Develop Reference

How I can use regex to remove repeated characters from string

I have a string as follows where I tried to remove similar consecutive characters.
import re
input = "abccbcbbb";
for i in input :
input = re.sub("(.)\\1+", "",input);
print(input)
Now I need to let the user specify the value of k.
I am using the following python code to do it, but I got the error message TypeError: can only concatenate str (not "int") to str
import re
input = "abccbcbbb";
k=3
for i in input :
input= re.sub("(.)\\1+{"+(k-1)+"}", "",input)
print(input)

The for i in input : does not do what you need. i is each character in the input string, and your re.sub is supposed to take the whole input as a char sequence.
If you plan to match a specific amount of chars you should get rid of the + quantifier after \1. The limiting {min,} / {min,max} quantifier should be placed right after the pattern it modifies.
Also, it is more convenient to use raw string literals when defining regexps.
You can use
import re
input_text = "abccbcbbb";
k=3
input_text = re.sub(fr"(.)\1{{{k-1}}}", "", input_text)
print(input_text)
# => abccbc
See this Python demo.
The fr"(.)\1{{{k-1}}}" raw f-string literal will translate into (.)\1{2} pattern. In f-strings, you need to double curly braces to denote a literal curly brace and you needn't escape \1 again since it is a raw string literal.

If I were you, I would prefer to do it like suggested before. But since I've already spend time on answering this question here is my handmade solution.
The pattern described below creates a named group named "letter". This group updates iterative, so firstly it is a, then b, etc. Then it looks ahead for all the repetitions of the group "letter" (which updates for each letter).
So it finds all groups of repeated letters and replaces them with empty string.
import re
input = 'abccbcbbb'
result = 'abcbcb'
pattern = r'(?P<letter>[a-z])(?=(?P=letter)+)'
substituted = re.sub(pattern, '', input)
assert substituted == result

Just to make sure I have the question correct you mean to turn "abccbcbbb" into "abcbcb" only removing sequential duplicate characters. Is there a reason you need to use regex? you could likely do a simple list comprehension. I mean this is a really cut and dirty way to do it but you could just put
input = "abccbcbbb"
input = list(input)
previous = input.pop(0)
result = [previous]
for letter in input:
if letter != previous : result += letter
previous = letter
result = "".join(result)
and with a method like this, you could make it easier to read and faster with a bit of modification id assume.

Remove Characters From A String Until A Specific Format is Reached

So I have the following strings and I have been trying to figure out how to manipulate them in such a way that I get a specific format.
string1-itd_jan2021-internal
string2itd_mar2021-space
string3itd_feb2021-internal
string4-itd_mar2021-moon
string5itd_jun2021-internal
string6-itd_feb2021-apollo
I want to be able to get rid of any of the last string so I am just left with the month and year, like below:
string1-itd_jan2021
string2itd_mar2021
string3itd_feb2021
string4-itd_mar2021
string5itd_jun2021
string6-itd_feb2021
I thought about using string.split on the - but then realized that for some strings this wouldn't work. I also thought about getting rid of a set amount of characters by putting it into a list and slicing but the end is varying characters length?
Is there anything I can do it with regex or any other python module?

Use str.rsplit with the appropriate maxsplit parameter:
s = s.rsplit("-", 1)[0]
You could also use str.split (even though this is clearly the worse choice):
s = "-".join(s.split("-")[:-1])
Or using regular expressions:
s = re.sub(r'-[^-]*$', '', s)
# "-[^-]*" a "-" followed by any number of non-"-"

With a regex:
import re
re.sub(r'([0-9]{4}).*$', r'\1', s)

Use re.sub like so:
import re
lines = '''string1-itd_jan2021-internal
string2itd_mar2021-space
string3itd_feb2021-internal
string4-itd_mar2021-moon
string5itd_jun2021-internal
string6-itd_feb2021-apollo'''
for old in lines.split('\n'):
new = re.sub(r'[-][^-]+$', '', old)
print('\t'.join([old, new]))
Prints:
string1-itd_jan2021-internal string1-itd_jan2021
string2itd_mar2021-space string2itd_mar2021
string3itd_feb2021-internal string3itd_feb2021
string4-itd_mar2021-moon string4-itd_mar2021
string5itd_jun2021-internal string5itd_jun2021
string6-itd_feb2021-apollo string6-itd_feb2021
Explanation:
r'[-][^-]+$' : Literal dash (-), followed by any character other than a dash ([^-]) repeated 1 or more times, followed by the end of the string ($).

Remove brackets and number inside from string Python

I've seen a lot of examples on how to remove brackets from a string in Python, but I've not seen any that allow me to remove the brackets and a number inside of the brackets from that string.
For example, suppose I've got a string such as "abc[1]". How can I remove the "[1]" from the string to return just "abc"?
I've tried the following:
stringTest = "abc[1]"
stringTestWithoutBrackets = str(stringTest).strip('[]')
but this only outputs the string without the final bracket
abc[1
I've also tried with a wildcard option:
stringTest = "abc[1]"
stringTestWithoutBrackets = str(stringTest).strip('[\w+\]')
but this also outputs the string without the final bracket
abc[1

You could use regular expressions for that, but I think the easiest way would be to use split:
>>> stringTest = "abc[1][2][3]"
>>> stringTest.split('[', maxsplit=1)[0]
'abc'

You can use regex but you need to use it with the re module:
re.sub(r'\[\d+\]', '', stringTest)
If the [<number>] part is always at the end of the string you can also strip via:
stringTest.rstrip('[0123456789]')
Though the latter version might strip beyond the [ if the previous character is in the strip list too. For example in "abc1[5]" the "1" would be stripped as well.

