Develop Reference

Install PyQt5.15.4 from tar.gz file

I'm trying to install PyQt5.15.4 on a remote desktop that is not connected to internet (Anaconda distribution and PyCharm installed), hence I downloaded the tar.gz files from https://pypi.org/project/PyQt5/#files and tried to use this solution : Python import library from tar.gz? (it worked for other libraries I had to install such as python-docx). The problem is that there is no setup.py file. There is a configure.py file (I imagine it roughly do the same job), so I tried in cmd :
python configure.py install --prefix=<full path folder I used for other libraries I needed>
but I get:
Usage: python configure.py [opts] [name=value] [name+=value]
configure.py: error: no such option: --prefix
Do you have a tip ?

Download PyQT5 from here. https://www.riverbankcomputing.com/pypi/packages/PyQt5/PyQt5-5.15.5.dev2108100905.tar.gz#md5=b39c03d821123c37715daffb0c1c3bb1
This will download tar.gz fie. open the terminal, CD through the relative path, paste the command here.
pip install PyQt5-5.15.5.dev2108100905.tar.gz
if you have your own tar.gz. Then use the name of that file, which will install automatically.
pip install yourfile.tar.gz
Please let me know if that works

Manually installed python package but cannot import

I tried to install the keras_contrib package in a virtual machine which does not allow internet access. So I manually unzip the package, navigate to folder and using python setup.py install to install it. After that I can find the package using pip list, however when I import the package cannot be found. And I cannot find the package folder in the anaconda/lib/site-packages.
(link of the package: https://github.com/keras-team/keras-contrib)
These are the screenshots at the beginning and ending during installation.
Any suggestion? Thanks very much.

You should look at your $PYTHONPATH environment variables. If you are using Mac or Linux, write which python command on your terminal. Also, you can look at the link below for a setup that is similar to your problem
https://github.com/sparklingpandas/sparklingpandas/wiki/setup.py-Install-for-Anaconda-Python

How to move all modules to new version of Python (from 3.6 to 3.7)

I just upgraded to python 3.7 and I realized that all my modules stuck with the previous version. Even Django is not recognised anymore. How can I do to transfer everything to the new version? I am a little lost right now, don't even know where the new version has been installed.
Edit:
When I do $ which python3.6 the terminal tells me it doesn't exist, but I have a python3.6 directory in /usr/local/lib/, where all modules are installed.
In the same directory /usr/local/lib/ I also have a python3.7 directory with some modules installed but many are missing. However when I search for the file python3.7 in my finder it doesn't appear. when I do $ which python3.7 the path is /usr/local/bin so not the same path as the directory.
Anyone sees what happened and knows how I can transfer all modules to python3.7?

Even if the old python version has been removed, it is possible to use the pip of the current python version with the --path option to list all the modules installed in the previous version.
For example, migrating all my user installed python modules from 3.7 to 3.8
pip freeze --path ~/.local/lib/python3.7/site-packages > requirements.txt
pip install --user -r requirements.txt
Incidentally, I always use pip install with --user and leave the system wide installations to the package manager of my linux distro.

It is safer to re-install all packages due to possible compatibility issues:
pip3.6 list | awk '{print $1}' | xargs -I{} pip3.7 install {}

in older version of Python --run the command
pip freeze > requirements.txt
download and install newer version on python.. change the PATH variable to the new version
and run the command
pip install -r requirements.txt

I'm not sure about all modules...but if you want to install a module specifically in python3.7, try this:
python3.7 -m pip install *module_name*

In some cases, we don't have the opportunity to pip freeze in old version--because I've already updated and old version have been purged! There are some measures I've taken to recover some of the packages but I'm NOT sure every package would work with this fix.(e.g. the packages built with wheels)
mv /your/path/to/python3.{6,7}/site-packages/
If the case is packages installed outside venv (in /usr/local/ or ~/.local), reinstall pip with get-pip.py, just to be safe.
If you are recovering a virtualenv. Activate your virtualenv and use my script
Most of your packages should work by now. If anything malfunctions, pip reinstall would works. If you still want it 100% works, pip freeze now.😉

I have an alternative
(Not sure if works outside Windows 10)
I'm currently migrating from 3.7 to 3.8 and the way I found to re-install my previous libraries was by using a script I had that updates all packages via pip install. (Assuming you installed your new Python version as your main version) This checks for all the packages I had and updates/install them in the new Python version.
Note: I prefer to run the script from the command line
Use the file explorer to go to the folder where you have the script;
Click on the path box, write "cmd" and press enter to open a command line from the folder where you are;
Write "python name_of_your_script.py" and press enter to run the command.
The script (adapted from this solution):
import pkg_resources
from subprocess import call
packages = [dist.project_name for dist in pkg_resources.working_set]
[call("pip install " + name + " --upgrade") for name in packages]

