Related
How do I convert a numpy.datetime64 object to a datetime.datetime (or Timestamp)?
In the following code, I create a datetime, timestamp and datetime64 objects.
import datetime
import numpy as np
import pandas as pd
dt = datetime.datetime(2012, 5, 1)
# A strange way to extract a Timestamp object, there's surely a better way?
ts = pd.DatetimeIndex([dt])[0]
dt64 = np.datetime64(dt)
In [7]: dt
Out[7]: datetime.datetime(2012, 5, 1, 0, 0)
In [8]: ts
Out[8]: <Timestamp: 2012-05-01 00:00:00>
In [9]: dt64
Out[9]: numpy.datetime64('2012-05-01T01:00:00.000000+0100')
Note: it's easy to get the datetime from the Timestamp:
In [10]: ts.to_datetime()
Out[10]: datetime.datetime(2012, 5, 1, 0, 0)
But how do we extract the datetime or Timestamp from a numpy.datetime64 (dt64)?
.
Update: a somewhat nasty example in my dataset (perhaps the motivating example) seems to be:
dt64 = numpy.datetime64('2002-06-28T01:00:00.000000000+0100')
which should be datetime.datetime(2002, 6, 28, 1, 0), and not a long (!) (1025222400000000000L)...
You can just use the pd.Timestamp constructor. The following diagram may be useful for this and related questions.
Welcome to hell.
You can just pass a datetime64 object to pandas.Timestamp:
In [16]: Timestamp(numpy.datetime64('2012-05-01T01:00:00.000000'))
Out[16]: <Timestamp: 2012-05-01 01:00:00>
I noticed that this doesn't work right though in NumPy 1.6.1:
numpy.datetime64('2012-05-01T01:00:00.000000+0100')
Also, pandas.to_datetime can be used (this is off of the dev version, haven't checked v0.9.1):
In [24]: pandas.to_datetime('2012-05-01T01:00:00.000000+0100')
Out[24]: datetime.datetime(2012, 5, 1, 1, 0, tzinfo=tzoffset(None, 3600))
To convert numpy.datetime64 to datetime object that represents time in UTC on numpy-1.8:
>>> from datetime import datetime
>>> import numpy as np
>>> dt = datetime.utcnow()
>>> dt
datetime.datetime(2012, 12, 4, 19, 51, 25, 362455)
>>> dt64 = np.datetime64(dt)
>>> ts = (dt64 - np.datetime64('1970-01-01T00:00:00Z')) / np.timedelta64(1, 's')
>>> ts
1354650685.3624549
>>> datetime.utcfromtimestamp(ts)
datetime.datetime(2012, 12, 4, 19, 51, 25, 362455)
>>> np.__version__
'1.8.0.dev-7b75899'
The above example assumes that a naive datetime object is interpreted by np.datetime64 as time in UTC.
To convert datetime to np.datetime64 and back (numpy-1.6):
>>> np.datetime64(datetime.utcnow()).astype(datetime)
datetime.datetime(2012, 12, 4, 13, 34, 52, 827542)
It works both on a single np.datetime64 object and a numpy array of np.datetime64.
Think of np.datetime64 the same way you would about np.int8, np.int16, etc and apply the same methods to convert between Python objects such as int, datetime and corresponding numpy objects.
Your "nasty example" works correctly:
>>> from datetime import datetime
>>> import numpy
>>> numpy.datetime64('2002-06-28T01:00:00.000000000+0100').astype(datetime)
datetime.datetime(2002, 6, 28, 0, 0)
>>> numpy.__version__
'1.6.2' # current version available via pip install numpy
I can reproduce the long value on numpy-1.8.0 installed as:
pip install git+https://github.com/numpy/numpy.git#egg=numpy-dev
The same example:
>>> from datetime import datetime
>>> import numpy
>>> numpy.datetime64('2002-06-28T01:00:00.000000000+0100').astype(datetime)
1025222400000000000L
>>> numpy.__version__
'1.8.0.dev-7b75899'
It returns long because for numpy.datetime64 type .astype(datetime) is equivalent to .astype(object) that returns Python integer (long) on numpy-1.8.
To get datetime object you could:
>>> dt64.dtype
dtype('<M8[ns]')
>>> ns = 1e-9 # number of seconds in a nanosecond
>>> datetime.utcfromtimestamp(dt64.astype(int) * ns)
datetime.datetime(2002, 6, 28, 0, 0)
To get datetime64 that uses seconds directly:
>>> dt64 = numpy.datetime64('2002-06-28T01:00:00.000000000+0100', 's')
>>> dt64.dtype
dtype('<M8[s]')
>>> datetime.utcfromtimestamp(dt64.astype(int))
datetime.datetime(2002, 6, 28, 0, 0)
The numpy docs say that the datetime API is experimental and may change in future numpy versions.
