Related
My python script uses subprocess to call a linux utility that is very noisy. I want to store all of the output to a log file and show some of it to the user. I thought the following would work, but the output doesn't show up in my application until the utility has produced a significant amount of output.
#fake_utility.py, just generates lots of output over time
import time
i = 0
while True:
print hex(i)*512
i += 1
time.sleep(0.5)
#filters output
import subprocess
proc = subprocess.Popen(['python','fake_utility.py'],stdout=subprocess.PIPE)
for line in proc.stdout:
#the real code does filtering here
print "test:", line.rstrip()
The behavior I really want is for the filter script to print each line as it is received from the subprocess. Sorta like what tee does but with python code.
What am I missing? Is this even possible?
Update:
If a sys.stdout.flush() is added to fake_utility.py, the code has the desired behavior in python 3.1. I'm using python 2.6. You would think that using proc.stdout.xreadlines() would work the same as py3k, but it doesn't.
Update 2:
Here is the minimal working code.
#fake_utility.py, just generates lots of output over time
import sys, time
for i in range(10):
print i
sys.stdout.flush()
time.sleep(0.5)
#display out put line by line
import subprocess
proc = subprocess.Popen(['python','fake_utility.py'],stdout=subprocess.PIPE)
#works in python 3.0+
#for line in proc.stdout:
for line in iter(proc.stdout.readline,''):
print line.rstrip()
I think the problem is with the statement for line in proc.stdout, which reads the entire input before iterating over it. The solution is to use readline() instead:
#filters output
import subprocess
proc = subprocess.Popen(['python','fake_utility.py'],stdout=subprocess.PIPE)
while True:
line = proc.stdout.readline()
if not line:
break
#the real code does filtering here
print "test:", line.rstrip()
Of course you still have to deal with the subprocess' buffering.
Note: according to the documentation the solution with an iterator should be equivalent to using readline(), except for the read-ahead buffer, but (or exactly because of this) the proposed change did produce different results for me (Python 2.5 on Windows XP).
Bit late to the party, but was surprised not to see what I think is the simplest solution here:
import io
import subprocess
proc = subprocess.Popen(["prog", "arg"], stdout=subprocess.PIPE)
for line in io.TextIOWrapper(proc.stdout, encoding="utf-8"): # or another encoding
# do something with line
(This requires Python 3.)
Indeed, if you sorted out the iterator then buffering could now be your problem. You could tell the python in the sub-process not to buffer its output.
proc = subprocess.Popen(['python','fake_utility.py'],stdout=subprocess.PIPE)
becomes
proc = subprocess.Popen(['python','-u', 'fake_utility.py'],stdout=subprocess.PIPE)
I have needed this when calling python from within python.
You want to pass these extra parameters to subprocess.Popen:
bufsize=1, universal_newlines=True
Then you can iterate as in your example. (Tested with Python 3.5)
A function that allows iterating over both stdout and stderr concurrently, in realtime, line by line
In case you need to get the output stream for both stdout and stderr at the same time, you can use the following function.
The function uses Queues to merge both Popen pipes into a single iterator.
Here we create the function read_popen_pipes():
from queue import Queue, Empty
from concurrent.futures import ThreadPoolExecutor
def enqueue_output(file, queue):
for line in iter(file.readline, ''):
queue.put(line)
file.close()
def read_popen_pipes(p):
with ThreadPoolExecutor(2) as pool:
q_stdout, q_stderr = Queue(), Queue()
pool.submit(enqueue_output, p.stdout, q_stdout)
pool.submit(enqueue_output, p.stderr, q_stderr)
while True:
if p.poll() is not None and q_stdout.empty() and q_stderr.empty():
break
out_line = err_line = ''
try:
out_line = q_stdout.get_nowait()
except Empty:
pass
try:
err_line = q_stderr.get_nowait()
except Empty:
pass
yield (out_line, err_line)
read_popen_pipes() in use:
import subprocess as sp
with sp.Popen(my_cmd, stdout=sp.PIPE, stderr=sp.PIPE, text=True) as p:
for out_line, err_line in read_popen_pipes(p):
# Do stuff with each line, e.g.:
print(out_line, end='')
print(err_line, end='')
return p.poll() # return status-code
You can also read lines w/o loop. Works in python3.6.
