Related
How could I check if a number is a perfect square?
Speed is of no concern, for now, just working.
See also: Integer square root in python.
The problem with relying on any floating point computation (math.sqrt(x), or x**0.5) is that you can't really be sure it's exact (for sufficiently large integers x, it won't be, and might even overflow). Fortunately (if one's in no hurry;-) there are many pure integer approaches, such as the following...:
def is_square(apositiveint):
x = apositiveint // 2
seen = set([x])
while x * x != apositiveint:
x = (x + (apositiveint // x)) // 2
if x in seen: return False
seen.add(x)
return True
for i in range(110, 130):
print i, is_square(i)
Hint: it's based on the "Babylonian algorithm" for square root, see wikipedia. It does work for any positive number for which you have enough memory for the computation to proceed to completion;-).
Edit: let's see an example...
x = 12345678987654321234567 ** 2
for i in range(x, x+2):
print i, is_square(i)
this prints, as desired (and in a reasonable amount of time, too;-):
152415789666209426002111556165263283035677489 True
152415789666209426002111556165263283035677490 False
Please, before you propose solutions based on floating point intermediate results, make sure they work correctly on this simple example -- it's not that hard (you just need a few extra checks in case the sqrt computed is a little off), just takes a bit of care.
And then try with x**7 and find clever way to work around the problem you'll get,
OverflowError: long int too large to convert to float
you'll have to get more and more clever as the numbers keep growing, of course.
If I was in a hurry, of course, I'd use gmpy -- but then, I'm clearly biased;-).
>>> import gmpy
>>> gmpy.is_square(x**7)
1
>>> gmpy.is_square(x**7 + 1)
0
Yeah, I know, that's just so easy it feels like cheating (a bit the way I feel towards Python in general;-) -- no cleverness at all, just perfect directness and simplicity (and, in the case of gmpy, sheer speed;-)...
Use Newton's method to quickly zero in on the nearest integer square root, then square it and see if it's your number. See isqrt.
Python ≥ 3.8 has math.isqrt. If using an older version of Python, look for the "def isqrt(n)" implementation here.
import math
def is_square(i: int) -> bool:
return i == math.isqrt(i) ** 2
Since you can never depend on exact comparisons when dealing with floating point computations (such as these ways of calculating the square root), a less error-prone implementation would be
import math
def is_square(integer):
root = math.sqrt(integer)
return integer == int(root + 0.5) ** 2
Imagine integer is 9. math.sqrt(9) could be 3.0, but it could also be something like 2.99999 or 3.00001, so squaring the result right off isn't reliable. Knowing that int takes the floor value, increasing the float value by 0.5 first means we'll get the value we're looking for if we're in a range where float still has a fine enough resolution to represent numbers near the one for which we are looking.
If youre interested, I have a pure-math response to a similar question at math stackexchange, "Detecting perfect squares faster than by extracting square root".
My own implementation of isSquare(n) may not be the best, but I like it. Took me several months of study in math theory, digital computation and python programming, comparing myself to other contributors, etc., to really click with this method. I like its simplicity and efficiency though. I havent seen better. Tell me what you think.
def isSquare(n):
## Trivial checks
if type(n) != int: ## integer
return False
if n < 0: ## positivity
return False
if n == 0: ## 0 pass
return True
## Reduction by powers of 4 with bit-logic
while n&3 == 0:
n=n>>2
## Simple bit-logic test. All perfect squares, in binary,
## end in 001, when powers of 4 are factored out.
if n&7 != 1:
return False
if n==1:
return True ## is power of 4, or even power of 2
## Simple modulo equivalency test
c = n%10
if c in {3, 7}:
return False ## Not 1,4,5,6,9 in mod 10
if n % 7 in {3, 5, 6}:
return False ## Not 1,2,4 mod 7
if n % 9 in {2,3,5,6,8}:
return False
if n % 13 in {2,5,6,7,8,11}:
return False
## Other patterns
if c == 5: ## if it ends in a 5
if (n//10)%10 != 2:
return False ## then it must end in 25
if (n//100)%10 not in {0,2,6}:
return False ## and in 025, 225, or 625
if (n//100)%10 == 6:
if (n//1000)%10 not in {0,5}:
return False ## that is, 0625 or 5625
else:
if (n//10)%4 != 0:
return False ## (4k)*10 + (1,9)
## Babylonian Algorithm. Finding the integer square root.
## Root extraction.
s = (len(str(n))-1) // 2
x = (10**s) * 4
A = {x, n}
while x * x != n:
x = (x + (n // x)) >> 1
if x in A:
return False
A.add(x)
return True
Pretty straight forward. First it checks that we have an integer, and a positive one at that. Otherwise there is no point. It lets 0 slip through as True (necessary or else next block is infinite loop).
The next block of code systematically removes powers of 4 in a very fast sub-algorithm using bit shift and bit logic operations. We ultimately are not finding the isSquare of our original n but of a k<n that has been scaled down by powers of 4, if possible. This reduces the size of the number we are working with and really speeds up the Babylonian method, but also makes other checks faster too.
The third block of code performs a simple Boolean bit-logic test. The least significant three digits, in binary, of any perfect square are 001. Always. Save for leading zeros resulting from powers of 4, anyway, which has already been accounted for. If it fails the test, you immediately know it isnt a square. If it passes, you cant be sure.
Also, if we end up with a 1 for a test value then the test number was originally a power of 4, including perhaps 1 itself.
Like the third block, the fourth tests the ones-place value in decimal using simple modulus operator, and tends to catch values that slip through the previous test. Also a mod 7, mod 8, mod 9, and mod 13 test.
The fifth block of code checks for some of the well-known perfect square patterns. Numbers ending in 1 or 9 are preceded by a multiple of four. And numbers ending in 5 must end in 5625, 0625, 225, or 025. I had included others but realized they were redundant or never actually used.
Lastly, the sixth block of code resembles very much what the top answerer - Alex Martelli - answer is. Basically finds the square root using the ancient Babylonian algorithm, but restricting it to integer values while ignoring floating point. Done both for speed and extending the magnitudes of values that are testable. I used sets instead of lists because it takes far less time, I used bit shifts instead of division by two, and I smartly chose an initial start value much more efficiently.
