Related
I want to install pip. It should support Python 3, but it requires setuptools, which is available only for Python 2.
How can I install pip with Python 3?
edit: Manual installation and use of setuptools is not the standard process anymore.
If you're running Python 2.7.9+ or Python 3.4+
Congrats, you should already have pip installed. If you do not, read onward.
If you're running a Unix-like System
You can usually install the package for pip through your package manager if your version of Python is older than 2.7.9 or 3.4, or if your system did not include it for whatever reason.
Instructions for some of the more common distros follow.
Installing on Debian (Wheezy and newer) and Ubuntu (Trusty Tahr and newer) for Python 2.x
Run the following command from a terminal:
sudo apt-get install python-pip
Installing on Debian (Wheezy and newer) and Ubuntu (Trusty Tahr and newer) for Python 3.x
Run the following command from a terminal:
sudo apt-get install python3-pip
Note:
On a fresh Debian/Ubuntu install, the package may not be found until you do:
sudo apt-get update
Installing pip on CentOS 7 for Python 2.x
On CentOS 7, you have to install setup tools first, and then use that to install pip, as there is no direct package for it.
sudo yum install python-setuptools
sudo easy_install pip
Installing pip on CentOS 7 for Python 3.x
Assuming you installed Python 3.4 from EPEL, you can install Python 3's setup tools and use it to install pip.
# First command requires you to have enabled EPEL for CentOS7
sudo yum install python34-setuptools
sudo easy_install pip
If your Unix/Linux distro doesn't have it in package repos
Install using the manual way detailed below.
The manual way
If you want to do it the manual way, the now-recommended method is to install using the get-pip.py script from pip's installation instructions.
Install pip
To install pip, securely download get-pip.py
Then run the following (which may require administrator access):
python get-pip.py
If setuptools is not already installed, get-pip.py will install setuptools for you.
I was able to install pip for python 3 on Ubuntu just by running sudo apt-get install python3-pip.
Python 3.4+ and Python 2.7.9+
Good news! Python 3.4 (released March 2014) ships with Pip. This is the best feature of any Python release. It makes the community's wealth of libraries accessible to everyone. Newbies are no longer excluded by the prohibitive difficulty of setup. In shipping with a package manager, Python joins Ruby, Nodejs, Haskell, Perl, Go--almost every other contemporary language with a majority open-source community. Thank you Python.
Of course, that doesn't mean Python packaging is problem solved. The experience remains frustrating. I discuss this at Does Python have a package/module management system?
Alas for everyone using an earlier Python. Manual instructions follow.
Python ≤ 2.7.8 and Python ≤ 3.3
Follow my detailed instructions at https://stackoverflow.com/a/12476379/284795 . Essentially
Official instructions
Per https://pip.pypa.io/en/stable/installing.html
Download get-pip.py, being careful to save it as a .py file rather than .txt. Then, run it from the command prompt.
python get-pip.py
You possibly need an administrator command prompt to do this. Follow http://technet.microsoft.com/en-us/library/cc947813(v=ws.10).aspx
For me, this installed Pip at C:\Python27\Scripts\pip.exe. Find pip.exe on your computer, then add its folder (eg. C:\Python27\Scripts) to your path (Start / Edit environment variables). Now you should be able to run pip from the command line. Try installing a package:
pip install httpie
There you go (hopefully)!
if you're using python 3.4+
just type:
python3 -m pip
For Ubuntu 12.04 or older,
sudo apt-get install python3-pip
won't work. Instead, use:
sudo apt-get install python3-setuptools ca-certificates
sudo easy_install3 pip
Update 2015-01-20:
As per https://pip.pypa.io/en/latest/installing.html the current way is:
wget https://bootstrap.pypa.io/get-pip.py
python get-pip.py
I think that should work for any version
Original Answer:
wget http://python-distribute.org/distribute_setup.py
python distribute_setup.py
easy_install pip
Single Python in system
To install packages in Python always follow these steps:
If the package is for python 2.x: sudo python -m pip install [package]
If the package is for python 3.x: sudo python3 -m pip install [package]
Note: This is assuming no alias is set for python
Through this method, there will be no confusion regarding which python version is receiving the package.
Multiple Pythons/Virtual Envs
Say you have python3 ↔ python3.6 and python3.7 ↔ python3.7
To install for python3.6: sudo python3 -m pip install [package]
To instal for python3.7: sudo python3.7 -m pip install [package]
This is essentially the same method as shown previously.
Note 1
How to find which python? Do one of the following:
~ » python3 -c "import sys; print(sys.version)"
3.9.5 (default, Nov 18 2021, 16:00:48)
your python3 command spawns:
~ » python3
Python 3.9.5 (default, Nov 18 2021, 16:00:48)
[GCC 10.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
Notice python 3.9.5 in the second line.
or say you are using virtual env and see where your python points to:
» which python
/home/ganesh/os/np-test/bin/python
Note 2
Change what python3 or python points to: https://askubuntu.com/questions/320996/how-to-make-python-program-command-execute-python-3
python3 -m ensurepip
I'm not sure when exactly this was introduced, but it's installed pip3 for me when it didn't already exist.
Older version of Homebrew
If you are on macOS, use homebrew.
brew install python3 # this installs python only
brew postinstall python3 # this command installs pip
Also note that you should check the console if the install finished successfully. Sometimes it doesn't (e.g. an error due to ownership), but people simply overlook the log.
UPDATED - Homebrew version after 1.5
According to the official Homebrew page:
On 1st March 2018 the python formula will be upgraded to Python 3.x and a python#2 formula will be added for installing Python 2.7 (although this will be keg-only so neither python nor python2 will be added to the PATH by default without a manual brew link --force). We will maintain python2, python3 and python#3 aliases.
So to install Python 3, run the following command:
brew install python3
Then, the pip is installed automatically, and you can install any package by pip install <package>.
