Related
What does the return statement do? How should it be used in Python?
How does return differ from print?
See also
Often, people try to use print in a loop inside a function in order to see multiple values, and want to be able to use the results from outside. They need to be returned, but return exits the function the first time. See How can I use `return` to get back multiple values from a loop? Can I put them in a list?.
Often, beginners will write a function that ultimately prints something rather than returning it, and then also try to print the result, resulting in an unexpected None. See Why is "None" printed after my function's output?.
Occasionally in 3.x, people try to assign the result of print to a name, or use it in another expression, like input(print('prompt:')). In 3.x, print is a function, so this is not a syntax error, but it returns None rather than what was displayed. See Why does the print function return None?.
Occasionally, people write code that tries to print the result from a recursive call, rather than returning it properly. Just as if the function were merely called, this does not work to propagate the value back through the recursion. See Why does my recursive function return None?.
Consider How do I get a result (output) from a function? How can I use the result later? for questions that are simply about how to use return, without considering print.
The print() function writes, i.e., "prints", a string in the console. The return statement causes your function to exit and hand back a value to its caller. The point of functions in general is to take in inputs and return something. The return statement is used when a function is ready to return a value to its caller.
For example, here's a function utilizing both print() and return:
def foo():
print("hello from inside of foo")
return 1
Now you can run code that calls foo, like so:
if __name__ == '__main__':
print("going to call foo")
x = foo()
print("called foo")
print("foo returned " + str(x))
If you run this as a script (e.g. a .py file) as opposed to in the Python interpreter, you will get the following output:
going to call foo
hello from inside foo
called foo
foo returned 1
I hope this makes it clearer. The interpreter writes return values to the console so I can see why somebody could be confused.
Here's another example from the interpreter that demonstrates that:
>>> def foo():
... print("hello within foo")
... return 1
...
>>> foo()
hello within foo
1
>>> def bar():
... return 10 * foo()
...
>>> bar()
hello within foo
10
You can see that when foo() is called from bar(), 1 isn't written to the console. Instead it is used to calculate the value returned from bar().
print() is a function that causes a side effect (it writes a string in the console), but execution resumes with the next statement. return causes the function to stop executing and hand a value back to whatever called it.
Think of the print statement as causing a side-effect, it makes your function write some text out to the user, but it can't be used by another function.
I'll attempt to explain this better with some examples, and a couple definitions from Wikipedia.
Here is the definition of a function from Wikipedia
A function, in mathematics, associates one quantity, the argument of the function, also known as the input, with another quantity, the value of the function, also known as the output..
Think about that for a second. What does it mean when you say the function has a value?
What it means is that you can actually substitute the value of a function with a normal value! (Assuming the two values are the same type of value)
Why would you want that you ask?
What about other functions that may accept the same type of value as an input?
def square(n):
return n * n
def add_one(n):
return n + 1
print square(12)
# square(12) is the same as writing 144
print add_one(square(12))
print add_one(144)
#These both have the same output
There is a fancy mathematical term for functions that only depend on their inputs to produce their outputs: Referential Transparency. Again, a definition from Wikipedia.
Referential transparency and referential opaqueness are properties of parts of computer programs. An expression is said to be referentially transparent if it can be replaced with its value without changing the behavior of a program
It might be a bit hard to grasp what this means if you're just new to programming, but I think you will get it after some experimentation.
In general though, you can do things like print in a function, and you can also have a return statement at the end.
Just remember that when you use return you are basically saying "A call to this function is the same as writing the value that gets returned"
Python will actually insert a return value for you if you decline to put in your own, it's called "None", and it's a special type that simply means nothing, or null.
I think the dictionary is your best reference here
Return and Print
In short:
return gives something back or replies to the caller of the function while print produces text
In python, we start defining a function with def, and generally - but not necessarily - end the function with return.
Suppose we want a function that adds 2 to the input value x. In mathematics, we might write something like f(x) = x + 2, describing that relationship: the value of the function, evaluated at x, is equal to x + 2.
In Python, it looks like this instead:
def f(x):
return x + 2
That is: we define a function named f, which will be given an x value. When the code runs we figure out x + 2, and return that value. Instead of describing a relationship, we lay out steps that must be taken to calculate the result.
After defining the function, it can be called with whatever argument you like. It doesn't have to be named x in the calling code, and it doesn't even have to be a variable:
print f(2)
>>> 4
We could write the code for the function in some other ways. For example:
def f(x):
y = x + 2
return y
or even
def f(x):
x = x + 2
return x
Again, we are following steps in order - x = x + 2 changes what x refers to (now it means the result from the sum), and that is what gets returned by return x (because that's the value *at the time that the return happens).
return means "output this value from this function".
print means "send this value to (generally) stdout"
In the Python REPL, a function's return value will be output to the screen by default (this isn't the same as printing it). This output only happens at the REPL, not when running code from a .py file. It is the same as the output from any other expression at the REPL.
This is an example of print:
>>> n = "foo\nbar" #just assigning a variable. No output
>>> n #the value is output, but it is in a "raw form"
'foo\nbar'
>>> print(n) #the \n is now a newline
foo
bar
>>>
This is an example of return:
>>> def getN():
... return "foo\nbar"
...
>>> getN() #When this isn't assigned to something, it is just output
'foo\nbar'
>>> n = getN() # assigning a variable to the return value. No output
>>> n #the value is output, but it is in a "raw form"
'foo\nbar'
>>> print(n) #the \n is now a newline
foo
bar
>>>
This answer goes over some of the cases that have not been discussed above.