I think there could be a more consolidated effort in an answer to better explain the relationship between Python's datetime module, numpy's datetime64/timedelta64 and pandas' Timestamp/Timedelta objects.
The datetime standard library of Python
The datetime standard library has four main objects
time - only time, measured in hours, minutes, seconds and microseconds
date - only year, month and day
datetime - All components of time and date
timedelta - An amount of time with maximum unit of days
Create these four objects
>>> import datetime
>>> datetime.time(hour=4, minute=3, second=10, microsecond=7199)
datetime.time(4, 3, 10, 7199)
>>> datetime.date(year=2017, month=10, day=24)
datetime.date(2017, 10, 24)
>>> datetime.datetime(year=2017, month=10, day=24, hour=4, minute=3, second=10, microsecond=7199)
datetime.datetime(2017, 10, 24, 4, 3, 10, 7199)
>>> datetime.timedelta(days=3, minutes = 55)
datetime.timedelta(3, 3300)
>>> # add timedelta to datetime
>>> datetime.timedelta(days=3, minutes = 55) + \
datetime.datetime(year=2017, month=10, day=24, hour=4, minute=3, second=10, microsecond=7199)
datetime.datetime(2017, 10, 27, 4, 58, 10, 7199)
NumPy's datetime64 and timedelta64 objects
NumPy has no separate date and time objects, just a single datetime64 object to represent a single moment in time. The datetime module's datetime object has microsecond precision (one-millionth of a second). NumPy's datetime64 object allows you to set its precision from hours all the way to attoseconds (10 ^ -18). It's constructor is more flexible and can take a variety of inputs.
Construct NumPy's datetime64 and timedelta64 objects
Pass an integer with a string for the units. See all units here. It gets converted to that many units after the UNIX epoch: Jan 1, 1970
>>> np.datetime64(5, 'ns')
numpy.datetime64('1970-01-01T00:00:00.000000005')
>>> np.datetime64(1508887504, 's')
numpy.datetime64('2017-10-24T23:25:04')
You can also use strings as long as they are in ISO 8601 format.
>>> np.datetime64('2017-10-24')
numpy.datetime64('2017-10-24')
Timedeltas have a single unit
>>> np.timedelta64(5, 'D') # 5 days
>>> np.timedelta64(10, 'h') 10 hours
Can also create them by subtracting two datetime64 objects
>>> np.datetime64('2017-10-24T05:30:45.67') - np.datetime64('2017-10-22T12:35:40.123')
numpy.timedelta64(147305547,'ms')
Pandas Timestamp and Timedelta build much more functionality on top of NumPy
A pandas Timestamp is a moment in time very similar to a datetime but with much more functionality. You can construct them with either pd.Timestamp or pd.to_datetime.
>>> pd.Timestamp(1239.1238934) #defaults to nanoseconds
Timestamp('1970-01-01 00:00:00.000001239')
>>> pd.Timestamp(1239.1238934, unit='D') # change units
Timestamp('1973-05-24 02:58:24.355200')
>>> pd.Timestamp('2017-10-24 05') # partial strings work
Timestamp('2017-10-24 05:00:00')
pd.to_datetime works very similarly (with a few more options) and can convert a list of strings into Timestamps.
>>> pd.to_datetime('2017-10-24 05')
Timestamp('2017-10-24 05:00:00')
>>> pd.to_datetime(['2017-1-1', '2017-1-2'])
DatetimeIndex(['2017-01-01', '2017-01-02'], dtype='datetime64[ns]', freq=None)
Converting Python datetime to datetime64 and Timestamp
>>> dt = datetime.datetime(year=2017, month=10, day=24, hour=4,
minute=3, second=10, microsecond=7199)
>>> np.datetime64(dt)
numpy.datetime64('2017-10-24T04:03:10.007199')
>>> pd.Timestamp(dt) # or pd.to_datetime(dt)
Timestamp('2017-10-24 04:03:10.007199')
Converting numpy datetime64 to datetime and Timestamp
>>> dt64 = np.datetime64('2017-10-24 05:34:20.123456')
>>> unix_epoch = np.datetime64(0, 's')
>>> one_second = np.timedelta64(1, 's')
>>> seconds_since_epoch = (dt64 - unix_epoch) / one_second
>>> seconds_since_epoch
1508823260.123456
>>> datetime.datetime.utcfromtimestamp(seconds_since_epoch)
>>> datetime.datetime(2017, 10, 24, 5, 34, 20, 123456)
Convert to Timestamp
>>> pd.Timestamp(dt64)
Timestamp('2017-10-24 05:34:20.123456')
Convert from Timestamp to datetime and datetime64
This is quite easy as pandas timestamps are very powerful
>>> ts = pd.Timestamp('2017-10-24 04:24:33.654321')
>>> ts.to_pydatetime() # Python's datetime
datetime.datetime(2017, 10, 24, 4, 24, 33, 654321)
>>> ts.to_datetime64()
numpy.datetime64('2017-10-24T04:24:33.654321000')
>>> dt64.tolist()
datetime.datetime(2012, 5, 1, 0, 0)
For DatetimeIndex, the tolist returns a list of datetime objects. For a single datetime64 object it returns a single datetime object.
