I have a python3 script that I am calling in terminal; I do not use Python prefix to run it, since I did add #!/usr/local/bin/python3 in my script (I have python3 from brew, on OSX).
The interesting thing is that if I run the script in terminal, I get an import error because one of my custom module hasn't been found. If I run the same script in pycharm, it works fine.
I assume Python launch and read all the various path that I use for modules in the same way, in both pycharm and terminal, but it seems not the case. How do I set up my scripts so the modules are found, independently from their path?
I may run the same script from other machines too, so I want to be prepared and do the right thing from the start.
EDIT
I am running pycharm on OSX; Python3 is installed via Brew, but the symlink is in /usr/local/bin.
My script is running from a folder inside my home directory, so
/Users/tester/git/python_test_app/main/base/app_main.py
The custom modules are in the same folder of the main py script, but one level above: /Users/tester/git/python_test_app/main/pyutils.py
The import statement from app_main.py is
import main.pyutils as utilities
This is the stack trace that I get when running the script:
Traceback (most recent call last):
File "main/base/app_main.py", line 13, in <module>
import main.pyutils as utilities
ModuleNotFoundError: No module named 'main'
EDIT 2 and solution
Thanks to The answers, I was able to figure out that the issue is related to how Pycharm handle projects. Basically it somehow save the path where the project is; so calling an import will result in the project folder being parsed, and that's why it works fine from Pycharm.
In Python, unless PYTHONPATH has the path to my project or other modules that I wrote, it won't be able to find them, hence, raise the error.
FIX:
in my main module that I use to run the application, I did retrieve the path of the file; which I know being one level below the modules I need; so I can explicitly add the folder to the current sys.path. This will end up making possible for me to call the import successfully.
import sys
current_dir = os.path.dirname(__file__)
sys.path.insert(0, , current_dir)
The only downside is that every file and resource that I use in my project, has to be directly referred by full path; so I have to pass the current_dir around the various files in the project.
PyCharm has project interpreter settings. Verify these are the same as your system Python. Go to:
File menu
Settings
Project: <project name>
Project Interpreter
View the path to the Python executable/binary being used by the project in PyCharm and verify it matches what your system is calling (e.g., which python3)
Alternatively, it may be that you declared your sources root within PyCharm and the system cannot properly run the module as it exists in the path you're running it from (especially if inside a package). You can get around this using the -m parameter and calling it from Python.
You can also try running it from the Terminal inside PyCharm and see what it adds to the path before initializing the shell session (you can sometimes see this in your Run configurations also). If you are referring to modules not installed via pip / into the Python path but rather loaded into your project path, then this may be the culprit.
On PyCharm, next to the green "RUN" arrow press the box and then press edit configurations (see image)
There you'll have Working Directory - that path is where PyCharm is running that script from (without errors).
Try running it from the terminal within that path - that should solve your import errors.
I got a library called google-translate-python. https://github.com/terryyin/google-translate-python
Basically, I copied/pasted the translate.py file to my python27/lib directory. I imported it like so:
from translate import Translator
And I put in something like this:
theTranslate = Translator(to_lang="sp")
translation = theTranslate.translate("hello")
And I'm using pycharm btw so I haven't gotten any errors, it is saying the methods are there and everything.
However, I get the error: ImportError: cannot import name Translator
Did I import the library wrong? that's all I can think of. Because the methods are there and running.
I figured it out... the library I was trying to import had the same name as my actual python file. So my python file was called translate.py and my library I was trying to import was called translate. I don't know how to differentiate it.. but changing the name of my python file fixed it. wow.. that took about 3 hours to realize.
Does it show in the list of packages installed under Pycharm interpreter? You need to add the package to this list and then it becomes available to you for import. It is available as one of the packages there.
Based on the github page the package can be installed from the source using:
python setup.py install
Another option is to save the translate.py to the local directory or another directory.
If translate.py is not in the local directory you can add the module path using:
sys.path.append('PATH_TO_TRANSLATE.PY')
If you can't use pip the simplest way to get this installed would be to do download the source code (.zip file) and unzip it.
Open a terminal (where you have access to python) and change to the folder (cd <the path to the folder>) you have unzipped, and then run:
python setup.py install
This will make sure the files end up in the right location (which on Windows is actually in C:\Python27\Lib\site-packages).
