Related
My objective is to add a vertical scroll bar to a frame which has several labels in it. The scroll bar should automatically enabled as soon as the labels inside the frame exceed the height of the frame. After searching through, I found this useful post. Based on that post I understand that in order to achieve what i want, (correct me if I am wrong, I am a beginner) I have to create a Frame first, then create a Canvas inside that frame and stick the scroll bar to that frame as well. After that, create another frame and put it inside the canvas as a window object. So, I finally come up with this:
from Tkinter import *
def data():
for i in range(50):
Label(frame,text=i).grid(row=i,column=0)
Label(frame,text="my text"+str(i)).grid(row=i,column=1)
Label(frame,text="..........").grid(row=i,column=2)
def myfunction(event):
canvas.configure(scrollregion=canvas.bbox("all"),width=200,height=200)
root=Tk()
sizex = 800
sizey = 600
posx = 100
posy = 100
root.wm_geometry("%dx%d+%d+%d" % (sizex, sizey, posx, posy))
myframe=Frame(root,relief=GROOVE,width=50,height=100,bd=1)
myframe.place(x=10,y=10)
canvas=Canvas(myframe)
frame=Frame(canvas)
myscrollbar=Scrollbar(myframe,orient="vertical",command=canvas.yview)
canvas.configure(yscrollcommand=myscrollbar.set)
myscrollbar.pack(side="right",fill="y")
canvas.pack(side="left")
canvas.create_window((0,0),window=frame,anchor='nw')
frame.bind("<Configure>",myfunction)
data()
root.mainloop()
Am I doing it right? Is there better/smarter way to achieve the output this code gave me?
Why must I use grid method? (I tried place method, but none of the labels appear on the canvas.)
What so special about using anchor='nw' when creating window on canvas?
Please keep your answer simple, as I am a beginner.
Here's example code adapted from the VerticalScrolledFrame page on the now defunct Tkinter Wiki that's been modified to run on Python 2.7 and 3+.
try: # Python 2
import tkinter as tk
import tkinter.ttk as ttk
from tkinter.constants import *
except ImportError: # Python 2
import Tkinter as tk
import ttk
from tkinter.constants import *
# Based on
# https://web.archive.org/web/20170514022131id_/http://tkinter.unpythonic.net/wiki/VerticalScrolledFrame
class VerticalScrolledFrame(ttk.Frame):
"""A pure Tkinter scrollable frame that actually works!
* Use the 'interior' attribute to place widgets inside the scrollable frame.
* Construct and pack/place/grid normally.
* This frame only allows vertical scrolling.
"""
def __init__(self, parent, *args, **kw):
ttk.Frame.__init__(self, parent, *args, **kw)
# Create a canvas object and a vertical scrollbar for scrolling it.
vscrollbar = ttk.Scrollbar(self, orient=VERTICAL)
vscrollbar.pack(fill=Y, side=RIGHT, expand=FALSE)
canvas = tk.Canvas(self, bd=0, highlightthickness=0,
yscrollcommand=vscrollbar.set)
canvas.pack(side=LEFT, fill=BOTH, expand=TRUE)
vscrollbar.config(command=canvas.yview)
# Reset the view
canvas.xview_moveto(0)
canvas.yview_moveto(0)
# Create a frame inside the canvas which will be scrolled with it.
self.interior = interior = ttk.Frame(canvas)
interior_id = canvas.create_window(0, 0, window=interior,
anchor=NW)
# Track changes to the canvas and frame width and sync them,
# also updating the scrollbar.
def _configure_interior(event):
# Update the scrollbars to match the size of the inner frame.
size = (interior.winfo_reqwidth(), interior.winfo_reqheight())
canvas.config(scrollregion="0 0 %s %s" % size)
if interior.winfo_reqwidth() != canvas.winfo_width():
# Update the canvas's width to fit the inner frame.
canvas.config(width=interior.winfo_reqwidth())
interior.bind('<Configure>', _configure_interior)
def _configure_canvas(event):
if interior.winfo_reqwidth() != canvas.winfo_width():
# Update the inner frame's width to fill the canvas.
canvas.itemconfigure(interior_id, width=canvas.winfo_width())
canvas.bind('<Configure>', _configure_canvas)
if __name__ == "__main__":
class SampleApp(tk.Tk):
def __init__(self, *args, **kwargs):
root = tk.Tk.__init__(self, *args, **kwargs)
self.frame = VerticalScrolledFrame(root)
self.frame.pack()
self.label = ttk.Label(self, text="Shrink the window to activate the scrollbar.")
self.label.pack()
buttons = []
for i in range(10):
buttons.append(ttk.Button(self.frame.interior, text="Button " + str(i)))
buttons[-1].pack()
app = SampleApp()
app.mainloop()
It does not yet have the mouse wheel bound to the scrollbar but it is possible. Scrolling with the wheel can get a bit bumpy, though.
edit:
to 1)
IMHO scrolling frames is somewhat tricky in Tkinter and does not seem to be done a lot. It seems there is no elegant way to do it.
One problem with your code is that you have to set the canvas size manually - that's what the example code I posted solves.
to 2)
You are talking about the data function? Place works for me, too. (In general I prefer grid).
to 3)
Well, it positions the window on the canvas.
One thing I noticed is that your example handles mouse wheel scrolling by default while the one I posted does not. Will have to look at that some time.
"Am i doing it right?Is there better/smarter way to achieve the output this code gave me?"
Generally speaking, yes, you're doing it right. Tkinter has no native scrollable container other than the canvas. As you can see, it's really not that difficult to set up. As your example shows, it only takes 5 or 6 lines of code to make it work -- depending on how you count lines.
"Why must i use grid method?(i tried place method, but none of the labels appear on the canvas?)"
You ask about why you must use grid. There is no requirement to use grid. Place, grid and pack can all be used. It's simply that some are more naturally suited to particular types of problems. In this case it looks like you're creating an actual grid -- rows and columns of labels -- so grid is the natural choice.
"What so special about using anchor='nw' when creating window on canvas?"
The anchor tells you what part of the window is positioned at the coordinates you give. By default, the center of the window will be placed at the coordinate. In the case of your code above, you want the upper left ("northwest") corner to be at the coordinate.
Please see my class that is a scrollable frame. It's vertical scrollbar is binded to <Mousewheel> event as well. So, all you have to do is to create a frame, fill it with widgets the way you like, and then make this frame a child of my ScrolledWindow.scrollwindow. Feel free to ask if something is unclear.
Used a lot from # Brayan Oakley answers to close to this questions
class ScrolledWindow(tk.Frame):
"""
1. Master widget gets scrollbars and a canvas. Scrollbars are connected
to canvas scrollregion.