One option is to use str, and then to_datetime (or similar):
In [11]: str(dt64)
Out[11]: '2012-05-01T01:00:00.000000+0100'
In [12]: pd.to_datetime(str(dt64))
Out[12]: datetime.datetime(2012, 5, 1, 1, 0, tzinfo=tzoffset(None, 3600))
Note: it is not equal to dt because it's become "offset-aware":
In [13]: pd.to_datetime(str(dt64)).replace(tzinfo=None)
Out[13]: datetime.datetime(2012, 5, 1, 1, 0)
This seems inelegant.
.
Update: this can deal with the "nasty example":
In [21]: dt64 = numpy.datetime64('2002-06-28T01:00:00.000000000+0100')
In [22]: pd.to_datetime(str(dt64)).replace(tzinfo=None)
Out[22]: datetime.datetime(2002, 6, 28, 1, 0)
If you want to convert an entire pandas series of datetimes to regular python datetimes, you can also use .to_pydatetime().
pd.date_range('20110101','20110102',freq='H').to_pydatetime()
> [datetime.datetime(2011, 1, 1, 0, 0) datetime.datetime(2011, 1, 1, 1, 0)
datetime.datetime(2011, 1, 1, 2, 0) datetime.datetime(2011, 1, 1, 3, 0)
....
It also supports timezones:
pd.date_range('20110101','20110102',freq='H').tz_localize('UTC').tz_convert('Australia/Sydney').to_pydatetime()
[ datetime.datetime(2011, 1, 1, 11, 0, tzinfo=<DstTzInfo 'Australia/Sydney' EST+11:00:00 DST>)
datetime.datetime(2011, 1, 1, 12, 0, tzinfo=<DstTzInfo 'Australia/Sydney' EST+11:00:00 DST>)
....
NOTE: If you are operating on a Pandas Series you cannot call to_pydatetime() on the entire series. You will need to call .to_pydatetime() on each individual datetime64 using a list comprehension or something similar:
datetimes = [val.to_pydatetime() for val in df.problem_datetime_column]
This post has been up for 4 years and I still struggled with this conversion problem - so the issue is still active in 2017 in some sense. I was somewhat shocked that the numpy documentation does not readily offer a simple conversion algorithm but that's another story.
I have come across another way to do the conversion that only involves modules numpy and datetime, it does not require pandas to be imported which seems to me to be a lot of code to import for such a simple conversion. I noticed that datetime64.astype(datetime.datetime) will return a datetime.datetime object if the original datetime64 is in micro-second units while other units return an integer timestamp. I use module xarray for data I/O from Netcdf files which uses the datetime64 in nanosecond units making the conversion fail unless you first convert to micro-second units. Here is the example conversion code,
import numpy as np
import datetime
def convert_datetime64_to_datetime( usert: np.datetime64 )->datetime.datetime:
t = np.datetime64( usert, 'us').astype(datetime.datetime)
return t
Its only tested on my machine, which is Python 3.6 with a recent 2017 Anaconda distribution. I have only looked at scalar conversion and have not checked array based conversions although I'm guessing it will be good. Nor have I looked at the numpy datetime64 source code to see if the operation makes sense or not.
import numpy as np
import pandas as pd
def np64toDate(np64):
return pd.to_datetime(str(np64)).replace(tzinfo=None).to_datetime()
use this function to get pythons native datetime object
I've come back to this answer more times than I can count, so I decided to throw together a quick little class, which converts a Numpy datetime64 value to Python datetime value. I hope it helps others out there.
from datetime import datetime
import pandas as pd
class NumpyConverter(object):
#classmethod
def to_datetime(cls, dt64, tzinfo=None):
"""
Converts a Numpy datetime64 to a Python datetime.
