I run sudo pip install git-review, and get the following messages:
Downloading/unpacking git-review
Cannot fetch index base URL http://pypi.python.org/simple/
Could not find any downloads that satisfy the requirement git-review
No distributions at all found for git-review
Storing complete log in /home/sai/.pip/pip.log
Does anyone has any idea about this?
I know this is an old thread, but I encountered this issue today and wanted to share my solution to the problem because I haven't seen this solution elsewhere on SO.
My environment: Python 2.7.12/2.7.14 on Ubuntu 12.04.5 LTS in a virtualenv, pip version 1.1.
My Errors:
pip install nose
in console:
Cannot fetch index base URL http://pypi.python.org/simple/
in ~/.pip/pip.log:
Could not fetch URL http://pypi.python.org/simple/: HTTP Error 403: SSL is required
Curious for me because I had been running these same commands in a script without issue for about a year.
this fixed it:
pip install --index-url=https://pypi.python.org/simple/ nose
(note the https)
You need to upgrade your pip installation because it is still using http instead of https.
The --index-url (short version: -i) option allows you to specify an index-url in the call to pip itself, there you can use the https-variant. Then you can instruct pip to upgrade itself.
sudo pip install --index-url https://pypi.python.org/simple/ --upgrade pip
Afterwards you should be able to use pip without the --index-url option.
I believe that the release 7.0.0 (2015-05-21) triggered this issue. The release note for that version states the following:
BACKWARD INCOMPATIBLE No longer implicitly support an insecure origin
origin, and instead require insecure origins be explicitly trusted
with the --trusted-host option.
You can check your pip version with pip --version.
This would mean that issuing sudo pip install --trusted-host --upgrade pip once would also solve this issue, albeit download pip over insecure http. This might also not work at all, because it is possible that the insecure endpoint is no longer accessible on the server (I have not tested this).
EDIT:
The current version of PIP no longer has this issue. As of right now, version: 7.1.2 is the current version. Here is the PIP link:
https://pypi.python.org/pypi/pip
ORIGINAL FIX:
I got this issue when trying to use pip==1.5.4
This is an issue related to PIP and Python's PYPI trusting SSL certificates. If you look in the PIP log in Mac OS X at: /Users/username/.pip/pip.log it will give you more detail.
My workaround to get PIP back up and running after hours of trying different stuff was to go into my site-packages in Python whether it is in a virtualenv or in your normal site-packages, and get rid of the current PIP version. For me I had pip==1.5.4
I deleted the PIP directory and the PIP egg file. Then I ran
easy_install pip==1.2.1
This version of PIP doesn't have the SSL issue, and then I was able to go and run my normal pip install -r requirements.txt within my virtualenv to set up all packages that I wanted that were listed in my requirements.txt file.
This is also the recommended hack to get passed the issue by several people on this Google Group that I found:
https://groups.google.com/forum/#!topic/beagleboard/aSlPCNYcVjw
I added --proxy command line option to point to the proxy and it's working (pip version is 1.5.4 and python 2.7). for some reason it was not taking the shell env variables HTTPS_PROXY, HTTP_PROXY, https_proxy, http_proxy.
sudo pip --proxy [user:passwd#]proxy.server:port install git-review
Check your proxy connection, I had a similar issue, then I changed my connection which wasn't proxied and boom, of it started downloading and setting up the library
I had the same issue with pip 1.5.6.
I just deleted the ~/.pip folder and it worked like a charm.
rm -r ~/.pip/
I had the same problem with pip==1.5.6. I had to correct my system time.
# date -s "2014-12-09 10:09:50"
This worked for me on Ubuntu 12.04.
pip install --index-url=https://pypi.python.org/simple/ -U scikit-learn
If that's not a proxy/network problem you should try to create/edit config file .pip/pip.conf or if you are running pip as root /root/.pip/pip.conf. Check and change index-url from http to https.
It should be like this:
[global]
index-url=https://pypi.python.org/simple/
Worked for me with Ubuntu 12 and pip 9.0.1
it works!
sudo pip --proxy=http://202.194.64.89:8000 install elasticsearch ;
202.194.64.89:8000 is my PROXY,
In my case (Python 3.4, in a virtual environment, running under macOS 10.10.6) I could not even upgrade pip itself. Help came from this SO answer in the form of the following one-liner:
curl https://bootstrap.pypa.io/get-pip.py | python
(If you do not use a virtual environment, you may need sudo python.)
With this I managed to upgrade pip from Version 1.5.6 to Version 10.0.0 (quite a jump!). This version does not use TLS 1.0 or 1.1 which are not supported any more by the Python.org site(s), and can install PyPI packages nicely. No need to specify --index-url=https://pypi.python.org/simple/.
I was able to fix this by upgrading my python, which had previously been attached to an outdated version of OpenSSL. Now it is using 1.0.1h-1 and my package will pip install.
FYI, my log and commands, using anaconda and installing the pytest-ipynb package [1] :
$ conda update python
Fetching package metadata: ....
