This question already has answers here:
How do I run a Python program in the Command Prompt in Windows 7?
(24 answers)
Closed 7 years ago.
So I'm an extreme beginner to programming, just starting the Python class on Coursera. Using Python 2.7.10
Anyway, I made a simple print statement script in Notepad++
print "Hello World"
and saved as a python file on my desktop
newprog.py
However when I try to run it a cmd window appears and disappears and I'm not quite sure whats wrong.
The other question that this was linked as a duplicate to is about accessing python through the command prompt, which I don't have a problem with. From answers given it is now apparent to me that my dilemma was due to an erroneous belief that the interpreter would remain open after running whatever script I wrote.
Sounds like your program simply opened, ran and exited. So nothing was wrong, it just all happened a bit quick for you to see it.
You should run it from a command prompt or get an IDE like Pycharm, which will allow you to both write and run your script in one program.
To run from command prompt, use either Windows Key + R and type 'cmd' or click start and type 'cmd' into search box. Then you can drag your script to the command prompt window and press Enter to run it.
If you wanted to run it by double click, you'd need something to stop it from finishing until you'd read the message. To achieve this you can use the raw_input function, which waits for user input.
So your script would then look like
print "Hello World"
raw_input("Press Enter to exit")
Then you could double click and press enter when you are ready to exit.
Go to the command prompt window
python
then type in
execfile('path to newfile.py here')
Your file will now be executed
I'm running python 3.4.3. But it should be the same, I hope.
Go go "..\PythonXX\Lib\idlelib" and look for idle.pyw NOT idle.py and using the you're able to execute simple one line commands like the one you have up there.
From that you can also create a new file and do more complicated stuff.
If you create a shortcut to your desktop, you'll be able to access it easier.
Let me know if it helps, or at least correct path.
Your script is probably working and then finishing, the result is shown but not for long. I recommend opening the console and running your script from there, or you could use a simple batch file to run python scripts and then wait for a key press.
To open the console you can use the Windows key along the R key, Win-R (to run a new process) and write cmd, or you look for cmd in your Window's start menu.
With the console opened, you must locate the path where your script is, you can use the cd (Change Directory) to get there, for example:
cd C:\Users\your_name\Desktop
and then write:
python newprog.py
to run your script.
Another option is to use this simple batch file (save it as python34.bat or similar, but the extension must be .bat, put it wherever you like):
#ECHO OFF
C:\Python34\python.exe %*
pause
#ECHO ON
And then use that to run your scripts by right clicking a python script file, open with (run with) and use this batch script as default (if you want). Also, if you have another version of Python, or is installed elsewhere, you must change the "C:\Python34\" part.
This is a computer we're talking about here. It might take you triple the time it takes a computer to multiple two numbers for example. With this notion in mind, the computer quickly prints then exits.
raw_input() # at the end of script wait for user to supply input, delaying script exit
Related
I'm a beginner in Python with no prior programming experience, so bear with me here.
I installed Python, started playing with it (typing variables, playing with math operations) in the Shell window and everything is fine. I open a New Window and started writing a simple script. Something like this:
print (1+1)
I press Run Module, and I am asked to name and save the script first. I do so by calling it firstscript.py, and save it to my desktop.
Now I press Run Module, and in the shell window 2 is printed on the screen. Everything is fine. I close Python, and open it up again. Now in the shell window, I type firstscript.py and I get the red message NameError: name 'firstscript' is not defined.
I can run my program only if I open the script file on my desktop and press Run Module from there, but if I try to start it up directly in IDLE Shell by typing its name, I get the error message.
What did I do wrong? Thank you.
Good to see that you are starting with python.
Firstly, you can run the file directly using 'Run Module' only when you have the file open. Once you save the file and quit, you are out of the file editor and back to the terminal.
Simply typing in firstscripty.py will not work as it does not recognize the command.
To run the file from the terminal, use the below code:
python [locationOfFile\]firstscript.py
You can check out this detailed explanation: https://realpython.com/python-idle/#how-to-work-with-python-files
The problem here is the Shell doesnt know that your firstscript.py is sitting on the desktop
The simplest way i suggest using cmd with:
python C:\Users\{your user}\Desktop\firstscript.py
https://medium.com/never-too-late-to-machine-learn/how-to-step-by-step-setup-notepad-to-run-python-scripts-e1ce3b3ac7fe
I am reading from this tutorial linked above.
What I am doing is trying to run python for the first time on Notepad++. I've downloaded python, etc.
What I am lost on is this:
"Just copy the location of the python exe file, and let’s go back to Notepad++. The execute screen is waiting for us.
In the execute screen, paste the location of Python followed with “$(FILE_NAME)” "
What is the execute screen, where am I pasting the location to?
I hope someone can help me. Thank you.
first, you need "$(FULL_CURRENT_PATH)" for full path of file, the $(FILE_NAME) is for file name only or relative path
then you can paste like
C:\Python39\python.exe "$(FULL_CURRENT_PATH)"
for execute screen, new name for the menu is Execute NppExec Script.. see image below
to run your python script in notepad++ is quite simple:
make sure your python is correctly installed, open your console and type python, you should see something similar to the following (it should say Python X.Y.Z accordingly to the version you have installed)
now that we know that python is correctly installed, go to notepad++, open on it your desire script and go to the Run menu and select Run...
enter the following command python -i "$(FULL_CURRENT_PATH)" and press Run
You should see the following
And that is all.