2. self.scrollwindow is created and inserted into canvas
Usage Guideline:
Assign any widgets as children of <ScrolledWindow instance>.scrollwindow
to get them inserted into canvas
__init__(self, parent, canv_w = 400, canv_h = 400, *args, **kwargs)
docstring:
Parent = master of scrolled window
canv_w - width of canvas
canv_h - height of canvas
"""
def __init__(self, parent, canv_w = 400, canv_h = 400, *args, **kwargs):
"""Parent = master of scrolled window
canv_w - width of canvas
canv_h - height of canvas
"""
super().__init__(parent, *args, **kwargs)
self.parent = parent
# creating a scrollbars
self.xscrlbr = ttk.Scrollbar(self.parent, orient = 'horizontal')
self.xscrlbr.grid(column = 0, row = 1, sticky = 'ew', columnspan = 2)
self.yscrlbr = ttk.Scrollbar(self.parent)
self.yscrlbr.grid(column = 1, row = 0, sticky = 'ns')
# creating a canvas
self.canv = tk.Canvas(self.parent)
self.canv.config(relief = 'flat',
width = 10,
heigh = 10, bd = 2)
# placing a canvas into frame
self.canv.grid(column = 0, row = 0, sticky = 'nsew')
# accociating scrollbar comands to canvas scroling
self.xscrlbr.config(command = self.canv.xview)
self.yscrlbr.config(command = self.canv.yview)
# creating a frame to inserto to canvas
self.scrollwindow = ttk.Frame(self.parent)
self.canv.create_window(0, 0, window = self.scrollwindow, anchor = 'nw')
self.canv.config(xscrollcommand = self.xscrlbr.set,
yscrollcommand = self.yscrlbr.set,
scrollregion = (0, 0, 100, 100))
self.yscrlbr.lift(self.scrollwindow)
self.xscrlbr.lift(self.scrollwindow)
self.scrollwindow.bind('<Configure>', self._configure_window)
self.scrollwindow.bind('<Enter>', self._bound_to_mousewheel)
self.scrollwindow.bind('<Leave>', self._unbound_to_mousewheel)
return
def _bound_to_mousewheel(self, event):
self.canv.bind_all("<MouseWheel>", self._on_mousewheel)
def _unbound_to_mousewheel(self, event):
self.canv.unbind_all("<MouseWheel>")
def _on_mousewheel(self, event):
self.canv.yview_scroll(int(-1*(event.delta/120)), "units")
def _configure_window(self, event):
# update the scrollbars to match the size of the inner frame
size = (self.scrollwindow.winfo_reqwidth(), self.scrollwindow.winfo_reqheight())
self.canv.config(scrollregion='0 0 %s %s' % size)
if self.scrollwindow.winfo_reqwidth() != self.canv.winfo_width():
# update the canvas's width to fit the inner frame
self.canv.config(width = self.scrollwindow.winfo_reqwidth())
if self.scrollwindow.winfo_reqheight() != self.canv.winfo_height():
# update the canvas's width to fit the inner frame
self.canv.config(height = self.scrollwindow.winfo_reqheight())
For anyone who stumbles across this (as it did when looking for my own gist) I maintain a gist for exactly this purpose at https://gist.github.com/mp035/9f2027c3ef9172264532fcd6262f3b01 It has scrollwheel support for various operating systems, is commented, and has a built-in demo in the file.
We can add scroll bar even without using Canvas. I have read it in many other post we can't add vertical scroll bar in frame directly etc etc. But after doing many experiment found out way to add vertical as well as horizontal scroll bar :). Please find below code which is used to create scroll bar in treeView and frame.
f = Tkinter.Frame(self.master,width=3)
f.grid(row=2, column=0, columnspan=8, rowspan=10, pady=30, padx=30)
f.config(width=5)
self.tree = ttk.Treeview(f, selectmode="extended")
scbHDirSel =tk.Scrollbar(f, orient=Tkinter.HORIZONTAL, command=self.tree.xview)
scbVDirSel =tk.Scrollbar(f, orient=Tkinter.VERTICAL, command=self.tree.yview)
self.tree.configure(yscrollcommand=scbVDirSel.set, xscrollcommand=scbHDirSel.set)
self.tree["columns"] = (self.columnListOutput)
self.tree.column("#0", width=40)
self.tree.heading("#0", text='SrNo', anchor='w')
self.tree.grid(row=2, column=0, sticky=Tkinter.NSEW,in_=f, columnspan=10, rowspan=10)
scbVDirSel.grid(row=2, column=10, rowspan=10, sticky=Tkinter.NS, in_=f)
scbHDirSel.grid(row=14, column=0, rowspan=2, sticky=Tkinter.EW,in_=f)
f.rowconfigure(0, weight=1)
f.columnconfigure(0, weight=1)
It is nessesery to configure Scrollbar in case of using with Canvas
by sending to Canvas xscrollcommand attribute Scrollbar.set method and
to Scrollbar command attribute Canvas.yview (xview) method.
Canvas.yview method after scrollbar was moved recieve *args in next formatting:
tuple('move_to', '<some_absolute_float_value_of_top_of_scrollbar_region>')
In case of implementing scrollability to widget,
Recieving region and translating scrollbar_region (whith element viewable and whith not) features must be created.
Region is `tuple(float, float)' representing open to see part of all elements.
Not ideal bechavior showed in this solution (without using tk.Canvas)
import tkinter as tk
from tkinter import ttk
class ItemizeFrame(ttk.Frame, list):
def __init__(self,
*args,
scroll_upd_callback = lambda x: x,
visible_els: int = 10,
**kwargs):
list.__init__(self)
ttk.Frame.__init__(self, *args, **kwargs)
ttk.Style().configure('Small.TButton', background='red', width=2, height=2, padx=3, pady=3)
ttk.Style().configure('Sep.TFrame', padx=3, pady=3)
self.scroll_upd_callback = scroll_upd_callback
self.visible_els = visible_els
self.visible_st_idx = 0
self.pseudo_scroll_element_cursor_line = 0.5*1/visible_els
def append(self, item: ttk.Widget, **kw):
e = item(self, **kw)
super().append(e)
e.pack(fill='x')
self._update_visible_els()
def _update_visable_id_callback(self):
for id_, entry_ in enumerate(self):
entry_.set_id(id_)
def pop(self, index=None):
e = super().pop(index)
e.destroy()
self._update_visible_els()
def __getitem__(self, idx) -> ttk.Widget:
return list.__getitem__(self, idx)
# indicators computing and application
#property
def visible_end_idx(self):
return self.visible_st_idx + self.visible_els -1
#property
def visible_area_ratio(self) -> tuple[float, float]:
total = len(self)
st_val = 0.0
end_val = 1.0
if total > self.visible_els:
end_val = 1.0 - (total-self.visible_end_idx)/total
st_val = self.visible_st_idx / total
st_val = st_val + self.pseudo_scroll_element_cursor_line
end_val = end_val + self.pseudo_scroll_element_cursor_line
return (st_val, end_val)
def _update_scroll_widget(self):
self.scroll_upd_callback(*self.visible_area_ratio)
def set_yview(self, move_to_ratio):
base_pseudo_ratio = 0.5*1/self.visible_els
total = len(self)
max_ratio = (total - self.visible_els)/total+base_pseudo_ratio
if move_to_ratio < 0:
possible_st_el_pseudo_part = base_pseudo_ratio
possible_st_el_idx = 0
if max_ratio < move_to_ratio:
possible_st_el_idx = total - self.visible_els
possible_st_el_pseudo_part = base_pseudo_ratio
else :
el_idx_raw = move_to_ratio * total
el_idx_round = round(el_idx_raw)
el_idx_pseudo = (el_idx_raw - el_idx_round)*1/self.visible_els
possible_st_el_idx = el_idx_round
possible_st_el_pseudo_part = el_idx_pseudo
self.visible_st_idx = possible_st_el_idx
self.pseudo_scroll_element_cursor_line = possible_st_el_pseudo_part
self._update_visible_els()
def _update_visible_els(self):
for el in self:
el.pack_forget()
for num, el in enumerate(self):
if self.visible_st_idx <= num and num <= self.visible_end_idx:
el.pack()
self._update_scroll_widget()
class ScrollableFrame(ttk.Frame):
def __init__(self, *args, **kwargs):
kw = dict(width=400, height=300)
kw.update(kwargs)
super().__init__(*args, **kw)
self.scroll = ttk.Scrollbar(self, command=self.on_scroll)
self.scroll.pack(expand=True, fill='y', side='right')
self.view = ItemizeFrame(
self,
scroll_upd_callback=self.scroll.set,
**kwargs
)
self.view.pack(expand=True, fill='both')#, side='left')
def on_scroll(self, *args, **kwargs):
value_raw = float(args[1])
self.view.set_yview(value_raw)
Usecase
class App(tk.Tk):
def __init__(self):
super().__init__()
self.frame = ScrollableFrame(self)
self.frame.pack()
def test_fill(self):
for i in range(15):
self.frame.view.append(ttk.Entry)
class Test:
#staticmethod
def v2():
app = App()
app.test_fill()
app.mainloop()
Test.v2()
After I watching many answers, I got it:
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
'''When window size change, canvas size will change,
use this line to change its item size (width).'''