Assuming your string has the format "text[number]" and you only want to keep the "text", then you could do:
stringTest = "abc[1]"
bracketBegin = stringTest.find('[')
stringTestWithoutBrackets = stringTest[:bracketBegin]

Python: strip function definition using regex

I am a very beginner of programming and reading the book "Automate the boring stuff with Python'. In Chapter 7, there is a project practice: the regex version of strip(). My code below does not work (I use Python 3.6.1). Could anyone help?
import re
string = input("Enter a string to strip: ")
strip_chars = input("Enter the characters you want to be stripped: ")
def strip_fn(string, strip_chars):
if strip_chars == '':
blank_start_end_regex = re.compile(r'^(\s)+|(\s)+$')
stripped_string = blank_start_end_regex.sub('', string)
print(stripped_string)
else:
strip_chars_start_end_regex = re.compile(r'^(strip_chars)*|(strip_chars)*$')
stripped_string = strip_chars_start_end_regex.sub('', string)
print(stripped_string)

You can also use re.sub to substitute the characters in the start or end.
Let us say if the char is 'x'
re.sub(r'^x+', "", string)
re.sub(r'x+$', "", string)
The first line as lstrip and the second as rstrip
This just looks simpler.

When using r'^(strip_chars)*|(strip_chars)*$' string literal, the strip_chars is not interpolated, i.e. it is treated as a part of the string. You need to pass it as a variable to the regex. However, just passing it in the current form would result in a "corrupt" regex because (...) in a regex is a grouping construct, while you want to match a single char from the define set of chars stored in the strip_chars variable.
You could just wrap the string with a pair of [ and ] to create a character class, but if the variable contains, say z-a, it would make the resulting pattern invalid. You also need to escape each char to play it safe.
Replace
r'^(strip_chars)*|(strip_chars)*$'
with
r'^[{0}]+|[{0}]+$'.format("".join([re.escape(x) for x in strip_chars]))
I advise to replace * (zero or more occurrences) with + (one or more occurrences) quantifier because in most cases, when we want to remove something, we need to match at least 1 occurrence of the unnecessary string(s).
Also, you may replace r'^(\s)+|(\s)+$' with r'^\s+|\s+$' since the repeated capturing groups will keep on re-writing group values upon each iteration slightly hampering the regex execution.

#! python
# Regex Version of Strip()
import re
def RegexStrip(mainString,charsToBeRemoved=None):
if(charsToBeRemoved!=None):
regex=re.compile(r'[%s]'%charsToBeRemoved)#Interesting TO NOTE
return regex.sub('',mainString)
else:
regex=re.compile(r'^\s+')
regex1=re.compile(r'$\s+')
newString=regex1.sub('',mainString)
newString=regex.sub('',newString)
return newString
Str=' hello3123my43name is antony '
print(RegexStrip(Str))
Maybe this could help, it can be further simplified of course.

I want to split a string by a character on its first occurence, which belongs to a list of characters. How to do this in python?

Basically, I have a list of special characters. I need to split a string by a character if it belongs to this list and exists in the string. Something on the lines of:
def find_char(string):
if string.find("some_char"):
#do xyz with some_char
elif string.find("another_char"):
#do xyz with another_char
else:
return False
and so on. The way I think of doing it is:
def find_char_split(string):
char_list = [",","*",";","/"]
for my_char in char_list:
if string.find(my_char) != -1:
my_strings = string.split(my_char)
break
else:
my_strings = False
return my_strings
Is there a more pythonic way of doing this? Or the above procedure would be fine? Please help, I'm not very proficient in python.
(EDIT): I want it to split on the first occurrence of the character, which is encountered first. That is to say, if the string contains multiple commas, and multiple stars, then I want it to split by the first occurrence of the comma. Please note, if the star comes first, then it will be broken by the star.

I would favor using the re module for this because the expression for splitting on multiple arbitrary characters is very simple:
r'[,*;/]'
The brackets create a character class that matches anything inside of them. The code is like this:
import re
results = re.split(r'[,*;/]', my_string, maxsplit=1)
The maxsplit argument makes it so that the split only occurs once.
If you are doing the same split many times, you can compile the regex and search on that same expression a little bit faster (but see Jon Clements' comment below):
c = re.compile(r'[,*;/]')
results = c.split(my_string)
If this speed up is important (it probably isn't) you can use the compiled version in a function instead of having it re compile every time. Then make a separate function that stores the actual compiled expression:
def split_chars(chars, maxsplit=0, flags=0, string=None):
# see note about the + symbol below
c = re.compile('[{}]+'.format(''.join(chars)), flags=flags)
def f(string, maxsplit=maxsplit):
return c.split(string, maxsplit=maxsplit)
return f if string is None else f(string)
Then:
special_split = split_chars(',*;/', maxsplit=1)
result = special_split(my_string)
But also:
result = split_chars(',*;/', my_string, maxsplit=1)
The purpose of the + character is to treat multiple delimiters as one if that is desired (thank you Jon Clements). If this is not desired, you can just use re.compile('[{}]'.format(''.join(chars))) above. Note that with maxsplit=1, this will not have any effect.
Finally: have a look at this talk for a quick introduction to regular expressions in Python, and this one for a much more information packed journey.