I installed numpy, scipy and scikit-learn using pip on mac os. However in PyCharm, all imports work except when i try importing sklearn. I tried doing it in the Python shell and it worked fine. Any ideas as to what is causing this?
Also, not sure if it is relevant, but i installed scikit-learn last.
The error I receive is unresolved reference
I managed to figure it out, i had to go to the project interpreter and change the python distribution as it had defaulted the OS installed Python rather than my own installed distribution.
This worked for me:
In my PyCharm Community Edition 5.0.4, Preference -> Project Interpreter -> check whether sklearn package is installed for the current project interpreter, if not, install it.
PyCharm January 2020 Build
Click on File-> Settings
From the Settings Dialog-> Projects-> Your Project
Click on (+) on right side and type search for sklearn
Install it and you are good to go
If you are behind a proxy then first set proxy to AutoDetect
Related
I have downloaded Pandas library with pip install pandas through the command prompt, when I try to import pandas as pd PyCharm returns an error : ModuleNotFoundError: No module named 'pandas'
I have tried to uninstall and install again many times but nothing seems to work. Does anybody know a solution to this?
You can try downloading the library from PyCharm settings:
File -> Settings
then, Project: -> Python Interpreter
Click a + sign to the right,
Search for the pandas library,
and finally, press 'Install Package'
I think you have to choose the right python interpreter. Check my screenshot
You likely have multiple copies of Python installed on your system. PyCharm can be configured to use any version of Python on your system, including any virtual environments you've defined. The solution is to match up the version of Python you've installed Pandas into with the version of Python that PyCharm is using to run your code.
There are two places where you specify a Python version. First of all, your Project has a version associated with it. Check the "Python Interpreter" section of the "Project" section of your Preferences for that. That version is used for syntax highlighting, code completion, etc.
By default, the abovementioned Python version will also be used to run your code. But you can change the version of Python that your code is run with by creating or modifying a Run Configuration. To do this, check the menu next to the Run and Debug toolbar buttons near the top-left of your PyCharm window.
When you do get into the Python Interpreter section of the Preferences, you'll find that you can see all of the modules installed for each Python version that PyCharm knows about. You can use this to check to see if Pandas is installed for a particular Python version.
I would suggest you get comfortable with all that I've said above. It will save you many headaches in the future.
Being a complete begginer in python, I decided to install the python interpreter 3.4.4, and also PyDev plugin for eclipse IDE. I am also using windows 10.
I have encountered a problem regarding certain imports, namely : from PIL import Image, ImageTk, which is apparently an unresolved import.
I have looked at certain questions which were similar to my situation, but most of them gave a solution like installing packaged from the linux apt-get. Here are some topics I visited :
Uninstalling and reinstalling Pillow and pip,
Installing pillow-imaging-tk on Ubuntu,
This topic which left me very confused,
This one seemed helpful, but is on Unix OS again
So please, could someone explain to me why I am seeing this error, and how could I correct it if I absolutely want to use Eclipse, Pydev, windows 10 and Python 3.
Found the solution, here's what I did:
Set the PYTHONPATH like it is shown in this article, make sure python.exe is accessible via cmd,
Via cmd, type pip install pillow. Alternatively, you can enter the same command from Windows+R,
(Not sure if relevant step) Via eclipse, Windows->Preferences->PyDev->PythonInterpreterremove your interpreter to re-add it,
Restart eclipse.
For Python import problems in PyDev, the project web site has a page on interpreter configuration that is a good place to start. I recently had a similar problem that I solved by adding a module to the forced builtins tab.
I have installed the packages TensorFlow and scikit_learn and all its dependencies. When I try importing them using python 2.7.6 or 2.7.10 (I have tried both) in the terminal, it works fine. However, when I do it using pycharm it gives an error.
In the case of scikit_learn with the launcher 2.7.6 says:
ImportError: dynamic module does not define init function (init_check_build)
In the case of scikit_learn with the launcher 2.7.10 says:
ValueError: numpy.dtype has the wrong size, try recompiling
In the case of TensorFlow with the launcher 2.7.6 says:
ImportError: dlopen(/Library/Python/2.7/site-packages/tensorflow/python/_pywrap_tensorflow.so, 2): no suitable image found. Did find:
/Library/Python/2.7/site-packages/tensorflow/python/_pywrap_tensorflow.so: mach-o, but wrong architecture
In the case of TensorFlow with the launcher 2.7.10 says:
ImportError: No module named copyreg
Error importing tensorflow. Unless you are using bazel,
you should not try to import tensorflow from its source directory;
please exit the tensorflow source tree, and relaunch your python interpreter
from there.
I have tried to search in the net but the solutions did not work for me. I have tried to uninstall them and install them again with pip, conda and directly the source code and it gives always the same errors. I have even tried reinstalling pycharm with no better luck.
Other libraries, such as scilab or numpy, work fine in pycharm.
Any ideas? It is just driving me mental. By the way, I am using a Mac OS 10.10.5.
you should start PyCharm from terminal
cd /usr/lib/pycharm-community/bin
./pycharm.sh
Add this 'DYLD_LIBRARY_PATH=/usr/local/cuda/lib' to Python environment variable. Run-> Edit Configurations -> Environment variables. Hope it works.
At the end, I ended up creating a virtual environment, reinstalling everything in there, and calling it through pycharm. I am not entirely sure what was the problem between conda and pycharm, I probably messed up somewhere.
I am now using a different virtual environment depending on the project and I am happier than ever :).
I had a similar problem. My code was was not working on PyCharm professional. I had PyCharm CE previously installed and it worked from there. I had configured PyCharm CE a while ago and I had forgotten what setup I used but if issues persist, make sure that the packages are installed under Preferences > Project > Project Interpreter
hey if there are people still with this problem I would like to tell you the solution. It works for me everytime.