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw") #canvas size is relative to window size.
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
# When the window size change, it will call this function
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
Specifies the size of the scrollable frame by changing canvas and scrollbar position and size.
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.place(relx=0.9, y=0, relwidth=0.1, relheight=0.5)
canvas.place(x=0, y=0, relwidth=0.9, relheight=0.5)
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
Specifies the size of the scrollable frame by writing them to outerFrame.
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
outerFrame = tk.Frame(root)
canvas = tk.Canvas(outerFrame, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(outerFrame, orient="vertical", command=canvas.yview)
canvas.config(yscrollcommand=vsb.set)
outerFrame.place(relx=0.25, rely=0.1, relwidth=0.5, relheight=0.5)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
The items inner the frame can use pack or grid (only choose one), but place cannot be used alone. If you want to use place, you need to expand the layout(height) with pack or grid first.
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
L1 = tk.Label(frame, text="我是Label")
L1.place(x=0, rely=0.5)
root.mainloop()
Use mouse wheel:
tkinter: binding mousewheel to scrollbar
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
def on_mouse_wheel(event, scale=3):
#only care event.delta is - or +, scroll down or up
if event.delta<0:
canvas.yview_scroll(scale, "units")
else:
canvas.yview_scroll(-scale, "units")
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
canvas.bind("<Enter>", lambda event: canvas.bind_all("<MouseWheel>", on_mouse_wheel)) # on mouse enter
canvas.bind("<Leave>", lambda event: canvas.unbind_all("<MouseWheel>")) # on mouse leave
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
Export to class:
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
class scrollFrame():
def __init__(self, **options):
outerFrame = tk.Frame(root)
canvas = tk.Canvas(outerFrame, highlightthickness=0)
vsb = tk.Scrollbar(outerFrame, orient="vertical", command=canvas.yview)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
frame = tk.Frame(canvas, **options)
wrapFrameId = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.config(yscrollcommand=vsb.set)
canvas.bind("<Configure>", lambda event: self.onFrameConfigure())
canvas.bind("<Enter>", lambda event: canvas.bind_all("<MouseWheel>", self.on_mouse_wheel)) # on mouse enter
canvas.bind("<Leave>", lambda event: canvas.unbind_all("<MouseWheel>")) # on mouse leave
self.outerFrame, self.canvas, self.vsb, self.frame, self.wrapFrameId = outerFrame, canvas, vsb, frame, wrapFrameId
def onFrameConfigure(self):
canvas = self.canvas
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(self.wrapFrameId, width=canvas.winfo_width())
def on_mouse_wheel(self, event, scale=3):
canvas = self.canvas
#only care event.delta is - or +, scroll down or up
if event.delta<0:
canvas.yview_scroll(scale, "units")
else:
canvas.yview_scroll(-scale, "units")
frame = scrollFrame(background="#FFFFFF")
frame.outerFrame.place(relx=0.15, rely=0.1, relwidth=0.7, relheight=0.8)
L1 = tk.Label(frame.frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame.frame)
input.pack()
root.mainloop()
According:
https://stackoverflow.com/a/3092341/19470749
https://stackoverflow.com/a/16198198/19470749
https://anzeljg.github.io/rin2/book2/2405/docs/tkinter/create_window.html
Not 100% sure if this solution is on topic (since it explicitely asks for a scrollable FRAME), but the text widget is basically a scrollable Frame.
From documentation of the Text widget:
"Like canvas widgets, text widgets can contain images and any other Tk widgets (including frames containing many other widgets). In a sense, this allows the text widget to work as a geometry manager in its own right. "
Text widgets are very easy to use, and can be made scrollable. So instead of using a special Class like the Scrollable Frame, I think the Text widget is a great option.
Below my code, for a basic example of a scrollable text widget holding 100 buttons:
from tkinter import Tk, Button, Text,Scrollbar
class test:
def __init__(self):
self.win = Tk()
text = Text(self.win, width=40, height=10, wrap = "none")
ys = Scrollbar(self.win, orient = 'vertical', command = text.yview)
text['yscrollcommand'] = ys.set
text.grid(column = 0, row = 0, sticky = 'nwes')
ys.grid(column = 1, row = 0, sticky = 'ns')
for x in range(1,100):
b = Button(text, text='Push Me')
text.window_create("end", window=b)
text.insert("end",'\n')
self.win.mainloop()
test = test()
This is at least the method I am going to use for my scrollable frames. Not sure if there is a better solution then the newline insertion to make the widgets organised vertically. But it works.
I'm trying to control multiple canvases widths with the mouse wheel. What I have so far is this:
import tkinter as tk
class App(tk.Frame):
row_amount = 3
def __init__(self, root):
super(App, self).__init__(root)
self.root = root
self.main_frame = tk.Frame(root)
self.main_frame.pack(expand=True, fill=tk.BOTH)
self.row_collection = RowCollection(root, self.main_frame)
for i in range(App.row_amount): self.row_collection.row()
window_height = App.row_amount * 100
window_width = root.winfo_screenwidth() - 30
root.geometry(f'{window_width}x{window_height}+0+0')
self.row_collection.right_frame.grid_columnconfigure(0, weight=1)
self.row_collection.left_frame.grid_columnconfigure(0, weight=1)
self.pack()
class RowCollection:
"""Collection of rows"""
def __init__(self, root, frame):
self.row_list = []
self.root = root
self.frame = frame
self.right_frame = tk.Frame(self.frame, bg='red')
self.right_frame.pack(side=tk.RIGHT, expand=tk.YES, fill=tk.BOTH)
self.left_frame = tk.Frame(self.frame)
self.left_frame.pack(side=tk.LEFT, fill=tk.Y)
self.scrollbar = tk.Scrollbar(self.right_frame, orient=tk.HORIZONTAL)
self.scrollbar.config(command=self.scroll_x)
def row(self):
row = Row(self)
self.row_list.append(row)
return row
def scroll_x(self, *args):
for row in self.row_list:
row.canvas.xview(*args)
def zoomer(self, event=None):
print('zooming')
for row in self.row_list:
scale_factor = 0.1
curr_width = row.canvas.winfo_reqwidth()
print(f'event delta={event.delta}')
if event.delta > 0:
row.canvas.config(width=curr_width * (1 + scale_factor))
elif event.delta < 0:
row.canvas.config(width=curr_width * (1 - scale_factor))
row.canvas.configure(scrollregion=row.canvas.bbox('all'))
class Row:
"""Every row consists of a label on the left side and a canvas with a line on the right side"""
row_count = 0
label_width = 15
line_weight = 3
line_yoffset = 3
padx = 20
def __init__(self, collection):
self.frame = collection.frame
self.root = collection.root
self.collection = collection
self.canvas = None
self.label = None
self.text = f'Canvas {Row.row_count}'
self.height = 100
self.root.update()
self.label = tk.Label(self.collection.left_frame,
text=self.text,
height=1,
width=Row.label_width,
relief='raised')
self.label.grid(row=Row.row_count, column=0, sticky='ns')
# configure row size to match future canvas height
self.collection.left_frame.grid_rowconfigure(Row.row_count, minsize=self.height)
self.root.update()
self.canvas = tk.Canvas(self.collection.right_frame,
width=10000,
height=self.height,
bg='white',
highlightthickness=0)
self.canvas.grid(row=Row.row_count, column=0, sticky=tk.W)
self.root.update()
# draw line
self.line = self.canvas.create_rectangle(self.padx,
self.canvas.winfo_height() - Row.line_yoffset,
self.canvas.winfo_width() - self.padx,
self.canvas.winfo_height() - Row.line_yoffset + Row.line_weight,
fill='#000000', width=0, tags='line')
# config canvas
self.canvas.config(scrollregion=self.canvas.bbox('all'))
self.canvas.config(xscrollcommand=self.collection.scrollbar.set)
self.canvas.bind('<Configure>', lambda event: self.canvas.configure(scrollregion=self.canvas.bbox('all')))
self.canvas.bind('<MouseWheel>', self.collection.zoomer)
# Create point at canvas edge to prevent scrolling from removing padding
self.bounding_point = self.canvas.create_rectangle(0, 0, 0, 0, width=0)
self.bounding_point = self.canvas.create_rectangle(self.canvas.winfo_width(), self.canvas.winfo_width(),
self.canvas.winfo_width(), self.canvas.winfo_width(),
width=0)
Row.row_count += 1
self.collection.scrollbar.grid(row=Row.row_count, column=0, sticky='ew')
if __name__ == '__main__':
root = tk.Tk()
app = App(root)
root.mainloop()
The canvases themselves are inside right_frame, and the number of canvases is given by row_amount. The left_frame contains labels for each of the canvases. The canvases should be allowed to be pretty wide, so I initially set a width value of 10000. Because of that, they start partially visible, with the rest being accessible via a scrollbar.
