Develop Reference

Do character classes count as groups in regular expressions?

A small project I got assigned is supposed to extract website URLs from given text. Here's how the most relevant portion of it looks like :
webURLregex = re.compile(r'''(
(https://|http://)
[a-zA-Z0-9.%+-\\/_]+
)''',re.VERBOSE)
This does do its job properly, but I noticed that it also includes the ','s and '.' in URL strings it prints. So my first question is, how do I make it exclude any punctuation symbols in the end of the string it detects ?
My second question is referring to the title itself ( finally ), but doesn't really seem to affect this particular program I'm working on : Do character classes ( in this case [a-zA-Z0-9.%+-\/_]+ ) count as groups ( group[3] in this case ) ?
Thanks in advance.

To exclude some symbols at the end of string you can use negative lookbehind. For example, to disallow . ,:
.*(?<![.,])$

answering in reverse:
No, character classes are just shorthand for bracketed text. They don't provide groups in the same way that surrounding with parenthesis would. They only allow the regular expression engine to select the specified characters -- nothing more, nothing less.
With regards to finding comma and dot: Actually, I see the problem here, though the below may still be valuable, so I'll leave it. Essentially, you have this: [a-zA-Z0-9.%+-\\/_]+ the - character has special meaning: everything between these two characters -- by ascii code. so [A-a] is a valid range. It include A-Z, but also a bunch of other characters that aren't A-Z. If you want to include - in the range, then it needs to be the last character: [a-zA-Z0-9.%+\\/_-]+ should work
For comma, I actually don't see it represented in your regex, so I can't comment specifically on that. It shouldn't be allowed anywhere in the url. In general though, you'll just want to add more groups/more conditions.
First, break apart the url into the specifc groups you'll want:
(scheme)://(domain)(endpoint)
Each section gets a different set of requirements: e.g. maybe domain needs to end with a slash:
[a-zA-Z0-9]+\.com/ should match any domain that uses an alphanumeric character, and ends -- specifically -- with .com (note the \., otherwise it'll capture any single character followed by com/
For the endpoint section, you'll probably still want to allow special characters, but if you're confident you don't want the url to end with, say, a dot, then you could do something [A-Za-z0-9] -- note the lack of a dot here, plus, it's length -- only a single character. This will change the rest of your regex, so you need to think about that.
A couple of random thoughts:
If you're confident you want to match the whole line, add a $ to the end of the regex, to signify the end of the line. One possibility here is that your regex does match some portion of the text, but ignores the junk at the end, since you didn't say to read the whole line.
Regexes get complicated really fast -- they're kind of write-only code. Add some comments to help. E.g.
web_url_regex = re.compile(
r'(http://|https://)' # Capture the scheme name
r'([a-zA-Z0-9.%+-\\/_])' # Everything else, apparently
)
Do not try to be exhaustive in your validation -- as noted, urls are hard to validate because you can't know for sure that one is valid. But the form is pretty consistent, as laid out above: scheme, domain, endpoint (and query string)

To answer the second question first, no a character class is not a group (unless you explicitly make it into one by putting it in parentheses).
Regarding the first question of how to make it exclude the punctuation symbols at the end, the code below should answer that.
Firstly though, your regex had an issue separate from the fact that it was matching the final punctuation, namely that the last - does not appear to be intended as defining a range of characters (see footnote below re why I believe this to be the case), but was doing so. I've moved it to the end of the character class to avoid this problem.
Now a character class to match the final character is added at the end of the regexp, which is the same as the previous character class except that it does not include . (other punctuation is now already not included). So the matched pattern cannot end in .. The + (one or more) on the previous character class is now reduced to * (zero or more).
If for any reason the exact set of characters matched needs tweaking, then the same principle can still be employed: match a single character at the end from a reduced set of possibilities, preceded by any number of characters from a wider set which includes characters that are permitted to be included but not at the end.
import re
webURLregex = re.compile(r'''(
(https://|http://)
[a-zA-Z0-9.%+\\/_-]*
[a-zA-Z0-9%+\\/_-]
)''',re.VERBOSE)
str = "... at http://www.google.com/. It says"
m = re.search(webURLregex, str)
if m:
print(m.group())
Outputs:
http://www.google.com/
[*] The observation that the second - does not appear to be intended to define a character range is based on the fact that, if it was, such a range would be from 056-134 (octal) which would include also the alphabetical characters, making the a-zA-Z redundant.