By the way, I did test Alex Martelli's recommended test number, as well as a few numbers many orders magnitude larger, such as:
x=1000199838770766116385386300483414671297203029840113913153824086810909168246772838680374612768821282446322068401699727842499994541063844393713189701844134801239504543830737724442006577672181059194558045164589783791764790043104263404683317158624270845302200548606715007310112016456397357027095564872551184907513312382763025454118825703090010401842892088063527451562032322039937924274426211671442740679624285180817682659081248396873230975882215128049713559849427311798959652681930663843994067353808298002406164092996533923220683447265882968239141724624870704231013642255563984374257471112743917655991279898690480703935007493906644744151022265929975993911186879561257100479593516979735117799410600147341193819147290056586421994333004992422258618475766549646258761885662783430625 ** 2
for i in range(x, x+2):
print(i, isSquare(i))
printed the following results:
1000399717477066534083185452789672211951514938424998708930175541558932213310056978758103599452364409903384901149641614494249195605016959576235097480592396214296565598519295693079257885246632306201885850365687426564365813280963724310434494316592041592681626416195491751015907716210235352495422858432792668507052756279908951163972960239286719854867504108121432187033786444937064356645218196398775923710931242852937602515835035177768967470757847368349565128635934683294155947532322786360581473152034468071184081729335560769488880138928479829695277968766082973795720937033019047838250608170693879209655321034310764422462828792636246742456408134706264621790736361118589122797268261542115823201538743148116654378511916000714911467547209475246784887830649309238110794938892491396597873160778553131774466638923135932135417900066903068192088883207721545109720968467560224268563643820599665232314256575428214983451466488658896488012211237139254674708538347237589290497713613898546363590044902791724541048198769085430459186735166233549186115282574626012296888817453914112423361525305960060329430234696000121420787598967383958525670258016851764034555105019265380321048686563527396844220047826436035333266263375049097675787975100014823583097518824871586828195368306649956481108708929669583308777347960115138098217676704862934389659753628861667169905594181756523762369645897154232744410732552956489694024357481100742138381514396851789639339362228442689184910464071202445106084939268067445115601375050153663645294106475257440167535462278022649865332161044187890625 True
1000399717477066534083185452789672211951514938424998708930175541558932213310056978758103599452364409903384901149641614494249195605016959576235097480592396214296565598519295693079257885246632306201885850365687426564365813280963724310434494316592041592681626416195491751015907716210235352495422858432792668507052756279908951163972960239286719854867504108121432187033786444937064356645218196398775923710931242852937602515835035177768967470757847368349565128635934683294155947532322786360581473152034468071184081729335560769488880138928479829695277968766082973795720937033019047838250608170693879209655321034310764422462828792636246742456408134706264621790736361118589122797268261542115823201538743148116654378511916000714911467547209475246784887830649309238110794938892491396597873160778553131774466638923135932135417900066903068192088883207721545109720968467560224268563643820599665232314256575428214983451466488658896488012211237139254674708538347237589290497713613898546363590044902791724541048198769085430459186735166233549186115282574626012296888817453914112423361525305960060329430234696000121420787598967383958525670258016851764034555105019265380321048686563527396844220047826436035333266263375049097675787975100014823583097518824871586828195368306649956481108708929669583308777347960115138098217676704862934389659753628861667169905594181756523762369645897154232744410732552956489694024357481100742138381514396851789639339362228442689184910464071202445106084939268067445115601375050153663645294106475257440167535462278022649865332161044187890626 False
And it did this in 0.33 seconds.
In my opinion, my algorithm works the same as Alex Martelli's, with all the benefits thereof, but has the added benefit highly efficient simple-test rejections that save a lot of time, not to mention the reduction in size of test numbers by powers of 4, which improves speed, efficiency, accuracy and the size of numbers that are testable. Probably especially true in non-Python implementations.
Roughly 99% of all integers are rejected as non-Square before Babylonian root extraction is even implemented, and in 2/3 the time it would take the Babylonian to reject the integer. And though these tests dont speed up the process that significantly, the reduction in all test numbers to an odd by dividing out all powers of 4 really accelerates the Babylonian test.
I did a time comparison test. I tested all integers from 1 to 10 Million in succession. Using just the Babylonian method by itself (with my specially tailored initial guess) it took my Surface 3 an average of 165 seconds (with 100% accuracy). Using just the logical tests in my algorithm (excluding the Babylonian), it took 127 seconds, it rejected 99% of all integers as non-Square without mistakenly rejecting any perfect squares. Of those integers that passed, only 3% were perfect Squares (a much higher density). Using the full algorithm above that employs both the logical tests and the Babylonian root extraction, we have 100% accuracy, and test completion in only 14 seconds. The first 100 Million integers takes roughly 2 minutes 45 seconds to test.
EDIT: I have been able to bring down the time further. I can now test the integers 0 to 100 Million in 1 minute 40 seconds. A lot of time is wasted checking the data type and the positivity. Eliminate the very first two checks and I cut the experiment down by a minute. One must assume the user is smart enough to know that negatives and floats are not perfect squares.
import math
def is_square(n):
sqrt = math.sqrt(n)
return (sqrt - int(sqrt)) == 0
A perfect square is a number that can be expressed as the product of two equal integers. math.sqrt(number) return a float. int(math.sqrt(number)) casts the outcome to int.
If the square root is an integer, like 3, for example, then math.sqrt(number) - int(math.sqrt(number)) will be 0, and the if statement will be False. If the square root was a real number like 3.2, then it will be True and print "it's not a perfect square".
It fails for a large non-square such as 152415789666209426002111556165263283035677490.
My answer is:
def is_square(x):
return x**.5 % 1 == 0
It basically does a square root, then modulo by 1 to strip the integer part and if the result is 0 return True otherwise return False. In this case x can be any large number, just not as large as the max float number that python can handle: 1.7976931348623157e+308
It is incorrect for a large non-square such as 152415789666209426002111556165263283035677490.