If your Linux distro came with Python already installed, you should be able to install PIP using your system’s package manager. This is preferable since system-installed versions of Python do not play nicely with the get-pip.py script used on Windows and Mac.
Advanced Package Tool (Python 2.x)
sudo apt-get install python-pip
Advanced Package Tool (Python 3.x)
sudo apt-get install python3-pip
pacman Package Manager (Python 2.x)
sudo pacman -S python2-pip
pacman Package Manager (Python 3.x)
sudo pacman -S python-pip
Yum Package Manager (Python 2.x)
sudo yum upgrade python-setuptools
sudo yum install python-pip python-wheel
Yum Package Manager (Python 3.x)
sudo yum install python3 python3-wheel
Dandified Yum (Python 2.x)
sudo dnf upgrade python-setuptools
sudo dnf install python-pip python-wheel
Dandified Yum (Python 3.x)
sudo dnf install python3 python3-wheel
Zypper Package Manager (Python 2.x)
sudo zypper install python-pip python-setuptools python-wheel
Zypper Package Manager (Python 3.x)
sudo zypper install python3-pip python3-setuptools python3-wheel
This is the one-liner I copy-and-paste:
curl https://bootstrap.pypa.io/get-pip.py | python3
Alternate:
curl -L get-pip.io | python3
From Installing with get-pip.py:
To install pip, securely download get-pip.py by following this link:
get-pip.py. Alternatively, use
curl:
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
Then run the following command in the folder where you have downloaded
get-pip.py:
python get-pip.py
Warning: Be cautious if you are using a Python install that is managed
by your operating system or another package manager. get-pip.py does
not coordinate with those tools, and may leave your system in an
inconsistent state.
If you use several different versions of python try using virtualenv http://www.virtualenv.org/en/latest/virtualenv.html#installation
With the advantage of pip for each local environment.
Then install a local environment in the current directory by:
virtualenv -p /usr/local/bin/python3.3 ENV --verbose
Note that you specify the path to a python binary you have installed on your system.
Then there are now an local pythonenvironment in that folder. ./ENV
Now there should be ./ENV/pip-3.3
use
./ENV/pip-3.3 freeze to list the local installed libraries.
use ./ENV/pip-3.3 install packagename to install at the local environment.
use ./ENV/python3.3 pythonfile.py to run your python script.
Here is my way to solve this problem at ubuntu 12.04:
sudo apt-get install build-essential libncursesw5-dev libssl-dev libgdbm-dev libc6-dev libsqlite3-dev tk-dev
Then install the python3 from source code:
wget https://www.python.org/ftp/python/3.4.0/Python-3.4.0.tar.xz
tar xvf Python-3.4.0.tar.xz
cd Python-3.4.0
./configure
make
make test
sudo make install
When you finished installing all of them, pip3 will get installed automatically.
This is what I did on OS X Mavericks to get this to work.
Firstly, have brew installed
Install python 3.4
brew install python3
Then I get the latest version of distribute:
wget https://pypi.python.org/packages/source/d/distribute/distribute-0.7.3.zip#md5=c6c59594a7b180af57af8a0cc0cf5b4a
unzip distribute-0.7.3.zip
cd distribute-0.7.3
sudo setup.py install
sudo easy_install-3.4 pip
sudo pip3.4 install virtualenv
sudo pip3.4 install virtualenvwrapper
mkvirtualenv py3
python --version
Python 3.4.1
I hope this helps.
pip is installed together when you install Python. You can use
sudo pip install (module)
or
python3 -m pip install (module).
Please follow below steps to install python 3 with pip:
Step 1 : Install Python from download here
Step 2 : you’ll need to download get-pip.py
Step 3 : After download get-pip.py , open your commant prompt and go to directory where your get-pip.py file saved .
Step 4 : Enter command python get-pip.py in cmd.
Step 5 : Pip installed successfully , Verify pip installation by type command in cmd pip --version
What’s New In Python 3.4
...
pip should always be available
...
By default, the commands pipX and pipX.Y will be installed on all platforms (where X.Y stands for the version of the Python installation), along with the pip Python package and its dependencies.
https://docs.python.org/3/whatsnew/3.4.html#whatsnew-pep-453
so if you have python 3.4 installed, you can just: sudo pip3 install xxx
For python3 try this:
wget https://bitbucket.org/pypa/setuptools/raw/bootstrap/ez_setup.py -O - | python
The good thing is that It will also detect what version of python you have (even if it's an environment of python in your custom location).
After this you can proceed normally with (for example)
pip install numpy
source:
https://pypi.python.org/pypi/setuptools/1.1.6#upgrading-from-setuptools-0-6
Assuming you are in a highly restricted computer env (such as myself) without root access or ability to install packages...
I had never setup a fresh/standalone/raw/non-root instance of Python+virtualenv before this post. I had do quite a bit of Googling to make this work.
Decide if you are using python (python2) or python3 and set your PATH correctly. (I am strictly a python3 user.) All commands below can substitute python3 for python if you are python2 user.
wget https://pypi.python.org/packages/source/v/virtualenv/virtualenv-x.y.z.tar.gz
tar -xzvf virtualenv-x.y.z.tar.gz
python3 virtualenv-x.y.z/virtualenv.py --python $(which python3) /path/to/new/virtualenv
source /path/to/new/virtualenv/bin/activate
Assumes you are using a Bourne-compatible shell, e.g., bash
Brilliantly, this virtualenv package includes a standalone version of pip and setuptools that are auto-magically installed into each new virtualenv. This solves the chicken and egg problem.
You may want to create an alias (or update your ~/.bashrc, etc.) for this final command to activate the python virtualenv during each login. It can be a pain to remember all these paths and commands.
Check your version of python now: which python3 should give: /path/to/new/virtualenv/bin/python3
Check pip is also available in the virtualenv via which pip... should give: /path/to/new/virtualenv/bin/pip
Then... pip, pip, pip!
