I have set up a virtual environment correctly have activated it and when I do "which python" it tells me the correct directory, but when I do pip install in the venv it installs the package in the default directory of the mac and not in my venv. I have tried using pycharm and installing packages with that, but it happens the same thing.
Edit:
Following I will do a walkthru of my steps, first I did python3 -m venv /path/to/new/virtual/environment, then I did source env/bin/activate, then I did which python and I got the intended directory, afterwards I did pip3 install numpy and I saw the installation process, then I did pip list and numpy was not there, I checked the directory manually and it still was not there. I retried all the same thing with pycharm with the same results.
Follow these steps in order -
In your current working directory :
python3 -m venv venv
source venv/bin/activate
(venv) pip3 install library_name
To check if libraries were properly installed or not :
(venv) pip3 freeze
and check if your installed libraries is displayed on the terminal screen or not.
To deactivate the virtual environment :
(venv) deactivate
This is due to permission issues
Run this command to change permission of your virtual environment folder
sudo chmod -R 777 venv
After activating your virtual environment
source venv/bin/activate
Then try to install Django by either Python3 or Python2
pip3 install django or pip install django
Then check the list of installed packages by either Python3 or Python2
pip3 list or pip list
NOTE: If you run sudo pip3 install django or pip install in virtual environment that is not writeable by default it will be installed outside of virtual environment
If you run pip3 install django or pip install in virtual environment that is not writtable by default it will be installed outside of virtual environment you will get OS Persmission Error
I have used pip3 and pip because you can install packages by either Python3 or Python2, thing to remember if you created virtual environment by Python3, use pip3 and if you created by using Python2 use pip.
When I try python3 -m venv venv, terminal returns
python3: posix_spawn: /Library/Frameworks/Python.framework/Versions/3.8/bin/python3.82.7:No such file or directory
I have seen other posts mentioning Home Brew related issues but I doubt this is the case. I did try uninstalling and installing Python.
Note: I was connected to localhost with a virtualenv. When I tried again later on, this was returned. I am building a Flask application.
Now you can use pipenv library for creating the virtual environment.
pipenv install pipenv
for example:
mkdir testapp
cd testapp
pipenv shell
Now the virtual environment is ready.
Then to install libraries in the virtual environment instead of "pip" you have to use "pipenv".
For example:
pipenv install requests
pipenv install flask
Then to write the requirements.txt you can use
pip freeze > requirements.txt
To uninstall libraries:
pipenv uninstall requests
Each time to work on the virtual environment:
pipenv shell
How to exit the virtual environment?
exit
I'm to deploy Python into a production system and the python script I have has a number of modules associated with it.
Is there a way to install python with only a specific list of modules? Abit like with generating a jar, you can have a folder with all the other dependency jar's in a folder, which is nice and clean. I don't want to compile the python code so I want something similar.
(Note: I also don't want to create a virtual environment - I want the default environment like this)
You can either use virtualenv, which basically is what the name suggests, or you can use Docker, which personally I prefer
If you don't want to do like what Amir is suggesting above, then 2 other options are available:
Copy those modules and place them in the same folder where your script is installed
Create a requirements.txt file with the name & version of those modules and then run "pip install -r requirements.txt" to install these modules in your site-packages folder
To manage your python packages you can use great virtualenv tool, it looks really simple and works well on linux/macOS/Windows. Any package which will be installed in activated virtualenv will be available only in this virtualenv, so you can have for example 3 different versions of "Django" package on your machine and work with them using different virtual environments:
Install virtualenv:
$ pip3 install virtualenv
Create your virtualenv:
$ virtualenv -p python3 my_virtualenv_name
Activate your virtualenv:
$ . my_virtualenv_name/bin/activate
Check what packages have been installed:
$ pip freeze
Install any package for example "Django":
$ pip install Django
Confirm installation:
$ pip freeze | grep Django
Uninstall any package from your virtual environment:
$ pip uninstall Django -y
Uninstall all packages from your virtual environment:
$ pip freeze | xargs pip uninstall -y
Deactivate virtualenv
$ deactivate
More info in the official documentation: https://virtualenv.pypa.io/en/latest/
I do not have root previlege on a linux server so I want to creat a virtual python according to creating a "virtual" python.
