I am trying to install paramiko module..it fails with the below error
python ./test.py
Traceback (most recent call last):
File "./test.py", line 30, in <module>
import paramiko
File "/tmp/build-paramiko/paramiko-1.12.0/paramiko/__init__.py", line 64, in <module>
from transport import SecurityOptions, Transport
File "/tmp/build-paramiko/paramiko-1.12.0/paramiko/transport.py", line 45, in <module>
from paramiko.ecdsakey import ECDSAKey
File "/tmp/build-paramiko/paramiko-1.12.0/paramiko/ecdsakey.py", line 24, in <module>
from ecdsa import SigningKey, VerifyingKey, der, curves
ImportError: No module named ecdsa
Any suggestions on how to proceed with the paramiko installation ?
Download the package from 'https://github.com/warner/python-ecdsa' and install it using command
python setup.py install
Your problem will be solved.
You can use easy_install to install the lost module "ecdsa" ,which like: easy_install ecdsa,
but you have to ready easy_install first!
this:
from ecdsa import SigningKey, VerifyingKey, der, curves
ImportError: No module named ecdsa
suggests that the python-ecdsa package is missing, you can install it with
pip install ecdsa
Though in general, you shouldn't need to install paramiko from sources. You can install it with
pip install paramiko
that has the benefit of automatically resolving the dependencies of a package
Related
I can't get pip2 to work.
I need pip2, because I need to use an older tensorflow version which is not supported by python3 pip. When trying to run pip2 install I get this:
Traceback (most recent call last):
File "/usr/bin/pip2", line 11, in <module>
load_entry_point('pip==20.1.1', 'console_scripts', 'pip')()
File "/usr/lib/python2.7/site-packages/pip/_internal/cli/main.py", line 73, in main
command = create_command(cmd_name, isolated=("--isolated" in cmd_args))
File "/usr/lib/python2.7/site-packages/pip/_internal/commands/__init__.py", line 104, in create_command
module = importlib.import_module(module_path)
File "/usr/lib/python2.7/importlib/__init__.py", line 37, in import_module
__import__(name)
File "/usr/lib/python2.7/site-packages/pip/_internal/commands/install.py", line 24, in <module>
from pip._internal.cli.req_command import RequirementCommand, with_cleanup
File "/usr/lib/python2.7/site-packages/pip/_internal/cli/req_command.py", line 21, in <module>
from pip._internal.req.constructors import (
File "/usr/lib/python2.7/site-packages/pip/_internal/req/constructors.py", line 21, in <module>
from pip._vendor.pkg_resources import RequirementParseError, parse_requirements
ImportError: cannot import name RequirementParseError
I uninstalled pip2 and reinstalled it. Also did the same for pip(3). But this didn't change a thing. I could not find anything useful on this error message and feel a bit helpless. Any ideas?
update forgot to mention, that I use archlinux. I installed it with pacman -S python2-pip
Did you try installing packages using virtualenv ? pacman ? or using only pip ?
Which version of tensorflow are you trying to install ?
You can try install libraries using a recent pip2 version + virtualenv using the following commands:
pacman -S python2 python2-pip python-virtualenv
virtualenv -p python2 py2
. py2/bin/activate
pip install -U pip setuptools wheel
pip install tensorflow ipython
You may also try uninstall python2 first and reinstall it from scratch:
pacman -Rs python2 python2-pip
This link suggests that the problem might be due to a version of setuptools installed in ~/.local . Maybe you can check that.
Nevermind, setuptools was installed in my ~/.local directory for some
reason, superceding the system install, I removed that and pip2 runs
fine now.
Please see this link:
https://askubuntu.com/questions/984868/error-in-installing-sudo-pip-install-v-protobuf-3-0-0a2
The library is different but the error is the same.
I've recently updated Python to version 3.7 from version 3.5, and made it the default in my bash shell. I've also updated pip and made sure it uses Python3.7.
Now, whenever I try to install any module using pip I get this error"
$pip3 install google
Traceback (most recent call last): File "/home/AnnaK/.local/bin/pip3", line 7, in <module>
from pip._internal.cli.main import main File "/usr/lib/python3/dist-packages/pip/__init__.py", line 16, in <module>
from pip.vcs import git, mercurial, subversion, bazaar # noqa File "/usr/lib/python3/dist-packages/pip/vcs/subversion.py", line 9, in <module>
from pip.index import Link File "/usr/lib/python3/dist-packages/pip/index.py", line 30, in <module>
from pip.wheel import Wheel, wheel_ext File "/usr/lib/python3/dist-packages/pip/wheel.py", line 39, in <module>
from pip._vendor.distlib.scripts import ScriptMaker File "/usr/share/python-wheels/distlib-0.2.2-py2.py3-none-any.whl/distlib/scripts.py", line 14, in <module> File "/usr/share/python-wheels/distlib-0.2.2-py2.py3-none-any.whl/distlib/compat.py", line 66, in <module> ImportError: cannot import name 'HTTPSHandler' from 'urllib.request' (/usr/lib/python3.7/urllib/request.py)
I get the same error if I try to simply run pip. This didn't happen when I was using python3.5. I did have this problem when briefly using python2.7, but I fixed it using https://askubuntu.com/questions/581999/pip-raises-importerror-cannot-import-name-httpshandler. That solution doesn't seem to work for python3.7.