:param dt64: A Numpy datetime64 variable
:type dt64: numpy.datetime64
:param tzinfo: The timezone the date / time value is in
:type tzinfo: pytz.timezone
:return: A Python datetime variable
:rtype: datetime
"""
ts = pd.to_datetime(dt64)
if tzinfo is not None:
return datetime(ts.year, ts.month, ts.day, ts.hour, ts.minute, ts.second, tzinfo=tzinfo)
return datetime(ts.year, ts.month, ts.day, ts.hour, ts.minute, ts.second)
I'm gonna keep this in my tool bag, something tells me I'll need it again.
I did like this
import pandas as pd
# Custom function to convert Pandas Datetime to Timestamp
def toTimestamp(data):
return data.timestamp()
# Read a csv file
df = pd.read_csv("friends.csv")
# Replace the "birthdate" column by:
# 1. Transform to datetime
# 2. Apply the custom function to the column just converted
df["birthdate"] = pd.to_datetime(df["birthdate"]).apply(toTimestamp)
Some solutions work well for me but numpy will deprecate some parameters.
The solution that work better for me is to read the date as a pandas datetime and excract explicitly the year, month and day of a pandas object.
The following code works for the most common situation.
def format_dates(dates):
dt = pd.to_datetime(dates)
try: return [datetime.date(x.year, x.month, x.day) for x in dt]
except TypeError: return datetime.date(dt.year, dt.month, dt.day)
Only way I managed to convert a column 'date' in pandas dataframe containing time info to numpy array was as following: (dataframe is read from csv file "csvIn.csv")
import pandas as pd
import numpy as np
df = pd.read_csv("csvIn.csv")
df["date"] = pd.to_datetime(df["date"])
timestamps = np.array([np.datetime64(value) for dummy, value in df["date"].items()])
indeed, all of these datetime types can be difficult, and potentially problematic (must keep careful track of timezone information). here's what i have done, though i admit that i am concerned that at least part of it is "not by design". also, this can be made a bit more compact as needed.
starting with a numpy.datetime64 dt_a:
dt_a
numpy.datetime64('2015-04-24T23:11:26.270000-0700')
dt_a1 = dt_a.tolist() # yields a datetime object in UTC, but without tzinfo
dt_a1
datetime.datetime(2015, 4, 25, 6, 11, 26, 270000)
# now, make your "aware" datetime:
dt_a2=datetime.datetime(*list(dt_a1.timetuple()[:6]) + [dt_a1.microsecond], tzinfo=pytz.timezone('UTC'))
... and of course, that can be compressed into one line as needed.
I used pandas read_excel to load some time data from excel into python and saved in variable times. For example, times[0] = 2020-12-30, in Excel it's just 2020/12/30.
Now The type of times[0] is pandas._libs.tslibs.timestamps.Timestamp.
How can I convert it into DateTime? And if possible, can I convert it into a nanosecond?
In pandas, the timestamp default value is date and time. Moreover, if you want to get DateTime then use to_datetime and To get nanosecond set unit='ns'
pd.to_datetime(1490195805433502912, unit='ns')
Output
Timestamp('2017-03-22 15:16:45.433502912')
Read more datetime reference and to know more about timedelta, find the link
If you have a series of times
>>> times = pd.Series(pd.date_range('20180310', periods=2))
>>> times
0 2018-03-10
1 2018-03-11
dtype: datetime64[ns]
You can convert the Timestamp entries to datetime using the dt.to_pydatetime() function like so
>>> times.dt.to_pydatetime()
array([datetime.datetime(2018, 3, 10, 0, 0),
datetime.datetime(2018, 3, 11, 0, 0)], dtype=object)
However as per the documentation mentions:
Warning: Python’s datetime uses microsecond resolution, which is lower than pandas (nanosecond). The values are truncated.
How do I convert a numpy.datetime64 object to a datetime.datetime (or Timestamp)?
In the following code, I create a datetime, timestamp and datetime64 objects.
import datetime
import numpy as np
import pandas as pd
dt = datetime.datetime(2012, 5, 1)
# A strange way to extract a Timestamp object, there's surely a better way?
ts = pd.DatetimeIndex([dt])[0]
dt64 = np.datetime64(dt)
In [7]: dt
Out[7]: datetime.datetime(2012, 5, 1, 0, 0)
In [8]: ts
Out[8]: <Timestamp: 2012-05-01 00:00:00>
In [9]: dt64
Out[9]: numpy.datetime64('2012-05-01T01:00:00.000000+0100')
Note: it's easy to get the datetime from the Timestamp:
In [10]: ts.to_datetime()
Out[10]: datetime.datetime(2012, 5, 1, 0, 0)
But how do we extract the datetime or Timestamp from a numpy.datetime64 (dt64)?
.