After I run virtual-python.py, I do have python in ~/bin/python:
Then, according to setuptools PyPI page, I download ez_setup.py and run ~/bin/python ez_setup.py. Error occurs:
What should I do?
Looking at the linked website, it looks outdated. You use pip, not easy_install.
For installing development packages, I always take the following rules in account:
The system package manager is responsible for system-wide packages, so never use sudo pip. This doesn't just match the question, but this is always a good idea.
The package manager packages are probably outdated. You'll want an up-to-date version for development tools.
I recommend the following way to install local development tools.
$ # Install pip and setuptools on a user level
$ curl https://bootstrap.pypa.io/get-pip.py | python - --user
$ # Add the executables to your path. Add this to your `.bashrc` or `.profile` as well
$ export PATH=$PATH/$HOME/.local/bin
At this point pip should be accessible from the command line and usable without sudo. Use this to install virtualenv, the most widely used tools to set up virtual environments.
$ pip install virtualenv --user
Now simply use virtualenv to set up an environment to run your application in:
$ virtualenv myapp
Now activate the virtual environment and do whatever you would like to do with it. Note that after activating the virtual environment, pip refers to pip installed inside of the virtualenv, not the one installed on a user level.
$ source myapp/bin/activate
(myapp)$ pip install -r requirements.txt # This is just an example
You'll want to create a new virtual environment for each application you run on the server, so the dependencies can't conflict.
Using virtualenv, I run my projects with the default version of Python (2.7). On one project, I need to use Python 3.4.
I used brew install python3 to install it on my Mac. Now, how do I create a virtualenv that uses the new version?
e.g. sudo virtualenv envPython3
If I try:
virtualenv -p python3 test
I get:
Running virtualenv with interpreter /usr/local/bin/python3
Using base prefix '/usr/local/Cellar/python3/3.4.0_1/Frameworks/Python.framework/Versions/3.4'
New python executable in test/bin/python3.4
Also creating executable in test/bin/python
Failed to import the site module
Traceback (most recent call last):
File "/Users/user/Documents/workspace/test/test/bin/../lib/python3.4/site.py", line 67, in <module>
import os
File "/Users/user/Documents/workspace/test/test/bin/../lib/python3.4/os.py", line 634, in <module>
from _collections_abc import MutableMapping
ImportError: No module named '_collections_abc'
ERROR: The executable test/bin/python3.4 is not functioning
ERROR: It thinks sys.prefix is '/Users/user/Documents/workspace/test' (should be '/Users/user/Documents/workspace/test/test')
ERROR: virtualenv is not compatible with this system or executable
simply run
virtualenv -p python3 envname
Update after OP's edit:
There was a bug in the OP's version of virtualenv, as described here. The problem was fixed by running:
pip install --upgrade virtualenv
Python 3 has a built-in support for virtual environments - venv. It might be better to use that instead. Referring to the docs:
Creation of virtual environments is done by executing the pyvenv
script:
pyvenv /path/to/new/virtual/environment
Update for Python 3.6 and newer:
As pawciobiel correctly comments, pyvenv is deprecated as of Python 3.6 and the new way is:
python3 -m venv /path/to/new/virtual/environment
I'v tried pyenv and it's very handy for switching python versions (global, local in folder or in the virtualenv):
brew install pyenv
then install Python version you want:
pyenv install 3.5.0
and simply create virtualenv with path to needed interpreter version:
virtualenv -p /Users/johnny/.pyenv/versions/3.5.0/bin/python3.5 myenv
That's it, check the version:
. ./myenv/bin/activate && python -V
There are also plugin for pyenv pyenv-virtualenv but it didn't work for me somehow.
Install prerequisites.
sudo apt-get install python3 python3-pip virtualenvwrapper
Create a Python3 based virtual environment. Optionally enable --system-site-packages flag.
mkvirtualenv -p /usr/bin/python3 <venv-name>
Set into the virtual environment.
workon <venv-name>
Install other requirements using pip package manager.
pip install -r requirements.txt
pip install <package_name>
When working on multiple python projects simultaneously it is usually recommended to install common packages like pdbpp globally and then reuse them in virtualenvs.