The return statement allows you to terminate the execution of a function before you reach the end. This causes the flow of execution to immediately return to the caller.
In line number 4:
def ret(n):
if n > 9:
temp = "two digits"
return temp #Line 4
else:
temp = "one digit"
return temp #Line 8
print("return statement")
ret(10)
After the conditional statement gets executed the ret() function gets terminated due to return temp (line 4).
Thus the print("return statement") does not get executed.
Output:
two digits
This code that appears after the conditional statements, or the place the flow of control cannot reach, is the dead code.
Returning Values
In lines number 4 and 8, the return statement is being used to return the value of a temporary variable after the condition has been executed.
To bring out the difference between print and return:
def ret(n):
if n > 9:
print("two digits")
return "two digits"
else :
print("one digit")
return "one digit"
ret(25)
Output:
two digits
'two digits'
Note that return can also be used for control flow. By putting one or more return statements in the middle of a function, we can say: "stop executing this function. We've either got what we wanted or something's gone wrong!"
For example, imagine trying to implement str.find(sub) if we only had str.index(sub) available (index raises a ValueError if the substring isn't found, whereas find returns -1).
We could use a try/except block:
def find(s: str, sub: str) -> int:
try:
return s.index(sub)
except ValueError:
return -1
This is fine, and it works, but it's not very expressive. It's not immediately clear what would cause str.index to raise a ValueError: a reader of this code must understand the workings of str.index in order to understand the logic of find.
Rather than add a doc-string, saying "...unless sub isn't found, in which case return -1", we could make the code document itself, like this:
def find(s: str, sub: str) -> int:
if sub not in s:
return -1
return s.index(sub)
This makes the logic very clear.
The other nice thing about this is that once we get to return s.index(sub) we don't need to wrap it in a try/except because we already know that the substring is present!
See the Code Style section of the Python Guide for more advice on this way of using return.
To put it as simply as possible:
return makes the value (a variable, often) available for use by the caller (for example, to be stored by a function that the function using return is within). Without return, your value or variable wouldn't be available for the caller to store/re-use.
print, by contrast, prints to the screen - but does not make the value or variable available for use by the caller.
Difference between "return" and "print" can also be found in the following example:
RETURN:
def bigger(a, b):
if a > b:
return a
elif a <b:
return b
else:
return a
The above code will give correct results for all inputs.
PRINT:
def bigger(a, b):
if a > b:
print a
elif a <b:
print b
else:
print a
NOTE: This will fail for many test cases.
ERROR:
----
FAILURE: Test case input: 3, 8.
Expected result: 8
FAILURE: Test case input: 4, 3.
Expected result: 4
FAILURE: Test case input: 3, 3.
Expected result: 3
You passed 0 out of 3 test cases
Here is my understanding. (hope it will help someone and it's correct).
def count_number_of(x):
count = 0
for item in x:
if item == "what_you_look_for":
count = count + 1
return count
So this simple piece of code counts number of occurrences of something. The placement of return is significant. It tells your program where do you need the value. So when you print, you send output to the screen. When you return you tell the value to go somewhere. In this case you can see that count = 0 is indented with return - we want the value (count + 1) to replace 0.
If you try to follow logic of the code when you indent the return command further the output will always be 1, because we would never tell the initial count to change.
I hope I got it right.
Oh, and return is always inside a function.
return should be used for recursive functions/methods or you want to use the returned value for later applications in your algorithm.
print should be used when you want to display a meaningful and desired output to the user and you don't want to clutter the screen with intermediate results that the user is not interested in, although they are helpful for debugging your code.
The following code shows how to use return and print properly:
def fact(x):
if x < 2:
return 1
return x * fact(x - 1)
print(fact(5))
This explanation is true for all of the programming languages not just python.
return is part of a function definition, while print outputs text to the standard output (usually the console).
A function is a procedure accepting parameters and returning a value. return is for the latter, while the former is done with def.
Example:
def timestwo(x):
return x*2
Best thing about return function is you can return a value from function but you can do same with print so whats the difference ?
Basically return not about just returning it gives output in object form so that we can save that return value from function to any variable but we can't do with print because its same like stdout/cout in C Programming.
Follow below code for better understanding
CODE
def add(a, b):
print "ADDING %d + %d" % (a, b)
return a + b
def subtract(a, b):
print "SUBTRACTING %d - %d" % (a, b)
return a - b
def multiply(a, b):
print "MULTIPLYING %d * %d" % (a, b)
return a * b
def divide(a, b):
print "DIVIDING %d / %d" % (a, b)
return a / b
print "Let's do some math with just functions!"
age = add(30, 5)
height = subtract(78, 4)
weight = multiply(90, 2)
iq = divide(100, 2)
print "Age: %d, Height: %d, Weight: %d, IQ: %d" % (age, height, weight, iq)
# A puzzle for the extra credit, type it in anyway.
print "Here is a puzzle."
what = add(age, subtract(height, multiply(weight, divide(iq, 2))))
print "That becomes: ", what, "Can you do it by hand?"
We are now doing our own math functions for add, subtract, multiply, and divide. The important thing to notice is the last line where we say return a + b (in add). What this does is the following:
Our function is called with two arguments: a and b.
We print out what our function is doing, in this case "ADDING."
Then we tell Python to do something kind of backward: we return the addition of a + b. You might say this as, "I add a and b then return them."
Python adds the two numbers. Then when the function ends, any line that runs it will be able to assign this a + b result to a variable.
The simple truth is that print and return have nothing to do with each other. print is used to display things in the terminal (for command-line programs).1 return is used to get a result back when you call a function, so that you can use it in the next step of the program's logic.