Solving package specifications: .
Package plan for installation in environment /Users/me/anaconda/envs/py27:
The following NEW packages will be INSTALLED:
openssl: 1.0.1h-1
The following packages will be UPDATED:
python: 2.7.5-3 --> 2.7.8-1
readline: 6.2-1 --> 6.2-2
sqlite: 3.7.13-1 --> 3.8.4.1-0
tk: 8.5.13-1 --> 8.5.15-0
Proceed ([y]/n)? y
Unlinking packages ...
[ COMPLETE ] |#############################################################| 100%
Linking packages ...
[ COMPLETE ] |#############################################################| 100%
$ pip install pytest-ipynb
Downloading/unpacking pytest-ipynb
Downloading pytest-ipynb-0.1.1.tar.gz
Running setup.py (path:/private/var/folders/4f/b8gwyhg905x94twqw2pbklyw0000gn/T/pip_build_me/pytest-ipynb/setup.py) egg_info for package pytest-ipynb
Requirement already satisfied (use --upgrade to upgrade): pytest in /Users/me/anaconda/envs/py27/lib/python2.7/site-packages (from pytest-ipynb)
Installing collected packages: pytest-ipynb
Running setup.py install for pytest-ipynb
Successfully installed pytest-ipynb
Cleaning up...
[1] My ticket about this issue; https://github.com/zonca/pytest-ipynb/issues/1
I faced same problem but that was related proxy. it was resolved by setting proxy.
Set http_proxy=http://myuserid:mypassword#myproxyname:myproxyport
Set https_proxy=http://myuserid:mypassword#myproxyname:myproxyport
This might help someone.
If your proxy is configured correctly, then pip version 1.5.6 will handle this correctly. The bug was resolved.
You can upgrade pip with easy_install pip==1.5.6
Extra answer: if you are doing this from chroot.
You need source of random numbers to be able to establish secure connection to pypi.
On linux, you can bind-mount host dev to chroot dev:
mount --bind /dev /path-to-chroot/dev
I also got this error while installing pyinstaller in a proxied connection. I just connect direct Internet connection(Using my dongle) and did that again.
sudo pip install pyinstaller
This worked for me.
You might be missing a DNS server conf in /etc/resolv.conf
make sure u can ping to:
ping pypi.python.org
if you're not getting a ping try to add a DNS server to file...something like:
nameserver xxx.xxx.xxx.xxx
My explanation/enquiry is for windows environment.
I am pretty new to python, and this is for someone still novice than me.
I installed the latest pip(python installer package) and downloaded 32 bit/64 bit (open source) compatible binaries from http://www.lfd.uci.edu/~gohlke/pythonlibs/, and it worked.
Steps followed to install pip, though usually pip is installed by default during python installation from www.python.org/downloads/
- Download pip-7.1.0.tar.gz from https://pypi.python.org/pypi/pip.
- Unzip and un-tar the above file.
- In the pip-7.1.0 folder, run: python setup.py install. This installed pip latest version.
Use pip to install(any feasible operation) binary package.
Run the pip app to do the work(install file), as below:
\python27\scripts\pip2.7.exe install file_path\file_name --proxy
If you face, wheel(i.e egg) issue, use the compatible binary package file.
Hope this helps.
in my case I would install django (
pip install django
)
and it has a same problem with ssl certificate (Cannot fetch index base URL http://pypi.python.org/simple/ )
it's from virtualenv so DO :
FIRST:
delete your virtualenv
deactivate
rm -rf env
SECOND:
check have pip
pip3 -V
if you don't have
sudo apt-get install python3-pip
FINALLY:
install virtualenv with nosite-packages
and make your virenviroment
sudo pip3 install virtualenv
virtualenv --no-site-packages -p /usr/bin/python3.6
. env/bin/activate
Check ~/.pip/pip.log
It could contain the error message
Could not fetch URL https://pypi.python.org/simple/pip/: 403 Client Error: [[[!!! BREAKING CHANGE !!!]]] Support for clients that do not support Server Name Indication is temporarily disabled and will be permanently deprecated soon. See https://status.python.org/incidents/hzmjhqsdjqgb and https://github.com/pypa/pypi-support/issues/978 [[[!!! END BREAKING CHANGE !!!]]]
If so, the fix is to upgrade to that last version of Python 2.7. See https://github.com/pypa/pypi-support/issues/978
In my case I could do that with add-apt-repository ppa:fkrull/deadsnakes-python2.7 && apt-get update && apt-get upgrade but YMMV may vary depending on distribution.
I had a similar problem, but in my case I was getting the error:
Downloading/unpacking bencode
Cannot fetch index base URL http://c.pypi.python.org/simple/
Could not find any downloads that satisfy the requirement bencode
No distributions at all found for bencode
Storing complete log in /home/andrew/.pip/pip.log
In my case I was able to fix the error by editing ~/.pip/pip.conf and changing http://c.pypi.python.org/simple/ to http://pypi.python.org/simple and then pip worked fine again.