This can be solved using the decimal module to get arbitrary precision square roots and easy checks for "exactness":
import math
from decimal import localcontext, Context, Inexact
def is_perfect_square(x):
# If you want to allow negative squares, then set x = abs(x) instead
if x < 0:
return False
# Create localized, default context so flags and traps unset
with localcontext(Context()) as ctx:
# Set a precision sufficient to represent x exactly; `x or 1` avoids
# math domain error for log10 when x is 0
ctx.prec = math.ceil(math.log10(x or 1)) + 1 # Wrap ceil call in int() on Py2
# Compute integer square root; don't even store result, just setting flags
ctx.sqrt(x).to_integral_exact()
# If previous line couldn't represent square root as exact int, sets Inexact flag
return not ctx.flags[Inexact]
For demonstration with truly huge values:
# I just kept mashing the numpad for awhile :-)
>>> base = 100009991439393999999393939398348438492389402490289028439083249803434098349083490340934903498034098390834980349083490384903843908309390282930823940230932490340983098349032098324908324098339779438974879480379380439748093874970843479280329708324970832497804329783429874329873429870234987234978034297804329782349783249873249870234987034298703249780349783497832497823497823497803429780324
>>> sqr = base ** 2
>>> sqr ** 0.5 # Too large to use floating point math
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OverflowError: int too large to convert to float
>>> is_perfect_power(sqr)
True
>>> is_perfect_power(sqr-1)
False
>>> is_perfect_power(sqr+1)
False
If you increase the size of the value being tested, this eventually gets rather slow (takes close to a second for a 200,000 bit square), but for more moderate numbers (say, 20,000 bits), it's still faster than a human would notice for individual values (~33 ms on my machine). But since speed wasn't your primary concern, this is a good way to do it with Python's standard libraries.
Of course, it would be much faster to use gmpy2 and just test gmpy2.mpz(x).is_square(), but if third party packages aren't your thing, the above works quite well.
I just posted a slight variation on some of the examples above on another thread (Finding perfect squares) and thought I'd include a slight variation of what I posted there here (using nsqrt as a temporary variable), in case it's of interest / use:
import math
def is_square(n):
if not (isinstance(n, int) and (n >= 0)):
return False
else:
nsqrt = math.sqrt(n)
return nsqrt == math.trunc(nsqrt)
It is incorrect for a large non-square such as 152415789666209426002111556165263283035677490.
A variant of #Alex Martelli's solution without set
When x in seen is True:
In most cases, it is the last one added, e.g. 1022 produces the x's sequence 511, 256, 129, 68, 41, 32, 31, 31;
In some cases (i.e., for the predecessors of perfect squares), it is the second-to-last one added, e.g. 1023 produces 511, 256, 129, 68, 41, 32, 31, 32.
Hence, it suffices to stop as soon as the current x is greater than or equal to the previous one:
def is_square(n):
assert n > 1
previous = n
x = n // 2
while x * x != n:
x = (x + (n // x)) // 2
if x >= previous:
return False
previous = x
return True
x = 12345678987654321234567 ** 2
assert not is_square(x-1)
assert is_square(x)
assert not is_square(x+1)
Equivalence with the original algorithm tested for 1 < n < 10**7. On the same interval, this slightly simpler variant is about 1.4 times faster.
This is my method:
def is_square(n) -> bool:
return int(n**0.5)**2 == int(n)
Take square root of number. Convert to integer. Take the square. If the numbers are equal, then it is a perfect square otherwise not.
It is incorrect for a large square such as 152415789666209426002111556165263283035677489.
If the modulus (remainder) leftover from dividing by the square root is 0, then it is a perfect square.
def is_square(num: int) -> bool:
return num % math.sqrt(num) == 0
I checked this against a list of perfect squares going up to 1000.
It is possible to improve the Babylonian method by observing that the successive terms form a decreasing sequence if one starts above the square root of n.
def is_square(n):
assert n > 1
a = n
b = (a + n // a) // 2
while b < a:
a = b
b = (a + n // a) // 2
return a * a == n
If it's a perfect square, its square root will be an integer, the fractional part will be 0, we can use modulus operator to check fractional part, and check if it's 0, it does fail for some numbers, so, for safety, we will also check if it's square of the square root even if the fractional part is 0.
import math
def isSquare(n):
root = math.sqrt(n)
if root % 1 == 0:
if int(root) * int(root) == n:
return True
return False
isSquare(4761)
You could binary-search for the rounded square root. Square the result to see if it matches the original value.
You're probably better off with FogleBirds answer - though beware, as floating point arithmetic is approximate, which can throw this approach off. You could in principle get a false positive from a large integer which is one more than a perfect square, for instance, due to lost precision.
A simple way to do it (faster than the second one) :
def is_square(n):
return str(n**(1/2)).split(".")[1] == '0'
Another way:
def is_square(n):
if n == 0:
return True
else:
if n % 2 == 0 :
for i in range(2,n,2):
if i*i == n:
return True
else :
for i in range(1,n,2):
if i*i == n:
return True
return False
This response doesn't pertain to your stated question, but to an implicit question I see in the code you posted, ie, "how to check if something is an integer?"
The first answer you'll generally get to that question is "Don't!" And it's true that in Python, typechecking is usually not the right thing to do.
For those rare exceptions, though, instead of looking for a decimal point in the string representation of the number, the thing to do is use the isinstance function:
>>> isinstance(5,int)
True
>>> isinstance(5.0,int)
False
Of course this applies to the variable rather than a value. If I wanted to determine whether the value was an integer, I'd do this:
>>> x=5.0
>>> round(x) == x
True
But as everyone else has covered in detail, there are floating-point issues to be considered in most non-toy examples of this kind of thing.
If you want to loop over a range and do something for every number that is NOT a perfect square, you could do something like this:
def non_squares(upper):
next_square = 0
diff = 1
for i in range(0, upper):
if i == next_square:
next_square += diff
diff += 2
continue
yield i
If you want to do something for every number that IS a perfect square, the generator is even easier:
(n * n for n in range(upper))
I think that this works and is very simple:
import math
def is_square(num):
sqrt = math.sqrt(num)
return sqrt == int(sqrt)
It is incorrect for a large non-square such as 152415789666209426002111556165263283035677490.
a=int(input('enter any number'))
flag=0
for i in range(1,a):
if a==i*i:
print(a,'is perfect square number')
flag=1
break
if flag==1:
pass
else:
print(a,'is not perfect square number')
In kotlin :
It's quite easy and it passed all test cases as well.
really thanks to >> https://www.quora.com/What-is-the-quickest-way-to-determine-if-a-number-is-a-perfect-square
fun isPerfectSquare(num: Int): Boolean {
var result = false
var sum=0L
var oddNumber=1L
while(sum<num){
sum = sum + oddNumber
oddNumber = oddNumber+2
}
result = sum == num.toLong()
return result
}
def isPerfectSquare(self, num: int) -> bool:
left, right = 0, num
while left <= right:
mid = (left + right) // 2
if mid**2 < num:
left = mid + 1
elif mid**2 > num:
right = mid - 1
else:
return True
return False
This is an elegant, simple, fast and arbitrary solution that works for Python version >= 3.8:
from math import isqrt
def is_square(number):
if number >= 0:
return isqrt(number) ** 2 == number
return False
Decide how long the number will be.
take a delta 0.000000000000.......000001
see if the (sqrt(x))^2 - x is greater / equal /smaller than delta and decide based on the delta error.
import math
def is_square(n):
sqrt = math.sqrt(n)
return sqrt == int(sqrt)
It fails for a large non-square such as 152415789666209426002111556165263283035677490.