What I would like is for the mouse wheel to control the size of the canvas as a whole (that is, both what is currently visible and what could be viewed using the scrollbar), similar to what would happen in an audio or video editing software timeline.
Right now, when I use the mouse wheel, what seems to get resized is not the whole canvas, but only the 'visible' portion. Resize it to be small enough and you can start to see it's frame background on the right portion of the window.
What am I missing here?
What am I missing here?
I think what you're missing is that the drawable area of the canvas is not at all related to the physical size of the canvas widget. You do not need to resize the canvas once it has been created. You can draw well past the borders of the widget.
If you want to be able to scroll elements into view that are not part of the visible canvas, you must configure the scrollregion to define the area of the virtual canvas that should be visible.
You said in a comment you're trying to create a timeline. Here's an example of a canvas widget that "grows" by adding a tickmark every second. Notice that the canvas is only 500,100, but the drawable area gets extended every second.
import tkinter as tk
root = tk.Tk()
canvas = tk.Canvas(root, width=500, height=100, bg="black")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
hsb = tk.Scrollbar(root, orient="horizontal", command=canvas.xview)
canvas.configure(yscrollcommand=vsb.set, xscrollcommand=hsb.set)
canvas.grid(row=0, column=0, sticky="nsew")
vsb.grid(row=0, column=1, sticky="ns")
hsb.grid(row=1, column=0, sticky="ew")
root.grid_rowconfigure(0, weight=1)
root.grid_columnconfigure(0, weight=1)
counter = 0
def add_tick():
global counter
# get the current state of the scrollbar. We'll use this later
# to determine if we should auto-scroll
xview = canvas.xview()
# draw a new tickmark
counter += 1
x = counter * 50
canvas.create_text(x, 52, anchor="n", text=counter, fill="white")
canvas.create_line(x, 40, x, 50, width=3, fill="red")
# update the scrollable region to include the new tickmark
canvas.configure(scrollregion=canvas.bbox("all"))
# autoscroll, only if the widget was already scrolled
# as far to the right as possible
if int(xview[1]) == 1:
canvas.xview_moveto(1.0)
canvas.after(1000, add_tick)
add_tick()
root.mainloop()
I try to create a scrolling grid of frames. I will have a variable number of frames, so I want to specify the number of columns, but not the number of rows, though we can scroll down if it is too long.
I have written some code, but now I don't know how to specify that when creating a frame (a button + 2 scales) with sounds_buttons(), it belongs to a certain row and a certain column. Also, I won't always have a multiple of 5 for the number of frames, so the last row can be constituted of only 1,2,3 or 4 frames.
The goal would be to have something like that, but with an undetermined number of rows: tkinter Canvas Scrollbar with Grid?.
Thank you very much !
#!/usr/bin/env python3
# -*- coding:utf-8 -*-
# -------------------------------- Importation ------------------------------- #
import tkinter as tk
from tkinter import messagebox
# ------------------------------ Initialisation ------------------------------ #
root = tk.Tk()
width_screen, height_screen = root.winfo_screenwidth(), root.winfo_screenheight()
root.geometry("%dx%d+0+0" % (width_screen, height_screen))
# ----------------------- Creation of a list of sounds ----------------------- #
wav_files = ["a.wav","b.wav","c.wav","d.wav","e.wav","f.wav","g.wav","h.wav","i.wav","j.wav","k.wav","l.wav","m.wav","n.wav","o.wav","p.wav","q.wav","r.wav","s.wav","t.wav","u.wav","v.wav","w.wav","x.wav","y.wav","z.wav","aa.wav","bb.wav","cc.wav","dd.wav","ee.wav","ff.wav"]
# -------------------------- Vertical scrolled frame ------------------------- #
class VerticalScrolledFrame(tk.Frame):
def __init__(self, parent, *args, **kw):
tk.Frame.__init__(self, parent, *args, **kw)
# Create a frame for the canvas with non-zero row&column weights
self.frame_canvas = tk.Frame(self)
self.frame_canvas.grid(row=2, column=0, pady=(8, 0), sticky='nw')
self.frame_canvas.grid_rowconfigure(0, weight=1)
self.frame_canvas.grid_columnconfigure(0, weight=1)
# Set grid_propagate to False to allow buttons resizing later
self.frame_canvas.grid_propagate(False)
# create a canvas object and a vertical scrollbar for scrolling it
vscrollbar = tk.Scrollbar(self.frame_canvas, orient=tk.VERTICAL)
vscrollbar.grid(row=0, column=1, sticky='ns')
self.canvas = tk.Canvas(self.frame_canvas, bd=0, highlightthickness=0,
yscrollcommand=vscrollbar.set, width=root.winfo_screenwidth(), height=root.winfo_screenheight())
self.canvas.grid(row=0, column=0, sticky="news")
vscrollbar.config(command=self.canvas.yview)
self.canvas.bind_all("<MouseWheel>", self._on_mousewheel)
# reset the view
#canvas.xview_moveto(0)
#canvas.yview_moveto(0)
# create a frame inside the canvas which will be scrolled with it
self.interior = interior = tk.Frame(self.canvas)
interior_id = self.canvas.create_window(0, 0, window=interior,
anchor=tk.NW)
self.interior.update_idletasks()
# track changes to the canvas and frame width and sync them,
# also updating the scrollbar
def _configure_interior(event):
# update the scrollbars to match the size of the inner frame
size = (interior.winfo_reqwidth(), interior.winfo_reqheight())
self.canvas.config(scrollregion="0 0 %s %s" % size)
if interior.winfo_reqwidth() != self.canvas.winfo_width():
# update the canvas's width to fit the inner frame
self.canvas.config(width=interior.winfo_reqwidth())
interior.bind('<Configure>', _configure_interior)
def _configure_canvas(event):
if interior.winfo_reqwidth() != self.canvas.winfo_width():
# update the inner frame's width to fill the canvas
self.canvas.itemconfigure(interior_id, width=self.canvas.winfo_width())
self.canvas.bind('<Configure>', _configure_canvas)
def _on_mousewheel(self, event):
self.canvas.yview_scroll(int(-1*(event.delta/120)), "units")
# ------------------------------- Sound buttons ------------------------------ #
class Make_sound:
def __init__(self, name, parent):
self.varbutton = tk.StringVar()
self.name = name
self.parent = parent
self.soundbuttoncreator()
def launchsound(self):
print(self.varbutton.get())
if self.varbutton.get() == 1:
self.list=[]
else:
self.list.append("A")
def soundbuttoncreator(self):
self.frame = tk.Frame(self.parent) # create a frame to hold the widgets
# use self.frame as parent instead of self.parent
self.volumescale = tk.Scale(self.frame, orient='vertical', from_=100, to=0, resolution=0.5, label='Volume',command=self.setvolume, cursor="fleur")
self.volumescale.grid(row=0,column=1, rowspan=2, sticky="nsew")
self.volumescale.set(100)
self.faderscale = tk.Scale(self.frame, orient='horizontal', from_=-1, to=1, resolution=0.01, label='Balance G/D', command=self.setbalance, cursor="fleur")
self.faderscale.grid(row=1,column=0, sticky="nsew")
self.button = tk.Checkbutton(self.frame, text=self.name, indicatoron=False, selectcolor="green", background="red", variable=self.varbutton, command=self.launchsound, cursor="plus")
self.button.grid(row=0, column=0, sticky="nsew")
self.frame.pack() # use pack() on the frame so new instance of `Make_sound` will not overlap the old instances
def setvolume(self,event):
pass
def setbalance(self,event):
pass
def sounds_buttons(parent):
for i in range(len(wav_files)):
new_name = wav_files[i][:-4]
globals()["wav_files"][i] = Make_sound(new_name,parent)
# ---------------------------------------------------------------------------- #
# Creation #
# ---------------------------------------------------------------------------- #
# ----------------------------- Buttons of sound ----------------------------- #
scframe = VerticalScrolledFrame(root)
scframe.pack(side=tk.LEFT)
sounds_buttons(scframe.interior)
root.mainloop()
EDIT 1:
I have modified the Make_sound class and sounds_buttons function. There is an error.