Final tip to newbie Pythoneers: You don't think you need virtualenv when you start, but you will be happy to have it later. Helps with "what if" installation / upgrade scenarios for open source / shared packages.
Ref: https://virtualenv.pypa.io/en/latest/installation.html
To install pip, securely download get-pip.py.
Then run the following:
python get-pip.py
Be cautious if you're using a Python install that's managed by your
operating system or another package manager. get-pip.py does not
coordinate with those tools, and may leave your system in an
inconsistent state.
Refer: PIP Installation
And for Windows 8.1/10 OS Users just open cmd (command prompt)
write this : C:\Users\%USERNAME%\AppData\Local\Programs\Python\Python36-32\Scripts
then
just write this : pip3 install {name of package}
Hint: the location of folder Python36-32 may get different for new python 3.x versions
If you used the command "python get-pip.py", you should have the 'pip' function for Python3. However, 'pip' for Python2 might still be present. In my case I uninstalled 'pip', which removed it from Python2.
After that I ran "python get-pip.py" again. (Make sure that 'get-pip.py' is saved in the same folder as Python3.) The final step was to add the directory with 'pip' command to $PATH. That solved it for me.
=>Easy way to install Python any version on Ubuntu 18.04 or Ubuntu 20.04 follow these steps:-
Step 1: Update Local Repositories:-
sudo apt update
Step 2: Install Supporting Software:-
sudo apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev wget
Step3: Create directory on your home directory To download the newest release of Python Source Code, navigate to the /python-source-files directory and use the wget command:-
mkdir python-source-files
Step 4: Download the Latest Version of Python Source Code:-
wget https://www.python.org/ftp/python/3.7.5/Python-3.7.5.tgz
"you can change python version by just modifies this:-"3.7.5" with the version you want example:-"3.5.2"
Step 5: Extract Compressed Files:-
tar –xf Python-3.7.5.tgz
or
tar xvzf Python-3.7.5.tgz
Step 6: Test System and Optimize Python:-
cd python-3.7.5 or your version of python.
Step 7: Now configure(Using the ––optimization option speeds code execution by 10-20%.):-
./configure ––enable–optimizations
OR you can also do this also if you facing ssl error:-
./configure --with-openssl
Step 8: Install a Second Instance of Python:-
sudo make altinstall
"It is recommended that you use the altinstall method. Your Ubuntu system may have software packages dependent on Python 2.x.
OR
If you want to Overwrite Default Python Installation/version:-
sudo make install"
Step 9:Now check Python Version:-
python3 ––version
Step 10: To install pip for python3 just go with this command:-
sudo apt-get install python3-pip
I want to install pip. It should support Python 3, but it requires setuptools, which is available only for Python 2.
How can I install pip with Python 3?
edit: Manual installation and use of setuptools is not the standard process anymore.
If you're running Python 2.7.9+ or Python 3.4+
Congrats, you should already have pip installed. If you do not, read onward.
If you're running a Unix-like System
You can usually install the package for pip through your package manager if your version of Python is older than 2.7.9 or 3.4, or if your system did not include it for whatever reason.
Instructions for some of the more common distros follow.
Installing on Debian (Wheezy and newer) and Ubuntu (Trusty Tahr and newer) for Python 2.x
Run the following command from a terminal:
sudo apt-get install python-pip
Installing on Debian (Wheezy and newer) and Ubuntu (Trusty Tahr and newer) for Python 3.x
Run the following command from a terminal:
sudo apt-get install python3-pip
Note:
On a fresh Debian/Ubuntu install, the package may not be found until you do:
sudo apt-get update
Installing pip on CentOS 7 for Python 2.x
On CentOS 7, you have to install setup tools first, and then use that to install pip, as there is no direct package for it.
sudo yum install python-setuptools
sudo easy_install pip
Installing pip on CentOS 7 for Python 3.x
Assuming you installed Python 3.4 from EPEL, you can install Python 3's setup tools and use it to install pip.
# First command requires you to have enabled EPEL for CentOS7
sudo yum install python34-setuptools
sudo easy_install pip
If your Unix/Linux distro doesn't have it in package repos
Install using the manual way detailed below.
The manual way
If you want to do it the manual way, the now-recommended method is to install using the get-pip.py script from pip's installation instructions.
Install pip
To install pip, securely download get-pip.py
Then run the following (which may require administrator access):
python get-pip.py
If setuptools is not already installed, get-pip.py will install setuptools for you.
I was able to install pip for python 3 on Ubuntu just by running sudo apt-get install python3-pip.
Python 3.4+ and Python 2.7.9+
Good news! Python 3.4 (released March 2014) ships with Pip. This is the best feature of any Python release. It makes the community's wealth of libraries accessible to everyone. Newbies are no longer excluded by the prohibitive difficulty of setup. In shipping with a package manager, Python joins Ruby, Nodejs, Haskell, Perl, Go--almost every other contemporary language with a majority open-source community. Thank you Python.
Of course, that doesn't mean Python packaging is problem solved. The experience remains frustrating. I discuss this at Does Python have a package/module management system?
Alas for everyone using an earlier Python. Manual instructions follow.
Python ≤ 2.7.8 and Python ≤ 3.3
Follow my detailed instructions at https://stackoverflow.com/a/12476379/284795 . Essentially
Official instructions
Per https://pip.pypa.io/en/stable/installing.html
Download get-pip.py, being careful to save it as a .py file rather than .txt. Then, run it from the command prompt.
python get-pip.py
You possibly need an administrator command prompt to do this. Follow http://technet.microsoft.com/en-us/library/cc947813(v=ws.10).aspx
For me, this installed Pip at C:\Python27\Scripts\pip.exe. Find pip.exe on your computer, then add its folder (eg. C:\Python27\Scripts) to your path (Start / Edit environment variables). Now you should be able to run pip from the command line. Try installing a package:
pip install httpie
There you go (hopefully)!
if you're using python 3.4+
just type:
python3 -m pip
For Ubuntu 12.04 or older,
sudo apt-get install python3-pip
won't work. Instead, use:
sudo apt-get install python3-setuptools ca-certificates
sudo easy_install3 pip
Update 2015-01-20:
As per https://pip.pypa.io/en/latest/installing.html the current way is:
wget https://bootstrap.pypa.io/get-pip.py
python get-pip.py
I think that should work for any version
Original Answer:
wget http://python-distribute.org/distribute_setup.py
python distribute_setup.py
easy_install pip
Single Python in system
To install packages in Python always follow these steps:
If the package is for python 2.x: sudo python -m pip install [package]
If the package is for python 3.x: sudo python3 -m pip install [package]
Note: This is assuming no alias is set for python
Through this method, there will be no confusion regarding which python version is receiving the package.