import os
import subprocess
process = subprocess.Popen(command, stdout=subprocess.PIPE)
list_of_byte_strings = process.stdout.readlines()
Pythont 3.5 added the methods run() and call() to the subprocess module, both returning a CompletedProcess object. With this you are fine using proc.stdout.splitlines():
proc = subprocess.run( comman, shell=True, capture_output=True, text=True, check=True )
for line in proc.stdout.splitlines():
print "stdout:", line
See also How to Execute Shell Commands in Python Using the Subprocess Run Method
I tried this with python3 and it worked, source
When you use popen to spawn the new thread, you tell the operating system to PIPE the stdout of the child processes so the parent process can read it and here, stderr is copied to the stderr of the parent process.
in output_reader we read each line of stdout of the child process by wrapping it in an iterator that populates line by line output from the child process whenever a new line is ready.
def output_reader(proc):
for line in iter(proc.stdout.readline, b''):
print('got line: {0}'.format(line.decode('utf-8')), end='')
def main():
proc = subprocess.Popen(['python', 'fake_utility.py'],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT)
t = threading.Thread(target=output_reader, args=(proc,))
t.start()
try:
time.sleep(0.2)
import time
i = 0
while True:
print (hex(i)*512)
i += 1
time.sleep(0.5)
finally:
proc.terminate()
try:
proc.wait(timeout=0.2)
print('== subprocess exited with rc =', proc.returncode)
except subprocess.TimeoutExpired:
print('subprocess did not terminate in time')
t.join()
The following modification of Rômulo's answer works for me on Python 2 and 3 (2.7.12 and 3.6.1):
import os
import subprocess
process = subprocess.Popen(command, stdout=subprocess.PIPE)
while True:
line = process.stdout.readline()
if line != '':
os.write(1, line)
else:
break
I was having a problem with the arg list of Popen to update servers, the following code resolves this a bit.
import getpass
from subprocess import Popen, PIPE
username = 'user1'
ip = '127.0.0.1'
print ('What is the password?')
password = getpass.getpass()
cmd1 = f"""sshpass -p {password} ssh {username}#{ip}"""
cmd2 = f"""echo {password} | sudo -S apt update"""
cmd3 = " && "
cmd4 = f"""echo {password} | sudo -S apt upgrade -y"""
cmd5 = " && "
cmd6 = "exit"
commands = [cmd1, cmd2, cmd3, cmd4, cmd5, cmd6]
command = " ".join(commands)
cmd = command.split()
with Popen(cmd, stdout=PIPE, bufsize=1, universal_newlines=True) as p:
for line in p.stdout:
print(line, end='')
And to run the update on a local computer, the following code example does this.
import getpass
from subprocess import Popen, PIPE
print ('What is the password?')
password = getpass.getpass()
cmd1_local = f"""apt update"""
cmd2_local = f"""apt upgrade -y"""
commands = [cmd1_local, cmd2_local]
with Popen(['echo', password], stdout=PIPE) as auth:
for cmd in commands:
cmd = cmd.split()
with Popen(['sudo','-S'] + cmd, stdin=auth.stdout, stdout=PIPE, bufsize=1, universal_newlines=True) as p:
for line in p.stdout:
print(line, end='')
I am writing a program which initiates a connection to a remote machine, then dynamically sending multiple commands to it by monitoring the response. Instead of using pexpect, what else can I use? I am trying to use subprocess.Popen, but communicate() method will kill the process.
Pexpect version: 2.4, http://www.bx.psu.edu/~nate/pexpect/pexpect.html
Referring to the API for subprocess in:
https://docs.python.org/2/library/subprocess.html#subprocess.Popen.communicate
Popen.communicate(input=None)
Interact with process: Send data to stdin. Read data from stdout and stderr, until end-of-file is reached. Wait for process to terminate. The optional input argument should be a string to be sent to the child process, or None, if no data should be sent to the child.
Thanks
Refer the subprocess documentation to understand the basics here
You could do something like this ...
Again, this is just a pointer... this approach may/may not be a best fit for your use case.