Python. How to print a certain part of a line after it had been "re.searched" from a file

Could you tell me how to print this part of the line only '\w+.226.\w.+' ?
Code
VSP = input("Номер ВСП (четыре цифры): ")
a = re.compile(r'\w+.226.\w.+'+VSP)
b=re.search(a, open('Sample.txt').read())
print (b.group())
Номер ВСП (четыре цифры): 1020
10.226.27.60 1020
After I have found the intended line associated with my variable "VSP" in the txt file, how can exclude it from output, printing the"10.226.27.60" only?

You will need to modify your regex slightly to separate the trailing characters in the IP and the spaces that separate it from VSP. Adding a capture group will let you select the portion with just the IP address. The updated regex looks like this:
'(\d+\.226\.\S+)\s+' + VSP
\S (uppercase S) matches any non-whitespace, while \s (lowercase s) matches all whitespace. I replaced the first \w with the more specific \d (digits), and . (any character at all) with \. (actual period). The second \w is now \S, but you could use \d+\.\d+ if you wanted to be more specific.
Using the first capture group will give you the IP address:
print(b.group(1))
If you are looking for a single IP address once, not compiling your regex is fine. Also, reading in a small file in its entirety is OK as long as the file is small. If either is not the case, I would recommend compiling the regex and going through the file line by line. That will allow you to discard most lines much faster than using a regex would do.

I see you already have an answer.You can also try this regex if you were to separate the two groups by the whitespace:
import re
a = re.compile(r'(.+?)\s+(.+)') # edit: added ? to avoid
# greedy behaviour of first .+
# otherwise multiple spaces after the
# address will be caught into
# b.group(1), as per #Mad comment
b=re.search(a, '10.226.27.60 1020')
print (b.group(0))
print (b.group(1))
print (b.group(2))
or customize the first group regexp to your needs.
Edit:
This was not meant to be a proper answer but more of a comment wich I didn't think was readable as such; I am trying only to show group separation using regex, wich seems OP didn't know about or didn't use.
That is why I am not matching .226. because OP can do that. I also removed the file read part, which isn't needed for demonstration. Please read #Mad answer because its quite complete and in fact also shows how to use groups.

Improving accuracy/brevity of regex for inconsistent url filtering

So, for some lulz, a friend and I were playing with the idea of filtering a list (100k+) of urls to retrieve only the parent domain (ex. "domain.com|org|etc"). The only caveat is that they are not all nice and matching in format.
So, to explain, some may be "http://www.domain.com/urlstuff", some have country codes like "www.domain.co.uk/urlstuff", while others can be a bit more odd, more akin to "hello.in.con.sistent.urls.com/urlstuff".
So, story aside, I have a regex that works:
import re
firsturl = 'www.foobar.com/fizz/buzz'
m = re.search('\w+(?=(\..{3}/|\..{2}\..{2}/))\.(.{3}|.{2}\..{2})', firsturl)
m.group(0)
which returns:
foobar.com
It looks up the first "/" at the end of the url, then returns the two "." separated fields before it.
So, my query, would anyone in the stack hive mind have any wisdom to shed on how this could be done with better/shorter regex, or regex that doesn't rely on a forward lookup of the "/" within the string?
Appreciation for all of the help in this!