Multiple Pythons/Virtual Envs
Say you have python3 ↔ python3.6 and python3.7 ↔ python3.7
To install for python3.6: sudo python3 -m pip install [package]
To instal for python3.7: sudo python3.7 -m pip install [package]
This is essentially the same method as shown previously.
Note 1
How to find which python? Do one of the following:
~ » python3 -c "import sys; print(sys.version)"
3.9.5 (default, Nov 18 2021, 16:00:48)
your python3 command spawns:
~ » python3
Python 3.9.5 (default, Nov 18 2021, 16:00:48)
[GCC 10.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
Notice python 3.9.5 in the second line.
or say you are using virtual env and see where your python points to:
» which python
/home/ganesh/os/np-test/bin/python
Note 2
Change what python3 or python points to: https://askubuntu.com/questions/320996/how-to-make-python-program-command-execute-python-3
python3 -m ensurepip
I'm not sure when exactly this was introduced, but it's installed pip3 for me when it didn't already exist.
Older version of Homebrew
If you are on macOS, use homebrew.
brew install python3 # this installs python only
brew postinstall python3 # this command installs pip
Also note that you should check the console if the install finished successfully. Sometimes it doesn't (e.g. an error due to ownership), but people simply overlook the log.
UPDATED - Homebrew version after 1.5
According to the official Homebrew page:
On 1st March 2018 the python formula will be upgraded to Python 3.x and a python#2 formula will be added for installing Python 2.7 (although this will be keg-only so neither python nor python2 will be added to the PATH by default without a manual brew link --force). We will maintain python2, python3 and python#3 aliases.
So to install Python 3, run the following command:
brew install python3
Then, the pip is installed automatically, and you can install any package by pip install <package>.
If your Linux distro came with Python already installed, you should be able to install PIP using your system’s package manager. This is preferable since system-installed versions of Python do not play nicely with the get-pip.py script used on Windows and Mac.
Advanced Package Tool (Python 2.x)
sudo apt-get install python-pip
Advanced Package Tool (Python 3.x)
sudo apt-get install python3-pip
pacman Package Manager (Python 2.x)
sudo pacman -S python2-pip
pacman Package Manager (Python 3.x)
sudo pacman -S python-pip
Yum Package Manager (Python 2.x)
sudo yum upgrade python-setuptools
sudo yum install python-pip python-wheel
Yum Package Manager (Python 3.x)
sudo yum install python3 python3-wheel
Dandified Yum (Python 2.x)
sudo dnf upgrade python-setuptools
sudo dnf install python-pip python-wheel
Dandified Yum (Python 3.x)
sudo dnf install python3 python3-wheel
Zypper Package Manager (Python 2.x)
sudo zypper install python-pip python-setuptools python-wheel
Zypper Package Manager (Python 3.x)
sudo zypper install python3-pip python3-setuptools python3-wheel
This is the one-liner I copy-and-paste:
curl https://bootstrap.pypa.io/get-pip.py | python3
Alternate:
curl -L get-pip.io | python3
From Installing with get-pip.py:
To install pip, securely download get-pip.py by following this link:
get-pip.py. Alternatively, use
curl:
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
Then run the following command in the folder where you have downloaded
get-pip.py:
python get-pip.py
Warning: Be cautious if you are using a Python install that is managed
by your operating system or another package manager. get-pip.py does
not coordinate with those tools, and may leave your system in an
inconsistent state.
If you use several different versions of python try using virtualenv http://www.virtualenv.org/en/latest/virtualenv.html#installation
With the advantage of pip for each local environment.
Then install a local environment in the current directory by:
virtualenv -p /usr/local/bin/python3.3 ENV --verbose
Note that you specify the path to a python binary you have installed on your system.
Then there are now an local pythonenvironment in that folder. ./ENV
Now there should be ./ENV/pip-3.3
use
./ENV/pip-3.3 freeze to list the local installed libraries.
use ./ENV/pip-3.3 install packagename to install at the local environment.
use ./ENV/python3.3 pythonfile.py to run your python script.
Here is my way to solve this problem at ubuntu 12.04:
sudo apt-get install build-essential libncursesw5-dev libssl-dev libgdbm-dev libc6-dev libsqlite3-dev tk-dev
Then install the python3 from source code:
wget https://www.python.org/ftp/python/3.4.0/Python-3.4.0.tar.xz
tar xvf Python-3.4.0.tar.xz
cd Python-3.4.0
./configure
make
make test
sudo make install
When you finished installing all of them, pip3 will get installed automatically.
This is what I did on OS X Mavericks to get this to work.
Firstly, have brew installed
Install python 3.4
brew install python3
Then I get the latest version of distribute:
wget https://pypi.python.org/packages/source/d/distribute/distribute-0.7.3.zip#md5=c6c59594a7b180af57af8a0cc0cf5b4a
unzip distribute-0.7.3.zip
cd distribute-0.7.3
sudo setup.py install
sudo easy_install-3.4 pip
sudo pip3.4 install virtualenv
sudo pip3.4 install virtualenvwrapper
mkvirtualenv py3
python --version
Python 3.4.1
I hope this helps.
pip is installed together when you install Python. You can use
sudo pip install (module)
or
python3 -m pip install (module).
