As the title says, is there a way to run a Jupyter Notebook cell in the background (in Python)?
For example, is there a hypothetical magic command %%run_in_background that allows me to kick off a cell to execute in the background without blocking other cells from executing.
Technically you can’t do that, each kernel is like an instance of python, you can only run a script at a time.
You could run the cell, then refresh the browser and run the notebook fresh. The previous command will continue running but there is no way of accessing it in the notebook anymore. You won’t get the result you want, the output from the previous run won’t appear in this new instance.
Your best bet is to use 2 different notebooks, or 2 python scripts or use multiprocessing modules.
I'm wondering if there is a way to setup VS Code to debug like you can in Spyder or closer to a Jupyter or ipython notebook where you can run some block or line of code (with F9 in Spyder) and that code is interpreted and the debugging session is still 'live' if you will.
In VS code I can't seem to run any block of code and then run another block of code in the same session without stopping and starting up another debugging session.
I tend to like to load a bunch of data and then execute arbitrary lines of code after that as i figure out what i want to do with it.
There is an option in the command palette to do this. With your python code open select lines you want to run. Then go to view menu and select command palette. There is a command that says, Python: Run selection/line in Python terminal. This will run just what you select and print out any outputs.
This has been added to VS Code:
https://code.visualstudio.com/docs/python/jupyter-support
i want to interactively debug code that is deeply hidden in some class.
I know that it is possible open the ipdb using
from IPython.core.debugger import Pdb
Pdb().set_trace()
This work also in ipython (jupyter) notebook.
Another possibility that I find very convenient when I am working in the terminal is to open a shell at a specific point using
from IPython import embed
embed()
and then use ipython directly to interact with variables etc.
However, if I use this in notebook, I get a ipython shell embedded into the notebook, and this shell does not even work well (e.g., if I use print, the kernel blocks).
What I would find most convenient is to interrupt the kernel execution at some predefined point in the code and keep all current variables, so that I can use another cell for debugging and the possibility to, e.g., develop and test new code with the current variables.
Is there some way to achieve this?
I would like to add a python code to an ipython notebook that will run every time I close the ipython tab. I tried to see if I can set a cell to do it but I had no luck.
Is this possible either using an ipython API or some other hook mechanism?
One option could be using the atexit python module to register an exit handler. This would work if your page in the IPython notebook is actually a python process.
I use Jupyter Notebook to run a series of experiments that take some time.
Certain cells take way too much time to execute so it's normal that I'd like to close the browser tab and come back later. But when I do the kernel interrupts running.
I guess there is a workaround for this but I can't find it
The simplest workaround to this seems to be the built-in cell magic %%capture:
%%capture output
# Time-consuming code here
Save, close tab, come back later. The output is now stored in the output variable:
output.show()
This will show all interim print results as well as the plain or rich output cell.
TL;DR:
Code doesn't stop on tab closes, but the output can no longer find the current browser session and loses data on how it's supposed to be displayed, causing it to throw out all new output received until the code finishes that was running when the tab closed.
Long Version:
Unfortunately, this isn't implemented (Nov 24th). If there's a workaround, I can't find it either. (Still looking, will update with news.) There is a workaround that saves output then reprints it, but won't work if code is still running in that notebook. An alternative would be to have a second notebook that you can get the output in.
I also need this functionality, and for the same reason. The kernel doesn't shut down or interrupt on tab closes. And the code doesn't stop running when you close a tab. The warning given is exactly correct, "The kernel is busy, outputs may be lost."
Running
import time
a = 0
while a < 100:
a+=1
print(a)
time.sleep(1)
in one box, then closing the tab, opening it up again, and then running
print(a)
from another box will cause it to hang until the 100 seconds have finished and the code completes, then it will print 100.
When a tab is closed, when you return, the python process will be in the same state you left it (when the last save completed). That was their intended behavior, and what they should have been more clear about in their documentation. The output from the run code actually gets sent to the browser upon reopening it, (lost the reference that explains this,) so hacks like the one in this comment will work as it can receive those and just throw them into some cell.
Output is kind of only saved in an accessible way through the endpoint connection. They've been working on this for a while (before Jupyter), although I cannot find the current bug in the Jupyter repository (this one references it, but is not it).