1.Open Pycharm
2.Open PyCharmProject or the folder you are using
3.Click File and there Settings
4.Click Project: PyCharmProjects , there project interpreter
5.Select the global virtual enviroment for this ( including photo thats showing what i did )
6.Check if there are all packages you have installed
I'm trying to run a simple python program in eclipse. This is the first time that I'm importting any module.
So I downloaded: numpy and pylab (I'm using a mac) restarted my eclipse and the red line below the
import numpy
import pylab
disappeared so I understood that the reference to that module is ok.
Problem is that I still see red line below the code and wonder why? I have to stress out that I believe numpy was already 'pre-installed' I just upgraded the version (using 1.5.1-py2.7).
Can anyone tell what should I do to run this code?
my interpreter setting on eclipse:
If you are using PyDev, you should first have to go to Preferences, then Pydev, then Interpreter Python and then Libraries to add NumPy.
Else, verify that you have NumPy installed, from the interpreter, just call from numpy import *
Edit:
Also check you already have Matplotlib installed, the error you are getting on the console points to that being the cause, you can download Matplotlib here.
I recently installed Anaconda3 and just started learning how to use Pandas and I wanted to be able to work with Pandas in Eclipse as well.
I first tried adding a reference to the site-libraries at:
C:\Anaconda3\Lib\site-packages
And it seemed to work by allowing me to import numpy and pandas. However, since I had just used conda to update everything, my Python34 interpreter seemed to fail when I tried running some code and numpy was looking for my Python35 installation. For some reason this was located at:
C:\Users\myname\AppData\Local\Programs\Python\Python35-32
However, Anacondas installed another version somewhere else. By going into:
Windows > Preferences > PyDev > Interpreters > Python Interpreter
and clicking on Quick Auto-Config it found my Anacondas version of Python35 and then I just had to figure out how to make my current project use the Python35 interpreter.
Hint: To do this, you need to go into the Project properties by opening the project and choosing File > Properties or right-click the project to choose Properties.
Simply removed the old numpy and installed version 6. located here
Another way to circumvent this problem is to use pip install numpy check how to install pip
When I write import MySQLdb in Eclipse using the PyDev plugin, I get an unresolved import. However, the program runs without error. I can add an annotation to get the error to go away, but what is the right way to handle this?
How can I help Eclipse know that MySQLdb is there?
It sounds like MySQLdb is somewhere on your sys.path, but not on your Eclipse project's PYTHONPATH; in other words, Eclipse thinks you're going to get an import error at runtime because you haven't fully configured it. Google seems to say that you can alter this setting in Window->Preferences->Preferences->PyDev->Python Interpreter to include the path to your MySQLdb module.
For some help figuring out where MySQLdb might be living on your system:
Open an interactive interpreter,
import MySQLdb
If that succeeds, you can get a hint from: print MySQLdb.__file__; it may be the __init__ file in the package that you need to point the path at.
cdleary above provided the reason two years ago, but this may be easier. Basically, one reinstalls the interpreter.
Select Window - > Preferences -> PyDev -> Interpreter - Python
Select the python interpreter in the upper pane
Click on Remove
Click on Auto Config
Agree to everything.
This works on Fedora 17 using the Eclipse 4.2.0 that came with the package management.
Fixed this by doing two things:
1) Added MySQLdb egg to the PYTHONPATH under Window->Preferences->Preferences->PyDev->Python Interpreter.
C:\Python26\Lib\site-packages\MySQL_python-1.2.3c1-py2.6-win32.egg
2) Close and re-open the .py file that had the red x.
Adding the egg works, but the error remains. The solution for that error can be found by adding
##UnresolvedImport
To the import statement, as in:
import web ##UnresolvedImport
Source: http://klaith.wordpress.com/2009/06/12/pydev-unresolved-import-errors/
I once had a similar problem on Windows (never encountered this on Linux though) and I discovered that I had to include the .egg directory of my library to my PYTHONPATH.
For example my PYTHONPATH (Pydev/Interpreter - Python/Libraries) included:
C:\Python26\Lib\site-packages
and I had to add:
C:\Python26\Lib\site-packages\jinja2-2.2.1-py2.6.egg
to use jinja.
This surely works I just tried it with Pmw package. Unzip package in site-packages. Then remove python interpreter from eclipse and then add it again. Your import errors shall go away. also you may want add module to forced builtins. See How do I fix PyDev "Undefined variable from import" errors? and http://pydev.org/manual_101_interpreter.html
I had a similar issue and the following is what I did to solve my issue. I have a Windows 8 Machine, Python 2.7 installed and running my stuff through eclipse.
Some Background:
When I did an easy install it tries to install MySQL-python 1.2.5 which failed with an error: Unable to find vcvarsall.bat. I did an easy_install of pip and tried the pip install which also failed with a similar error. They both reference vcvarsall.bat which is something to do with visual studio, since I don't have visual studio on my machine, it left me looking for a different solution, which I share below.
The Solution:
Reinstall python 2.7.8 from 2.7.8 from https://www.python.org/download this will add any missing registry settings, which is required by the next install.
Install 1.2.4 from http://pypi.python.org/pypi/MySQL-python/1.2.4
After I did both of those installs, I reopened eclipse and got a prompt to update the paths of eclipse which I accepted, after that I was able to query my MySQL db.
import MySQLdb
If this code show error like this:
Unresolved import: MySQLdb
you should add D:\Python27\Lib\site-packages\MySQLdb to your sys.path.
D:\Python27\Lib\site-packages\MySQLdb is this location where you install MySQLdb in your computer disk. After this step, the error will disappear.