Using this technique saves a lot of time spent on fetching packages and installing them, apart from consuming minimal disk space and network bandwidth.
sudo -H pip3 -v install pdbpp
mkvirtualenv -p $(which python3) --system-site-packages <venv-name>
Django specific instructions
If there are a lot of system wide python packages then it is recommended to not use --system-site-packages flag especially during development since I have noticed that it slows down Django startup a lot. I presume Django environment initialisation is manually scanning and appending all site packages from the system path which might be the reason. Even python manage.py shell becomes very slow.
Having said that experiment which option works better. Might be safe to just skip --system-site-packages flag for Django projects.
virtualenv --python=/usr/bin/python3 <name of env>
worked for me.
This is all you need, in order to run a virtual environment in python / python3
First if virtualenv not installed, run
pip3 install virtualenv
Now Run:
virtualenv -p python3 <env name> # you can specify full path instead <env_name> to install the files in a different location other than the current location
Sometime the cmd virtualenv fails, if so use this:
python3 -m virtualenv <env_name> # you can specify full path instead <env_name> to install the files in a different location other than the current location
Now activate the virtual env:
source <env_name>/bin/activate
Or:
source `pwd`/<env_name>/bin/activate
Now run
which python
You should see the full path to your dir and <env_name>/bin/python suffix
To exit the virtualenv, run:
deactivate
To troubleshoot Python location got to here
You can specify specific Version of Python while creating environment.
It's mentioned in virtualenv.py
virtualenv --python=python3.5 envname
In some cases this has to be the full path to the executable:
virtualenv --python=/Users/username/.pyenv/versions/3.6.0/bin/python3.6 envname
How -p works
parser.add_option(
'-p', '--python',
dest='python',
metavar='PYTHON_EXE',
help='The Python interpreter to use, e.g., --python=python3.5 will use the python3.5 '
'interpreter to create the new environment. The default is the interpreter that '
'virtualenv was installed with (%s)' % sys.executable)
I had the same ERROR message. tbrisker's solution did not work in my case. Instead this solved the issue:
$ python3 -m venv .env
In addition to the other answers, I recommend checking what instance of virtualenv you are executing:
which virtualenv
If this turns up something in /usr/local/bin, then it is possible - even likely - that you installed virtualenv (possibly using an instance of easy_tools or pip) without using your system's package manager (brew in OP's case). This was my problem.
Years ago - when I was even more ignorant - I had installed virtualenv and it was masking my system's package-provided virtualenv.
After removing this old, broken virtualenv, my problems went away.
The below simple commands can create a virtual env with version 3.5
apt-get install python3-venv
python3.5 -m venv <your env name>
if you want virtual env version as 3.6
python3.6 -m venv <your env name>
Python now comes with its own implementation of virtual environment, by the name of "venv". I would suggest using that, instead of virtualenv.
Quoting from venv - docs,
Deprecated since version 3.6: pyvenv was the recommended tool for
creating virtual environments for Python 3.3 and 3.4, and is
deprecated in Python 3.6.
Changed in version 3.5: The use of venv is now recommended for
creating virtual environments.
For windows, to initiate venv on some project, open cmd:
python -m venv "c:\path\to\myenv"
(Would suggest using double quote around directory path if it contains any spaces. Ex: "C:/My Dox/Spaced Directory/Something")
Once venv is set up, you will see some new folders inside your project directory. One of them would be "Scripts".
To activate or invoke venv you need:
C:\> <venv>\Scripts\activate.bat
You can deactivate a virtual environment by typing “deactivate” in your shell. With this, you are now ready to install your project specific libraries, which will reside under the folder "Lib".
================================ Edit 1 ====================================
The scenario which will be discussed below is not what originally asked, just adding this in case someone use vscode with python extension
In case, you use vs code with its python extension, you might face an issue with its pylint which points to the global installation. In this case, pylint won't be able to see the modules that are installed in your virtual environment and hence will show errors while importing.
Here is a simple method to get past this.
cd Workspace\Scripts
.\Activate.ps1
code .