I'm new to python and would like to install and use the pytesser OCR library. All of the other modules that I've installed, I've used easy_install, which has worked fine. But pytesser is the first that I've had to install by hand using Google Code's .zip file.
Per the instructions in the readme (https://code.google.com/p/pytesser/wiki/README) I extracted the contexts to my C:\Python27\Scripts file. However when I try:
from pytesser import *
within the Python Shell, I get the following error:
Traceback (most recent call last):
File "<pyshell#2>", line 1, in <module>
from pytesser import *
ImportError: No module named pytesser
Any ideas? Windows 7. Python 2.7. My other scripts using modules such as PIL, Scrapy, Numpy have been working fine.
Thanks,
Tom
I'm not sure if this is the ideal solution, but this works for me. Please do correct me if this is incorrect in any way.
Unzip the folder & paste it in your Python2x\Lib folder
Rename it to pytesser (I'm not too sure if this is a necessary step)
Duplicate the tesseract.py file and rename it as __init__.py
Open __init__.py
Change the line tesseract_exe_name = "tesseract" to
tesseract_exe_name = 'C:\Python27\Lib\pytesser\tesseract'
Done.
You should not use C:\Python27\Scripts for 3rd party modules, you should use C:\Python27\Lib\site-packages instead.
So I'm using w10 64 bits.
And it took me some time to understand how you have to install it to be able to use it.
How to :
https://code.google.com/archive/p/pytesser/downloads
download pytesser_v0.0.1.zip
unzip
move files in the project
rename import Image to "from PIL import Image" in the pytesser.py
=== Enjoy.
Further to Yaitzme answer - another fix you may need (I'm using Python Tools for Visual Studio on Windows 7 64-bit)...
Once I renamed the pytesser.py file to __init__ I had to put a double backslash in the line e.g.
tesseract_exe_name = ‘C:\Anaconda2\Lib\site-packages\pytesser\\tesseract’
as the single backslash '\tesseract' was interpreting the '\t' as a new tab symbol and breaking the path! Put my install instructions here
I suspect the problem is with Python not being able to find your C:\Python27\Scripts directory because it's not in your PYTHONPATH.
Python looks in certain directories for files when you run an import command, they're described here http://docs.python.org/2/tutorial/modules.html#the-module-search-path
Your main options are:
1) Tell Python to look in your Scripts folder. This involves adding the folder to your Python path, see here How to add to the pythonpath in windows 7?
2) Put your script in a folder which is already searched by Python. This is wRAR's answer, to use the standard Python 3rd-party modules directory, see here http://docs.python.org/2/install/index.html#how-installation-works
3) Have the pytesser file in Python's current directory. import os followed by os.getcwd() will show you python's current directory, where the code is running (in a sense). os.chdir("my/other/dir") changes the current directory. See How to know/change current directory in Python shell? for more detail.
You may got sth wrong.
I try pytesser yesterday, maybe you should not put the pytesser file into the script folder. try the working dir, alongside with your code.
>>> import pytesser
>>> print pytesser
<module 'pytesser' from 'E:\Desktop\jiaoben\OCR\pytesser.pyc'
Disclaimer: I am new to python and django but have Drupal programming experience. I'm using Windows 7 (same issues on Windows XP)
On python 2.7 and Django-1.3.1, I successfully created a default project
django-admin.py startproject djsite
Now, I need to "bootstrap" djsite.manage as explained here (http://www.pyinstaller.org/wiki/Recipe/DjangoApplication) in a file called bootstrap.py located in djsite's parent directory as follows:
import djsite.manage
djsite.manage.execute_manager(djsite.manage.settings,['manage.py', 'runserver'])
Yet, as soon as the compiler sees:
import djsite.manage
I get this:
"Error: Can't find the file 'settings.py' in the directory containing 'C:\Python27\Lib\site-packages\djsite\manage.pyc'. It appears you've customized things... You'll have to run django-admin.py, passing it your settings module." And, I don't know how to follow the error's advice in this situation.
However, if I instead issue the following in bootstrap.py:
import os, sys
sys.path.append(os.path.abspath('djsite'))
import djsite.manage
djsite.manage.execute_manager(djsite.manage.settings,['manage.py', 'runserver'])
the script works correctly, but it breaks Pyinstaller (I've already asked this question on that software's mailing list (http://groups.google.com/group/pyinstaller/browse_thread/thread/174a72e26c26a44c). Even if I add the path to the djsite in my PATH variable, I get the same error.