Explore -> and Test to find what works for you!
import shlex
import subprocess
import sys
class Command(object):
""" Generic Command Interface ."""
def execute(self, cmd):
proc = subprocess.Popen(shlex.split(cmd), stdout=subprocess.PIPE)
stdout_value = proc.communicate()[0]
exit_value = proc.poll()
if exit_value:
logger.error('Command execution failed. Command : %s' % cmd)
return exit_value, stdout_value
if __name__ == '__main__':
cmd = Command()
host = '' # HOSTNAME GOES HERE
cmd_str = '' # YOUR COMMAND GOES HERE
cmdline = 'ksh -c "ssh root#{0} "{1}""'.format(host, cmd_str)
exit_value, stdout_value = cmd.execute(cmdline)
if exit_value == 0:
# execute other command/s
# you basically use the same logic as above
else:
# return Or execute other command/s
I have a script that I want to run from within Python (2.6.5) that follows the logic below:
Prompts the user for a password. It looks like ("Enter password: ") (*Note: Input does not echo to screen)
Output irrelevant information
Prompt the user for a response ("Blah Blah filename.txt blah blah (Y/N)?: ")
The last prompt line contains text which I need to parse (filename.txt). The response provided doesn't matter (the program could actually exit here without providing one, as long as I can parse the line).
My requirements are somewhat similar to Wrapping an interactive command line application in a Python script, but the responses there seem a bit confusing, and mine still hangs even when the OP mentions that it doesn't for him.
Through looking around, I've come to the conclusion that subprocess is the best way of doing this, but I'm having a few issues. Here is my Popen line:
p = subprocess.Popen("cmd", shell=True, stdout=subprocess.PIPE,
stderr=subprocess.STDOUT, stdin=subprocess.PIPE)
When I call a read() or readline() on stdout, the prompt is printer to the screen and it hangs.
If I call a write("password\n") for stdin, the prompt is written to the screen and it hangs. The text in write() is not written (I don't the cursor move the a new line).
If I call p.communicate("password\n"), same behavior as write()
I was looking for a few ideas here on the best way to input to stdin and possibly how to parse the last line in the output if your feeling generous, though I could probably figure that out eventually.
If you are communicating with a program that subprocess spawns, you should check out A non-blocking read on a subprocess.PIPE in Python. I had a similar problem with my application and found using queues to be the best way to do ongoing communication with a subprocess.
As for getting values from the user, you can always use the raw_input() builtin to get responses, and for passwords, try using the getpass module to get non-echoing passwords from your user. You can then parse those responses and write them to your subprocess' stdin.
I ended up doing something akin to the following:
import sys
import subprocess
from threading import Thread
try:
from Queue import Queue, Empty
except ImportError:
from queue import Queue, Empty # Python 3.x
def enqueue_output(out, queue):
for line in iter(out.readline, b''):
queue.put(line)
out.close()
def getOutput(outQueue):
outStr = ''
try:
while True: # Adds output from the Queue until it is empty
outStr+=outQueue.get_nowait()
except Empty:
return outStr
p = subprocess.Popen("cmd", stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE, shell=False, universal_newlines=True)
outQueue = Queue()
errQueue = Queue()
outThread = Thread(target=enqueue_output, args=(p.stdout, outQueue))
errThread = Thread(target=enqueue_output, args=(p.stderr, errQueue))
outThread.daemon = True
errThread.daemon = True
outThread.start()
errThread.start()
try:
someInput = raw_input("Input: ")
except NameError:
someInput = input("Input: ")
p.stdin.write(someInput)
errors = getOutput(errQueue)
output = getOutput(outQueue)
Once you have the queues made and the threads started, you can loop through getting input from the user, getting errors and output from the process, and processing and displaying them to the user.
Using threading it might be slightly overkill for simple tasks.
Instead os.spawnvpe can be used. It will spawn script shell as a process. You will be able to communicate interactively with the script.
In this example I passed password as an argument, obviously that is not a good idea.
import os
import sys
from getpass import unix_getpass
def cmd(cmd):
cmd = cmd.split()
code = os.spawnvpe(os.P_WAIT, cmd[0], cmd, os.environ)
if code == 127:
sys.stderr.write('{0}: command not found\n'.format(cmd[0]))
return code
password = unix_getpass('Password: ')
cmd_run = './run.sh --password {0}'.format(password)
cmd(cmd_run)
pattern = raw_input('Pattern: ')
lines = []
with open('filename.txt', 'r') as fd:
for line in fd:
if pattern in line:
lines.append(line)
# manipulate lines
If you just want a user to enter a password without it being echoed to the screen just use the standard library's getpass module:
import getpass
print("You entered:", getpass.getpass())
NOTE:The prompt for this function defaults to "Password: " also this will only work on command lines where echoing can be controlled. So if it doesn't work try running it from terminal.