The idea is to run a loop from i = 1 to floor(sqrt(n)) then check if squaring it makes n.
bool isPerfectSquare(int n)
{
for (int i = 1; i * i <= n; i++) {
// If (i * i = n)
if ((n % i == 0) && (n / i == i)) {
return true;
}
}
return false;
}
How could I check if a number is a perfect square?
Speed is of no concern, for now, just working.
See also: Integer square root in python.
The problem with relying on any floating point computation (math.sqrt(x), or x**0.5) is that you can't really be sure it's exact (for sufficiently large integers x, it won't be, and might even overflow). Fortunately (if one's in no hurry;-) there are many pure integer approaches, such as the following...:
def is_square(apositiveint):
x = apositiveint // 2
seen = set([x])
while x * x != apositiveint:
x = (x + (apositiveint // x)) // 2
if x in seen: return False
seen.add(x)
return True
for i in range(110, 130):
print i, is_square(i)
Hint: it's based on the "Babylonian algorithm" for square root, see wikipedia. It does work for any positive number for which you have enough memory for the computation to proceed to completion;-).
Edit: let's see an example...
x = 12345678987654321234567 ** 2
for i in range(x, x+2):
print i, is_square(i)
this prints, as desired (and in a reasonable amount of time, too;-):
152415789666209426002111556165263283035677489 True
152415789666209426002111556165263283035677490 False
Please, before you propose solutions based on floating point intermediate results, make sure they work correctly on this simple example -- it's not that hard (you just need a few extra checks in case the sqrt computed is a little off), just takes a bit of care.
And then try with x**7 and find clever way to work around the problem you'll get,
OverflowError: long int too large to convert to float
you'll have to get more and more clever as the numbers keep growing, of course.
If I was in a hurry, of course, I'd use gmpy -- but then, I'm clearly biased;-).
>>> import gmpy
>>> gmpy.is_square(x**7)
1
>>> gmpy.is_square(x**7 + 1)
0
Yeah, I know, that's just so easy it feels like cheating (a bit the way I feel towards Python in general;-) -- no cleverness at all, just perfect directness and simplicity (and, in the case of gmpy, sheer speed;-)...
Use Newton's method to quickly zero in on the nearest integer square root, then square it and see if it's your number. See isqrt.
Python ≥ 3.8 has math.isqrt. If using an older version of Python, look for the "def isqrt(n)" implementation here.
import math
def is_square(i: int) -> bool:
return i == math.isqrt(i) ** 2
Since you can never depend on exact comparisons when dealing with floating point computations (such as these ways of calculating the square root), a less error-prone implementation would be
import math
def is_square(integer):
root = math.sqrt(integer)
return integer == int(root + 0.5) ** 2
Imagine integer is 9. math.sqrt(9) could be 3.0, but it could also be something like 2.99999 or 3.00001, so squaring the result right off isn't reliable. Knowing that int takes the floor value, increasing the float value by 0.5 first means we'll get the value we're looking for if we're in a range where float still has a fine enough resolution to represent numbers near the one for which we are looking.
If youre interested, I have a pure-math response to a similar question at math stackexchange, "Detecting perfect squares faster than by extracting square root".
My own implementation of isSquare(n) may not be the best, but I like it. Took me several months of study in math theory, digital computation and python programming, comparing myself to other contributors, etc., to really click with this method. I like its simplicity and efficiency though. I havent seen better. Tell me what you think.
def isSquare(n):
## Trivial checks
if type(n) != int: ## integer
return False
if n < 0: ## positivity
return False
if n == 0: ## 0 pass
return True
## Reduction by powers of 4 with bit-logic
while n&3 == 0:
n=n>>2
## Simple bit-logic test. All perfect squares, in binary,
## end in 001, when powers of 4 are factored out.
if n&7 != 1:
return False
if n==1:
return True ## is power of 4, or even power of 2
## Simple modulo equivalency test
c = n%10
if c in {3, 7}:
return False ## Not 1,4,5,6,9 in mod 10
if n % 7 in {3, 5, 6}:
return False ## Not 1,2,4 mod 7
if n % 9 in {2,3,5,6,8}:
return False
if n % 13 in {2,5,6,7,8,11}:
return False
## Other patterns
if c == 5: ## if it ends in a 5
if (n//10)%10 != 2:
return False ## then it must end in 25
if (n//100)%10 not in {0,2,6}:
return False ## and in 025, 225, or 625
if (n//100)%10 == 6:
if (n//1000)%10 not in {0,5}:
return False ## that is, 0625 or 5625
else:
if (n//10)%4 != 0:
return False ## (4k)*10 + (1,9)
## Babylonian Algorithm. Finding the integer square root.
## Root extraction.
s = (len(str(n))-1) // 2
x = (10**s) * 4
A = {x, n}
while x * x != n:
x = (x + (n // x)) >> 1
if x in A:
return False
A.add(x)
return True
Pretty straight forward. First it checks that we have an integer, and a positive one at that. Otherwise there is no point. It lets 0 slip through as True (necessary or else next block is infinite loop).
The next block of code systematically removes powers of 4 in a very fast sub-algorithm using bit shift and bit logic operations. We ultimately are not finding the isSquare of our original n but of a k<n that has been scaled down by powers of 4, if possible. This reduces the size of the number we are working with and really speeds up the Babylonian method, but also makes other checks faster too.
The third block of code performs a simple Boolean bit-logic test. The least significant three digits, in binary, of any perfect square are 001. Always. Save for leading zeros resulting from powers of 4, anyway, which has already been accounted for. If it fails the test, you immediately know it isnt a square. If it passes, you cant be sure.
Also, if we end up with a 1 for a test value then the test number was originally a power of 4, including perhaps 1 itself.
Like the third block, the fourth tests the ones-place value in decimal using simple modulus operator, and tends to catch values that slip through the previous test. Also a mod 7, mod 8, mod 9, and mod 13 test.
The fifth block of code checks for some of the well-known perfect square patterns. Numbers ending in 1 or 9 are preceded by a multiple of four. And numbers ending in 5 must end in 5625, 0625, 225, or 025. I had included others but realized they were redundant or never actually used.
