
If the D is parity number, the function should give me 0 but ,if the D is odd number, the function should count numbers of odd number I have in n.
There is a problem with this code but I don't know what:
def testD(D,n):
if D % 2 == 0:
return 0
count = 0
while n > 0:
if(n%10) %2==1:
count +=1
n=n/10
return count
I changed 2 things :
while n > 1: instead of while n > 0: otherwise your loop never stops
n=n//10 instead of n=n/10, where // is the euclidian division, which is what you need here
You should try this :
def testD(D,n):
if D % 2 == 0:
return 0
count = 0
while n > 1:
if(n%10) %2==1:
count +=1
n=n//10
return count
print(testD(7, 555))
# output : 3 (because 7 is odd, and there is 3 odd digits in 555)
My code is:
currentNum = 0
divisible = True
prime = 0
counter = 1
counter2 = 1
counter3 = 0
counter4 = 0
while not counter == 10:
while not counter2 == counter:
currentNum = counter / counter2
while not counter3 == counter:
if currentNum == counter3:
counter4 = counter4 + 1
if counter4 == 1:
divisible = True
counter4 = 0
else:
divisible = False
prime = prime + 1
counter4 = 0
counter3 = 0
counter2 = 1
counter = counter + 1
print(prime)
but for some reason it only shows 0.5 whenever I try to use it.
Well first 0 and 1 are not prime numbers so we must take care of that. Also 2 is prime so we must also take care of that. Now that the outlier prime numbers are out we can focus on the normal ones.
A prime number can only be divided by 1 and itself. So we must make a list to and make sure our input can't be divided by any number in that list. Also even numbers are out of the playing field since they can be divided by 2.
First I make a function to check the input against every number up to the number to see if it can be divided by other numbers. Then I check if the number is even (num%2 is a good way to check if something is even) or if the number can be divided by any other number.
See how I put the even check first to save time if the number is even we don't have to check all the numbers in the list we can just return false without iterating through the entire list.
def is_prime(num):
if num < 0 or num in [0,1]:
return False
elif num == 2:
return True
def prime_range_check():
for number in range(2,num):
if num%number == 0:
return False
if num % 2 == 0 or prime_range_check() == False:
return False
return True
My objective was to use the index of a list to do addition/subtraction with. Where by I turned the even index positive, and the odd index negative.
EX1: 1234508 Should be answered by a 0: 1-2+3-4+5-0+8 = 11, then the while loops it again and I get 1-2+1 = 0
Ex2: 12345 Should be answered by a 3: 1-2+3-5 = 3, so it shouldn't go through the loop again.
Ex3: 121 Should be answered by a 0: 1-2+1 = 0, so it shouldn't go throught he loop again.
def main():
print()
print("Program to determine if a number is evenly\ndivisible by 11")
print()
indexed = input("Enter a number: ",)
total = 0
num = 0
while num >= 10:
for item in indexed:
if num %2 == 0:
total = total + int(item)
else:
total = total - int(item)
num = num + 1
print(total)
main()
Note that this print statement above is a place holder for a if statement which is inactive on my code, but was printing as large bold print here.
Let's say you have a string st whose characters are all digits, and that you want to have the sum of these digits. You then define the following function
def sd(st):
return sum(int(d) for d in st)
that we can test in the interpreter
In [30]: sd('10101010101010101010')
Out[30]: 10
In [31]: sd('101010101010101010101')
Out[31]: 11
What you really want is to sum the odd digits and subtract the even ones, but this is equivalent to sum the odds, sum separately the evens and then take the difference, isn't it? so what you want is
step_1 = sd(odds(st)) - sd(evens(st))
How can you separate the odd digits from the even ones? Ah! no need for a function, we can use slices
step_2 = sd(st[::2]) - sd(st[1::2])
Now we want to test the slices in the interpreter
In [32]: '101010101010101010101'[::2]
Out[32]: '11111111111'
In [33]: '101010101010101010101'[1::2]
Out[33]: '0000000000'
But step_2 could be a negative number, that I don't want to manage... I'd rather use the abs builtin
step_3 = abs(sd(st[::2]) - sd(st[1::2]))
and this is exactly what you were looking for.
Eventually we can put all the above together, but we may need to iterate until the difference is less than 11 --- we'll use an infinite loop and a break statement to exit the loop when we'll have found the answer
def sd(st):
return sum(int(d) for d in st)
number = input('Give me a number: ')
trial = number
while True:
n = abs(sd(trial[::2]) - sd(trial[1::2]))
if n < 11: break
trial = str(n)
if n > 0:
...
else:
...
what exactly do you want to do with this?
evenindex = evenindex int(item)
"list" is a type, means the list type in python, so it cannot be the name of a variable. Furthermore, you have not defined this variable in your code.
I have figured out the answer to the question I asked above. As such, my answer here is in the event anyone stumbles upon my above question.
def main():
indexed = input("Enter a number: ",)
total = 0
num = 0
while num <= 10:
for item in indexed:
if num %2 == 0:
total = abs(total + int(item))
else:
total = abs(total - int(item))
num = num + 1
if total == 0:
print(indexed, "is evenly divisible by 11 \ncheck since", indexed, "modulus 11 is", int(indexed) % 11)
else:
print(indexed, "is not evenly divisible by 11 \ncheck since", indexed, "modulus 11 is", int(indexed) % 11)
input()
main()