Please follow below steps to install python 3 with pip:
Step 1 : Install Python from download here
Step 2 : you’ll need to download get-pip.py
Step 3 : After download get-pip.py , open your commant prompt and go to directory where your get-pip.py file saved .
Step 4 : Enter command python get-pip.py in cmd.
Step 5 : Pip installed successfully , Verify pip installation by type command in cmd pip --version
What’s New In Python 3.4
...
pip should always be available
...
By default, the commands pipX and pipX.Y will be installed on all platforms (where X.Y stands for the version of the Python installation), along with the pip Python package and its dependencies.
https://docs.python.org/3/whatsnew/3.4.html#whatsnew-pep-453
so if you have python 3.4 installed, you can just: sudo pip3 install xxx
For python3 try this:
wget https://bitbucket.org/pypa/setuptools/raw/bootstrap/ez_setup.py -O - | python
The good thing is that It will also detect what version of python you have (even if it's an environment of python in your custom location).
After this you can proceed normally with (for example)
pip install numpy
source:
https://pypi.python.org/pypi/setuptools/1.1.6#upgrading-from-setuptools-0-6
Assuming you are in a highly restricted computer env (such as myself) without root access or ability to install packages...
I had never setup a fresh/standalone/raw/non-root instance of Python+virtualenv before this post. I had do quite a bit of Googling to make this work.
Decide if you are using python (python2) or python3 and set your PATH correctly. (I am strictly a python3 user.) All commands below can substitute python3 for python if you are python2 user.
wget https://pypi.python.org/packages/source/v/virtualenv/virtualenv-x.y.z.tar.gz
tar -xzvf virtualenv-x.y.z.tar.gz
python3 virtualenv-x.y.z/virtualenv.py --python $(which python3) /path/to/new/virtualenv
source /path/to/new/virtualenv/bin/activate
Assumes you are using a Bourne-compatible shell, e.g., bash
Brilliantly, this virtualenv package includes a standalone version of pip and setuptools that are auto-magically installed into each new virtualenv. This solves the chicken and egg problem.
You may want to create an alias (or update your ~/.bashrc, etc.) for this final command to activate the python virtualenv during each login. It can be a pain to remember all these paths and commands.
Check your version of python now: which python3 should give: /path/to/new/virtualenv/bin/python3
Check pip is also available in the virtualenv via which pip... should give: /path/to/new/virtualenv/bin/pip
Then... pip, pip, pip!
Final tip to newbie Pythoneers: You don't think you need virtualenv when you start, but you will be happy to have it later. Helps with "what if" installation / upgrade scenarios for open source / shared packages.
Ref: https://virtualenv.pypa.io/en/latest/installation.html
To install pip, securely download get-pip.py.
Then run the following:
python get-pip.py
Be cautious if you're using a Python install that's managed by your
operating system or another package manager. get-pip.py does not
coordinate with those tools, and may leave your system in an
inconsistent state.
Refer: PIP Installation
And for Windows 8.1/10 OS Users just open cmd (command prompt)
write this : C:\Users\%USERNAME%\AppData\Local\Programs\Python\Python36-32\Scripts
then
just write this : pip3 install {name of package}
Hint: the location of folder Python36-32 may get different for new python 3.x versions
If you used the command "python get-pip.py", you should have the 'pip' function for Python3. However, 'pip' for Python2 might still be present. In my case I uninstalled 'pip', which removed it from Python2.
After that I ran "python get-pip.py" again. (Make sure that 'get-pip.py' is saved in the same folder as Python3.) The final step was to add the directory with 'pip' command to $PATH. That solved it for me.
=>Easy way to install Python any version on Ubuntu 18.04 or Ubuntu 20.04 follow these steps:-
Step 1: Update Local Repositories:-
sudo apt update
Step 2: Install Supporting Software:-
sudo apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev wget
Step3: Create directory on your home directory To download the newest release of Python Source Code, navigate to the /python-source-files directory and use the wget command:-
mkdir python-source-files
Step 4: Download the Latest Version of Python Source Code:-
wget https://www.python.org/ftp/python/3.7.5/Python-3.7.5.tgz
"you can change python version by just modifies this:-"3.7.5" with the version you want example:-"3.5.2"
Step 5: Extract Compressed Files:-
tar –xf Python-3.7.5.tgz
or
tar xvzf Python-3.7.5.tgz
Step 6: Test System and Optimize Python:-
cd python-3.7.5 or your version of python.
Step 7: Now configure(Using the ––optimization option speeds code execution by 10-20%.):-
./configure ––enable–optimizations
OR you can also do this also if you facing ssl error:-
./configure --with-openssl
Step 8: Install a Second Instance of Python:-
sudo make altinstall
"It is recommended that you use the altinstall method. Your Ubuntu system may have software packages dependent on Python 2.x.
OR
If you want to Overwrite Default Python Installation/version:-
sudo make install"
Step 9:Now check Python Version:-
python3 ––version
Step 10: To install pip for python3 just go with this command:-
sudo apt-get install python3-pip
I want to install pip. It should support Python 3, but it requires setuptools, which is available only for Python 2.
How can I install pip with Python 3?
edit: Manual installation and use of setuptools is not the standard process anymore.
If you're running Python 2.7.9+ or Python 3.4+
Congrats, you should already have pip installed. If you do not, read onward.
If you're running a Unix-like System
You can usually install the package for pip through your package manager if your version of Python is older than 2.7.9 or 3.4, or if your system did not include it for whatever reason.
Instructions for some of the more common distros follow.
