I'm trying to run the same pool three times so that it adds the values in the same list:
import multiprocessing
def foo(name,archive):
print('hello ', name)
archive.append(f"hello {name}")
def main():
max_process = multiprocessing.cpu_count()-1 or 1
pool = multiprocessing.Pool(max_process)
manager = multiprocessing.Manager()
archive = manager.list()
arguments = ['home','away','draw']
for _ in range(3):
[pool.apply_async(foo, args=[name,archive]) for name in arguments]
pool.close()
pool.join()
print(archive)
if __name__ == '__main__':
main()
The first batch runs perfectly, but when the second batch goes, this error appears:
ValueError: Pool not running
How should I proceed to generate this looping?
As indicated by Nullman in comments, the error was in keeping pool.close() and pool.join() inside the loop, bringing them out, worked perfectly:
import multiprocessing
def foo(name,archive):
print('hello ', name)
archive.append(f"hello {name}")
def main():
max_process = multiprocessing.cpu_count()-1 or 1
pool = multiprocessing.Pool(max_process)
manager = multiprocessing.Manager()
archive = manager.list()
arguments = ['home','away','draw']
for _ in range(3):
[pool.apply_async(foo, args=[name,archive]) for name in arguments]
pool.close()
pool.join()
print(archive)
if __name__ == '__main__':
main()
I am trying to play around with multiprocessing and I would like to communicate between Python's main thread and a subprocess with a Queue. Here is a quick test code I wrote that should get periodically some results generated by the subprocess:
from multiprocessing import Process, Queue
import time
def calculate(queue):
n = 0
while n < 10:
n += 1
queue.put(n)
time.sleep(1)
queue.put(0)
def queue_getter(queue):
executing = True
while executing:
while queue.qsize():
n = queue.get()
print(n)
if n == 0:
executing = False
time.sleep(0.1)
print('done')
queue = Queue()
p = Process(target=calculate, args=(queue,))
p.start()
queue_getter(queue)
p.join()
print('DONE')
This program just hangs forever, while replacing Process with threading.Thread gives the expected result:
1
2
3
4
5
6
7
8
9
10
0
done
DONE
How to make Process behave the same way as Thread in this situation?
Your program works fine on POSIX (UNIX-like) systems.
However, for it to work properly on ms-windows and macOS, you will need to put the program itself inside a main block, so the file can be imported without side effects.
This is due to the way multiprocessing has to work on ms-windows and macOS. Read the programming guidelines for multiprocessing.
Modify your code like this:
from multiprocessing import Process, Queue
import time
def calculate(queue):
n = 0
while n < 10:
n += 1
queue.put(n)
time.sleep(1)
queue.put(0)
def queue_getter(queue):
executing = True
while executing:
while queue.qsize():
n = queue.get()
print(n)
if n == 0:
executing = False
time.sleep(0.1)
print("done")
if __name__ == "__main__":
queue = Queue()
p = Process(target=calculate, args=(queue,))
p.start()
queue_getter(queue)
p.join()
print("DONE")
Here's a simplified and more robust approach which is (almost) functionally identical to the OP's original except that is does not print the zero:
from multiprocessing import Manager
from concurrent.futures import ProcessPoolExecutor
import time
def calculate(q):
for n in range(1, 11):
q.put(n)
time.sleep(1)
q.put(0)
def queue_getter(q):
while (n := q.get()):
print(n)
def main():
with Manager() as manager:
q = manager.Queue()
with ProcessPoolExecutor() as executor:
executor.submit(calculate, q)
queue_getter(q)
if __name__ == '__main__':
main()
In the example code below, I'd like to get the return value of the function worker. How can I go about doing this? Where is this value stored?
Example Code:
import multiprocessing
def worker(procnum):
'''worker function'''
print str(procnum) + ' represent!'
return procnum
if __name__ == '__main__':
jobs = []
for i in range(5):
p = multiprocessing.Process(target=worker, args=(i,))
jobs.append(p)
p.start()
for proc in jobs:
proc.join()
print jobs
Output:
0 represent!
1 represent!
2 represent!
3 represent!
4 represent!