Lastly, the sixth block of code resembles very much what the top answerer - Alex Martelli - answer is. Basically finds the square root using the ancient Babylonian algorithm, but restricting it to integer values while ignoring floating point. Done both for speed and extending the magnitudes of values that are testable. I used sets instead of lists because it takes far less time, I used bit shifts instead of division by two, and I smartly chose an initial start value much more efficiently.
By the way, I did test Alex Martelli's recommended test number, as well as a few numbers many orders magnitude larger, such as:
x=1000199838770766116385386300483414671297203029840113913153824086810909168246772838680374612768821282446322068401699727842499994541063844393713189701844134801239504543830737724442006577672181059194558045164589783791764790043104263404683317158624270845302200548606715007310112016456397357027095564872551184907513312382763025454118825703090010401842892088063527451562032322039937924274426211671442740679624285180817682659081248396873230975882215128049713559849427311798959652681930663843994067353808298002406164092996533923220683447265882968239141724624870704231013642255563984374257471112743917655991279898690480703935007493906644744151022265929975993911186879561257100479593516979735117799410600147341193819147290056586421994333004992422258618475766549646258761885662783430625 ** 2
for i in range(x, x+2):
print(i, isSquare(i))
printed the following results:
1000399717477066534083185452789672211951514938424998708930175541558932213310056978758103599452364409903384901149641614494249195605016959576235097480592396214296565598519295693079257885246632306201885850365687426564365813280963724310434494316592041592681626416195491751015907716210235352495422858432792668507052756279908951163972960239286719854867504108121432187033786444937064356645218196398775923710931242852937602515835035177768967470757847368349565128635934683294155947532322786360581473152034468071184081729335560769488880138928479829695277968766082973795720937033019047838250608170693879209655321034310764422462828792636246742456408134706264621790736361118589122797268261542115823201538743148116654378511916000714911467547209475246784887830649309238110794938892491396597873160778553131774466638923135932135417900066903068192088883207721545109720968467560224268563643820599665232314256575428214983451466488658896488012211237139254674708538347237589290497713613898546363590044902791724541048198769085430459186735166233549186115282574626012296888817453914112423361525305960060329430234696000121420787598967383958525670258016851764034555105019265380321048686563527396844220047826436035333266263375049097675787975100014823583097518824871586828195368306649956481108708929669583308777347960115138098217676704862934389659753628861667169905594181756523762369645897154232744410732552956489694024357481100742138381514396851789639339362228442689184910464071202445106084939268067445115601375050153663645294106475257440167535462278022649865332161044187890625 True
1000399717477066534083185452789672211951514938424998708930175541558932213310056978758103599452364409903384901149641614494249195605016959576235097480592396214296565598519295693079257885246632306201885850365687426564365813280963724310434494316592041592681626416195491751015907716210235352495422858432792668507052756279908951163972960239286719854867504108121432187033786444937064356645218196398775923710931242852937602515835035177768967470757847368349565128635934683294155947532322786360581473152034468071184081729335560769488880138928479829695277968766082973795720937033019047838250608170693879209655321034310764422462828792636246742456408134706264621790736361118589122797268261542115823201538743148116654378511916000714911467547209475246784887830649309238110794938892491396597873160778553131774466638923135932135417900066903068192088883207721545109720968467560224268563643820599665232314256575428214983451466488658896488012211237139254674708538347237589290497713613898546363590044902791724541048198769085430459186735166233549186115282574626012296888817453914112423361525305960060329430234696000121420787598967383958525670258016851764034555105019265380321048686563527396844220047826436035333266263375049097675787975100014823583097518824871586828195368306649956481108708929669583308777347960115138098217676704862934389659753628861667169905594181756523762369645897154232744410732552956489694024357481100742138381514396851789639339362228442689184910464071202445106084939268067445115601375050153663645294106475257440167535462278022649865332161044187890626 False
And it did this in 0.33 seconds.
In my opinion, my algorithm works the same as Alex Martelli's, with all the benefits thereof, but has the added benefit highly efficient simple-test rejections that save a lot of time, not to mention the reduction in size of test numbers by powers of 4, which improves speed, efficiency, accuracy and the size of numbers that are testable. Probably especially true in non-Python implementations.
Roughly 99% of all integers are rejected as non-Square before Babylonian root extraction is even implemented, and in 2/3 the time it would take the Babylonian to reject the integer. And though these tests dont speed up the process that significantly, the reduction in all test numbers to an odd by dividing out all powers of 4 really accelerates the Babylonian test.
I did a time comparison test. I tested all integers from 1 to 10 Million in succession. Using just the Babylonian method by itself (with my specially tailored initial guess) it took my Surface 3 an average of 165 seconds (with 100% accuracy). Using just the logical tests in my algorithm (excluding the Babylonian), it took 127 seconds, it rejected 99% of all integers as non-Square without mistakenly rejecting any perfect squares. Of those integers that passed, only 3% were perfect Squares (a much higher density). Using the full algorithm above that employs both the logical tests and the Babylonian root extraction, we have 100% accuracy, and test completion in only 14 seconds. The first 100 Million integers takes roughly 2 minutes 45 seconds to test.
EDIT: I have been able to bring down the time further. I can now test the integers 0 to 100 Million in 1 minute 40 seconds. A lot of time is wasted checking the data type and the positivity. Eliminate the very first two checks and I cut the experiment down by a minute. One must assume the user is smart enough to know that negatives and floats are not perfect squares.
import math
def is_square(n):
sqrt = math.sqrt(n)
return (sqrt - int(sqrt)) == 0
A perfect square is a number that can be expressed as the product of two equal integers. math.sqrt(number) return a float. int(math.sqrt(number)) casts the outcome to int.
If the square root is an integer, like 3, for example, then math.sqrt(number) - int(math.sqrt(number)) will be 0, and the if statement will be False. If the square root was a real number like 3.2, then it will be True and print "it's not a perfect square".
It fails for a large non-square such as 152415789666209426002111556165263283035677490.
My answer is:
def is_square(x):
return x**.5 % 1 == 0
It basically does a square root, then modulo by 1 to strip the integer part and if the result is 0 return True otherwise return False. In this case x can be any large number, just not as large as the max float number that python can handle: 1.7976931348623157e+308
It is incorrect for a large non-square such as 152415789666209426002111556165263283035677490.