-
Now that the previous worked, lets make it more reusable, repeat step 1 and 2, but instead of Run press Save..., give it a name (like python for example) and if you so desire also a keyboard binding (a key combination to press to run this command)
Now in step 1, you can pick python (or whatever you name it) instead or "Run..." to run you script (or press you key combination if you give it one)
now some additional explanation about the previous command python -i "$(FULL_CURRENT_PATH)"
the -i option is to enter in interactive mode, that is run you script and then continue executing python so you can do more python stuff with everything for your script loaded in there too, that way the console doesn't just close intermediately after your script is done running.
$(FULL_CURRENT_PATH) is a command for notepad++ to said to substitute there for the full path of your given script
Alternative command: cmd /K CD "$(CURRENT_DIRECTORY)" & python -i "$(FILE_NAME)"
This command is the equivalent to opening your console (cmd /K), move with cd to the folder where your script is (CD "$(CURRENT_DIRECTORY)") and then run your script with python in interactive mode (python -i "$(FILE_NAME)") and & is to separate both instructions (the /K is like python's -i but for the console) (the "-i" is now optional, but I prefer it with it to test other stuff in the script without need to put it on the script because doing so make little sense...)
Why you might want to use this over the other? two reason:
the first is when dealing files so you don't have to type the full path of a given file that sit next to your script so you can use just the name of said file, aka set the working directory to that where the script is located, otherwise it will be that where notepad++ is located (usually it might be like "C:\Program Files\Notepad++").
In case of an error, the windows will remain open so you can know what was the error instead of closing abruptly.
How to associate .py files to open CMD with py then the filename? Maybe in a .bat file?
sorry about my poor English, and if I insist on subjects you already master, it's my first constructive answer here ;p
I'm not sure about what you want to achieve but from your question and its tags I assume tha you want to :
run ".py" file containing a python script from the file explorer by double clicking it
have a cmd.exe window open after this action with your python script interpreted
have a way to review this scipt output without relying on superman eyes able to gasp 65536 characters per millisecond
So basically, if you have a script printing "Hello World !", you want to click on it, and see in a cmd.exe window the text "Hello World !" displayed to validate that your script is working properly ? To make it short you are RIGHT, a .bat file will be enough to do the trick, even if there is a whole bunch of alternatives including executable generation to embed a full python interpreter (see http://www.py2exe.org/), or simply adding a wait loop at the end of your script, but having a batch script associated is probably the lightest and easiest solution in your case.
As you figured out, associating .py files with the python interpreter will run your scripts but the console window will dissapear immediatly on completion without letting you the time to consider the output. You just need to associate .py files (right click -> open with, if you want to do it programatically it's possible to set this in the windows registry) with a .bat script that will do the job, that is, run the script and wait until you are ready to "leave".
This batch script will take the python script you clicked on as an argument, run it with your python interpreter and pause it's execution, waiting for your input before leaving. Since the default windows file association will execute your target program and pass it the file executed (should it be a click or a "start XXX" command) it's pretty straightforward, the bricks to do this in batch are :
program_name argument : to directly call an external command, so "python my_script.py" will run the python.exe program (no need to add the ".exe" or "'.com" part since it's an obvious case for windows) with my_script.py as argument, provided that your python executable directory is in your PATH environment variable, otherwise you will have to provide the full path, ie: "C:\Python27\python.exe my_script.py" .
%X : to reference command line arguments sent to your script (%1 for the first one, then %2 etc.,)
pause : a command that will display the message "Press any key to continue ...", and obviously wait for any key before leaving your script
evantually, #echo off : to avoid printing each batch command before its execution
So, assuming that your python interpreter is installed in C:\Python27 (please replace with whatever version / location for your python.exe, or just "python" if it's in your PATH) your batch script could look like something like this :
#echo off
C:\Python27\python.exe %1
pause
Save it somewhere, associate it with .py files, and you are done. HTH
You can do it in two separate ways:
First, you can rename your .py file to .pyw and just open it and the script would be executed immediately (with pythonw.exe) but this is not showing you a console output.
Or you can simple associate your .py files with standard python.exe which will show the console output.
I am learning Python and came across this problem. I know that i can put "input()" at the bottom of the program, but the problem is that it IS there, but console terminates nevertheless. It seems like the programm never starts at all. I am using the 3.5 version of Python.
Open a terminal, navigate to the directory of your file, and type python myfile.py. If you just double click the file in your system explorer it will run and close when it finishes, which is often too fast to see what's going on.
I think you are starting the programme by clicking on it don't do that to run your programme follow following steps
1.open command prompt
2. go to the path where you have your python programme
3. use command for python for eg: python programme.py in linux
4. if it says python command not recognised probably because the path to python executable is not present in system path add it to environment variable and that should work fine
I need your help. I'm a newbie and I'm learning python. I know to write basic codes. But, when I execute the code in Python(command line) it closes immediately. Is there any piece of code that can prevent this from happening or a trick? Please help me out. Cheers!
P.S: I use Python 2.7 in Windows.
If you're seeing a Command Prompt open and immediately close when you double-click your .py file, that's to be expected - it's not how you're supposed to run a console-based Python script.
What you should do is start a Command Prompt via the Start menu, then run your program by typing c:\python27\python.exe myscript.py or similar.
Alternatively, use a Python IDE (eg. Idle) or an editor (eg. Scite) that can run Python scripts.
The usual way to do this is from outside of Python, as RichieHindle's answer shows.
However, if you want to create a .py script that you can double-click, and it will wait for a response before exiting, you can just add this to the end of your program:
raw_input('Press ENTER to quit')
(If you've written .BAT files before, this is similar to writing PAUSE in a batch file.)
python 2
raw_input('Press Enter To Continue')
python 3
input('Press Enter To Continue')