class Make_sound:
def __init__(self, name, parent, i):
self.varbutton = tk.StringVar()
self.name = name
self.parent = parent
self.num = i
self.soundbuttoncreator()
def launchsound(self):
print(self.varbutton.get())
if self.varbutton.get() == 1:
self.list=[]
else:
self.list.append("A")
def soundbuttoncreator(self):
self.rows = self.num//5
self.columns = self.num%5
self.frame = tk.Frame(self.parent) # create a frame to hold the widgets
# use self.frame as parent instead of self.parent
self.volumescale = tk.Scale(self.frame, orient='vertical', from_=100, to=0, resolution=0.5, label='Volume',command=self.setvolume, cursor="fleur")
self.volumescale.grid(row=0,column=1, rowspan=2, sticky="nsew")
self.volumescale.set(100)
self.faderscale = tk.Scale(self.frame, orient='horizontal', from_=-1, to=1, resolution=0.01, label='Balance G/D', command=self.setbalance, cursor="fleur")
self.faderscale.grid(row=1,column=0, sticky="nsew")
self.button = tk.Checkbutton(self.frame, text=self.name, indicatoron=False, selectcolor="green", background="red", variable=self.varbutton, command=self.launchsound, cursor="plus")
self.button.grid(row=0, column=0, sticky="nsew")
self.frame.grid(row=self.rows, column=self.columns)
def setvolume(self,event):
pass
def setbalance(self,event):
pass
def sounds_buttons(parent):
for i in range(len(wav_files)):
new_name = wav_files[i][:-4]
globals()["wav_files"][i] = Make_sound(new_name,parent,i)
I use Python 2.7 and I have a scrollable frame where the canvas is not shrinking to fit the frame I want to make scrollable.
I looked at this question for an answer but it does not work when I run it:
How to resize a scrollable frame to fill the canvas?
When I print the width of the frame inside the canvas, it says 0.
I also ran the code from the answer of this question on my computer :
Scrollable Frame does not resize properly using tkinter in Python
but it will still show the white canvas to the left of the labels, and it does not resize when the labels are deleted.
It looks like this:
This is my code, based on the answer in this question:
Adding a scrollbar to a group of widgets in Tkinter
from Tkinter import *
class Scrollable_frame(Frame):
def __init__(self, parent, title, values):
self.parent = parent
Frame.__init__(self, self.parent)
self.canvas = Canvas(self, borderwidth=0, background="#ffffff")
self.scrollbar = Scrollbar(self, command=self.canvas.yview)
self.innerFrame = Radiobutton_frame(self.canvas,title,values)
self.canvas.configure(yscrollcommand=self.scrollbar.set)
self.canvas.grid(row=0, column=0, sticky= N+S)
self.scrollbar.grid(row=0, column=1, sticky = N+S)
self.canvas.create_window((0,0),window = self.innerFrame,anchor="nw")
self.innerFrame.bind("<Configure>", self.set_canvas_scrollregion)
self.grid_rowconfigure(0, weight=1)
self.grid_columnconfigure(0, weight=1)
def set_canvas_scrollregion(self, event):
width = event.width - 4
self.canvas.itemconfigure("self.innerFrame ", width=width)
self.canvas.config(scrollregion=self.canvas.bbox("all"))
class Radiobutton_frame(LabelFrame):
def __init__(self, parent, title, values):
"""
In: parent - Canvas
title - String
values - List of Int
"""
self.radiobuttons = {}
self.parent = parent
self.selection = StringVar()
self.selection.set("init")
LabelFrame.__init__(self, self.parent, text = title)
for value in values:
self.add_radiobutton(value)
def add_radiobutton(self, value):
"""
Adds a radiobutton to the frame.
In: item - String
"""
# Associate to same variable to make them function as a group
self.radiobuttons[value] = Radiobutton(master = self,
variable = self.selection,
text = value,
value = value)
self.radiobuttons[value].pack(anchor=W)
# Usage example
root = Tk()
root.grid_rowconfigure(0, weight=1)
root.grid_columnconfigure(0, weight=1)
scrollableFrame = Scrollable_frame(root, "Canvas not resizing", range(30))
scrollableFrame.grid(row=0, column=0, sticky=N+S+E+W)
if __name__ == '__main__':
root.mainloop()
I don't think above question's code snippet fits to a Minimal, Complete, and Verifiable example but at the very least it's runnable.
You have three mistakes compared to that of: How to resize a scrollable frame to fill the canvas?
The most significant of which is that in the linked question, the OP uses the option tags where you don't. Replace:
self.canvas.create_window((0,0),window = self.innerFrame,anchor="nw")
with:
self.canvas.create_window((0,0),window = self.innerFrame, anchor="nw", tags="my_tag")
Another mistake is that you're binding the event of a frame's resizing as opposed to the actual Canvas' resizing, also pointed out in Bryan's comment here. Replace:
self.innerFrame.bind("<Configure>", self.set_canvas_scrollregion)
with:
self.canvas.bind("<Configure>", self.set_canvas_scrollregion)
Lastly, tkinter doesn't seem to accept space character with tags, replace:
self.canvas.itemconfigure("self.innerFrame ", width=width)
with:
self.canvas.itemconfigure("my_tag", width=width)
Finally, you should have:
from Tkinter import *
class Scrollable_frame(Frame):
def __init__(self, parent, title, values):
self.parent = parent
Frame.__init__(self, self.parent)
self.canvas = Canvas(self, borderwidth=0, background="#ffffff")
self.scrollbar = Scrollbar(self, command=self.canvas.yview)
self.innerFrame = Radiobutton_frame(self.canvas,title,values)
self.canvas.configure(yscrollcommand=self.scrollbar.set)
self.canvas.grid(row=0, column=0, sticky= N+S)
self.scrollbar.grid(row=0, column=1, sticky = N+S)
self.canvas.create_window((0,0),window = self.innerFrame,anchor="nw",
tags="my_tag")
self.canvas.bind("<Configure>", self.set_canvas_scrollregion)
self.grid_rowconfigure(0, weight=1)
self.grid_columnconfigure(0, weight=1)
def set_canvas_scrollregion(self, event):
width = event.width - 4
self.canvas.itemconfigure("my_tag", width=width)
self.canvas.config(scrollregion=self.canvas.bbox("all"))
class Radiobutton_frame(LabelFrame):
def __init__(self, parent, title, values):
"""
In: parent - Canvas
title - String
values - List of Int
"""
self.radiobuttons = {}
self.parent = parent
self.selection = StringVar()
self.selection.set("init")
LabelFrame.__init__(self, self.parent, text = title)
for value in values:
self.add_radiobutton(value)
def add_radiobutton(self, value):
"""
Adds a radiobutton to the frame.