This can be solved using the decimal module to get arbitrary precision square roots and easy checks for "exactness":
import math
from decimal import localcontext, Context, Inexact
def is_perfect_square(x):
# If you want to allow negative squares, then set x = abs(x) instead
if x < 0:
return False
# Create localized, default context so flags and traps unset
with localcontext(Context()) as ctx:
# Set a precision sufficient to represent x exactly; `x or 1` avoids
# math domain error for log10 when x is 0
ctx.prec = math.ceil(math.log10(x or 1)) + 1 # Wrap ceil call in int() on Py2
# Compute integer square root; don't even store result, just setting flags
ctx.sqrt(x).to_integral_exact()
# If previous line couldn't represent square root as exact int, sets Inexact flag
return not ctx.flags[Inexact]
For demonstration with truly huge values:
# I just kept mashing the numpad for awhile :-)
>>> base = 100009991439393999999393939398348438492389402490289028439083249803434098349083490340934903498034098390834980349083490384903843908309390282930823940230932490340983098349032098324908324098339779438974879480379380439748093874970843479280329708324970832497804329783429874329873429870234987234978034297804329782349783249873249870234987034298703249780349783497832497823497823497803429780324
>>> sqr = base ** 2
>>> sqr ** 0.5 # Too large to use floating point math
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OverflowError: int too large to convert to float
>>> is_perfect_power(sqr)
True
>>> is_perfect_power(sqr-1)
False
>>> is_perfect_power(sqr+1)
False
If you increase the size of the value being tested, this eventually gets rather slow (takes close to a second for a 200,000 bit square), but for more moderate numbers (say, 20,000 bits), it's still faster than a human would notice for individual values (~33 ms on my machine). But since speed wasn't your primary concern, this is a good way to do it with Python's standard libraries.
Of course, it would be much faster to use gmpy2 and just test gmpy2.mpz(x).is_square(), but if third party packages aren't your thing, the above works quite well.
I just posted a slight variation on some of the examples above on another thread (Finding perfect squares) and thought I'd include a slight variation of what I posted there here (using nsqrt as a temporary variable), in case it's of interest / use:
import math
def is_square(n):
if not (isinstance(n, int) and (n >= 0)):
return False
else:
nsqrt = math.sqrt(n)
return nsqrt == math.trunc(nsqrt)
It is incorrect for a large non-square such as 152415789666209426002111556165263283035677490.
A variant of #Alex Martelli's solution without set
When x in seen is True:
In most cases, it is the last one added, e.g. 1022 produces the x's sequence 511, 256, 129, 68, 41, 32, 31, 31;
In some cases (i.e., for the predecessors of perfect squares), it is the second-to-last one added, e.g. 1023 produces 511, 256, 129, 68, 41, 32, 31, 32.
Hence, it suffices to stop as soon as the current x is greater than or equal to the previous one:
def is_square(n):
assert n > 1
previous = n
x = n // 2
while x * x != n:
x = (x + (n // x)) // 2
if x >= previous:
return False
previous = x
return True
x = 12345678987654321234567 ** 2
assert not is_square(x-1)
assert is_square(x)
assert not is_square(x+1)
Equivalence with the original algorithm tested for 1 < n < 10**7. On the same interval, this slightly simpler variant is about 1.4 times faster.
This is my method:
def is_square(n) -> bool:
return int(n**0.5)**2 == int(n)
Take square root of number. Convert to integer. Take the square. If the numbers are equal, then it is a perfect square otherwise not.
It is incorrect for a large square such as 152415789666209426002111556165263283035677489.
If the modulus (remainder) leftover from dividing by the square root is 0, then it is a perfect square.
def is_square(num: int) -> bool:
return num % math.sqrt(num) == 0
I checked this against a list of perfect squares going up to 1000.
It is possible to improve the Babylonian method by observing that the successive terms form a decreasing sequence if one starts above the square root of n.
def is_square(n):
assert n > 1
a = n
b = (a + n // a) // 2
while b < a:
a = b
b = (a + n // a) // 2
return a * a == n
If it's a perfect square, its square root will be an integer, the fractional part will be 0, we can use modulus operator to check fractional part, and check if it's 0, it does fail for some numbers, so, for safety, we will also check if it's square of the square root even if the fractional part is 0.
import math
def isSquare(n):
root = math.sqrt(n)
if root % 1 == 0:
if int(root) * int(root) == n:
return True
return False
isSquare(4761)
You could binary-search for the rounded square root. Square the result to see if it matches the original value.
You're probably better off with FogleBirds answer - though beware, as floating point arithmetic is approximate, which can throw this approach off. You could in principle get a false positive from a large integer which is one more than a perfect square, for instance, due to lost precision.
A simple way to do it (faster than the second one) :
def is_square(n):
return str(n**(1/2)).split(".")[1] == '0'
Another way:
def is_square(n):
if n == 0:
return True
else:
if n % 2 == 0 :
for i in range(2,n,2):
if i*i == n:
return True
else :
for i in range(1,n,2):
if i*i == n:
return True
return False
This response doesn't pertain to your stated question, but to an implicit question I see in the code you posted, ie, "how to check if something is an integer?"
The first answer you'll generally get to that question is "Don't!" And it's true that in Python, typechecking is usually not the right thing to do.
For those rare exceptions, though, instead of looking for a decimal point in the string representation of the number, the thing to do is use the isinstance function:
>>> isinstance(5,int)
True
>>> isinstance(5.0,int)
False
Of course this applies to the variable rather than a value. If I wanted to determine whether the value was an integer, I'd do this:
>>> x=5.0
>>> round(x) == x
True
But as everyone else has covered in detail, there are floating-point issues to be considered in most non-toy examples of this kind of thing.