Update: a somewhat nasty example in my dataset (perhaps the motivating example) seems to be:
dt64 = numpy.datetime64('2002-06-28T01:00:00.000000000+0100')
which should be datetime.datetime(2002, 6, 28, 1, 0), and not a long (!) (1025222400000000000L)...
You can just use the pd.Timestamp constructor. The following diagram may be useful for this and related questions.
Welcome to hell.
You can just pass a datetime64 object to pandas.Timestamp:
In [16]: Timestamp(numpy.datetime64('2012-05-01T01:00:00.000000'))
Out[16]: <Timestamp: 2012-05-01 01:00:00>
I noticed that this doesn't work right though in NumPy 1.6.1:
numpy.datetime64('2012-05-01T01:00:00.000000+0100')
Also, pandas.to_datetime can be used (this is off of the dev version, haven't checked v0.9.1):
In [24]: pandas.to_datetime('2012-05-01T01:00:00.000000+0100')
Out[24]: datetime.datetime(2012, 5, 1, 1, 0, tzinfo=tzoffset(None, 3600))
To convert numpy.datetime64 to datetime object that represents time in UTC on numpy-1.8:
>>> from datetime import datetime
>>> import numpy as np
>>> dt = datetime.utcnow()
>>> dt
datetime.datetime(2012, 12, 4, 19, 51, 25, 362455)
>>> dt64 = np.datetime64(dt)
>>> ts = (dt64 - np.datetime64('1970-01-01T00:00:00Z')) / np.timedelta64(1, 's')
>>> ts
1354650685.3624549
>>> datetime.utcfromtimestamp(ts)
datetime.datetime(2012, 12, 4, 19, 51, 25, 362455)
>>> np.__version__
'1.8.0.dev-7b75899'
The above example assumes that a naive datetime object is interpreted by np.datetime64 as time in UTC.
To convert datetime to np.datetime64 and back (numpy-1.6):
>>> np.datetime64(datetime.utcnow()).astype(datetime)
datetime.datetime(2012, 12, 4, 13, 34, 52, 827542)
It works both on a single np.datetime64 object and a numpy array of np.datetime64.
Think of np.datetime64 the same way you would about np.int8, np.int16, etc and apply the same methods to convert between Python objects such as int, datetime and corresponding numpy objects.
Your "nasty example" works correctly:
>>> from datetime import datetime
>>> import numpy
>>> numpy.datetime64('2002-06-28T01:00:00.000000000+0100').astype(datetime)
datetime.datetime(2002, 6, 28, 0, 0)
>>> numpy.__version__
'1.6.2' # current version available via pip install numpy
I can reproduce the long value on numpy-1.8.0 installed as:
pip install git+https://github.com/numpy/numpy.git#egg=numpy-dev
The same example:
>>> from datetime import datetime
>>> import numpy
>>> numpy.datetime64('2002-06-28T01:00:00.000000000+0100').astype(datetime)
1025222400000000000L
>>> numpy.__version__
'1.8.0.dev-7b75899'
It returns long because for numpy.datetime64 type .astype(datetime) is equivalent to .astype(object) that returns Python integer (long) on numpy-1.8.
To get datetime object you could:
>>> dt64.dtype
dtype('<M8[ns]')
>>> ns = 1e-9 # number of seconds in a nanosecond
>>> datetime.utcfromtimestamp(dt64.astype(int) * ns)
datetime.datetime(2002, 6, 28, 0, 0)
To get datetime64 that uses seconds directly:
>>> dt64 = numpy.datetime64('2002-06-28T01:00:00.000000000+0100', 's')
>>> dt64.dtype
dtype('<M8[s]')
>>> datetime.utcfromtimestamp(dt64.astype(int))
datetime.datetime(2002, 6, 28, 0, 0)
The numpy docs say that the datetime API is experimental and may change in future numpy versions.
I think there could be a more consolidated effort in an answer to better explain the relationship between Python's datetime module, numpy's datetime64/timedelta64 and pandas' Timestamp/Timedelta objects.