To launch programs from my Python-scripts, I'm using the following method:
def execute(command):
process = subprocess.Popen(command, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
output = process.communicate()[0]
exitCode = process.returncode
if (exitCode == 0):
return output
else:
raise ProcessException(command, exitCode, output)
So when i launch a process like Process.execute("mvn clean install"), my program waits until the process is finished, and only then i get the complete output of my program. This is annoying if i'm running a process that takes a while to finish.
Can I let my program write the process output line by line, by polling the process output before it finishes in a loop or something?
I found this article which might be related.
You can use iter to process lines as soon as the command outputs them: lines = iter(fd.readline, ""). Here's a full example showing a typical use case (thanks to #jfs for helping out):
from __future__ import print_function # Only Python 2.x
import subprocess
def execute(cmd):
popen = subprocess.Popen(cmd, stdout=subprocess.PIPE, universal_newlines=True)
for stdout_line in iter(popen.stdout.readline, ""):
yield stdout_line
popen.stdout.close()
return_code = popen.wait()
if return_code:
raise subprocess.CalledProcessError(return_code, cmd)
# Example
for path in execute(["locate", "a"]):
print(path, end="")
To print subprocess' output line-by-line as soon as its stdout buffer is flushed in Python 3:
from subprocess import Popen, PIPE, CalledProcessError
with Popen(cmd, stdout=PIPE, bufsize=1, universal_newlines=True) as p:
for line in p.stdout:
print(line, end='') # process line here
if p.returncode != 0:
raise CalledProcessError(p.returncode, p.args)
Notice: you do not need p.poll() -- the loop ends when eof is reached. And you do not need iter(p.stdout.readline, '') -- the read-ahead bug is fixed in Python 3.
See also, Python: read streaming input from subprocess.communicate().
Ok i managed to solve it without threads (any suggestions why using threads would be better are appreciated) by using a snippet from this question Intercepting stdout of a subprocess while it is running
def execute(command):
process = subprocess.Popen(command, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
# Poll process for new output until finished
while True:
nextline = process.stdout.readline()
if nextline == '' and process.poll() is not None:
break
sys.stdout.write(nextline)
sys.stdout.flush()
output = process.communicate()[0]
exitCode = process.returncode
if (exitCode == 0):
return output
else:
raise ProcessException(command, exitCode, output)
There is actually a really simple way to do this when you just want to print the output:
import subprocess
import sys
def execute(command):
subprocess.check_call(command, shell=True, stdout=sys.stdout, stderr=subprocess.STDOUT)
Here we're simply pointing the subprocess to our own stdout, and using existing succeed or exception api.
#tokland
tried your code and corrected it for 3.4 and windows
dir.cmd is a simple dir command, saved as cmd-file
import subprocess
c = "dir.cmd"
def execute(command):
popen = subprocess.Popen(command, stdout=subprocess.PIPE,bufsize=1)
lines_iterator = iter(popen.stdout.readline, b"")
while popen.poll() is None:
for line in lines_iterator:
nline = line.rstrip()
print(nline.decode("latin"), end = "\r\n",flush =True) # yield line
execute(c)
In Python >= 3.5 using subprocess.run works for me:
import subprocess
cmd = 'echo foo; sleep 1; echo foo; sleep 2; echo foo'
subprocess.run(cmd, shell=True)
(getting the output during execution also works without shell=True)
https://docs.python.org/3/library/subprocess.html#subprocess.run
For anyone trying the answers to this question to get the stdout from a Python script note that Python buffers its stdout, and therefore it may take a while to see the stdout.