We are basically activating the environment first and then invoking vs-code so that pylint starts within the environment and can see all local packages.
In python3.6 I tried
python3 -m venv myenv,
as per the documentation, but it was taking so long. So the very simple and quick command is
python -m venv yourenv
It worked for me on python3.6.
On Mac I had to do the following to get it to work.
mkvirtualenv --python=/usr/bin/python3 YourEnvNameHere
If you install python3 (brew install python3) along with virtualenv burrito, you can then do mkvirtualenv -p $(which python3) env_name
Of course, I know virtualenv burrito is just a wrapper, but it has served me well over the years, reducing some learning curves.
virtualenv --python=/usr/local/bin/python3 <VIRTUAL ENV NAME>
this will add python3
path for your virtual enviroment.
It worked for me
virtualenv --no-site-packages --distribute -p /usr/bin/python3 ~/.virtualenvs/py3
For those having troubles while working with Anaconda3 (Python 3).
You could use
conda create -n name_of_your_virtualenv python=python_version
To activate the environment ( Linux, MacOS)
source activate name_of_your_virtualenv
For Windows
activate name_of_your_virtualenv
I tried all the above stuff, it still didn't work. So as a brute force, I just re-installed the anaconda, re-installed the virtualenv... and it worked.
Amans-MacBook-Pro:~ amanmadan$ pip install virtualenv
You are using pip version 6.1.1, however version 8.1.2 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Collecting virtualenv
Downloading virtualenv-15.0.3-py2.py3-none-any.whl (3.5MB)
100% |████████████████████████████████| 3.5MB 114kB/s
Installing collected packages: virtualenv
Successfully installed virtualenv-15.0.3
Amans-MacBook-Pro:python amanmadan$ virtualenv my_env
New python executable in /Users/amanmadan/Documents/HadoopStuff/python/my_env/bin/python
Installing setuptools, pip, wheel...done.
Amans-MacBook-Pro:python amanmadan$
I wanted to keep python 2.7.5 as default version on Centos 7 but have python 3.6.1 in a virtual environment running alongside other virtual environments in python 2.x
I found the below link the best solution for the newest python version ( python 3.6.1)
https://www.digitalocean.com/community/tutorial_series/how-to-install-and-set-up-a-local-programming-environment-for-python-3.
It shows the steps for different platforms but the basic steps are
Install python3.x (if not present) for your platform
Install python3.x-devel for your platform
Create virtual environment in python 3.x
(for example $ python3.6 -m venv virenv_test_p3/ )
Activate the testenvironment for python 3.x
(for example source virenv_test_p3/bin/activate)
Install the packages which you want to use in your new python 3 virtual environment and which are supported ( for example pip install Django==1.11.2)
On Windows command line, the following worked for me. First find out where your python executables are located:
where python
This will output the paths to the different python.exe on your system. Here were mine:
C:\Users\carandangc\Anaconda3\python.exe
C:\Python27\python.exe
So for Python3, this was located in the first path for me, so I cd to the root folder of the application where I want to create a virtual environment folder. Then I run the following which includes the path to my Python3 executable, naming my virtual environment 'venv':
virtualenv --python=/Users/carandangc/Anaconda3/python.exe venv
Next, activate the virtual environment:
call venv\Scripts\activate.bat
Finally, install the dependencies for this virtual environment:
pip install -r requirements.txt
This requirements.txt could be populated manually if you know the libraries/modules needed for your application in the virtual environment. If you had the application running in another environment, then you can automatically produce the dependencies by running the following (cd to the application folder in the environment where it is working):
pip freeze > requirements.txt
Then once you have the requirements.txt that you have 'frozen', then you can install the requirements on another machine or clean environment with the following (after cd to the application folder):
pip install -r requirements.txt
To see your python version in the virtual environment, run:
python --version
Then voila...you have your Python3 running in your virtual environment. Output for me:
Python 3.7.2
For those of you who are using pipenv and want to install specific version:
pipenv install --python 3.6
I got the same error due to it being a conflict with miniconda3 install so when you type "which virtualenv" and if you've installed miniconda and it's pointing to that install you can either remove it (if your like me and haven't moved to it yet) or change your environment variable to point to the install you want.