Installing on Debian (Wheezy and newer) and Ubuntu (Trusty Tahr and newer) for Python 2.x
Run the following command from a terminal:
sudo apt-get install python-pip
Installing on Debian (Wheezy and newer) and Ubuntu (Trusty Tahr and newer) for Python 3.x
Run the following command from a terminal:
sudo apt-get install python3-pip
Note:
On a fresh Debian/Ubuntu install, the package may not be found until you do:
sudo apt-get update
Installing pip on CentOS 7 for Python 2.x
On CentOS 7, you have to install setup tools first, and then use that to install pip, as there is no direct package for it.
sudo yum install python-setuptools
sudo easy_install pip
Installing pip on CentOS 7 for Python 3.x
Assuming you installed Python 3.4 from EPEL, you can install Python 3's setup tools and use it to install pip.
# First command requires you to have enabled EPEL for CentOS7
sudo yum install python34-setuptools
sudo easy_install pip
If your Unix/Linux distro doesn't have it in package repos
Install using the manual way detailed below.
The manual way
If you want to do it the manual way, the now-recommended method is to install using the get-pip.py script from pip's installation instructions.
Install pip
To install pip, securely download get-pip.py
Then run the following (which may require administrator access):
python get-pip.py
If setuptools is not already installed, get-pip.py will install setuptools for you.
I was able to install pip for python 3 on Ubuntu just by running sudo apt-get install python3-pip.
Python 3.4+ and Python 2.7.9+
Good news! Python 3.4 (released March 2014) ships with Pip. This is the best feature of any Python release. It makes the community's wealth of libraries accessible to everyone. Newbies are no longer excluded by the prohibitive difficulty of setup. In shipping with a package manager, Python joins Ruby, Nodejs, Haskell, Perl, Go--almost every other contemporary language with a majority open-source community. Thank you Python.
Of course, that doesn't mean Python packaging is problem solved. The experience remains frustrating. I discuss this at Does Python have a package/module management system?
Alas for everyone using an earlier Python. Manual instructions follow.
Python ≤ 2.7.8 and Python ≤ 3.3
Follow my detailed instructions at https://stackoverflow.com/a/12476379/284795 . Essentially
Official instructions
Per https://pip.pypa.io/en/stable/installing.html
Download get-pip.py, being careful to save it as a .py file rather than .txt. Then, run it from the command prompt.
python get-pip.py
You possibly need an administrator command prompt to do this. Follow http://technet.microsoft.com/en-us/library/cc947813(v=ws.10).aspx
For me, this installed Pip at C:\Python27\Scripts\pip.exe. Find pip.exe on your computer, then add its folder (eg. C:\Python27\Scripts) to your path (Start / Edit environment variables). Now you should be able to run pip from the command line. Try installing a package:
pip install httpie
There you go (hopefully)!
if you're using python 3.4+
just type:
python3 -m pip
For Ubuntu 12.04 or older,
sudo apt-get install python3-pip
won't work. Instead, use:
sudo apt-get install python3-setuptools ca-certificates
sudo easy_install3 pip
Update 2015-01-20:
As per https://pip.pypa.io/en/latest/installing.html the current way is:
wget https://bootstrap.pypa.io/get-pip.py
python get-pip.py
I think that should work for any version
Original Answer:
wget http://python-distribute.org/distribute_setup.py
python distribute_setup.py
easy_install pip
Single Python in system
To install packages in Python always follow these steps:
If the package is for python 2.x: sudo python -m pip install [package]
If the package is for python 3.x: sudo python3 -m pip install [package]
Note: This is assuming no alias is set for python
Through this method, there will be no confusion regarding which python version is receiving the package.
Multiple Pythons/Virtual Envs
Say you have python3 ↔ python3.6 and python3.7 ↔ python3.7
To install for python3.6: sudo python3 -m pip install [package]
To instal for python3.7: sudo python3.7 -m pip install [package]
This is essentially the same method as shown previously.
Note 1
How to find which python? Do one of the following:
~ » python3 -c "import sys; print(sys.version)"
3.9.5 (default, Nov 18 2021, 16:00:48)
your python3 command spawns:
~ » python3
Python 3.9.5 (default, Nov 18 2021, 16:00:48)
[GCC 10.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
Notice python 3.9.5 in the second line.
or say you are using virtual env and see where your python points to:
» which python
/home/ganesh/os/np-test/bin/python
Note 2
Change what python3 or python points to: https://askubuntu.com/questions/320996/how-to-make-python-program-command-execute-python-3
python3 -m ensurepip
I'm not sure when exactly this was introduced, but it's installed pip3 for me when it didn't already exist.
Older version of Homebrew
If you are on macOS, use homebrew.
brew install python3 # this installs python only
brew postinstall python3 # this command installs pip
Also note that you should check the console if the install finished successfully. Sometimes it doesn't (e.g. an error due to ownership), but people simply overlook the log.
UPDATED - Homebrew version after 1.5
According to the official Homebrew page:
On 1st March 2018 the python formula will be upgraded to Python 3.x and a python#2 formula will be added for installing Python 2.7 (although this will be keg-only so neither python nor python2 will be added to the PATH by default without a manual brew link --force). We will maintain python2, python3 and python#3 aliases.
So to install Python 3, run the following command:
brew install python3
Then, the pip is installed automatically, and you can install any package by pip install <package>.
If your Linux distro came with Python already installed, you should be able to install PIP using your system’s package manager. This is preferable since system-installed versions of Python do not play nicely with the get-pip.py script used on Windows and Mac.
Advanced Package Tool (Python 2.x)
sudo apt-get install python-pip
Advanced Package Tool (Python 3.x)
sudo apt-get install python3-pip
pacman Package Manager (Python 2.x)
sudo pacman -S python2-pip
pacman Package Manager (Python 3.x)
sudo pacman -S python-pip
Yum Package Manager (Python 2.x)
sudo yum upgrade python-setuptools
sudo yum install python-pip python-wheel
Yum Package Manager (Python 3.x)
sudo yum install python3 python3-wheel
Dandified Yum (Python 2.x)
sudo dnf upgrade python-setuptools
sudo dnf install python-pip python-wheel
Dandified Yum (Python 3.x)
sudo dnf install python3 python3-wheel
Zypper Package Manager (Python 2.x)
sudo zypper install python-pip python-setuptools python-wheel
Zypper Package Manager (Python 3.x)
sudo zypper install python3-pip python3-setuptools python3-wheel
This is the one-liner I copy-and-paste:
curl https://bootstrap.pypa.io/get-pip.py | python3
Alternate:
curl -L get-pip.io | python3
From Installing with get-pip.py:
To install pip, securely download get-pip.py by following this link:
get-pip.py. Alternatively, use
curl:
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
Then run the following command in the folder where you have downloaded
get-pip.py:
python get-pip.py
Warning: Be cautious if you are using a Python install that is managed
by your operating system or another package manager. get-pip.py does
not coordinate with those tools, and may leave your system in an
inconsistent state.