[<Process(Process-1, stopped)>, <Process(Process-2, stopped)>, <Process(Process-3, stopped)>, <Process(Process-4, stopped)>, <Process(Process-5, stopped)>]
I can't seem to find the relevant attribute in the objects stored in jobs.
Use shared variable to communicate. For example like this:
import multiprocessing
def worker(procnum, return_dict):
"""worker function"""
print(str(procnum) + " represent!")
return_dict[procnum] = procnum
if __name__ == "__main__":
manager = multiprocessing.Manager()
return_dict = manager.dict()
jobs = []
for i in range(5):
p = multiprocessing.Process(target=worker, args=(i, return_dict))
jobs.append(p)
p.start()
for proc in jobs:
proc.join()
print(return_dict.values())
I think the approach suggested by #sega_sai is the better one. But it really needs a code example, so here goes:
import multiprocessing
from os import getpid
def worker(procnum):
print('I am number %d in process %d' % (procnum, getpid()))
return getpid()
if __name__ == '__main__':
pool = multiprocessing.Pool(processes = 3)
print(pool.map(worker, range(5)))
Which will print the return values:
I am number 0 in process 19139
I am number 1 in process 19138
I am number 2 in process 19140
I am number 3 in process 19139
I am number 4 in process 19140
[19139, 19138, 19140, 19139, 19140]
If you are familiar with map (the Python 2 built-in) this should not be too challenging. Otherwise have a look at sega_Sai's link.
Note how little code is needed. (Also note how processes are re-used).
For anyone else who is seeking how to get a value from a Process using Queue:
import multiprocessing
ret = {'foo': False}
def worker(queue):
ret = queue.get()
ret['foo'] = True
queue.put(ret)
if __name__ == '__main__':
queue = multiprocessing.Queue()
queue.put(ret)
p = multiprocessing.Process(target=worker, args=(queue,))
p.start()
p.join()
print(queue.get()) # Prints {"foo": True}
Note that in Windows or Jupyter Notebook, with multithreading you have to save this as a file and execute the file. If you do it in a command prompt you will see an error like this:
AttributeError: Can't get attribute 'worker' on <module '__main__' (built-in)>
For some reason, I couldn't find a general example of how to do this with Queue anywhere (even Python's doc examples don't spawn multiple processes), so here's what I got working after like 10 tries:
from multiprocessing import Process, Queue
def add_helper(queue, arg1, arg2): # the func called in child processes
ret = arg1 + arg2
queue.put(ret)
def multi_add(): # spawns child processes
q = Queue()
processes = []
rets = []
for _ in range(0, 100):
p = Process(target=add_helper, args=(q, 1, 2))
processes.append(p)
p.start()
for p in processes:
ret = q.get() # will block
rets.append(ret)
for p in processes:
p.join()
return rets
Queue is a blocking, thread-safe queue that you can use to store the return values from the child processes. So you have to pass the queue to each process. Something less obvious here is that you have to get() from the queue before you join the Processes or else the queue fills up and blocks everything.
Update for those who are object-oriented (tested in Python 3.4):
from multiprocessing import Process, Queue
class Multiprocessor():
def __init__(self):
self.processes = []
self.queue = Queue()
#staticmethod
def _wrapper(func, queue, args, kwargs):
ret = func(*args, **kwargs)
queue.put(ret)
def run(self, func, *args, **kwargs):
args2 = [func, self.queue, args, kwargs]
p = Process(target=self._wrapper, args=args2)
self.processes.append(p)
p.start()
def wait(self):
rets = []
for p in self.processes:
ret = self.queue.get()
rets.append(ret)
for p in self.processes:
p.join()
return rets
# tester
if __name__ == "__main__":
mp = Multiprocessor()
num_proc = 64
for _ in range(num_proc): # queue up multiple tasks running `sum`
mp.run(sum, [1, 2, 3, 4, 5])
ret = mp.wait() # get all results
print(ret)
assert len(ret) == num_proc and all(r == 15 for r in ret)
This example shows how to use a list of multiprocessing.Pipe instances to return strings from an arbitrary number of processes:
import multiprocessing
def worker(procnum, send_end):
'''worker function'''
result = str(procnum) + ' represent!'
print result
send_end.send(result)
def main():
jobs = []
pipe_list = []
for i in range(5):
recv_end, send_end = multiprocessing.Pipe(False)
p = multiprocessing.Process(target=worker, args=(i, send_end))
jobs.append(p)
pipe_list.append(recv_end)
p.start()
for proc in jobs:
proc.join()
result_list = [x.recv() for x in pipe_list]
print result_list
if __name__ == '__main__':
main()
Output:
0 represent!