This can be rectified by adding the following after each stdout write in the target script:
sys.stdout.flush()
To answer the original question, the best way IMO is just redirecting subprocess stdout directly to your program's stdout (optionally, the same can be done for stderr, as in example below)
p = Popen(cmd, stdout=sys.stdout, stderr=sys.stderr)
p.communicate()
In case someone wants to read from both stdout and stderr at the same time using threads, this is what I came up with:
import threading
import subprocess
import Queue
class AsyncLineReader(threading.Thread):
def __init__(self, fd, outputQueue):
threading.Thread.__init__(self)
assert isinstance(outputQueue, Queue.Queue)
assert callable(fd.readline)
self.fd = fd
self.outputQueue = outputQueue
def run(self):
map(self.outputQueue.put, iter(self.fd.readline, ''))
def eof(self):
return not self.is_alive() and self.outputQueue.empty()
#classmethod
def getForFd(cls, fd, start=True):
queue = Queue.Queue()
reader = cls(fd, queue)
if start:
reader.start()
return reader, queue
process = subprocess.Popen(command, shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
(stdoutReader, stdoutQueue) = AsyncLineReader.getForFd(process.stdout)
(stderrReader, stderrQueue) = AsyncLineReader.getForFd(process.stderr)
# Keep checking queues until there is no more output.
while not stdoutReader.eof() or not stderrReader.eof():
# Process all available lines from the stdout Queue.
while not stdoutQueue.empty():
line = stdoutQueue.get()
print 'Received stdout: ' + repr(line)
# Do stuff with stdout line.
# Process all available lines from the stderr Queue.
while not stderrQueue.empty():
line = stderrQueue.get()
print 'Received stderr: ' + repr(line)
# Do stuff with stderr line.
# Sleep for a short time to avoid excessive CPU use while waiting for data.
sleep(0.05)
print "Waiting for async readers to finish..."
stdoutReader.join()
stderrReader.join()
# Close subprocess' file descriptors.
process.stdout.close()
process.stderr.close()
print "Waiting for process to exit..."
returnCode = process.wait()
if returnCode != 0:
raise subprocess.CalledProcessError(returnCode, command)
I just wanted to share this, as I ended up on this question trying to do something similar, but none of the answers solved my problem. Hopefully it helps someone!
Note that in my use case, an external process kills the process that we Popen().
This PoC constantly reads the output from a process and can be accessed when needed. Only the last result is kept, all other output is discarded, hence prevents the PIPE from growing out of memory:
import subprocess
import time
import threading
import Queue
class FlushPipe(object):
def __init__(self):
self.command = ['python', './print_date.py']
self.process = None
self.process_output = Queue.LifoQueue(0)
self.capture_output = threading.Thread(target=self.output_reader)
def output_reader(self):
for line in iter(self.process.stdout.readline, b''):
self.process_output.put_nowait(line)
def start_process(self):
self.process = subprocess.Popen(self.command,
stdout=subprocess.PIPE)
self.capture_output.start()
def get_output_for_processing(self):
line = self.process_output.get()
print ">>>" + line
if __name__ == "__main__":
flush_pipe = FlushPipe()
flush_pipe.start_process()
now = time.time()
while time.time() - now < 10:
flush_pipe.get_output_for_processing()
time.sleep(2.5)
flush_pipe.capture_output.join(timeout=0.001)
flush_pipe.process.kill()
print_date.py
#!/usr/bin/env python
import time
if __name__ == "__main__":
while True:
print str(time.time())
time.sleep(0.01)
output: You can clearly see that there is only output from ~2.5s interval nothing in between.
>>>1520535158.51
>>>1520535161.01
>>>1520535163.51
>>>1520535166.01
This works at least in Python3.4
import subprocess
process = subprocess.Popen(cmd_list, stdout=subprocess.PIPE)
for line in process.stdout:
print(line.decode().strip())
Building on #jfs's excellent answer, here is a complete working example for you to play with. Requires Python 3.7 or newer.
sub.py
import time
for i in range(10):
print(i, flush=True)
time.sleep(1)
main.py
from subprocess import PIPE, Popen
import sys
with Popen([sys.executable, 'sub.py'], bufsize=1, stdout=PIPE, text=True) as sub:
for line in sub.stdout:
print(line, end='')
Notice the flush argument used in the child script.
None of the answers here addressed all of my needs.
No threads for stdout (no Queues, etc, either)
Non-blocking as I need to check for other things going on
Use PIPE as I needed to do multiple things, e.g. stream output, write to a log file and return a string copy of the output.