Many beginners are confused when they try out code at Python's interpreter prompt2, like
>>> def example():
... return 1
...
>>> example()
1
The value was displayed; doesn't this mean that return displays things? No. If you try the same code in a .py file, you can see for yourself that running the script doesn't cause the 1 to display.
This shouldn't actually be confusing, because it works the same way as any other expression:
>>> 1 + 1
2
This displays at the interactive prompt, but not if we make a script that just says 1 + 1 and try running it.
Again: if you need something to display as part of your script, print it. If you need to use it in the next step of the calculation, return it.
The secret is that the interactive prompt is causing the result to be displayed, not the code. It's a separate step that the prompt does for you, so that you can see how the code works a step at a time, for testing purposes.
Now, let's see what happens with print:
>>> def example():
... return 'test'
...
>>> print(example())
test
The result will display, whether we have this in an interactive prompt or in a script. print is explicitly used to display the value - and as we can see, it displays differently. The interactive prompt uses what is called the repr of the value that was returned from example, while print uses the str of the value.
In practical terms: print shows us what the value looks like, in text form (for a string, that just means the contents of the string as-is). The interactive prompt shows us what the value is - typically, by writing something that looks like the source code we would use to create it.3
But wait - print is a function, right? (In 3.x, anyway). So it returned a value, right? Isn't the interpreter prompt supposed to display that in its separate step? What happened?
There is one more trick: print returns the special value None, which the interpreter prompt will ignore. We can test this by using some expressions that evaluate to None:
>>> None
>>> [None][0]
>>> def example():
... pass # see footnote 4
...
>>> example()
>>>
In each case, there is no separate line at all for output, not even a blank line - the interpreter prompt just goes back to the prompt.
1 It can also be used to write into files, although this is a less common idea and normally it will be clearer to use the .write method.
2 This is sometimes called the REPL, which stands for "read-eval-print loop".
3 This isn't always practical, or even possible - especially once we start defining our own classes. The firm rule is that repr will lean on the .__repr__ method of the object to do the dirty work; similarly, str leans on .__str__.
4 Functions in Python implicitly return None if they don't explicitly return a value.
Return statement -- will return some values according your function.
def example(n):
if n == 5:
return true
else:
return false
if you call above function and you pass number 5 then it will return true else it will return false.
Printing function -- it will print content that you have given to the print function or with in print function bracket.
def example(n):
if n == 5:
print("number is equal")
else:
print("number is not equal")
In Python, does a function just execute it’s code block & not store it unless we use a return statement?
When we print variables & expressions I understand we are printing values.
So I am thinking that a function performs it’s code block & then does not save that result unless we return it? Is this what’s happening in the computer?
Example 1
def add(a,b):
nums = a + b
print(add(2,4)+2)
Error
But when we use the return value statement it works
Example 2
def add(a,b):
nums = a + b
return nums
print(add(2,4) + 2)
Output: 8
The error was caused in the first example because the function just executed it’s code block & did not save the result therefore resulting in an error due to not being able to add None to an integer(2)?
&
It worked in example 2 because we saved the functions result with the return statement giving us an integer; Therefore allowing the print statement to print the result of the functions integer + the integer we added it to in the expression?
In python, functions are blocks of code that execute some logic of some sort (sometimes based on arguments passed into them and sometimes not). They are very broad and can do many different kinds of things depending on how they are constructed. I'm not exactly sure what you mean by "store the results" but hopefully some of the following explanation will help.
All variables created in a function are stored with the "local" scope, meaning that they are only existent when the function is running and are deleted the moment the function terminates. For example, in the following code, you cannot access the variable x after the function terminates:
def example():
x = 'Hello World'
print(x) #This prints: Hello World
example()
print(x) #This will give you a Reference error
If that is what you mean by "stores the results" then you are right: those results will not be stored. You can, however, declare a variable inside of a function to be a global variable, meaning that it can be accessed outside of the function too:
def example():
global x = 'Hello World'
print(x) #This prints: Hello World
example()
print(x) #This prints: Hello World
When you use the return statement in a function you are just telling the compiler that if a variable is set equal to a function call of said function, whatever follows the return statement is what that variable should be set equal to. However, simply returning a value does not "store" it. See the following code:
def example():
x = 'Hello World'
return x
example()
print(x) #This will still cause a reference error
x = example()
print(x) #This prints: Hello World
One final thing to note about the code above: as long as two variables are in different scopes, they can have the same name and not cause an error. The x inside the function is in a local scope and the x outside of the function is in the global scope which is why that does not cause an error.
Welcome to Stack Overflow. When I was learning programming, it helped me to think of calls to functions using an analogy to variables in math. In most languages, you can think of "substituting" the return value in for the function call, the same way you can substitute a literal number into a variable.
In math, you can do this:
m = 4
b = 2
y = m * x + b # Plug 4 and 2 in for "m" and "b"
y = 4 * x + 2
It's the same with value-returning functions:
def foo():
return 'bar'
>>> x = foo() # Plug the return value 'bar' in for "foo()"
>>> x
'bar'
In Python, when a function has no explicit return, the default return value is None. So:
def foo():
print('bar')
# No return, so Python implicitly returns None
>>> x = foo() # Plug the return value None in for "foo()"
'bar'
>>> x
None
the function define local variable even same name as global variable so when it executed if you don't return something or store the result in global variable the result not appears outside function
example
x = 10
def test():
x= 15
test()
print(x) # result 10
but if use global keyword you can access to global variable like this
x = 10
def test():
global x
x= 15
test()
print(x) #result 15
or if you return the value
x = 10
def test():
x= 15
return x
x = test()
print(x) #result 15
What does the return statement do? How should it be used in Python?