If you want to loop over a range and do something for every number that is NOT a perfect square, you could do something like this:
def non_squares(upper):
next_square = 0
diff = 1
for i in range(0, upper):
if i == next_square:
next_square += diff
diff += 2
continue
yield i
If you want to do something for every number that IS a perfect square, the generator is even easier:
(n * n for n in range(upper))
I think that this works and is very simple:
import math
def is_square(num):
sqrt = math.sqrt(num)
return sqrt == int(sqrt)
It is incorrect for a large non-square such as 152415789666209426002111556165263283035677490.
a=int(input('enter any number'))
flag=0
for i in range(1,a):
if a==i*i:
print(a,'is perfect square number')
flag=1
break
if flag==1:
pass
else:
print(a,'is not perfect square number')
In kotlin :
It's quite easy and it passed all test cases as well.
really thanks to >> https://www.quora.com/What-is-the-quickest-way-to-determine-if-a-number-is-a-perfect-square
fun isPerfectSquare(num: Int): Boolean {
var result = false
var sum=0L
var oddNumber=1L
while(sum<num){
sum = sum + oddNumber
oddNumber = oddNumber+2
}
result = sum == num.toLong()
return result
}
def isPerfectSquare(self, num: int) -> bool:
left, right = 0, num
while left <= right:
mid = (left + right) // 2
if mid**2 < num:
left = mid + 1
elif mid**2 > num:
right = mid - 1
else:
return True
return False
This is an elegant, simple, fast and arbitrary solution that works for Python version >= 3.8:
from math import isqrt
def is_square(number):
if number >= 0:
return isqrt(number) ** 2 == number
return False
Decide how long the number will be.
take a delta 0.000000000000.......000001
see if the (sqrt(x))^2 - x is greater / equal /smaller than delta and decide based on the delta error.
import math
def is_square(n):
sqrt = math.sqrt(n)
return sqrt == int(sqrt)
It fails for a large non-square such as 152415789666209426002111556165263283035677490.
The idea is to run a loop from i = 1 to floor(sqrt(n)) then check if squaring it makes n.
bool isPerfectSquare(int n)
{
for (int i = 1; i * i <= n; i++) {
// If (i * i = n)
if ((n % i == 0) && (n / i == i)) {
return true;
}
}
return false;
}
I am new to Python and am trying to create a program for a project- firstly, I need to generate a point between the numbers 0-1.0, including 0 and 1.0 ([0, 1.0]). I searched the python library for functions (https://docs.python.org/2/library/random.html) and I found this function:
random.random()
This will return the next random floating point number in the range [0.0, 1.0). This is a problem, since it does not include 1. Although the chances of actually generating a 1 are very slim anyway, it is still important because this is a scientific program that will be used in a larger data collection.
I also found this function:
rand.randint
This will return an integer, which is also a problem.
I researched on the website and previously asked questions and found that this function:
random.uniform(a, b)
will only return a number that is greater than or equal to a and less than b.
Does anyone know how to create a random function on python that will include [0, 1.0]?
Please correct me if I was mistaken on any of this information. Thank you.
*The random numbers represent the x value of a three dimensional point on a sphere.
Could you make do with something like this?
random.randint(0, 1000) / 1000.0
Or more formally:
precision = 3
randomNumber = random.randint(0, 10 ** precision) / float(10 ** precision)
Consider the following function built on top of random.uniform. I believe that the re-sampling approach should cause all numbers in the desired interval to appear with equal probability, because the probability of returning candidate > b is 0, and originally all numbers should be equally likely.
import sys
import random
def myRandom(a, b):
candidate = uniform.random(a, b + sys.float_info.epsilon)
while candidate > b:
candidate = uniform.random(a, b + sys.float_info.epsilon)
return candidate
As gnibbler mentioned below, for the general case, it may make more sense to change both the calls to the following. Note that this will only work correctly if b > 0.
candidate = uniform.random(a, b*1.000001)
Try this:
import random
random.uniform(0.0, 1.0)
Which will, according to the documentation [Python 3.x]:
Return a random floating point number N such that a <= N <= b for a <= b and b <= N <= a for b < a.
Notice that the above paragraph states that b is in fact included in the range of possible values returned by the function. However, beware of the second part (emphasis mine):
The end-point value b may or may not be included in the range depending on floating-point rounding in the equation a + (b-a) * random().
For floating point numbers you can use numpy's machine limits for floats class to get the smallest possible value for 64bit or 32bit floating point numbers. In theory, you should be able to add this value to b in random.uniform(a, b) making 1 inclusive in your generator:
import numpy
import random
def randomDoublePrecision():
floatinfo = numpy.finfo(float)
epsilon = floatinfo.eps
a = random.uniform(0, 1 + eps)
return a
This assumes that you are using full precision floating point numbers for your number generator. For more info read this Wikipedia article.
Would it be just:
list_rnd=[random.random() for i in range(_number_of_numbers_you_want)]
list_rnd=[item/max(list_rnd) for item in list_rnd]
Generate a list of random numbers and divide it by its max value. The resulting list still flows uniform distribution.
I've had the same problem, this should help you.
a: upper limit,
b: lower limit, and
digit: digit after comma
def konv_des (bin,a,b,l,digit):
des=int(bin,2)
return round(a+(des*(b-a)/((2**l)-1)),digit)
def rand_bin(p):
key1 = ""
for i in range(p):
temp = str(random.randint(0, 1))
key1 += temp
return(key1)
def rand_chrom(a,b,digit):
l = 1
eq=False
while eq==False:
l += 1
eq=2**(l-1) < (b-a)*(10**digit) and (b-a)*(10**digit) <= (2**l)-1
return konv_des(rand_bin(l),a,b,l,digit)
#run
rand_chrom(0,1,4)
I'm working to finish a math problem that approximates the square root of a number using Newton's guess and check method in Python. The user is supposed to enter a number, an initial guess for the number, and how many times they want to check their answer before returning. To make things easier and get to know Python (I've only just started learning the language a couple of months ago) I broke it up into a number of smaller functions; the problem now, though, is that I'm having trouble calling each function and passing the numbers through.
Here is my code, with comments to help (each function is in order of use):
# This program approximates the square root of a number (entered by the user)
# using Newton's method (guess-and-check). I started with one long function,
# but after research, have attempted to apply smaller functions on top of each
# other.
# * NEED TO: call functions properly; implement a counting loop so the
# goodGuess function can only be accessed the certain # of times the user
# specifies. Even if the - .001 range isn't reached, it should return.
# sqrtNewt is basically the main, which initiates user input.
def sqrtNewt():
# c equals a running count initiated at the beginning of the program, to
# use variable count.
print("This will approximate the square root of a number, using a guess-and-check process.")