If you use several different versions of python try using virtualenv http://www.virtualenv.org/en/latest/virtualenv.html#installation
With the advantage of pip for each local environment.
Then install a local environment in the current directory by:
virtualenv -p /usr/local/bin/python3.3 ENV --verbose
Note that you specify the path to a python binary you have installed on your system.
Then there are now an local pythonenvironment in that folder. ./ENV
Now there should be ./ENV/pip-3.3
use
./ENV/pip-3.3 freeze to list the local installed libraries.
use ./ENV/pip-3.3 install packagename to install at the local environment.
use ./ENV/python3.3 pythonfile.py to run your python script.
Here is my way to solve this problem at ubuntu 12.04:
sudo apt-get install build-essential libncursesw5-dev libssl-dev libgdbm-dev libc6-dev libsqlite3-dev tk-dev
Then install the python3 from source code:
wget https://www.python.org/ftp/python/3.4.0/Python-3.4.0.tar.xz
tar xvf Python-3.4.0.tar.xz
cd Python-3.4.0
./configure
make
make test
sudo make install
When you finished installing all of them, pip3 will get installed automatically.
This is what I did on OS X Mavericks to get this to work.
Firstly, have brew installed
Install python 3.4
brew install python3
Then I get the latest version of distribute:
wget https://pypi.python.org/packages/source/d/distribute/distribute-0.7.3.zip#md5=c6c59594a7b180af57af8a0cc0cf5b4a
unzip distribute-0.7.3.zip
cd distribute-0.7.3
sudo setup.py install
sudo easy_install-3.4 pip
sudo pip3.4 install virtualenv
sudo pip3.4 install virtualenvwrapper
mkvirtualenv py3
python --version
Python 3.4.1
I hope this helps.
pip is installed together when you install Python. You can use
sudo pip install (module)
or
python3 -m pip install (module).
Please follow below steps to install python 3 with pip:
Step 1 : Install Python from download here
Step 2 : you’ll need to download get-pip.py
Step 3 : After download get-pip.py , open your commant prompt and go to directory where your get-pip.py file saved .
Step 4 : Enter command python get-pip.py in cmd.
Step 5 : Pip installed successfully , Verify pip installation by type command in cmd pip --version
What’s New In Python 3.4
...
pip should always be available
...
By default, the commands pipX and pipX.Y will be installed on all platforms (where X.Y stands for the version of the Python installation), along with the pip Python package and its dependencies.
https://docs.python.org/3/whatsnew/3.4.html#whatsnew-pep-453
so if you have python 3.4 installed, you can just: sudo pip3 install xxx
For python3 try this:
wget https://bitbucket.org/pypa/setuptools/raw/bootstrap/ez_setup.py -O - | python
The good thing is that It will also detect what version of python you have (even if it's an environment of python in your custom location).
After this you can proceed normally with (for example)
pip install numpy
source:
https://pypi.python.org/pypi/setuptools/1.1.6#upgrading-from-setuptools-0-6
Assuming you are in a highly restricted computer env (such as myself) without root access or ability to install packages...
I had never setup a fresh/standalone/raw/non-root instance of Python+virtualenv before this post. I had do quite a bit of Googling to make this work.
Decide if you are using python (python2) or python3 and set your PATH correctly. (I am strictly a python3 user.) All commands below can substitute python3 for python if you are python2 user.
wget https://pypi.python.org/packages/source/v/virtualenv/virtualenv-x.y.z.tar.gz
tar -xzvf virtualenv-x.y.z.tar.gz
python3 virtualenv-x.y.z/virtualenv.py --python $(which python3) /path/to/new/virtualenv
source /path/to/new/virtualenv/bin/activate
Assumes you are using a Bourne-compatible shell, e.g., bash
Brilliantly, this virtualenv package includes a standalone version of pip and setuptools that are auto-magically installed into each new virtualenv. This solves the chicken and egg problem.
You may want to create an alias (or update your ~/.bashrc, etc.) for this final command to activate the python virtualenv during each login. It can be a pain to remember all these paths and commands.
Check your version of python now: which python3 should give: /path/to/new/virtualenv/bin/python3
Check pip is also available in the virtualenv via which pip... should give: /path/to/new/virtualenv/bin/pip
Then... pip, pip, pip!
Final tip to newbie Pythoneers: You don't think you need virtualenv when you start, but you will be happy to have it later. Helps with "what if" installation / upgrade scenarios for open source / shared packages.
Ref: https://virtualenv.pypa.io/en/latest/installation.html
To install pip, securely download get-pip.py.
Then run the following:
python get-pip.py
Be cautious if you're using a Python install that's managed by your
operating system or another package manager. get-pip.py does not
coordinate with those tools, and may leave your system in an
inconsistent state.
Refer: PIP Installation
And for Windows 8.1/10 OS Users just open cmd (command prompt)
write this : C:\Users\%USERNAME%\AppData\Local\Programs\Python\Python36-32\Scripts
then
just write this : pip3 install {name of package}
Hint: the location of folder Python36-32 may get different for new python 3.x versions
If you used the command "python get-pip.py", you should have the 'pip' function for Python3. However, 'pip' for Python2 might still be present. In my case I uninstalled 'pip', which removed it from Python2.