In: item - String
"""
# Associate to same variable to make them function as a group
self.radiobuttons[value] = Radiobutton(master = self,
variable = self.selection,
text = value,
value = value)
self.radiobuttons[value].pack(anchor=W)
# Usage example
root = Tk()
root.grid_rowconfigure(0, weight=1)
root.grid_columnconfigure(0, weight=1)
scrollableFrame = Scrollable_frame(root, "Canvas not resizing", range(30))
scrollableFrame.grid(row=0, column=0, sticky=N+S+E+W)
if __name__ == '__main__':
root.mainloop()
My objective is to add a vertical scroll bar to a frame which has several labels in it. The scroll bar should automatically enabled as soon as the labels inside the frame exceed the height of the frame. After searching through, I found this useful post. Based on that post I understand that in order to achieve what i want, (correct me if I am wrong, I am a beginner) I have to create a Frame first, then create a Canvas inside that frame and stick the scroll bar to that frame as well. After that, create another frame and put it inside the canvas as a window object. So, I finally come up with this:
from Tkinter import *
def data():
for i in range(50):
Label(frame,text=i).grid(row=i,column=0)
Label(frame,text="my text"+str(i)).grid(row=i,column=1)
Label(frame,text="..........").grid(row=i,column=2)
def myfunction(event):
canvas.configure(scrollregion=canvas.bbox("all"),width=200,height=200)
root=Tk()
sizex = 800
sizey = 600
posx = 100
posy = 100
root.wm_geometry("%dx%d+%d+%d" % (sizex, sizey, posx, posy))
myframe=Frame(root,relief=GROOVE,width=50,height=100,bd=1)
myframe.place(x=10,y=10)
canvas=Canvas(myframe)
frame=Frame(canvas)
myscrollbar=Scrollbar(myframe,orient="vertical",command=canvas.yview)
canvas.configure(yscrollcommand=myscrollbar.set)
myscrollbar.pack(side="right",fill="y")
canvas.pack(side="left")
canvas.create_window((0,0),window=frame,anchor='nw')
frame.bind("<Configure>",myfunction)
data()
root.mainloop()
Am I doing it right? Is there better/smarter way to achieve the output this code gave me?
Why must I use grid method? (I tried place method, but none of the labels appear on the canvas.)
What so special about using anchor='nw' when creating window on canvas?
Please keep your answer simple, as I am a beginner.
Here's example code adapted from the VerticalScrolledFrame page on the now defunct Tkinter Wiki that's been modified to run on Python 2.7 and 3+.
try: # Python 2
import tkinter as tk
import tkinter.ttk as ttk
from tkinter.constants import *
except ImportError: # Python 2
import Tkinter as tk
import ttk
from tkinter.constants import *
# Based on
# https://web.archive.org/web/20170514022131id_/http://tkinter.unpythonic.net/wiki/VerticalScrolledFrame
class VerticalScrolledFrame(ttk.Frame):
"""A pure Tkinter scrollable frame that actually works!
* Use the 'interior' attribute to place widgets inside the scrollable frame.
* Construct and pack/place/grid normally.
* This frame only allows vertical scrolling.
"""
def __init__(self, parent, *args, **kw):
ttk.Frame.__init__(self, parent, *args, **kw)
# Create a canvas object and a vertical scrollbar for scrolling it.
vscrollbar = ttk.Scrollbar(self, orient=VERTICAL)
vscrollbar.pack(fill=Y, side=RIGHT, expand=FALSE)
canvas = tk.Canvas(self, bd=0, highlightthickness=0,
yscrollcommand=vscrollbar.set)
canvas.pack(side=LEFT, fill=BOTH, expand=TRUE)
vscrollbar.config(command=canvas.yview)
# Reset the view
canvas.xview_moveto(0)
canvas.yview_moveto(0)
# Create a frame inside the canvas which will be scrolled with it.
self.interior = interior = ttk.Frame(canvas)
interior_id = canvas.create_window(0, 0, window=interior,
anchor=NW)
# Track changes to the canvas and frame width and sync them,
# also updating the scrollbar.
def _configure_interior(event):
# Update the scrollbars to match the size of the inner frame.
size = (interior.winfo_reqwidth(), interior.winfo_reqheight())
canvas.config(scrollregion="0 0 %s %s" % size)
if interior.winfo_reqwidth() != canvas.winfo_width():
# Update the canvas's width to fit the inner frame.
canvas.config(width=interior.winfo_reqwidth())
interior.bind('<Configure>', _configure_interior)
def _configure_canvas(event):
if interior.winfo_reqwidth() != canvas.winfo_width():
# Update the inner frame's width to fill the canvas.
canvas.itemconfigure(interior_id, width=canvas.winfo_width())
canvas.bind('<Configure>', _configure_canvas)
if __name__ == "__main__":
class SampleApp(tk.Tk):
def __init__(self, *args, **kwargs):
root = tk.Tk.__init__(self, *args, **kwargs)
self.frame = VerticalScrolledFrame(root)
self.frame.pack()
self.label = ttk.Label(self, text="Shrink the window to activate the scrollbar.")
self.label.pack()
buttons = []
for i in range(10):
buttons.append(ttk.Button(self.frame.interior, text="Button " + str(i)))
buttons[-1].pack()
app = SampleApp()
app.mainloop()
It does not yet have the mouse wheel bound to the scrollbar but it is possible. Scrolling with the wheel can get a bit bumpy, though.
edit:
to 1)
IMHO scrolling frames is somewhat tricky in Tkinter and does not seem to be done a lot. It seems there is no elegant way to do it.
One problem with your code is that you have to set the canvas size manually - that's what the example code I posted solves.
to 2)
You are talking about the data function? Place works for me, too. (In general I prefer grid).
to 3)
Well, it positions the window on the canvas.
One thing I noticed is that your example handles mouse wheel scrolling by default while the one I posted does not. Will have to look at that some time.
"Am i doing it right?Is there better/smarter way to achieve the output this code gave me?"
Generally speaking, yes, you're doing it right. Tkinter has no native scrollable container other than the canvas. As you can see, it's really not that difficult to set up. As your example shows, it only takes 5 or 6 lines of code to make it work -- depending on how you count lines.
"Why must i use grid method?(i tried place method, but none of the labels appear on the canvas?)"
You ask about why you must use grid. There is no requirement to use grid. Place, grid and pack can all be used. It's simply that some are more naturally suited to particular types of problems. In this case it looks like you're creating an actual grid -- rows and columns of labels -- so grid is the natural choice.
"What so special about using anchor='nw' when creating window on canvas?"