So my question here is this: Why does importing the manage.py module fail with this approach and how can I proceed? Thanks!
Try adding this to your bootstrap.py to inform it where your settings file lives:
import os
os.environ['DJANGO_SETTINGS_MODULE'] = 'djsite.settings'
This will assume that djsite is in your pythonpath. That is, if its located here: /path/to/my/djsite, then this should be in your pythonpath: /path/to/my
Actually the best way to be doing this from the start is to being using virtualenv which will ensure that your environment is correct. I feel like that had to have been part of your tutorial if I remember bootstrap at all. If you are using virtualenv, make sure you remembered to source bin/activate
If that doesn't work, you can try altering the runserver command:
args = ['manage.py', 'runserver', '--settings=/path/to/my/djsite/settings.py']
djsite.manage.execute_manager(djsite.manage.settings, args)
Python is installed in a local directory.
My directory tree looks like this:
(local directory)/site-packages/toolkit/interface.py
My code is in here:
(local directory)/site-packages/toolkit/examples/mountain.py
To run the example, I write python mountain.py, and in the code I have:
from toolkit.interface import interface
And I get the error:
Traceback (most recent call last):
File "mountain.py", line 28, in ?
from toolkit.interface import interface
ImportError: No module named toolkit.interface
I have already checked sys.path and there I have the directory /site-packages. Also, I have the file __init__.py.bin in the toolkit folder to indicate to Python that this is a package. I also have a __init__.py.bin in the examples directory.
I do not know why Python cannot find the file when it is in sys.path. Any ideas? Can it be a permissions problem? Do I need some execution permission?
Based on your comments to orip's post, I guess this is what happened:
You edited __init__.py on windows.
The windows editor added something non-printing, perhaps a carriage-return (end-of-line in Windows is CR/LF; in unix it is LF only), or perhaps a CTRL-Z (windows end-of-file).
You used WinSCP to copy the file to your unix box.
WinSCP thought: "This has something that's not basic text; I'll put a .bin extension to indicate binary data."
The missing __init__.py (now called __init__.py.bin) means python doesn't understand toolkit as a package.
You create __init__.py in the appropriate directory and everything works... ?
Does
(local directory)/site-packages/toolkit
have a __init__.py?
To make import walk through your directories every directory must have a __init__.py file.
I ran into something very similar when I did this exercise in LPTHW; I could never get Python to recognise that I had files in the directory I was calling from. But I was able to get it to work in the end. What I did, and what I recommend, is to try this:
(NOTE: From your initial post, I am assuming you are using an *NIX-based machine and are running things from the command line, so this advice is tailored to that. Since I run Ubuntu, this is what I did)
Change directory (cd) to the directory above the directory where your files are. In this case, you're trying to run the mountain.py file, and trying to call the toolkit.interface.py module, which are in separate directories. In this case, you would go to the directory that contains paths to both those files (or in other words, the closest directory that the paths of both those files share). Which in this case is the toolkit directory.
When you are in the toolkit directory, enter this line of code on your command line:
export PYTHONPATH=.
This sets your PYTHONPATH to ".", which basically means that your PYTHONPATH will now look for any called files within the directory you are currently in, (and more to the point, in the sub-directory branches of the directory you are in. So it doesn't just look in your current directory, but in all the directories that are in your current directory).
After you've set your PYTHONPATH in the step above, run your module from your current directory (the toolkit directory). Python should now find and load the modules you specified.
On *nix, also make sure that PYTHONPATH is configured correctly, especially that it has this format:
.:/usr/local/lib/python
(Mind the .: at the beginning, so that it can search on the current directory, too.)
It may also be in other locations, depending on the version:
.:/usr/lib/python
.:/usr/lib/python2.6
.:/usr/lib/python2.7 and etc.
You are reading this answer says that your __init__.py is in the right place, you have installed all the dependencies and you are still getting the ImportError.
I was facing a similar issue except that my program would run fine when ran using PyCharm but the above error when I would run it from the terminal. After digging further, I found out that PYTHONPATH didn't have the entry for the project directory. So, I set PYTHONPATH per Import statement works on PyCharm but not from terminal:
export PYTHONPATH=$PYTHONPATH:`pwd` (OR your project root directory)
There's another way to do this using sys.path as:
import sys
sys.path.insert(0,'<project directory>') OR
sys.path.append('<project directory>')
You can use insert/append based on the order in which you want your project to be searched.