How does return differ from print?
See also
Often, people try to use print in a loop inside a function in order to see multiple values, and want to be able to use the results from outside. They need to be returned, but return exits the function the first time. See How can I use `return` to get back multiple values from a loop? Can I put them in a list?.
Often, beginners will write a function that ultimately prints something rather than returning it, and then also try to print the result, resulting in an unexpected None. See Why is "None" printed after my function's output?.
Occasionally in 3.x, people try to assign the result of print to a name, or use it in another expression, like input(print('prompt:')). In 3.x, print is a function, so this is not a syntax error, but it returns None rather than what was displayed. See Why does the print function return None?.
Occasionally, people write code that tries to print the result from a recursive call, rather than returning it properly. Just as if the function were merely called, this does not work to propagate the value back through the recursion. See Why does my recursive function return None?.
Consider How do I get a result (output) from a function? How can I use the result later? for questions that are simply about how to use return, without considering print.
The print() function writes, i.e., "prints", a string in the console. The return statement causes your function to exit and hand back a value to its caller. The point of functions in general is to take in inputs and return something. The return statement is used when a function is ready to return a value to its caller.
For example, here's a function utilizing both print() and return:
def foo():
print("hello from inside of foo")
return 1
Now you can run code that calls foo, like so:
if __name__ == '__main__':
print("going to call foo")
x = foo()
print("called foo")
print("foo returned " + str(x))
If you run this as a script (e.g. a .py file) as opposed to in the Python interpreter, you will get the following output:
going to call foo
hello from inside foo
called foo
foo returned 1
I hope this makes it clearer. The interpreter writes return values to the console so I can see why somebody could be confused.
Here's another example from the interpreter that demonstrates that:
>>> def foo():
... print("hello within foo")
... return 1
...
>>> foo()
hello within foo
1
>>> def bar():
... return 10 * foo()
...
>>> bar()
hello within foo
10
You can see that when foo() is called from bar(), 1 isn't written to the console. Instead it is used to calculate the value returned from bar().
print() is a function that causes a side effect (it writes a string in the console), but execution resumes with the next statement. return causes the function to stop executing and hand a value back to whatever called it.
Think of the print statement as causing a side-effect, it makes your function write some text out to the user, but it can't be used by another function.
I'll attempt to explain this better with some examples, and a couple definitions from Wikipedia.
Here is the definition of a function from Wikipedia
A function, in mathematics, associates one quantity, the argument of the function, also known as the input, with another quantity, the value of the function, also known as the output..
Think about that for a second. What does it mean when you say the function has a value?
What it means is that you can actually substitute the value of a function with a normal value! (Assuming the two values are the same type of value)
Why would you want that you ask?
What about other functions that may accept the same type of value as an input?
def square(n):
return n * n
def add_one(n):
return n + 1
print square(12)
# square(12) is the same as writing 144
print add_one(square(12))
print add_one(144)
#These both have the same output
There is a fancy mathematical term for functions that only depend on their inputs to produce their outputs: Referential Transparency. Again, a definition from Wikipedia.
Referential transparency and referential opaqueness are properties of parts of computer programs. An expression is said to be referentially transparent if it can be replaced with its value without changing the behavior of a program
It might be a bit hard to grasp what this means if you're just new to programming, but I think you will get it after some experimentation.
In general though, you can do things like print in a function, and you can also have a return statement at the end.
Just remember that when you use return you are basically saying "A call to this function is the same as writing the value that gets returned"
Python will actually insert a return value for you if you decline to put in your own, it's called "None", and it's a special type that simply means nothing, or null.
I think the dictionary is your best reference here
Return and Print
In short:
return gives something back or replies to the caller of the function while print produces text
In python, we start defining a function with def, and generally - but not necessarily - end the function with return.
Suppose we want a function that adds 2 to the input value x. In mathematics, we might write something like f(x) = x + 2, describing that relationship: the value of the function, evaluated at x, is equal to x + 2.
In Python, it looks like this instead:
def f(x):
return x + 2
That is: we define a function named f, which will be given an x value. When the code runs we figure out x + 2, and return that value. Instead of describing a relationship, we lay out steps that must be taken to calculate the result.
After defining the function, it can be called with whatever argument you like. It doesn't have to be named x in the calling code, and it doesn't even have to be a variable:
print f(2)
>>> 4
We could write the code for the function in some other ways. For example:
def f(x):
y = x + 2
return y
or even
def f(x):
x = x + 2
return x
Again, we are following steps in order - x = x + 2 changes what x refers to (now it means the result from the sum), and that is what gets returned by return x (because that's the value *at the time that the return happens).
return means "output this value from this function".
print means "send this value to (generally) stdout"
In the Python REPL, a function's return value will be output to the screen by default (this isn't the same as printing it). This output only happens at the REPL, not when running code from a .py file. It is the same as the output from any other expression at the REPL.
This is an example of print:
>>> n = "foo\nbar" #just assigning a variable. No output
>>> n #the value is output, but it is in a "raw form"
'foo\nbar'
>>> print(n) #the \n is now a newline
foo
bar
>>>
This is an example of return:
>>> def getN():
... return "foo\nbar"
...
>>> getN() #When this isn't assigned to something, it is just output
'foo\nbar'
>>> n = getN() # assigning a variable to the return value. No output
>>> n #the value is output, but it is in a "raw form"
'foo\nbar'
>>> print(n) #the \n is now a newline
foo
bar
>>>
This answer goes over some of the cases that have not been discussed above.