The anchor tells you what part of the window is positioned at the coordinates you give. By default, the center of the window will be placed at the coordinate. In the case of your code above, you want the upper left ("northwest") corner to be at the coordinate.
Please see my class that is a scrollable frame. It's vertical scrollbar is binded to <Mousewheel> event as well. So, all you have to do is to create a frame, fill it with widgets the way you like, and then make this frame a child of my ScrolledWindow.scrollwindow. Feel free to ask if something is unclear.
Used a lot from # Brayan Oakley answers to close to this questions
class ScrolledWindow(tk.Frame):
"""
1. Master widget gets scrollbars and a canvas. Scrollbars are connected
to canvas scrollregion.
2. self.scrollwindow is created and inserted into canvas
Usage Guideline:
Assign any widgets as children of <ScrolledWindow instance>.scrollwindow
to get them inserted into canvas
__init__(self, parent, canv_w = 400, canv_h = 400, *args, **kwargs)
docstring:
Parent = master of scrolled window
canv_w - width of canvas
canv_h - height of canvas
"""
def __init__(self, parent, canv_w = 400, canv_h = 400, *args, **kwargs):
"""Parent = master of scrolled window
canv_w - width of canvas
canv_h - height of canvas
"""
super().__init__(parent, *args, **kwargs)
self.parent = parent
# creating a scrollbars
self.xscrlbr = ttk.Scrollbar(self.parent, orient = 'horizontal')
self.xscrlbr.grid(column = 0, row = 1, sticky = 'ew', columnspan = 2)
self.yscrlbr = ttk.Scrollbar(self.parent)
self.yscrlbr.grid(column = 1, row = 0, sticky = 'ns')
# creating a canvas
self.canv = tk.Canvas(self.parent)
self.canv.config(relief = 'flat',
width = 10,
heigh = 10, bd = 2)
# placing a canvas into frame
self.canv.grid(column = 0, row = 0, sticky = 'nsew')
# accociating scrollbar comands to canvas scroling
self.xscrlbr.config(command = self.canv.xview)
self.yscrlbr.config(command = self.canv.yview)
# creating a frame to inserto to canvas
self.scrollwindow = ttk.Frame(self.parent)
self.canv.create_window(0, 0, window = self.scrollwindow, anchor = 'nw')
self.canv.config(xscrollcommand = self.xscrlbr.set,
yscrollcommand = self.yscrlbr.set,
scrollregion = (0, 0, 100, 100))
self.yscrlbr.lift(self.scrollwindow)
self.xscrlbr.lift(self.scrollwindow)
self.scrollwindow.bind('<Configure>', self._configure_window)
self.scrollwindow.bind('<Enter>', self._bound_to_mousewheel)
self.scrollwindow.bind('<Leave>', self._unbound_to_mousewheel)
return
def _bound_to_mousewheel(self, event):
self.canv.bind_all("<MouseWheel>", self._on_mousewheel)
def _unbound_to_mousewheel(self, event):
self.canv.unbind_all("<MouseWheel>")
def _on_mousewheel(self, event):
self.canv.yview_scroll(int(-1*(event.delta/120)), "units")
def _configure_window(self, event):
# update the scrollbars to match the size of the inner frame
size = (self.scrollwindow.winfo_reqwidth(), self.scrollwindow.winfo_reqheight())
self.canv.config(scrollregion='0 0 %s %s' % size)
if self.scrollwindow.winfo_reqwidth() != self.canv.winfo_width():
# update the canvas's width to fit the inner frame
self.canv.config(width = self.scrollwindow.winfo_reqwidth())
if self.scrollwindow.winfo_reqheight() != self.canv.winfo_height():
# update the canvas's width to fit the inner frame
self.canv.config(height = self.scrollwindow.winfo_reqheight())
For anyone who stumbles across this (as it did when looking for my own gist) I maintain a gist for exactly this purpose at https://gist.github.com/mp035/9f2027c3ef9172264532fcd6262f3b01 It has scrollwheel support for various operating systems, is commented, and has a built-in demo in the file.
We can add scroll bar even without using Canvas. I have read it in many other post we can't add vertical scroll bar in frame directly etc etc. But after doing many experiment found out way to add vertical as well as horizontal scroll bar :). Please find below code which is used to create scroll bar in treeView and frame.
f = Tkinter.Frame(self.master,width=3)
f.grid(row=2, column=0, columnspan=8, rowspan=10, pady=30, padx=30)
f.config(width=5)
self.tree = ttk.Treeview(f, selectmode="extended")
scbHDirSel =tk.Scrollbar(f, orient=Tkinter.HORIZONTAL, command=self.tree.xview)
scbVDirSel =tk.Scrollbar(f, orient=Tkinter.VERTICAL, command=self.tree.yview)
self.tree.configure(yscrollcommand=scbVDirSel.set, xscrollcommand=scbHDirSel.set)
self.tree["columns"] = (self.columnListOutput)
self.tree.column("#0", width=40)
self.tree.heading("#0", text='SrNo', anchor='w')
self.tree.grid(row=2, column=0, sticky=Tkinter.NSEW,in_=f, columnspan=10, rowspan=10)
scbVDirSel.grid(row=2, column=10, rowspan=10, sticky=Tkinter.NS, in_=f)
scbHDirSel.grid(row=14, column=0, rowspan=2, sticky=Tkinter.EW,in_=f)
f.rowconfigure(0, weight=1)
f.columnconfigure(0, weight=1)
It is nessesery to configure Scrollbar in case of using with Canvas
by sending to Canvas xscrollcommand attribute Scrollbar.set method and
to Scrollbar command attribute Canvas.yview (xview) method.
Canvas.yview method after scrollbar was moved recieve *args in next formatting:
tuple('move_to', '<some_absolute_float_value_of_top_of_scrollbar_region>')
In case of implementing scrollability to widget,
Recieving region and translating scrollbar_region (whith element viewable and whith not) features must be created.
Region is `tuple(float, float)' representing open to see part of all elements.