The datetime standard library of Python
The datetime standard library has four main objects
time - only time, measured in hours, minutes, seconds and microseconds
date - only year, month and day
datetime - All components of time and date
timedelta - An amount of time with maximum unit of days
Create these four objects
>>> import datetime
>>> datetime.time(hour=4, minute=3, second=10, microsecond=7199)
datetime.time(4, 3, 10, 7199)
>>> datetime.date(year=2017, month=10, day=24)
datetime.date(2017, 10, 24)
>>> datetime.datetime(year=2017, month=10, day=24, hour=4, minute=3, second=10, microsecond=7199)
datetime.datetime(2017, 10, 24, 4, 3, 10, 7199)
>>> datetime.timedelta(days=3, minutes = 55)
datetime.timedelta(3, 3300)
>>> # add timedelta to datetime
>>> datetime.timedelta(days=3, minutes = 55) + \
datetime.datetime(year=2017, month=10, day=24, hour=4, minute=3, second=10, microsecond=7199)
datetime.datetime(2017, 10, 27, 4, 58, 10, 7199)
NumPy's datetime64 and timedelta64 objects
NumPy has no separate date and time objects, just a single datetime64 object to represent a single moment in time. The datetime module's datetime object has microsecond precision (one-millionth of a second). NumPy's datetime64 object allows you to set its precision from hours all the way to attoseconds (10 ^ -18). It's constructor is more flexible and can take a variety of inputs.
Construct NumPy's datetime64 and timedelta64 objects
Pass an integer with a string for the units. See all units here. It gets converted to that many units after the UNIX epoch: Jan 1, 1970
>>> np.datetime64(5, 'ns')
numpy.datetime64('1970-01-01T00:00:00.000000005')
>>> np.datetime64(1508887504, 's')
numpy.datetime64('2017-10-24T23:25:04')
You can also use strings as long as they are in ISO 8601 format.
>>> np.datetime64('2017-10-24')
numpy.datetime64('2017-10-24')
Timedeltas have a single unit
>>> np.timedelta64(5, 'D') # 5 days
>>> np.timedelta64(10, 'h') 10 hours
Can also create them by subtracting two datetime64 objects
>>> np.datetime64('2017-10-24T05:30:45.67') - np.datetime64('2017-10-22T12:35:40.123')
numpy.timedelta64(147305547,'ms')
Pandas Timestamp and Timedelta build much more functionality on top of NumPy
A pandas Timestamp is a moment in time very similar to a datetime but with much more functionality. You can construct them with either pd.Timestamp or pd.to_datetime.
>>> pd.Timestamp(1239.1238934) #defaults to nanoseconds
Timestamp('1970-01-01 00:00:00.000001239')
>>> pd.Timestamp(1239.1238934, unit='D') # change units
Timestamp('1973-05-24 02:58:24.355200')
>>> pd.Timestamp('2017-10-24 05') # partial strings work
Timestamp('2017-10-24 05:00:00')
pd.to_datetime works very similarly (with a few more options) and can convert a list of strings into Timestamps.
>>> pd.to_datetime('2017-10-24 05')
Timestamp('2017-10-24 05:00:00')
>>> pd.to_datetime(['2017-1-1', '2017-1-2'])
DatetimeIndex(['2017-01-01', '2017-01-02'], dtype='datetime64[ns]', freq=None)
Converting Python datetime to datetime64 and Timestamp
>>> dt = datetime.datetime(year=2017, month=10, day=24, hour=4,
minute=3, second=10, microsecond=7199)
>>> np.datetime64(dt)
numpy.datetime64('2017-10-24T04:03:10.007199')
>>> pd.Timestamp(dt) # or pd.to_datetime(dt)
Timestamp('2017-10-24 04:03:10.007199')
Converting numpy datetime64 to datetime and Timestamp
>>> dt64 = np.datetime64('2017-10-24 05:34:20.123456')
>>> unix_epoch = np.datetime64(0, 's')
>>> one_second = np.timedelta64(1, 's')
>>> seconds_since_epoch = (dt64 - unix_epoch) / one_second
>>> seconds_since_epoch
1508823260.123456
>>> datetime.datetime.utcfromtimestamp(seconds_since_epoch)
>>> datetime.datetime(2017, 10, 24, 5, 34, 20, 123456)
Convert to Timestamp
>>> pd.Timestamp(dt64)
Timestamp('2017-10-24 05:34:20.123456')
Convert from Timestamp to datetime and datetime64
This is quite easy as pandas timestamps are very powerful
>>> ts = pd.Timestamp('2017-10-24 04:24:33.654321')
>>> ts.to_pydatetime() # Python's datetime
datetime.datetime(2017, 10, 24, 4, 24, 33, 654321)
>>> ts.to_datetime64()
numpy.datetime64('2017-10-24T04:24:33.654321000')
>>> dt64.tolist()
datetime.datetime(2012, 5, 1, 0, 0)
For DatetimeIndex, the tolist returns a list of datetime objects. For a single datetime64 object it returns a single datetime object.