The return statement allows you to terminate the execution of a function before you reach the end. This causes the flow of execution to immediately return to the caller.
In line number 4:
def ret(n):
if n > 9:
temp = "two digits"
return temp #Line 4
else:
temp = "one digit"
return temp #Line 8
print("return statement")
ret(10)
After the conditional statement gets executed the ret() function gets terminated due to return temp (line 4).
Thus the print("return statement") does not get executed.
Output:
two digits
This code that appears after the conditional statements, or the place the flow of control cannot reach, is the dead code.
Returning Values
In lines number 4 and 8, the return statement is being used to return the value of a temporary variable after the condition has been executed.
To bring out the difference between print and return:
def ret(n):
if n > 9:
print("two digits")
return "two digits"
else :
print("one digit")
return "one digit"
ret(25)
Output:
two digits
'two digits'
Note that return can also be used for control flow. By putting one or more return statements in the middle of a function, we can say: "stop executing this function. We've either got what we wanted or something's gone wrong!"
For example, imagine trying to implement str.find(sub) if we only had str.index(sub) available (index raises a ValueError if the substring isn't found, whereas find returns -1).
We could use a try/except block:
def find(s: str, sub: str) -> int:
try:
return s.index(sub)
except ValueError:
return -1
This is fine, and it works, but it's not very expressive. It's not immediately clear what would cause str.index to raise a ValueError: a reader of this code must understand the workings of str.index in order to understand the logic of find.
Rather than add a doc-string, saying "...unless sub isn't found, in which case return -1", we could make the code document itself, like this:
def find(s: str, sub: str) -> int:
if sub not in s:
return -1
return s.index(sub)
This makes the logic very clear.
The other nice thing about this is that once we get to return s.index(sub) we don't need to wrap it in a try/except because we already know that the substring is present!
See the Code Style section of the Python Guide for more advice on this way of using return.
To put it as simply as possible:
return makes the value (a variable, often) available for use by the caller (for example, to be stored by a function that the function using return is within). Without return, your value or variable wouldn't be available for the caller to store/re-use.
print, by contrast, prints to the screen - but does not make the value or variable available for use by the caller.
Difference between "return" and "print" can also be found in the following example:
RETURN:
def bigger(a, b):
if a > b:
return a
elif a <b:
return b
else:
return a
The above code will give correct results for all inputs.
PRINT:
def bigger(a, b):
if a > b:
print a
elif a <b:
print b
else:
print a
NOTE: This will fail for many test cases.
ERROR:
----
FAILURE: Test case input: 3, 8.
Expected result: 8
FAILURE: Test case input: 4, 3.
Expected result: 4
FAILURE: Test case input: 3, 3.
Expected result: 3
You passed 0 out of 3 test cases
Here is my understanding. (hope it will help someone and it's correct).
def count_number_of(x):
count = 0
for item in x:
if item == "what_you_look_for":
count = count + 1
return count
So this simple piece of code counts number of occurrences of something. The placement of return is significant. It tells your program where do you need the value. So when you print, you send output to the screen. When you return you tell the value to go somewhere. In this case you can see that count = 0 is indented with return - we want the value (count + 1) to replace 0.
If you try to follow logic of the code when you indent the return command further the output will always be 1, because we would never tell the initial count to change.
I hope I got it right.
Oh, and return is always inside a function.
return should be used for recursive functions/methods or you want to use the returned value for later applications in your algorithm.
print should be used when you want to display a meaningful and desired output to the user and you don't want to clutter the screen with intermediate results that the user is not interested in, although they are helpful for debugging your code.
The following code shows how to use return and print properly:
def fact(x):
if x < 2:
return 1
return x * fact(x - 1)
print(fact(5))
This explanation is true for all of the programming languages not just python.
return is part of a function definition, while print outputs text to the standard output (usually the console).
A function is a procedure accepting parameters and returning a value. return is for the latter, while the former is done with def.
Example:
def timestwo(x):
return x*2
Best thing about return function is you can return a value from function but you can do same with print so whats the difference ?
Basically return not about just returning it gives output in object form so that we can save that return value from function to any variable but we can't do with print because its same like stdout/cout in C Programming.
Follow below code for better understanding
CODE
def add(a, b):
print "ADDING %d + %d" % (a, b)
return a + b
def subtract(a, b):
print "SUBTRACTING %d - %d" % (a, b)
return a - b
def multiply(a, b):
print "MULTIPLYING %d * %d" % (a, b)
return a * b
def divide(a, b):
print "DIVIDING %d / %d" % (a, b)
return a / b
print "Let's do some math with just functions!"
age = add(30, 5)
height = subtract(78, 4)
weight = multiply(90, 2)
iq = divide(100, 2)
print "Age: %d, Height: %d, Weight: %d, IQ: %d" % (age, height, weight, iq)
# A puzzle for the extra credit, type it in anyway.
print "Here is a puzzle."
what = add(age, subtract(height, multiply(weight, divide(iq, 2))))
print "That becomes: ", what, "Can you do it by hand?"
We are now doing our own math functions for add, subtract, multiply, and divide. The important thing to notice is the last line where we say return a + b (in add). What this does is the following:
Our function is called with two arguments: a and b.
We print out what our function is doing, in this case "ADDING."
Then we tell Python to do something kind of backward: we return the addition of a + b. You might say this as, "I add a and b then return them."
Python adds the two numbers. Then when the function ends, any line that runs it will be able to assign this a + b result to a variable.