x = eval(input("Please type in a positive number to find the square root of: "))
guess = eval(input("Please type in a guess for the square root of the number you entered: "))
count = eval(input("Please enter how many times would you like this program to improve your initial guess: "))
avg = average(guess, x)
g, avg = improveG(guess, x)
final = goodGuess(avg, x)
guess = square_root(guess, x, count)
compare(guess, x)
# Average function is called; is the first step that gives an initial average,
# which implements through smaller layers of simple functions stacked on each
# other.
def average(guess, x) :
return ((guess + x) / 2)
# An improvement function which builds upon the original average function.
def improveG(guess, x) :
return average(guess, x/guess)
# A function which determines if the difference between guess X guess minus the
# original number results in an absolute vale less than 0.001. Not taking
# absolute values (like if guess times guess was greater than x) might result
# in errors
from math import *
def goodGuess(avg, x) :
num = abs(avg * avg - x)
return (num < 0.001)
# A function that, if not satisfied, continues to "tap" other functions for
# better guess outputs. i.e. as long as the guess is not good enough, keep
# improving the guess.
def square_root(guess, x, count) :
while(not goodGuess(avg, x)):
c = 0
c = c + 1
if (c < count):
guess = improveG(guess, x)
elif (c == count):
return guess
else :
pass
# Function is used to check the difference between guess and the sqrt method
# applied to the user input.
import math
def compare(guess, x):
diff = math.sqrt(x) - guess
print("The following is the difference between the approximation")
print("and the Math.sqrt method, not rounded:", diff)
sqrtNewt()
Currently, I get this error: g, avg = improveG(guess, x)
TypeError: 'float' object is not iterable.
The final function uses the final iteration of the guess to subtract from the math square root method, and returns the overall difference.
Am I even doing this right? Working code would be appreciated, with suggestions, if you can provide it. Again, I'm a newbie, so I apologize for misconceptions or blind obvious errors.
Implementation of the newton method:
It should be fairly easy to add little tweaks to it when needed. Try, and tell us when you get stuck.
from math import *
def average(a, b):
return (a + b) / 2.0
def improve(guess, x):
return average(guess, x/guess)
def good_enough(guess, x):
d = abs(guess*guess - x)
return (d < 0.001)
def square_root(guess, x):
while(not good_enough(guess, x)):
guess = improve(guess, x)
return guess
def my_sqrt(x):
r = square_root(1, x)
return r
>>> my_sqrt(16)
4.0000006366929393
NOTE: you will find enough exaples on how to use raw input here at SO or googling, BUT, if you are counting loops, the c=0 has to be outside the loop, or you will be stuck in an infinite loop.
Quiqk and dirty, lots of ways to improve:
from math import *
def average(a, b):
return (a + b) / 2.0
def improve(guess, x):
return average(guess, x/guess)
def square_root(guess, x, c):
guesscount=0
while guesscount < c :
guesscount+=1
guess = improve(guess, x)
return guess
def my_sqrt(x,c):
r = square_root(1, x, c)
return r
number=int(raw_input('Enter a positive number'))
i_guess=int(raw_input('Enter an initial guess'))
times=int(raw_input('How many times would you like this program to improve your initial guess:'))
answer=my_sqrt(number,times)
print 'sqrt is approximately ' + str(answer)
print 'difference between your guess and sqrt is ' + str(abs(i_guess-answer))
The chosen answer is a bit convoluted...no disrespect to the OP.
For anyone who ever Googles this in the future, this is my solution:
def check(x, guess):
return (abs(guess*guess - x) < 0.001)
def newton(x, guess):
while not check(x, guess):
guess = (guess + (x/guess)) / 2.0
return guess
print newton(16, 1)
Here's a rather different function to compute square roots; it assumes n is non-negative:
def mySqrt(n):
if (n == 0):
return 0
if (n < 1):
return mySqrt(n * 4) / 2
if (4 <= n):
return mySqrt(n / 4) * 2
x = (n + 1.0) / 2.0
x = (x + n/x) / 2.0
x = (x + n/x) / 2.0
x = (x + n/x) / 2.0
x = (x + n/x) / 2.0
x = (x + n/x) / 2.0
return x
This algorithm is similar to Newton's, but not identical. It was invented by a Greek mathematician named Heron (his name is sometimes spelled Hero) living in Alexandria, Egypt in the first century (about two thousand years ago). Heron's recurrence formula is simpler than Newton's; Heron used x' = (x + n/x) / 2 where Newton used x' = x - (x^2 - n) / 2x.
The first test is a special case on zero; without it, the (n < 1) test causes an infinite loop. The next two tests normalize n to the range 1 < n <= 4; making the range smaller means that we can easily compute an initial approximation to the square root of n, which is done in the first computation of x, and then "unroll the loop" and iterate the recurrence equation a fixed number of times, thus eliminating the need for testing and recurring if the difference between two successive loops is too large.
By the way, Heron was a pretty interesting fellow. In addition to inventing a method for calculating square roots, he built a working jet engine, a coin-operated vending machine, and lots of other neat stuff!
You can read more about computing square roots at my blog.
it shouldnt have to be that complicated i wrote this up
def squareroot(n,x):
final = (0.5*(x+(n/x)))
print (final)
for i in range(0,10):
final = (0.5*(final+(n/final)))
print (final)
or you could change it to be like this
n = float(input('What number would you like to squareroot?'))
x = float(input('Estimate your answer'))
final = (0.5*(x+(n/x)))
print (final)
for i in range(0,10):
final = (0.5*(final+(n/final)))
print (final)
All you need to know is the nth term in the sequence. From the Leibniz series, we know this is ((-1)**n)/((2*n)+1). Just sum this series for all i with an initial condition of zero and you're set.
def myPi(n):
pi=0
for i in range(0,n):
pi=pi+((-1)**i)/((2*i)+1)
return 4*pi
print (myPi(10000))
I am asked to write a program to solve this equation ( x^3 + x -1 = 0 ) using fixed point iteration.
What is the algorithm for fixed point iteration?
Is there any fixed point iteration code sample in Python? (not a function from any modules, but the code with algorithms)
Thank You
First, read this:
Fixed point iteration:Applications
I chose Newton's Method.
Now if you'd like to learn about generator functions, you could define a generator function, and instance a generator object as follows
def newtons_method(n):
n = float(n) #Force float arithmetic
nPlusOne = n - (pow(n,3) + n - 1)/(3*pow(n,2) +1)
while 1:
yield nPlusOne
n = nPlusOne
nPlusOne = n - (pow(n,3) + n - 1)/(3*pow(n,2) +1)
approxAnswer = newtons_method(1.0) #1.0 can be any initial guess...
Then you can gain successively better approximations by calling:
approxAnswer.next()
see: PEP 255 or Classes (Generators) - Python v2.7 for more info on Generators
For example
approx1 = approxAnswer.next()
approx2 = approxAnswer.next()
Or better yet use a loop!
As for deciding when your approximation is good enough... ;)
Pseudocode is here, you should be able to figure it out from there.