One option is to use str, and then to_datetime (or similar):
In [11]: str(dt64)
Out[11]: '2012-05-01T01:00:00.000000+0100'
In [12]: pd.to_datetime(str(dt64))
Out[12]: datetime.datetime(2012, 5, 1, 1, 0, tzinfo=tzoffset(None, 3600))
Note: it is not equal to dt because it's become "offset-aware":
In [13]: pd.to_datetime(str(dt64)).replace(tzinfo=None)
Out[13]: datetime.datetime(2012, 5, 1, 1, 0)
This seems inelegant.
.
Update: this can deal with the "nasty example":
In [21]: dt64 = numpy.datetime64('2002-06-28T01:00:00.000000000+0100')
In [22]: pd.to_datetime(str(dt64)).replace(tzinfo=None)
Out[22]: datetime.datetime(2002, 6, 28, 1, 0)
If you want to convert an entire pandas series of datetimes to regular python datetimes, you can also use .to_pydatetime().
pd.date_range('20110101','20110102',freq='H').to_pydatetime()
> [datetime.datetime(2011, 1, 1, 0, 0) datetime.datetime(2011, 1, 1, 1, 0)
datetime.datetime(2011, 1, 1, 2, 0) datetime.datetime(2011, 1, 1, 3, 0)
....
It also supports timezones:
pd.date_range('20110101','20110102',freq='H').tz_localize('UTC').tz_convert('Australia/Sydney').to_pydatetime()
[ datetime.datetime(2011, 1, 1, 11, 0, tzinfo=<DstTzInfo 'Australia/Sydney' EST+11:00:00 DST>)
datetime.datetime(2011, 1, 1, 12, 0, tzinfo=<DstTzInfo 'Australia/Sydney' EST+11:00:00 DST>)
....
NOTE: If you are operating on a Pandas Series you cannot call to_pydatetime() on the entire series. You will need to call .to_pydatetime() on each individual datetime64 using a list comprehension or something similar:
datetimes = [val.to_pydatetime() for val in df.problem_datetime_column]
This post has been up for 4 years and I still struggled with this conversion problem - so the issue is still active in 2017 in some sense. I was somewhat shocked that the numpy documentation does not readily offer a simple conversion algorithm but that's another story.
I have come across another way to do the conversion that only involves modules numpy and datetime, it does not require pandas to be imported which seems to me to be a lot of code to import for such a simple conversion. I noticed that datetime64.astype(datetime.datetime) will return a datetime.datetime object if the original datetime64 is in micro-second units while other units return an integer timestamp. I use module xarray for data I/O from Netcdf files which uses the datetime64 in nanosecond units making the conversion fail unless you first convert to micro-second units. Here is the example conversion code,
import numpy as np
import datetime
def convert_datetime64_to_datetime( usert: np.datetime64 )->datetime.datetime:
t = np.datetime64( usert, 'us').astype(datetime.datetime)
return t
Its only tested on my machine, which is Python 3.6 with a recent 2017 Anaconda distribution. I have only looked at scalar conversion and have not checked array based conversions although I'm guessing it will be good. Nor have I looked at the numpy datetime64 source code to see if the operation makes sense or not.
import numpy as np
import pandas as pd
def np64toDate(np64):
return pd.to_datetime(str(np64)).replace(tzinfo=None).to_datetime()
use this function to get pythons native datetime object
I've come back to this answer more times than I can count, so I decided to throw together a quick little class, which converts a Numpy datetime64 value to Python datetime value. I hope it helps others out there.
from datetime import datetime
import pandas as pd
class NumpyConverter(object):
#classmethod
def to_datetime(cls, dt64, tzinfo=None):
"""
Converts a Numpy datetime64 to a Python datetime.
:param dt64: A Numpy datetime64 variable
:type dt64: numpy.datetime64
:param tzinfo: The timezone the date / time value is in
:type tzinfo: pytz.timezone
:return: A Python datetime variable
:rtype: datetime
"""
ts = pd.to_datetime(dt64)
if tzinfo is not None:
return datetime(ts.year, ts.month, ts.day, ts.hour, ts.minute, ts.second, tzinfo=tzinfo)
return datetime(ts.year, ts.month, ts.day, ts.hour, ts.minute, ts.second)
I'm gonna keep this in my tool bag, something tells me I'll need it again.
I did like this
import pandas as pd
# Custom function to convert Pandas Datetime to Timestamp
def toTimestamp(data):
return data.timestamp()
# Read a csv file
df = pd.read_csv("friends.csv")
# Replace the "birthdate" column by:
# 1. Transform to datetime
# 2. Apply the custom function to the column just converted
df["birthdate"] = pd.to_datetime(df["birthdate"]).apply(toTimestamp)
Some solutions work well for me but numpy will deprecate some parameters.
The solution that work better for me is to read the date as a pandas datetime and excract explicitly the year, month and day of a pandas object.