The simple truth is that print and return have nothing to do with each other. print is used to display things in the terminal (for command-line programs).1 return is used to get a result back when you call a function, so that you can use it in the next step of the program's logic.
Many beginners are confused when they try out code at Python's interpreter prompt2, like
>>> def example():
... return 1
...
>>> example()
1
The value was displayed; doesn't this mean that return displays things? No. If you try the same code in a .py file, you can see for yourself that running the script doesn't cause the 1 to display.
This shouldn't actually be confusing, because it works the same way as any other expression:
>>> 1 + 1
2
This displays at the interactive prompt, but not if we make a script that just says 1 + 1 and try running it.
Again: if you need something to display as part of your script, print it. If you need to use it in the next step of the calculation, return it.
The secret is that the interactive prompt is causing the result to be displayed, not the code. It's a separate step that the prompt does for you, so that you can see how the code works a step at a time, for testing purposes.
Now, let's see what happens with print:
>>> def example():
... return 'test'
...
>>> print(example())
test
The result will display, whether we have this in an interactive prompt or in a script. print is explicitly used to display the value - and as we can see, it displays differently. The interactive prompt uses what is called the repr of the value that was returned from example, while print uses the str of the value.
In practical terms: print shows us what the value looks like, in text form (for a string, that just means the contents of the string as-is). The interactive prompt shows us what the value is - typically, by writing something that looks like the source code we would use to create it.3
But wait - print is a function, right? (In 3.x, anyway). So it returned a value, right? Isn't the interpreter prompt supposed to display that in its separate step? What happened?
There is one more trick: print returns the special value None, which the interpreter prompt will ignore. We can test this by using some expressions that evaluate to None:
>>> None
>>> [None][0]
>>> def example():
... pass # see footnote 4
...
>>> example()
>>>
In each case, there is no separate line at all for output, not even a blank line - the interpreter prompt just goes back to the prompt.
1 It can also be used to write into files, although this is a less common idea and normally it will be clearer to use the .write method.
2 This is sometimes called the REPL, which stands for "read-eval-print loop".
3 This isn't always practical, or even possible - especially once we start defining our own classes. The firm rule is that repr will lean on the .__repr__ method of the object to do the dirty work; similarly, str leans on .__str__.
4 Functions in Python implicitly return None if they don't explicitly return a value.
Return statement -- will return some values according your function.
def example(n):
if n == 5:
return true
else:
return false
if you call above function and you pass number 5 then it will return true else it will return false.
Printing function -- it will print content that you have given to the print function or with in print function bracket.
def example(n):
if n == 5:
print("number is equal")
else:
print("number is not equal")
What does the return statement do? How should it be used in Python?
How does return differ from print?
See also
Often, people try to use print in a loop inside a function in order to see multiple values, and want to be able to use the results from outside. They need to be returned, but return exits the function the first time. See How can I use `return` to get back multiple values from a loop? Can I put them in a list?.
Often, beginners will write a function that ultimately prints something rather than returning it, and then also try to print the result, resulting in an unexpected None. See Why is "None" printed after my function's output?.
Occasionally in 3.x, people try to assign the result of print to a name, or use it in another expression, like input(print('prompt:')). In 3.x, print is a function, so this is not a syntax error, but it returns None rather than what was displayed. See Why does the print function return None?.
Occasionally, people write code that tries to print the result from a recursive call, rather than returning it properly. Just as if the function were merely called, this does not work to propagate the value back through the recursion. See Why does my recursive function return None?.
Consider How do I get a result (output) from a function? How can I use the result later? for questions that are simply about how to use return, without considering print.
The print() function writes, i.e., "prints", a string in the console. The return statement causes your function to exit and hand back a value to its caller. The point of functions in general is to take in inputs and return something. The return statement is used when a function is ready to return a value to its caller.
For example, here's a function utilizing both print() and return:
def foo():
print("hello from inside of foo")
return 1
Now you can run code that calls foo, like so:
if __name__ == '__main__':
print("going to call foo")
x = foo()
print("called foo")
print("foo returned " + str(x))
If you run this as a script (e.g. a .py file) as opposed to in the Python interpreter, you will get the following output:
going to call foo
hello from inside foo
called foo
foo returned 1
I hope this makes it clearer. The interpreter writes return values to the console so I can see why somebody could be confused.
Here's another example from the interpreter that demonstrates that:
>>> def foo():
... print("hello within foo")
... return 1
...
>>> foo()
hello within foo
1
>>> def bar():
... return 10 * foo()
...
>>> bar()
hello within foo
10
You can see that when foo() is called from bar(), 1 isn't written to the console. Instead it is used to calculate the value returned from bar().
print() is a function that causes a side effect (it writes a string in the console), but execution resumes with the next statement. return causes the function to stop executing and hand a value back to whatever called it.
Think of the print statement as causing a side-effect, it makes your function write some text out to the user, but it can't be used by another function.
I'll attempt to explain this better with some examples, and a couple definitions from Wikipedia.
Here is the definition of a function from Wikipedia
A function, in mathematics, associates one quantity, the argument of the function, also known as the input, with another quantity, the value of the function, also known as the output..
Think about that for a second. What does it mean when you say the function has a value?
What it means is that you can actually substitute the value of a function with a normal value! (Assuming the two values are the same type of value)
Why would you want that you ask?
What about other functions that may accept the same type of value as an input?
def square(n):
return n * n
def add_one(n):
return n + 1
print square(12)
# square(12) is the same as writing 144
print add_one(square(12))
print add_one(144)
#These both have the same output
There is a fancy mathematical term for functions that only depend on their inputs to produce their outputs: Referential Transparency. Again, a definition from Wikipedia.