I do think that regex is just the right tool for this. Regex is pattern matching, which is put to best use when you have a known pattern that might have several variations, as in this case.
In your explanation of and attempted solution to the problem, I think you are greatly oversimplifying it, though. TLDs come in many more flavors than "2-digit country codes" and "3-digit" others. See ICANN's list of top-level domains for the hundreds currently available, with lengths from 2 digits and up. Also, you may have URLs without any slashes and some with multiple slashes and dots after the domain name.
So here's my solution (see on regex101):
^(?:https?://)?(?:[^/]+\.)*([^/]+\.[a-z]{2,})
What you want is captured in the first matching group.
Breakdown:
^(?:https?://)? matches a possible protocol at the beginning
(?:[^/]+\.)* matches possible multiple non-slash sequences, each followed by a dot
([^/]+\.[a-z]{2,}) matches (and captures) one final non-slash sequence followed by a dot and the TLD (2+ letters)

You can use this regex instead:
import re
firsturl = 'www.foobar.com/fizz/buzz'
domain = re.match("(.+?)\/", firsturl).group()
Notice, though, that this will only work without 'http://'.

Regular expression code is not working (Python)

Assume I have a word AB1234XZY or even 1AB1234XYZ.
I want to extract ONLY 'AB1234' or 1AB1234 (ie. everything up until the letters at the end).
I have used the following code to extract that but it's not working:
base= re.match(r"^(\D+)(\d+)", word).group(0)
When I print base, it's not working for the second case. Any ideas why?

Your regex doesn't work for the second case because it starts with a number; the \D at the beginning of your pattern matches anything that ISN'T a number.
You should be able to use something quite simple for this--simpler, in fact, than anything else I see here.
'.*\d'
That's it! This should match everything up to and including the last number in your string, and ignore everything after that.
Here's the pattern working online, so you can see for yourself.

(.+?\d+)\w+ would give you what you want.
Or even something like this
^(.+?)[a-zA-Z]+$

re.match starts at the beginning of the string, and re.search simply looks for it in the string. both return the first match. .group(0) is everything included in the match, if you had capturing groups, then .group(1) is the first group...etc etc... as opposed to normal convention where 0 is the first index, in this case, 0 is a special use case meaning everything.
in your case, depending on what you really need to capture, maybe using re.search is better. and instead of using 2 groups, you can use (\D+\d+) keep in mind, it will capture the first (non-digits,digits) group. it might be sufficient for you, but you might want to be more specific.
after reading your comment "everything before the letters at the end"
this regex is what you need:
regex = re.compile(r'(.+)[A-Za-z]')

Conditional Regular Expressions

I'm using Python and I want to use regular expressions to check if something "is part of an include list" but "is not part of an exclude list".
My include list is represented by a regex, for example:
And.*
Everything which starts with And.
Also the exclude list is represented by a regex, for example:
(?!Andrea)
Everything, but not the string Andrea. The exclude list is obviously a negation.
Using the two examples above, for example, I want to match everything which starts with And except for Andrea.
In the general case I have an includeRegEx and an excludeRegEx. I want to match everything which matchs includeRegEx but not matchs excludeRegEx. Attention: excludeRegEx is still in the negative form (as you can see in the example above), so it should be better to say: if something matches includeRegEx, I check if it also matches excludeRegEx, if it does, the match is satisfied. Is it possible to represent this in a single regular expression?
I think Conditional Regular Expressions could be the solution but I'm not really sure of that.
I'd like to see a working example in Python.
Thank you very much.

Why not put both in one regex?
And(?!rea$).*
Since the lookahead only "looks ahead" without consuming any characters, this works just fine (well, this is the whole point of lookaround, actually).
So, in Python:
if re.match(r"And(?!rea$).*", subject):
# Successful match
# Note that re.match always anchor the match
# to the start of the string.
else:
# Match attempt failed
From the wording of your question, I'm not sure if you're starting with two already finished lists of "match/don't match" pairs. In that case, you could simply combine them automatically by concatenating the regexes. This works just as well but is uglier:
(?!Andrea$)And.*
In general, then:
(?!excludeRegex$)includeRegex