The following code works for the most common situation.
def format_dates(dates):
dt = pd.to_datetime(dates)
try: return [datetime.date(x.year, x.month, x.day) for x in dt]
except TypeError: return datetime.date(dt.year, dt.month, dt.day)
Only way I managed to convert a column 'date' in pandas dataframe containing time info to numpy array was as following: (dataframe is read from csv file "csvIn.csv")
import pandas as pd
import numpy as np
df = pd.read_csv("csvIn.csv")
df["date"] = pd.to_datetime(df["date"])
timestamps = np.array([np.datetime64(value) for dummy, value in df["date"].items()])
indeed, all of these datetime types can be difficult, and potentially problematic (must keep careful track of timezone information). here's what i have done, though i admit that i am concerned that at least part of it is "not by design". also, this can be made a bit more compact as needed.
starting with a numpy.datetime64 dt_a:
dt_a
numpy.datetime64('2015-04-24T23:11:26.270000-0700')
dt_a1 = dt_a.tolist() # yields a datetime object in UTC, but without tzinfo
dt_a1
datetime.datetime(2015, 4, 25, 6, 11, 26, 270000)
# now, make your "aware" datetime:
dt_a2=datetime.datetime(*list(dt_a1.timetuple()[:6]) + [dt_a1.microsecond], tzinfo=pytz.timezone('UTC'))
... and of course, that can be compressed into one line as needed.
I have a text file with many rows of data - the first piece of data in each row is a unix timestamp such as 1436472000. I am using numpy.loadtxt and in the parameters for converters I want to specify for it to convert the timestamp into whatever numpy understands as a date time. I know this needs to go after the 0: in the curly brackets, but I can't work out how to convert it. I know a converter can be used from matplotlib.dates.strpdate2num for normal dates, but I this won't work for unix timestamps.
Code:
timestamp, closep, highp, lowp, openp, volume = np.loadtxt(fileName,delimiter=",",unpack=True,converters={ 0: })
Thanks for help in advance, please ask if you would like me to clarify what I mean.
While converters can be convenient, they are slow because they are called once for each row of data. It is faster to convert the data after the timestamps are loaded into a NumPy array of integers:
x = np.array([1436472000, 1436472001])
x = np.asarray(x, dtype='datetime64[s]')
yields an array of NumPy datetime64s:
array(['2015-07-09T16:00:00-0400', '2015-07-09T16:00:01-0400'],
dtype='datetime64[s]')
To obtain Python datetime.datetimes use tolist():
>>> x.tolist()
# [datetime.datetime(2015, 7, 9, 20, 0),
# datetime.datetime(2015, 7, 9, 20, 0, 1)]
As you know, matplotlib datenums count the number of days since 0001-01-01
00:00:00 UTC, plus one. These are not timestamps (which count seconds since the
Epoch, 1970-01-01 00:00:00 UTC):
>>> matplotlib.dates.date2num(x.tolist())
# array([ 735788.83333333, 735788.83334491])
A function returns date and time in unicode format.
u'2014-03-06T04:38:51Z'
I wish to convert this to date and time format and subtract it with current datetime to get the number of days in between.
Thanks in advance
Check string is unicode
>>> import types
>>> type(u'2014-03-06T04:38:51Z') is types.UnicodeType
True
Converting strings to datetime:
>>> import datetime
>>> datetime.datetime.strptime(u'2014-03-06T04:38:51Z', '%Y-%m-%dT%H:%M:%SZ')
datetime.datetime(2014, 3, 6, 4, 38, 51)
Subtract from today to
>>> import datetime
>>> today = datetime.datetime.today()
>>> yourdate = datetime.datetime.strptime(u'2014-03-06T04:38:51Z', '%Y-%m-%dT%H:%M:%SZ')
>>> difference = today - yourdate
print str(difference)
First you have to convert your string to a datetime.datetime object.
import datetime
then = datetime.datetime.strptime(u'2014-03-06T04:38:51Z', "%Y-%m-%dT%H:%M:%SZ")
then represents itself as datetime.datetime(2014, 3, 6, 4, 38, 51), which looks about right. Then you have to get today's date as a datetime.datetime.
now = datetime.datetime.now()
Finally subtract it from your date (or vice versa - the question didn't make it clear).delta is a datetime.timedelta object that stores increments in days, seconds and microseconds. The latter two are always positive, the first can be negative.
for delta in (now-then, then-now):
print(delta, "::", delta.days, delta.seconds, delta.microseconds)
This prints out:
-1 day, 20:18:14.250142 :: -1 73094 250142
3:41:45.749858 :: 0 13305 749858
Best try it with a few examples to convince yourself it's correct.