Referential transparency and referential opaqueness are properties of parts of computer programs. An expression is said to be referentially transparent if it can be replaced with its value without changing the behavior of a program
It might be a bit hard to grasp what this means if you're just new to programming, but I think you will get it after some experimentation.
In general though, you can do things like print in a function, and you can also have a return statement at the end.
Just remember that when you use return you are basically saying "A call to this function is the same as writing the value that gets returned"
Python will actually insert a return value for you if you decline to put in your own, it's called "None", and it's a special type that simply means nothing, or null.
I think the dictionary is your best reference here
Return and Print
In short:
return gives something back or replies to the caller of the function while print produces text
In python, we start defining a function with def, and generally - but not necessarily - end the function with return.
Suppose we want a function that adds 2 to the input value x. In mathematics, we might write something like f(x) = x + 2, describing that relationship: the value of the function, evaluated at x, is equal to x + 2.
In Python, it looks like this instead:
def f(x):
return x + 2
That is: we define a function named f, which will be given an x value. When the code runs we figure out x + 2, and return that value. Instead of describing a relationship, we lay out steps that must be taken to calculate the result.
After defining the function, it can be called with whatever argument you like. It doesn't have to be named x in the calling code, and it doesn't even have to be a variable:
print f(2)
>>> 4
We could write the code for the function in some other ways. For example:
def f(x):
y = x + 2
return y
or even
def f(x):
x = x + 2
return x
Again, we are following steps in order - x = x + 2 changes what x refers to (now it means the result from the sum), and that is what gets returned by return x (because that's the value *at the time that the return happens).
return means "output this value from this function".
print means "send this value to (generally) stdout"
In the Python REPL, a function's return value will be output to the screen by default (this isn't the same as printing it). This output only happens at the REPL, not when running code from a .py file. It is the same as the output from any other expression at the REPL.
This is an example of print:
>>> n = "foo\nbar" #just assigning a variable. No output
>>> n #the value is output, but it is in a "raw form"
'foo\nbar'
>>> print(n) #the \n is now a newline
foo
bar
>>>
This is an example of return:
>>> def getN():
... return "foo\nbar"
...
>>> getN() #When this isn't assigned to something, it is just output
'foo\nbar'
>>> n = getN() # assigning a variable to the return value. No output
>>> n #the value is output, but it is in a "raw form"
'foo\nbar'
>>> print(n) #the \n is now a newline
foo
bar
>>>
This answer goes over some of the cases that have not been discussed above.
The return statement allows you to terminate the execution of a function before you reach the end. This causes the flow of execution to immediately return to the caller.
In line number 4:
def ret(n):
if n > 9:
temp = "two digits"
return temp #Line 4
else:
temp = "one digit"
return temp #Line 8
print("return statement")
ret(10)
After the conditional statement gets executed the ret() function gets terminated due to return temp (line 4).
Thus the print("return statement") does not get executed.
Output:
two digits
This code that appears after the conditional statements, or the place the flow of control cannot reach, is the dead code.
Returning Values
In lines number 4 and 8, the return statement is being used to return the value of a temporary variable after the condition has been executed.
To bring out the difference between print and return:
def ret(n):
if n > 9:
print("two digits")
return "two digits"
else :
print("one digit")
return "one digit"
ret(25)
Output:
two digits
'two digits'
Note that return can also be used for control flow. By putting one or more return statements in the middle of a function, we can say: "stop executing this function. We've either got what we wanted or something's gone wrong!"
For example, imagine trying to implement str.find(sub) if we only had str.index(sub) available (index raises a ValueError if the substring isn't found, whereas find returns -1).
We could use a try/except block:
def find(s: str, sub: str) -> int:
try:
return s.index(sub)
except ValueError:
return -1
This is fine, and it works, but it's not very expressive. It's not immediately clear what would cause str.index to raise a ValueError: a reader of this code must understand the workings of str.index in order to understand the logic of find.
Rather than add a doc-string, saying "...unless sub isn't found, in which case return -1", we could make the code document itself, like this:
def find(s: str, sub: str) -> int:
if sub not in s:
return -1
return s.index(sub)
This makes the logic very clear.
The other nice thing about this is that once we get to return s.index(sub) we don't need to wrap it in a try/except because we already know that the substring is present!
See the Code Style section of the Python Guide for more advice on this way of using return.
To put it as simply as possible:
return makes the value (a variable, often) available for use by the caller (for example, to be stored by a function that the function using return is within). Without return, your value or variable wouldn't be available for the caller to store/re-use.
print, by contrast, prints to the screen - but does not make the value or variable available for use by the caller.
Difference between "return" and "print" can also be found in the following example:
RETURN:
def bigger(a, b):
if a > b:
return a
elif a <b:
return b
else:
return a
The above code will give correct results for all inputs.
PRINT:
def bigger(a, b):
if a > b:
print a
elif a <b:
print b
else:
print a
NOTE: This will fail for many test cases.
ERROR:
----
FAILURE: Test case input: 3, 8.
Expected result: 8
FAILURE: Test case input: 4, 3.
Expected result: 4
FAILURE: Test case input: 3, 3.
Expected result: 3
You passed 0 out of 3 test cases
Here is my understanding. (hope it will help someone and it's correct).
def count_number_of(x):
count = 0
for item in x:
if item == "what_you_look_for":
count = count + 1
return count
So this simple piece of code counts number of occurrences of something. The placement of return is significant. It tells your program where do you need the value. So when you print, you send output to the screen. When you return you tell the value to go somewhere. In this case you can see that count = 0 is indented with return - we want the value (count + 1) to replace 0.