Not ideal bechavior showed in this solution (without using tk.Canvas)
import tkinter as tk
from tkinter import ttk
class ItemizeFrame(ttk.Frame, list):
def __init__(self,
*args,
scroll_upd_callback = lambda x: x,
visible_els: int = 10,
**kwargs):
list.__init__(self)
ttk.Frame.__init__(self, *args, **kwargs)
ttk.Style().configure('Small.TButton', background='red', width=2, height=2, padx=3, pady=3)
ttk.Style().configure('Sep.TFrame', padx=3, pady=3)
self.scroll_upd_callback = scroll_upd_callback
self.visible_els = visible_els
self.visible_st_idx = 0
self.pseudo_scroll_element_cursor_line = 0.5*1/visible_els
def append(self, item: ttk.Widget, **kw):
e = item(self, **kw)
super().append(e)
e.pack(fill='x')
self._update_visible_els()
def _update_visable_id_callback(self):
for id_, entry_ in enumerate(self):
entry_.set_id(id_)
def pop(self, index=None):
e = super().pop(index)
e.destroy()
self._update_visible_els()
def __getitem__(self, idx) -> ttk.Widget:
return list.__getitem__(self, idx)
# indicators computing and application
#property
def visible_end_idx(self):
return self.visible_st_idx + self.visible_els -1
#property
def visible_area_ratio(self) -> tuple[float, float]:
total = len(self)
st_val = 0.0
end_val = 1.0
if total > self.visible_els:
end_val = 1.0 - (total-self.visible_end_idx)/total
st_val = self.visible_st_idx / total
st_val = st_val + self.pseudo_scroll_element_cursor_line
end_val = end_val + self.pseudo_scroll_element_cursor_line
return (st_val, end_val)
def _update_scroll_widget(self):
self.scroll_upd_callback(*self.visible_area_ratio)
def set_yview(self, move_to_ratio):
base_pseudo_ratio = 0.5*1/self.visible_els
total = len(self)
max_ratio = (total - self.visible_els)/total+base_pseudo_ratio
if move_to_ratio < 0:
possible_st_el_pseudo_part = base_pseudo_ratio
possible_st_el_idx = 0
if max_ratio < move_to_ratio:
possible_st_el_idx = total - self.visible_els
possible_st_el_pseudo_part = base_pseudo_ratio
else :
el_idx_raw = move_to_ratio * total
el_idx_round = round(el_idx_raw)
el_idx_pseudo = (el_idx_raw - el_idx_round)*1/self.visible_els
possible_st_el_idx = el_idx_round
possible_st_el_pseudo_part = el_idx_pseudo
self.visible_st_idx = possible_st_el_idx
self.pseudo_scroll_element_cursor_line = possible_st_el_pseudo_part
self._update_visible_els()
def _update_visible_els(self):
for el in self:
el.pack_forget()
for num, el in enumerate(self):
if self.visible_st_idx <= num and num <= self.visible_end_idx:
el.pack()
self._update_scroll_widget()
class ScrollableFrame(ttk.Frame):
def __init__(self, *args, **kwargs):
kw = dict(width=400, height=300)
kw.update(kwargs)
super().__init__(*args, **kw)
self.scroll = ttk.Scrollbar(self, command=self.on_scroll)
self.scroll.pack(expand=True, fill='y', side='right')
self.view = ItemizeFrame(
self,
scroll_upd_callback=self.scroll.set,
**kwargs
)
self.view.pack(expand=True, fill='both')#, side='left')
def on_scroll(self, *args, **kwargs):
value_raw = float(args[1])
self.view.set_yview(value_raw)
Usecase
class App(tk.Tk):
def __init__(self):
super().__init__()
self.frame = ScrollableFrame(self)
self.frame.pack()
def test_fill(self):
for i in range(15):
self.frame.view.append(ttk.Entry)
class Test:
#staticmethod
def v2():
app = App()
app.test_fill()
app.mainloop()
Test.v2()
After I watching many answers, I got it:
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
'''When window size change, canvas size will change,
use this line to change its item size (width).'''
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw") #canvas size is relative to window size.
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
# When the window size change, it will call this function
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
Specifies the size of the scrollable frame by changing canvas and scrollbar position and size.
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.place(relx=0.9, y=0, relwidth=0.1, relheight=0.5)
canvas.place(x=0, y=0, relwidth=0.9, relheight=0.5)
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
Specifies the size of the scrollable frame by writing them to outerFrame.
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
outerFrame = tk.Frame(root)
canvas = tk.Canvas(outerFrame, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(outerFrame, orient="vertical", command=canvas.yview)
canvas.config(yscrollcommand=vsb.set)
outerFrame.place(relx=0.25, rely=0.1, relwidth=0.5, relheight=0.5)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
The items inner the frame can use pack or grid (only choose one), but place cannot be used alone. If you want to use place, you need to expand the layout(height) with pack or grid first.
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
L1 = tk.Label(frame, text="我是Label")
L1.place(x=0, rely=0.5)
root.mainloop()
Use mouse wheel:
tkinter: binding mousewheel to scrollbar
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
def onFrameConfigure(canvas):
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(wrapFrame, width=canvas.winfo_width())
def on_mouse_wheel(event, scale=3):
#only care event.delta is - or +, scroll down or up
if event.delta<0:
canvas.yview_scroll(scale, "units")
else:
canvas.yview_scroll(-scale, "units")
canvas = tk.Canvas(root, highlightthickness=0)
frame = tk.Frame(canvas, background="#FFFFFF")
vsb = tk.Scrollbar(root, orient="vertical", command=canvas.yview)
canvas.configure(yscrollcommand=vsb.set)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
wrapFrame = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.bind("<Configure>", lambda event, canvas=canvas: onFrameConfigure(canvas))
canvas.bind("<Enter>", lambda event: canvas.bind_all("<MouseWheel>", on_mouse_wheel)) # on mouse enter
canvas.bind("<Leave>", lambda event: canvas.unbind_all("<MouseWheel>")) # on mouse leave
L1 = tk.Label(frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame)
input.pack()
root.mainloop()
Export to class:
import tkinter as tk
root = tk.Tk()
root.title("音樂編輯器")
root.geometry("600x480")
class scrollFrame():
def __init__(self, **options):
outerFrame = tk.Frame(root)
canvas = tk.Canvas(outerFrame, highlightthickness=0)
vsb = tk.Scrollbar(outerFrame, orient="vertical", command=canvas.yview)
vsb.pack(side="right", fill="y")
canvas.pack(fill="both", expand=1, anchor="nw")
frame = tk.Frame(canvas, **options)
wrapFrameId = canvas.create_window((0,0), window=frame, anchor="nw")
canvas.config(yscrollcommand=vsb.set)
canvas.bind("<Configure>", lambda event: self.onFrameConfigure())
canvas.bind("<Enter>", lambda event: canvas.bind_all("<MouseWheel>", self.on_mouse_wheel)) # on mouse enter
canvas.bind("<Leave>", lambda event: canvas.unbind_all("<MouseWheel>")) # on mouse leave
self.outerFrame, self.canvas, self.vsb, self.frame, self.wrapFrameId = outerFrame, canvas, vsb, frame, wrapFrameId
def onFrameConfigure(self):
canvas = self.canvas
'''Reset the scroll region to encompass the inner frame'''
canvas.configure(scrollregion=canvas.bbox("all"))
canvas.itemconfigure(self.wrapFrameId, width=canvas.winfo_width())
def on_mouse_wheel(self, event, scale=3):
canvas = self.canvas
#only care event.delta is - or +, scroll down or up
if event.delta<0:
canvas.yview_scroll(scale, "units")
else:
canvas.yview_scroll(-scale, "units")
frame = scrollFrame(background="#FFFFFF")
frame.outerFrame.place(relx=0.15, rely=0.1, relwidth=0.7, relheight=0.8)
L1 = tk.Label(frame.frame, text="音樂編輯器", bg="#556644", font=("",25))
L1.pack(anchor="n")
for i in range(100):
input = tk.Entry(frame.frame)
input.pack()
root.mainloop()
According:
https://stackoverflow.com/a/3092341/19470749
https://stackoverflow.com/a/16198198/19470749
https://anzeljg.github.io/rin2/book2/2405/docs/tkinter/create_window.html
Not 100% sure if this solution is on topic (since it explicitely asks for a scrollable FRAME), but the text widget is basically a scrollable Frame.
From documentation of the Text widget:
"Like canvas widgets, text widgets can contain images and any other Tk widgets (including frames containing many other widgets). In a sense, this allows the text widget to work as a geometry manager in its own right. "
Text widgets are very easy to use, and can be made scrollable. So instead of using a special Class like the Scrollable Frame, I think the Text widget is a great option.
Below my code, for a basic example of a scrollable text widget holding 100 buttons:
from tkinter import Tk, Button, Text,Scrollbar
class test:
def __init__(self):
self.win = Tk()
text = Text(self.win, width=40, height=10, wrap = "none")
ys = Scrollbar(self.win, orient = 'vertical', command = text.yview)
text['yscrollcommand'] = ys.set
text.grid(column = 0, row = 0, sticky = 'nwes')
ys.grid(column = 1, row = 0, sticky = 'ns')
for x in range(1,100):
b = Button(text, text='Push Me')
text.window_create("end", window=b)
text.insert("end",'\n')
self.win.mainloop()
test = test()
This is at least the method I am going to use for my scrollable frames. Not sure if there is a better solution then the newline insertion to make the widgets organised vertically. But it works.