I faced a similar problem, now that I upgraded from python 3.7 to python 3.8 (new)
I installed Python 3.8, but the system kept the python37 subfolder with the already installed packages(...\Python37-32\Lib\site-packages) even with the Pyhton38 subfolder created, with the new python.exe.
Usually, it's possible to keep on using the old libraries on your new Python version, because the existent libraries installation folder are already registered in your local computer system path (*).
Even though, I've had problems to use some libraries (some worked in Jupyter Notebook but not in Spyder). I tried the alternatives others proposed to migrate libraries but it did not worked (maybe I did not
So I used brutal force solution.. Not elegant at all, but it worked:
remove the OLD python version folders from the system path or even remove the folder itself for good..
Folders: C:\Users\USERNAME\AppData\Roaming\Python\Python37
C:\Users\USERNAME\AppData\Local\Programs\Python\Python37
Reinstall the packages you need, preferably via Anaconda prompt.
python -mpip install library_name
OR
pip install --user --force-reinstall package_name
OR
pip install --user --force-reinstall package_name == specify_package_version
The libraries will be installed at c:\users\USERNAME\anaconda3\lib\site-packages and recognized by your new python version.
(*) to add the folder to the PATH: System properties --> environment variables --> click "Path"--> edit --> add folder name)

Cannot open Gnome Terminal or install packages using pip without sudo in Ubuntu

I have been trying to install python packages and change the permissions of a folder using chmod. I can't remember which folder as it was just the one which the terminal said I did not have permissions for. I cannot even open it from x-term due to a python error(using python 2 print instead of 3?)
Since doing this I have been unable to open the gnome-terminal using the icon, the cursor becomes a laoding icon for a moment and then dissapears without opening the program.
I am also unable to use pip to install programs without using the program in sudo mode
Furthermore I cannot use the import command in python. Note that I have intalled scipy to my machine
Does anyone know what I have done and how I can revert it?

wrt to the import failing, pip installs modules into the /site-packages directory of your python directory. So I think the issue is that pip installed it in a different python directory than the directory that the system is using when you type python3. I would highly recommend using virtualenv when installing packages - this way you can keep your python executable as well as the dependencies all in one place. However, some packages are required to be installed in the system's python directory. wrt pip requiring you to use sudo, how did you install pip? Usually I do sudo apt-get install python3-pip

Installing Twitter Python Module

I am trying to install Twitter-Python and I am just not getting it. According to everything I've read this should be easy. I have read all that stuff about easy_install, python setup.py install, command lines, etc, but I just don't get it. I downloaded the "twitter-1.9.4.tar.gz", so I now have the 'twitter-1.9.4' folder in my root 'C:\Python27' and tried running
>>> python setup.py install
in IDLE... and that's not working. I was able to install a module for yahoo finance and all I had to do was put the code in my 'C:\Python27\Lib' folder.
How are these different and is there a REALLY BASIC step-by-step for installing packages?

1) Run CMD as administrator
2) Type this:
set path=%path%;C:\Python27\
3) Download python-twitter, if you haven't already did, this is the link I recommend:
https://code.google.com/p/python-twitter/
4) Download PeaZip in order to extract it:
http://peazip.org/
5) Install PeaZip, go to where you have downloaded python-twitter, right click, extract it with PeaZip.
6) Copy the link to the python-twitter folder after extraction, which should be something like this:
C:\Users\KiDo\Downloads\python-twitter-1.1.tar\dist\python-twitter-1.1
7) Go back to CMD, and type:
cd python-twitter location, or something like this:
cd C:\Users\KiDo\Downloads\python-twitter-1.1.tar\dist\python-twitter-1.1
8) Now type this in CMD:
python setup.py install
And it should work fine, to confirm it open IDLE, and type:
import twitter
Now you MAY get another error, like this:
>>> import twitter
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "C:\Python27\lib\site-packages\twitter.py", line 37, in <module>
import requests
ImportError: No module named requests
Then you have to do kinda same steps in order to download the module requests.

Looking at the directory structure you have, I am assuming that you are using Windows. So my recommendation is to use a package manager system such as pip. pip allows you to install python packages very easily.
You can install pip here:
pip for python
Or if you want the windows specific version, there are some pre built windows binaries here:
pip for windows
Doing python setup.py install in IDLE will not work because that is an interactive python interpreter. You would want to call python from the command line to install.
with pip, you can go to the command line and run something like this:
"pip install twitter-python"
Not all python packages are found with pip but you can search using
"pip search twitter-python"
The nature of pip is that you have to type out the exact name of the module that you want.
So in a nutshell, my personal recommendation to get python packages installed is:
Install pip executable
Go to the command line
Type "pip search python_package"
Find the package you want from the list.
Type "pip install python_package"
This should install everything without a hitch.

Installing Python Modules clearly states you need to install the packages from command line, not the Python interpreter IDE (like IDLE):
For Windows, this command should be run from a command prompt window
(Start ‣ Accessories):
setup.py install
You mention the python setup.py install command, which intends calling python interpreter already and wouldn't make sense to run within interpreter.

You need to set the Windows system path variables to include c:\Python27 and C:\Python27\Scripts.
You do not need to set PYTHONPATH nor use any bat files.
Path c:\Python27 will tell Windows where python.exe is
Path c:\Python27\Scripts will tell Windows where pip is
Run pip from Windows command line (do not use Idle)

Basically, with python3.4.3, you just have to do two things to be able to use twitter:
1.python -m pip install -U pip
then once pip is updated (as it comes preinstalled). you do the second step:
2. pip install twitter
this will install twitter package.

Today, after using pre method, I could not use it again (as per my post yesterday). So I tried another way that's simple and cool and hope would work always (on my pc at least):
...Python34>cd scripts #command prompt change die where pip is
...Python34\Scripts>pip install fabric #in this dir, use pip
Awesome (for me at least) although the package I wanted could not be 'perfectly' installed, yet another pythovery.