The only general workaround seems to be finding a computer you can always leave on, and leaving that on the page while it runs, then remote in or rely on autosave to be able to access it elsewhere. This is a bad way to do it, but unfortunately, the way I have to for now.
Related questions:
Closed IPython Notebook that was running code
Confirms that output will not be updated, but does not mention the interrupt functionality.
IPython Notebook - Keep printing to notebook output after closing browser
Offers a workaround in a link. Referenced above
First, install
runipy
pip install runipy
And now run your notebook in the background with the below command:
nohup runipy YourNotebook.ipynb OutputNotebook.ipynb >> notebook.log &
now the output file will be saved and also you can see the logs while running with:
tail -f notebook.log
I am struggling with this issue as well for some time now.
My workaround was to write all my logs to a file, so that when my browser closes (indeed when a lot of logs come through browser it hangs up too) I can see the kernel job process by opening the log file (the log file can be open using Jupyter too).
#!/usr/bin/python
import time
import datetime
import logging
logger = logging.getLogger()
def setup_file_logger(log_file):
hdlr = logging.FileHandler(log_file)
formatter = logging.Formatter('%(asctime)s %(levelname)s %(message)s')
hdlr.setFormatter(formatter)
logger.addHandler(hdlr)
logger.setLevel(logging.INFO)
def log(message):
#outputs to Jupyter console
print('{} {}'.format(datetime.datetime.now(), message))
#outputs to file
logger.info(message)
setup_file_logger('out.log')
for i in range(10000):
log('Doing hard work here i=' + str(i))
log('Taking a nap now...')
time.sleep(1000)
With JupyterLab:
This is not a problem if you are using JupyterLab (with current release v3.x.x).
To be more specific, not a problem means that, after we close the tab/browser, the notebook's kernel is kept running (so long as the jupyter server/your terminal is not closed). But the printing output of the cell (if there is any) is interrupted.
So, when we reopen the notebook, variables and etc. are all kept and updated, except the interrupted printing output.
If you care about the printing info in this case, you could try to logging it to a file. OR try using Jupyter's execute API (see below).
With Jupyter Notebook:
If you are still sticking with legacy (e.g. version 5.x/6.x) Jupyter Notebook, well, it is still not possible in the past (i.e prior to 2022).
BUT, with the planned new Notebook v7 release, by reusing the the JupyterLab codebase, this problem will also be solved in the new Jupyter Notebook.
So, try using JupyterLab or wait and updating to Notebook v7:
$ jupyter lab --version
$ 3.4.4
$ # OR waite and update the notebook, untill
$ # make sure the installed version of notebook is v7
$ jupyter notebook --version
$ 6.4.12
With Jupyter's execute API:
Other workaround is by using Jupyter's execute API:
$ jupyter nbconvert --to notebook --execute mynotebook.ipynb
This is like running the notebook as a .py file, i.e. from the command line, not a web browser UI mode.
After its execution, a new file named mynotebook.nbconvert.ipynb will be produced, and all printing output will be kept in it, but all variables will be lost. What we could do is pickling the variables that we care about.
And I don't think using runipy is still a good choice, since it's deprecated and unmaintained (after Jupyter's execute API).
ref:
Q: is it possible to make a jupyter notebook run even if the page is closed?
A: This is being solved in JupyterLab and will be solved in the future Notebook v7 release.
If you've set all cells to run and want to periodically check what's being printed, the following code would be a better option than %%capture. You can always open up the log file while kernel is busy.
import sys
sys.stdout = open("my_log.txt", "a")
I've constructed this awhile ago using jupyter nbconvert, essentially running a notebook in the background without any UI:
nohup jupyter nbconvert --ExecutePreprocessor.timeout=-1 --CodeFoldingPreprocessor.remove_folded_code=False --ExecutePreprocessor.allow_errors=True --ExecutePreprocessor.kernel_name=python3 --execute --to notebook --inplace ~/mynotebook.ipynb > ~/stdout.log 2> ~/stderr.log &
timeout=-1 no time out
remove_folded_code=False if you have Codefolding extension enabled
allow_errors=True ignore errored cells and continue running the notebook to the end
kernel_name if you have multiple kernels, check with jupyter kernelspec list