1 represent!
2 represent!
3 represent!
4 represent!
['0 represent!', '1 represent!', '2 represent!', '3 represent!', '4 represent!']
This solution uses fewer resources than a multiprocessing.Queue which uses
a Pipe
at least one Lock
a buffer
a thread
or a multiprocessing.SimpleQueue which uses
a Pipe
at least one Lock
It is very instructive to look at the source for each of these types.
It seems that you should use the multiprocessing.Pool class instead and use the methods .apply() .apply_async(), map()
http://docs.python.org/library/multiprocessing.html?highlight=pool#multiprocessing.pool.AsyncResult
You can use the exit built-in to set the exit code of a process. It can be obtained from the exitcode attribute of the process:
import multiprocessing
def worker(procnum):
print str(procnum) + ' represent!'
exit(procnum)
if __name__ == '__main__':
jobs = []
for i in range(5):
p = multiprocessing.Process(target=worker, args=(i,))
jobs.append(p)
p.start()
result = []
for proc in jobs:
proc.join()
result.append(proc.exitcode)
print result
Output:
0 represent!
1 represent!
2 represent!
3 represent!
4 represent!
[0, 1, 2, 3, 4]
The pebble package has a nice abstraction leveraging multiprocessing.Pipe which makes this quite straightforward:
from pebble import concurrent
#concurrent.process
def function(arg, kwarg=0):
return arg + kwarg
future = function(1, kwarg=1)
print(future.result())
Example from: https://pythonhosted.org/Pebble/#concurrent-decorators
Thought I'd simplify the simplest examples copied from above, working for me on Py3.6. Simplest is multiprocessing.Pool:
import multiprocessing
import time
def worker(x):
time.sleep(1)
return x
pool = multiprocessing.Pool()
print(pool.map(worker, range(10)))
You can set the number of processes in the pool with, e.g., Pool(processes=5). However it defaults to CPU count, so leave it blank for CPU-bound tasks. (I/O-bound tasks often suit threads anyway, as the threads are mostly waiting so can share a CPU core.) Pool also applies chunking optimization.
(Note that the worker method cannot be nested within a method. I initially defined my worker method inside the method that makes the call to pool.map, to keep it all self-contained, but then the processes couldn't import it, and threw "AttributeError: Can't pickle local object outer_method..inner_method". More here. It can be inside a class.)
(Appreciate the original question specified printing 'represent!' rather than time.sleep(), but without it I thought some code was running concurrently when it wasn't.)
Py3's ProcessPoolExecutor is also two lines (.map returns a generator so you need the list()):
from concurrent.futures import ProcessPoolExecutor
with ProcessPoolExecutor() as executor:
print(list(executor.map(worker, range(10))))
With plain Processes:
import multiprocessing
import time
def worker(x, queue):
time.sleep(1)
queue.put(x)
queue = multiprocessing.SimpleQueue()
tasks = range(10)
for task in tasks:
multiprocessing.Process(target=worker, args=(task, queue,)).start()
for _ in tasks:
print(queue.get())
Use SimpleQueue if all you need is put and get. The first loop starts all the processes, before the second makes the blocking queue.get calls. I don't think there's any reason to call p.join() too.
If you are using Python 3, you can use concurrent.futures.ProcessPoolExecutor as a convenient abstraction:
from concurrent.futures import ProcessPoolExecutor
def worker(procnum):
'''worker function'''
print(str(procnum) + ' represent!')
return procnum
if __name__ == '__main__':
with ProcessPoolExecutor() as executor:
print(list(executor.map(worker, range(5))))
Output:
0 represent!
1 represent!
2 represent!
3 represent!
4 represent!