If you try to follow logic of the code when you indent the return command further the output will always be 1, because we would never tell the initial count to change.
I hope I got it right.
Oh, and return is always inside a function.
return should be used for recursive functions/methods or you want to use the returned value for later applications in your algorithm.
print should be used when you want to display a meaningful and desired output to the user and you don't want to clutter the screen with intermediate results that the user is not interested in, although they are helpful for debugging your code.
The following code shows how to use return and print properly:
def fact(x):
if x < 2:
return 1
return x * fact(x - 1)
print(fact(5))
This explanation is true for all of the programming languages not just python.
return is part of a function definition, while print outputs text to the standard output (usually the console).
A function is a procedure accepting parameters and returning a value. return is for the latter, while the former is done with def.
Example:
def timestwo(x):
return x*2
Best thing about return function is you can return a value from function but you can do same with print so whats the difference ?
Basically return not about just returning it gives output in object form so that we can save that return value from function to any variable but we can't do with print because its same like stdout/cout in C Programming.
Follow below code for better understanding
CODE
def add(a, b):
print "ADDING %d + %d" % (a, b)
return a + b
def subtract(a, b):
print "SUBTRACTING %d - %d" % (a, b)
return a - b
def multiply(a, b):
print "MULTIPLYING %d * %d" % (a, b)
return a * b
def divide(a, b):
print "DIVIDING %d / %d" % (a, b)
return a / b
print "Let's do some math with just functions!"
age = add(30, 5)
height = subtract(78, 4)
weight = multiply(90, 2)
iq = divide(100, 2)
print "Age: %d, Height: %d, Weight: %d, IQ: %d" % (age, height, weight, iq)
# A puzzle for the extra credit, type it in anyway.
print "Here is a puzzle."
what = add(age, subtract(height, multiply(weight, divide(iq, 2))))
print "That becomes: ", what, "Can you do it by hand?"
We are now doing our own math functions for add, subtract, multiply, and divide. The important thing to notice is the last line where we say return a + b (in add). What this does is the following:
Our function is called with two arguments: a and b.
We print out what our function is doing, in this case "ADDING."
Then we tell Python to do something kind of backward: we return the addition of a + b. You might say this as, "I add a and b then return them."
Python adds the two numbers. Then when the function ends, any line that runs it will be able to assign this a + b result to a variable.
The simple truth is that print and return have nothing to do with each other. print is used to display things in the terminal (for command-line programs).1 return is used to get a result back when you call a function, so that you can use it in the next step of the program's logic.
Many beginners are confused when they try out code at Python's interpreter prompt2, like
>>> def example():
... return 1
...
>>> example()
1
The value was displayed; doesn't this mean that return displays things? No. If you try the same code in a .py file, you can see for yourself that running the script doesn't cause the 1 to display.
This shouldn't actually be confusing, because it works the same way as any other expression:
>>> 1 + 1
2
This displays at the interactive prompt, but not if we make a script that just says 1 + 1 and try running it.
Again: if you need something to display as part of your script, print it. If you need to use it in the next step of the calculation, return it.
The secret is that the interactive prompt is causing the result to be displayed, not the code. It's a separate step that the prompt does for you, so that you can see how the code works a step at a time, for testing purposes.
Now, let's see what happens with print:
>>> def example():
... return 'test'
...
>>> print(example())
test
The result will display, whether we have this in an interactive prompt or in a script. print is explicitly used to display the value - and as we can see, it displays differently. The interactive prompt uses what is called the repr of the value that was returned from example, while print uses the str of the value.
In practical terms: print shows us what the value looks like, in text form (for a string, that just means the contents of the string as-is). The interactive prompt shows us what the value is - typically, by writing something that looks like the source code we would use to create it.3
But wait - print is a function, right? (In 3.x, anyway). So it returned a value, right? Isn't the interpreter prompt supposed to display that in its separate step? What happened?
There is one more trick: print returns the special value None, which the interpreter prompt will ignore. We can test this by using some expressions that evaluate to None:
>>> None
>>> [None][0]
>>> def example():
... pass # see footnote 4
...
>>> example()
>>>
In each case, there is no separate line at all for output, not even a blank line - the interpreter prompt just goes back to the prompt.
1 It can also be used to write into files, although this is a less common idea and normally it will be clearer to use the .write method.
2 This is sometimes called the REPL, which stands for "read-eval-print loop".
3 This isn't always practical, or even possible - especially once we start defining our own classes. The firm rule is that repr will lean on the .__repr__ method of the object to do the dirty work; similarly, str leans on .__str__.
4 Functions in Python implicitly return None if they don't explicitly return a value.
Return statement -- will return some values according your function.
def example(n):
if n == 5:
return true
else:
return false
if you call above function and you pass number 5 then it will return true else it will return false.
Printing function -- it will print content that you have given to the print function or with in print function bracket.
def example(n):
if n == 5:
print("number is equal")
else:
print("number is not equal")
I have a python function
def foo():
'''
some code
'''
return handle.fetch_some_result()
and I want to achieve the goal:
def foo():
'''
some code
'''
value = handle.fetch_some_result()
print value
return value
So how can I achieve this but not use the above code(a little ugly). Are there some elegant ways to do that but not use the middle var(value) or is it possible in python?
Thx!
You can write easily a helper function that does that, I don't know any built-in:
def print_return(value):
print value
return value
Nothing wrong with how your doing it. If you don't like the print in the function, you could alwsy print the return value.
def foo():
'''
some code
'''
return handle.fetch_some_result()
result = foo()
print result