After that I ran "python get-pip.py" again. (Make sure that 'get-pip.py' is saved in the same folder as Python3.) The final step was to add the directory with 'pip' command to $PATH. That solved it for me.
=>Easy way to install Python any version on Ubuntu 18.04 or Ubuntu 20.04 follow these steps:-
Step 1: Update Local Repositories:-
sudo apt update
Step 2: Install Supporting Software:-
sudo apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev wget
Step3: Create directory on your home directory To download the newest release of Python Source Code, navigate to the /python-source-files directory and use the wget command:-
mkdir python-source-files
Step 4: Download the Latest Version of Python Source Code:-
wget https://www.python.org/ftp/python/3.7.5/Python-3.7.5.tgz
"you can change python version by just modifies this:-"3.7.5" with the version you want example:-"3.5.2"
Step 5: Extract Compressed Files:-
tar –xf Python-3.7.5.tgz
or
tar xvzf Python-3.7.5.tgz
Step 6: Test System and Optimize Python:-
cd python-3.7.5 or your version of python.
Step 7: Now configure(Using the ––optimization option speeds code execution by 10-20%.):-
./configure ––enable–optimizations
OR you can also do this also if you facing ssl error:-
./configure --with-openssl
Step 8: Install a Second Instance of Python:-
sudo make altinstall
"It is recommended that you use the altinstall method. Your Ubuntu system may have software packages dependent on Python 2.x.
OR
If you want to Overwrite Default Python Installation/version:-
sudo make install"
Step 9:Now check Python Version:-
python3 ––version
Step 10: To install pip for python3 just go with this command:-
sudo apt-get install python3-pip
So my problem is that I have two versions of python: 2.7 and 3.2. I want to install pycrypto on the 2.7 one but when I try to do this:
python2.7 pip install pcrypto
Or:
pip2.7 install pycrypto
It says that python2.7 or pip2.7 is not a recognized command.
What should I do?
pip installs a library for any version of Python 2
pip3 installs a library for any version of Python 3
On linux terminal, type:
whereis pip
It will print all available paths to pip installations. Copy-paste the full path to the desired pip, e.g.:
/usr/local/bin/pip2.7 install pcrypto
If you want to use pip of a specific python interpreter you can use this interpreter with the -m option to use the specific pip.
python -m pip ...
... should be replaced with the desired pip commands.
The -m option allows to run a library module as a script (in this case the associated pip)
I am using OSX and I have pip installed for both Python3.5 and Python2.7. I know I can run the command pip2 to use Python2 and when I use the command pip3 Python3.x will be used.
The problem is that the default of pip is set to Python2.7 and I want it to be Python3.x.
How can I change that?
edit:
No, I am not running a virtual environment yet. If it was a virtual environment I could just run Python3.x and forget all about Python2.7, unfortunately since OSX requires Python2.7 for it's use I can't do that. Hence why I'm asking this.
Thanks for the answer. I however don't want to change what running python does. Instead I would like to change the path that running pip takes. At the moment pip -V shows me pip 8.1.2 from /Library/Python/2.7/site-packages (python 2.7), but I am looking for pip 8.1.2 from /Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/site-packages (python 3.5) I am sure there has to be a way to do this. Any ideas?
Run this:
pip3 install --upgrade --force pip
or even more explicit:
python3 -m pip install --upgrade --force pip
This will install pip for Python 3 and make Python 3 version of pip default.
Validate with:
pip -V
I always just run it via Python itself, this way:
python3 -m pip install some_module
or
python2 -m pip install some_module
The -m calls the __main__.py module of a specified package. Pip supports this.
Can't you alias pip='pip3' in your ~/.bash_profile?
In Terminal, run nano ~/.bash_profile, then add a line to the end that reads alias pip='pip3'. This is safe; it won't affect system processes, only your terminal.
For your projects, you should be using a virtualenv.
You can choose which python will be that of the virtualenv at creation time, by specifying it on the command line:
virtualenv -p python3 env
# then
. env/bin/activate
python # ← will run python3
That python interpreter will be the one used when you run python or pip while the virtualenv is active.
Under the hood, activating the virtualenv will:
modify your PATH environment setting so binaries in env/bin
override those from your system.
modify your PYTHONHOME
environment setting so python modules are loaded from env/lib.
So python, pip and any other package you install with pip will be run from the virtualenv, with the python version you chose and the package versions you installed in the virtualenv.
Other than this, running python without using virtualenv will just run the default python of the system, which you cannot usually change as it would break a lot of system scripts.
It works for me:
As super-user
Uninstall pip
sudo pip uninstall pip
Install pip
sudo python3 -m pip install --upgrade --force pip
Check install path
sudo pip -V
As local-user
Uninstall pip
pip uninstall pip
Install pip
python3 -m pip install --upgrade --force pip
Check install path
pip -V
Although PEP 394 does not specifically mention pip, it does discuss a number of other Python-related commands (including python itself). The short version is that, for reasons of backwards compatibility, the unversioned commands should refer to Python 2.x for the immediate future on most reasonable systems.
Generally, these aliases are implemented as symbolic links, and you can just flip the symlink to point at the version you want (e.g. with ln -f -s $(which pip3) $(which pip) as root). But it may not be a good idea if you have any software that expects to interact with Python 2 (which may be more than you think since a lot of software interacts with Python).
The saner option is to set up a Virtualenv with Python 3. Then, within the Virtualenv, all Python-related commands will refer to 3.x instead of 2.x. This will not break the system, unlike the previous paragraph which could well break things.
Since you have specified in the comments you want syntax like pip install [package] to work, here is a solution:
Install setuptools for Python3: apt-get install python3-setuptools
Now pip for Python3 could be installed by: python3 -m easy_install pip
Now you can use pip with the specific version of Python to
install package for Python 3 by: pip-3.2 install [package]
Why not just repoint the link /bin/python to python3? It seems like the easiest solution. Especially if you want it for all users of your system.