A little background: I am using a ThreadPoolExecutor to manage a pool of threads, each launching a subprocess and running them concurrency. (In Python2.7, but this should work in newer 3.x as well). I don't want to use threads just for output gathering as I want as many available as possible for other things (a pool of 20 processes would be using 40 threads just to run; 1 for the process thread and 1 for stdout...and more if you want stderr I guess)
I'm stripping back a lot of exception and such here so this is based on code that works in production. Hopefully I didn't ruin it in the copy and paste. Also, feedback very much welcome!
import time
import fcntl
import subprocess
import time
proc = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
# Make stdout non-blocking when using read/readline
proc_stdout = proc.stdout
fl = fcntl.fcntl(proc_stdout, fcntl.F_GETFL)
fcntl.fcntl(proc_stdout, fcntl.F_SETFL, fl | os.O_NONBLOCK)
def handle_stdout(proc_stream, my_buffer, echo_streams=True, log_file=None):
"""A little inline function to handle the stdout business. """
# fcntl makes readline non-blocking so it raises an IOError when empty
try:
for s in iter(proc_stream.readline, ''): # replace '' with b'' for Python 3
my_buffer.append(s)
if echo_streams:
sys.stdout.write(s)
if log_file:
log_file.write(s)
except IOError:
pass
# The main loop while subprocess is running
stdout_parts = []
while proc.poll() is None:
handle_stdout(proc_stdout, stdout_parts)
# ...Check for other things here...
# For example, check a multiprocessor.Value('b') to proc.kill()
time.sleep(0.01)
# Not sure if this is needed, but run it again just to be sure we got it all?
handle_stdout(proc_stdout, stdout_parts)
stdout_str = "".join(stdout_parts) # Just to demo
I'm sure there is overhead being added here but it is not a concern in my case. Functionally it does what I need. The only thing I haven't solved is why this works perfectly for log messages but I see some print messages show up later and all at once.
import time
import sys
import subprocess
import threading
import queue
cmd='esptool.py --chip esp8266 write_flash -z 0x1000 /home/pi/zero2/fw/base/boot_40m.bin'
cmd2='esptool.py --chip esp32 -b 115200 write_flash -z 0x1000 /home/pi/zero2/fw/test.bin'
cmd3='esptool.py --chip esp32 -b 115200 erase_flash'
class ExecutorFlushSTDOUT(object):
def __init__(self,timeout=15):
self.process = None
self.process_output = queue.Queue(0)
self.capture_output = threading.Thread(target=self.output_reader)
self.timeout=timeout
self.result=False
self.validator=None
def output_reader(self):
start=time.time()
while self.process.poll() is None and (time.time() - start) < self.timeout:
try:
if not self.process_output.full():
line=self.process.stdout.readline()
if line:
line=line.decode().rstrip("\n")
start=time.time()
self.process_output.put(line)
if self.validator:
if self.validator in line: print("Valid");self.result=True
except:pass
self.process.kill()
return
def start_process(self,cmd_list,callback=None,validator=None,timeout=None):
if timeout: self.timeout=timeout
self.validator=validator
self.process = subprocess.Popen(cmd_list,stdout=subprocess.PIPE,stderr=subprocess.PIPE,shell=True)
self.capture_output.start()
line=None
self.result=False
while self.process.poll() is None:
try:
if not self.process_output.empty():
line = self.process_output.get()
if line:
if callback:callback(line)
#print(line)
line=None
except:pass
error = self.process.returncode
if error:
print("Error Found",str(error))
raise RuntimeError(error)
return self.result
execute = ExecutorFlushSTDOUT()
def liveOUTPUT(line):
print("liveOUTPUT",line)
try:
if "Writing" in line:
line=''.join([n for n in line.split(' ')[3] if n.isdigit()])
print("percent={}".format(line))
except Exception as e:
pass
result=execute.start_process(cmd2,callback=liveOUTPUT,validator="Hash of data verified.")
print("Finish",result)
Use the -u Python option with subprocess.Popen() if you want to print from stdout while the process is running. (shell=True is necessary, despite the risks...)
Simple better than complex.
os library has built-in module system. You should execute your code and see the output.
import os
os.system("python --version")
# Output
"""
Python 3.8.6
0
"""
After version it is also printed return value as 0.
In Python 3.6 I used this:
import subprocess
cmd = "command"
output = subprocess.call(cmd, shell=True)
print(process)
I'd like to use the subprocess module in the following way:
create a new process that potentially takes a long time to execute.
capture stdout (or stderr, or potentially both, either together or separately)
Process data from the subprocess as it comes in, perhaps firing events on every line received (in wxPython say) or simply printing them out for now.