I've tried to reinstall pip, reinstall python3, update my Windows Ubuntu subsystem, and reinstall libssl-dev. I'm stumped. Any help is appreciated!
You must have inadvertently upgraded your system pip (probably through something like sudo pip install pip --upgrade)
pip x.x adjusts where its internals are situated. The pip3 command you're seeing is one provided by your package maintainer and is not a file managed by pip.
You can read more about this on pip's issue tracker
You'll probably want to not upgrade your system pip and instead use a virtualenv.
To recover the pip3 binary you'll need to sudo python3 -m pip uninstall pip && sudo apt install python3-pip --reinstall.
It should work fine if you use the first approach python3 -m pip ... instead of pip3 ....
Trying to install eyed3 but it's giving me this error:
>>> import eyed3
Traceback (most recent call last):
File "<pyshell#8>", line 1, in <module>
import eyed3
File "C:\Users\Dylan\AppData\Local\Programs\Python\Python35-32\lib\site-packages\eyed3\__init__.py", line 35, in <module>
from .utils.log import log # noqa
File "C:\Users\Dylan\AppData\Local\Programs\Python\Python35-32\lib\site-packages\eyed3\utils\__init__.py", line 27, in <module>
import magic
File "C:\Users\Dylan\AppData\Local\Programs\Python\Python35-32\lib\site-packages\magic.py", line 176, in <module>
raise ImportError('failed to find libmagic. Check your installation')
ImportError: failed to find libmagic. Check your installation
Here's the pip install:
I tried to uninstall with pip and delete all the eyed3 files, then re-install and it still gave the same error. It also does the same thing with easy_install.
On Windows
You'll need DLLs for libmagic. #julian-r has uploaded a version of this project that includes binaries to pypi: https://pypi.python.org/pypi/python-magic-bin/0.4.14
pip install python-magic-bin==0.4.14
Works for me.
I fixed it by installing libmagic with this command
brew install libmagic
You need to install libmagic before you install eye3d.
Here is a link to the git.
https://github.com/ahupp/python-magic#dependencies
You can use this to install it:
pip install python-magic
I got this error :
Traceback (most recent call last):
File "test.py", line 8, in <module>
from Crypto.Cipher import PKCS1_OAEP
File "C:\Users\Mokhles\Downloads\google-api-python-client-1.5.3\Crypto \Cipher\PKCS1_OAEP.py", line 57, in <module>
import Crypto.Signature.PKCS1_PSS
File "C:\Users\Mokhles\Downloads\google-api-python-client-1.5.3\Crypto \Signature\PKCS1_PSS.py", line 74, in <module>
from Crypto.Util.strxor import strxor
ImportError: No module named strxor
any idea how to solve it?
ENV:
-windows 10
-python 2.7
It looks like you're simply copied pyCrypto into your project. PyCrypto is library which depends on some native library/code (like libtomcrypt). You have to install it properly. You can do this for example through pip:
pip2 install pycrypto
or
pip3 install pycrypto
depending on which Python version you want to make it available.
try conda install pydotplus (may need to install tqdm first)
I finally got pip install buildbot-slave to work on Win7 (thanks to another answer on this site), and now when I attempt to create a build slave via:
buildslave create-slave slavefolder blah.blah.com:9989 buildslave password
It kicks back the following error:
Traceback (most recent call last):
File "C:\Python27\Scripts\buildslave", line 3, in <module>
from buildslave.scripts import runner
File "C:\Python27\lib\site-packages\buildslave\scripts\runner.py", line 22, in <module>
from twisted.python import reflect
File "C:\Python27\lib\site-packages\twisted\__init__.py", line 53, in <module>
_checkRequirements()
File "C:\Python27\lib\site-packages\twisted\__init__.py", line 37, in _checkRequirements
raise ImportError(required + ": no module named zope.interface.")
ImportError: Twisted requires zope.interface 3.6.0 or later: no module named zope.interface.
I've got it all installed here is my pip freeze:
Twisted==14.0.0
argparse==1.2.1
buildbot-slave==0.8.9
stevedore==0.15
virtualenv==1.9.1
virtualenv-clone==0.2.5
virtualenvwrapper==4.3.1
virtualenvwrapper-win==1.1.5
zope.interface==4.1.1
Any recommendations would be greatly appreciated.
Try to uninstall zope.interface and reinstall the version 3.6.0 using the command
pip uninstall zope.interface
pip install zope.interface==3.6.0
Hope this helps.