[0, 1, 2, 3, 4]
A simple solution:
import multiprocessing
output=[]
data = range(0,10)
def f(x):
return x**2
def handler():
p = multiprocessing.Pool(64)
r=p.map(f, data)
return r
if __name__ == '__main__':
output.append(handler())
print(output[0])
Output:
[0, 1, 4, 9, 16, 25, 36, 49, 64, 81]
You can use ProcessPoolExecutor to get a return value from a function as shown below:
from concurrent.futures import ProcessPoolExecutor
def test(num1, num2):
return num1 + num2
with ProcessPoolExecutor() as executor:
feature = executor.submit(test, 2, 3)
print(feature.result()) # 5
I modified vartec's answer a bit since I needed to get the error codes from the function. (Thanks vertec!!! its an awesome trick)
This can also be done with a manager.list but I think is better to have it in a dict and store a list within it. That way, way we keep the function and the results since we can't be sure of the order in which the list will be populated.
from multiprocessing import Process
import time
import datetime
import multiprocessing
def func1(fn, m_list):
print 'func1: starting'
time.sleep(1)
m_list[fn] = "this is the first function"
print 'func1: finishing'
# return "func1" # no need for return since Multiprocess doesnt return it =(
def func2(fn, m_list):
print 'func2: starting'
time.sleep(3)
m_list[fn] = "this is function 2"
print 'func2: finishing'
# return "func2"
def func3(fn, m_list):
print 'func3: starting'
time.sleep(9)
# if fail wont join the rest because it never populate the dict
# or do a try/except to get something in return.
raise ValueError("failed here")
# if we want to get the error in the manager dict we can catch the error
try:
raise ValueError("failed here")
m_list[fn] = "this is third"
except:
m_list[fn] = "this is third and it fail horrible"
# print 'func3: finishing'
# return "func3"
def runInParallel(*fns): # * is to accept any input in list
start_time = datetime.datetime.now()
proc = []
manager = multiprocessing.Manager()
m_list = manager.dict()
for fn in fns:
# print fn
# print dir(fn)
p = Process(target=fn, name=fn.func_name, args=(fn, m_list))
p.start()
proc.append(p)
for p in proc:
p.join() # 5 is the time out
print datetime.datetime.now() - start_time
return m_list, proc
if __name__ == '__main__':
manager, proc = runInParallel(func1, func2, func3)
# print dir(proc[0])
# print proc[0]._name
# print proc[0].name
# print proc[0].exitcode
# here you can check what did fail
for i in proc:
print i.name, i.exitcode # name was set up in the Process line 53
# here will only show the function that worked and where able to populate the
# manager dict
for i, j in manager.items():
print dir(i) # things you can do to the function
print i, j
I can't figure out what's wrong with the following python multiprocessing code. It does not terminate. Any suggestions will be highly appreciated.
from multiprocessing import Process, Queue, Lock
def hello(num, myqueue):
while True:
item = myqueue.get()
print 'Thread ', num, 'got', item
return
def put_on_queue(myqueue):
for i in range(10):
myqueue.put(i)
return
if __name__ == '__main__':
processes = []
myqueue = Queue()
for i in range(4):
proc = Process(target = hello, args = (i, myqueue))
proc.start()
processes.append(proc)
put_on_queue(myqueue)
for proc in processes:
proc.join()
-------------- EDIT -----------------
OK, so based on the comments I received, and some online help I revised my code as below. Still no luck :-(
def hello(num, myqueue):
while not exit_flag:
item = myqueue.get(False,5)
print 'Thread ', num, 'got', item
return
def put_on_queue(myqueue):
global exit_flag
for i in range(10):
myqueue.put(i)
while not myqueue.empty():
pass
exit_flag = 1
return
if __name__ == '__main__':
mylock = Lock()
processes = []
myqueue = Queue()
exit_flag = 0
for i in range(4):
proc = Process(target = hello, args = (i, myqueue))
#proc.daemon = True
proc.start()
processes.append(proc)
put_on_queue(myqueue)
for proc in processes:
proc.join()
There's an infinite loop inside your hello function.
You have to put a sentinent as a last value into the queue, check for it and break out of the loop.