I've created processes with Popen, but if I use communicate() the data comes at me all at once, once the process has terminated.
If I create a separate thread that does a blocking readline() of myprocess.stdout (using stdout = subprocess.PIPE) I don't get any lines with this method either, until the process terminates. (no matter what I set as bufsize)
Is there a way to deal with this that isn't horrendous, and works well on multiple platforms?
Update with code that appears not to work (on windows anyway)
class ThreadWorker(threading.Thread):
def __init__(self, callable, *args, **kwargs):
super(ThreadWorker, self).__init__()
self.callable = callable
self.args = args
self.kwargs = kwargs
self.setDaemon(True)
def run(self):
try:
self.callable(*self.args, **self.kwargs)
except wx.PyDeadObjectError:
pass
except Exception, e:
print e
if __name__ == "__main__":
import os
from subprocess import Popen, PIPE
def worker(pipe):
while True:
line = pipe.readline()
if line == '': break
else: print line
proc = Popen("python subprocess_test.py", shell=True, stdin=PIPE, stdout=PIPE, stderr=PIPE)
stdout_worker = ThreadWorker(worker, proc.stdout)
stderr_worker = ThreadWorker(worker, proc.stderr)
stdout_worker.start()
stderr_worker.start()
while True: pass
stdout will be buffered - so you won't get anything till that buffer is filled, or the subprocess exits.
You can try flushing stdout from the sub-process, or using stderr, or changing stdout on non-buffered mode.
It sounds like the issue might be the use of buffered output by the subprocess - if a relatively small amount of output is created, it could be buffered until the subprocess exits. Some background can be found here:
Here's what worked for me:
cmd = ["./tester_script.bash"]
p = subprocess.Popen( cmd, shell=False, stdout=subprocess.PIPE, stderr=subprocess.PIPE )
while p.poll() is None:
out = p.stdout.readline()
do_something_with( out, err )
In your case you could try to pass a reference to the sub-process to your Worker Thread, and do the polling inside the thread. I don't know how it will behave when two threads poll (and interact with) the same subprocess, but it may work.
Also note thate the while p.poll() is None: is intended as is. Do not replace it with while not p.poll() as in python 0 (the returncode for successful termination) is also considered False.
I've been running into this problem as well. The problem occurs because you are trying to read stderr as well. If there are no errors, then trying to read from stderr would block.
On Windows, there is no easy way to poll() file descriptors (only Winsock sockets).
So a solution is not to try and read from stderr.
Using pexpect [http://www.noah.org/wiki/Pexpect] with non-blocking readlines will resolve this problem. It stems from the fact that pipes are buffered, and so your app's output is getting buffered by the pipe, therefore you can't get to that output until the buffer fills or the process dies.
This seems to be a well-known Python limitation, see
PEP 3145 and maybe others.
Read one character at a time: http://blog.thelinuxkid.com/2013/06/get-python-subprocess-output-without.html
import contextlib
import subprocess
# Unix, Windows and old Macintosh end-of-line
newlines = ['\n', '\r\n', '\r']
def unbuffered(proc, stream='stdout'):
stream = getattr(proc, stream)
with contextlib.closing(stream):
while True:
out = []
last = stream.read(1)
# Don't loop forever
if last == '' and proc.poll() is not None:
break
while last not in newlines:
# Don't loop forever
if last == '' and proc.poll() is not None:
break
out.append(last)
last = stream.read(1)
out = ''.join(out)
yield out
def example():
cmd = ['ls', '-l', '/']
proc = subprocess.Popen(
cmd,
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
# Make all end-of-lines '\n'
universal_newlines=True,
)
for line in unbuffered(proc):
print line
example()
Using subprocess.Popen, I can run the .exe of one of my C# projects and redirect the output to my Python file. I am able now to print() all the information being output to the C# console (using Console.WriteLine()) to the Python console.
Python code:
from subprocess import Popen, PIPE, STDOUT
p = Popen('ConsoleDataImporter.exe', stdout = PIPE, stderr = STDOUT, shell = True)
while True:
line = p.stdout.readline()
print(line)
if not line:
break
This gets the console output of my .NET project line by line as it is created and breaks out of the enclosing while loop upon the project's termination. I'd imagine this would work for two python files as well.
I've used the pexpect module for this, it seems to work ok. http://sourceforge.net/projects/pexpect/