Using PyCharm (part of the JetBrains suite) you need to define your script directory as Source:
Right Click > Mark Directory as > Sources Root
For me, it was something really stupid. I installed the library using pip3 install but was running my program as python program.py as opposed to python3 program.py.
I solved my own problem, and I will write a summary of the things that were wrong and the solution:
The file needs to be called exactly __init__.py. If the extension is different such as in my case .py.bin then Python cannot move through the directories and then it cannot find the modules. To edit the files you need to use a Linux editor, such as vi or nano. If you use a Windows editor this will write some hidden characters.
Another problem that was affecting it was that I had another Python version installed by the root, so if someone is working with a local installation of python, be sure that the Python installation that is running the programs is the local Python. To check this, just do which python, and see if the executable is the one that is in your local directory. If not, change the path, but be sure that the local Python directory is before than the other Python.
To mark a directory as a package you need a file named __init__.py, does this help?
an easy solution is to install the module using python -m pip install <library-name> instead of pip install <library-name>
you may use sudo in case of admin restrictions
To all those who still have this issue. I believe Pycharm gets confused with imports. For me, when i write 'from namespace import something', the previous line gets underlined in red, signaling that there is an error, but works. However ''from .namespace import something' doesn't get underlined, but also doesn't work.
Try
try:
from namespace import something
except NameError:
from .namespace import something
Yup. You need the directory to contain the __init__.py file, which is the file that initializes the package. Here, have a look at this.
The __init__.py files are required to make Python treat the directories as containing packages; this is done to prevent directories with a common name, such as string, from unintentionally hiding valid modules that occur later on the module search path. In the simplest case, __init__.py can just be an empty file, but it can also execute initialization code for the package or set the __all__ variable, described later.
If you have tried all methods provided above but failed, maybe your module has the same name as a built-in module. Or, a module with the same name existing in a folder that has a high priority in sys.path than your module's.
To debug, say your from foo.bar import baz complaints ImportError: No module named bar. Changing to import foo; print foo, which will show the path of foo. Is it what you expect?
If not, Either rename foo or use absolute imports.
You must have the file __ init__.py in the same directory where it's the file that you are importing.
You can not try to import a file that has the same name and be a file from 2 folders configured on the PYTHONPATH.
eg:
/etc/environment
PYTHONPATH=$PYTHONPATH:/opt/folder1:/opt/folder2
/opt/folder1/foo
/opt/folder2/foo
And, if you are trying to import foo file, python will not know which one you want.
from foo import ... >>> importerror: no module named foo
My two cents:
Spit:
Traceback (most recent call last):
File "bash\bash.py", line 454, in main
import bosh
File "Wrye Bash Launcher.pyw", line 63, in load_module
mod = imp.load_source(fullname,filename+ext,fp)
File "bash\bosh.py", line 69, in <module>
from game.oblivion.RecordGroups import MobWorlds, MobDials, MobICells, \
ImportError: No module named RecordGroups
This confused the hell out of me - went through posts and posts suggesting ugly syspath hacks (as you see my __init__.py were all there). Well turns out that game/oblivion.py and game/oblivion was confusing python
which spit out the rather unhelpful "No module named RecordGroups". I'd be interested in a workaround and/or links documenting this (same name) behavior -> EDIT (2017.01.24) - have a look at What If I Have a Module and a Package With The Same Name? Interestingly normally packages take precedence but apparently our launcher violates this.
EDIT (2015.01.17): I did not mention we use a custom launcher dissected here.
Fixed my issue by writing print (sys.path) and found out that python was using out of date packages despite a clean install. Deleting these made python automatically use the correct packages.
In my case, because I'm using PyCharm and PyCharm create a 'venv' for every project in project folder, but it is only a mini env of python. Although you have installed the libraries you need in Python, but in your custom project 'venv', it is not available. This is the real reason of 'ImportError: No module named xxxxxx' occurred in PyCharm.
To resolve this issue, you must add libraries to your project custom env by these steps:
In PyCharm, from menu 'File'->Settings
In Settings dialog, Project: XXXProject->Project Interpreter
Click "Add" button, it will show you 'Available Packages' dialog
Search your library, click 'Install Package'
Then, all you needed package will be installed in you project custom 'venv' folder.
Enjoy.
Linux: Imported modules are located in /usr/local/lib/python2.7/dist-packages
If you're using a module compiled in C, don't forget to chmod the .so file after sudo setup.py install.
sudo chmod 755 /usr/local/lib/python2.7/dist-packages/*.so
In my case, the problem was I was linking to debug python & boost::Python, which requires that the extension be FooLib_d.pyd, not just FooLib.pyd; renaming the file or updating CMakeLists.txt properties fixed the error.
My problem was that I added the directory with the __init__.py file to PYTHONPATH, when actually I needed to add its parent directory.
For me, running the file as a module helped.
Instead of
python myapp/app.py
using
python -m myapp.app
It's not exactly the same but it might be a better approach in some cases.
If you are using a setup script/utility (e.g. setuptools) to deploy your package, don't forget to add the respective files/modules to the installer.
When supported, use find_packages() or similar to automatically add new packages to the setup script. This will absolutely save you from a headache, especially if you put your project aside for some time and then add something later on.
import setuptools
setuptools.setup(
name="example-pkg",
version="0.0.1",
author="Example Author",
author_email="author#example.com",
description="A small example package",
packages=setuptools.find_packages(),
classifiers=[
"Programming Language :: Python :: 3",
"Operating System :: OS Independent",
],
python_requires='>=3.6',
)
(Example taken from setuptools documentation)
I had the same problem (Python 2.7 Linux), I have found the solution and i would like to share it. In my case i had the structure below:
Booklet
-> __init__.py
-> Booklet.py
-> Question.py
default
-> __init_.py
-> main.py
In 'main.py' I had tried unsuccessfully all the combinations bellow:
from Booklet import Question
from Question import Question
from Booklet.Question import Question
from Booklet.Question import *
import Booklet.Question
# and many othet various combinations ...
The solution was much more simple than I thought. I renamed the folder "Booklet" into "booklet" and that's it. Now Python can import the class Question normally by using in 'main.py' the code:
from booklet.Booklet import Booklet
from booklet.Question import Question
from booklet.Question import AnotherClass
From this I can conclude that Package-Names (folders) like 'booklet' must start from lower-case, else Python confuses it with Class names and Filenames.
Apparently, this was not your problem, but John Fouhy's answer is very good and this thread has almost anything that can cause this issue. So, this is one more thing and I hope that maybe this could help others.
In linux server try dos2unix script_name
(remove all (if there is any) pyc files with command find . -name '*.pyc' -delete)
and re run in the case if you worked on script on windows
In my case, I was using sys.path.insert() to import a local module and was getting module not found from a different library. I had to put sys.path.insert() below the imports that reported module not found. I guess the best practice is to put sys.path.insert() at the bottom of your imports.
I've found that changing the name (via GUI) of aliased folders (Mac) can cause issues with loading modules. If the original folder name is changed, remake the symbolic link. I'm unsure how prevalent this behavior may be, but it was frustrating to debug.
another cause makes this issue
file.py
#!/bin/python
from bs4 import BeautifulSoup
if your default python is pyyhon2
$ file $(which python)
/sbin/python: symbolic link to python2
file.py need python3, for this case(bs4)
you can not execute this module with python2 like this:
$ python file.py
# or
$ file.py
# or
$ file.py # if locate in $PATH
Tow way to fix this error,
# should be to make python3 as default by symlink
$ rm $(which python) && ln -s $(which python3) /usr/bin/python
# or use alias
alias python='/usr/bin.../python3'
or change shebang in file.py to
#!/usr/bin/...python3
After just suffering the same issue I found my resolution was to delete all pyc files from my project, it seems like these cached files were somehow causing this error.
Easiest way I found to do this was to navigate to my project folder in Windows explorer and searching for *.pyc, then selecting all (Ctrl+A) and deleting them (Ctrl+X).
Its possible I could have resolved my issues by just deleting the specific pyc file but I never tried this
I faced the same problem: Import error. In addition the library've been installed 100% correctly. The source of the problem was that on my PC 3 version of python (anaconda packet) have been installed). This is why the library was installed no to the right place. After that I just changed to the proper version of python in the my IDE PyCharm.
I had the same error. It was caused by somebody creating a folder in the same folder as my script, the name of which conflicted with a module I was importing from elsewhere. Instead of importing the external module, it looked inside this folder which obviously didn't contain the expected modules.