I got this error message in ~/.pip/pip.log
Could not fetch URL https://pypi.python.org/simple/: connection error: [Errno 185090050] _ssl.c:344: error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib
Will skip URL https://pypi.python.org/simple/ when looking for download links for regulargrid
I fixed it by updating my ~/.pip/pip.conf. It accidentally pointed to cacert.pem file that did not exist and looked like this
[global]
cert = /some/path/.pip/cacert.pem
I used to use the easy_install pip==1.2.1 workaround but I randomly found that if you're having this bug, you probably installed a 32bit version of python.
If you install a 64bit version of it by installing it from the source and then build you virtualenv upon it, you wont have that pip bug anymore.
I too used the chosen solution (downgrading pip) to work around this issue until I ran into another seemingly unrelated issue caused by the same underlying problem. Python's version of OpenSSL was out of date. Check your OpenSSL version:
python -c 'import ssl; print(ssl.OPENSSL_VERSION)'
If the version is 0.9.7, that should verify that OpenSSL needs to be updated. If you know how to do that directly, great (but please let me know in a comment). If not, you can follow the advice in this answer, and reinstall python from the 64 bit/32 bit installer instead of the 32 bit only installer from python.org (I'm using python 3.4.2). I now have OpenSSL version 0.9.8, and none of these issues.
Try doing reinstallation of pip :
curl -O https://pypi.python.org/packages/source/p/pip/pip-1.2.1.tar.gz
tar xvfz pip-1.2.1.tar.gz
cd pip-1.2.1
python setup.py install
If curl doesnot work , you will have proxy issues , Please fix that it should work fine. Check after opening google.com in your browser in linux.
The try installing
pip install virtualenv
In case you use a firewall, make sure outbound connections to port 443 are not blocked, e.g. run:
sudo iptables -A OUTPUT -p tcp --dport 443 -j ACCEPT
I have met the same questions with you. When I realize it may be caused by unmatched version of numpy or pip, I uninstalled numpy and pip, then continue as this 'https://radimrehurek.com/gensim/install.html', at last I succeed!
C:\Users\Asus>pip install matplotlib
Downloading/unpacking matplotlib
Cannot fetch index base URL https://pypi.python.org/simple/
Could not find any downloads that satisfy the requirement matplotlib
Cleaning up...
No distributions at all found for matplotlib
Storing debug log for failure in C:\Users\Asus\pip\pip.log
I used 'easy_install pip==1.2.1' and it worked fine.
C:\Users\Asus>easy_install pip==1.2.1
Searching for pip==1.2.1
Reading https://pypi.python.org/simple/pip/
Best match: pip 1.2.1
Downloading ...
Then on using this command 'pip install matplotlib'
C:\Users\Asus>pip install matplotlib
Downloading/unpacking matplotlib
Downloading matplotlib-2.0.0b4.tar.gz (unknown size):
If you're running these commands in a Docker container on Windows, it may mean that your docker machine's network connection is stale and needs to be rebuilt. To fix it, run these commands:
docker-machine stop
docker-machine start
#FOR /f "tokens=*" %i IN ('docker-machine env') DO #%i
I'm now getting this in $HOME/.pip/pip.log:
Could not fetch URL https://pypi.python.org/simple/: HTTP Error 403: TLSv1.2+ is required
I don't have a straightforward solution for this, but I'm mentioning it as something to watch out for before you waste time on trying some of the other solutions here.
I'm obviously already using a https URL
There is no proxy or firewall issue
Using trusted-host didn't change anything (dunno where I picked this up)
For what it's worth my openssl is too old to even have ssl.OPENSSL_VERSION so maybe that's really the explanation here.
In the end, wiping my virtual environment and recreating it with virtualenv --setuptools env seems to have fixed at least the major blockers.
This is on a really old Debian box, Python 2.6.6.
Goal: I'm on RedHat 5 and trying to install the latest python and django for a web app.
I successfully altinstalled python27 and easy_install, and wget with openssl.
Problem: However now that I try to get anything from pypi.python.org I get the following error:
$ sudo easy_install --verbose django
Searching for django
Reading https://pypi.python.org/simple/django/
Download error on https://pypi.python.org/simple/django/: [Errno 1] _ssl.c:507: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed -- Some packages may not be found!
Couldn't find index page for 'django' (maybe misspelled?)
Scanning index of all packages (this may take a while)
Reading https://pypi.python.org/simple/
Download error on https://pypi.python.org/simple/: [Errno 1] _ssl.c:507: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed -- Some packages may not be found!
No local packages or download links found for django
error: Could not find suitable distribution for Requirement.parse('django')
I tried looking up the certificate of pypi.python.org with openssl s_client -showcert -connect but don't know what to do with it, where to store it. Not much info on google, need expert help.
Thank you!
edit: I meant wget* with openssl.
$ wget http://ftp.gnu.org/gnu/wget/wget-1.15.tar.gz
$ tar -xzf wget-1.15.tar.gz
$ cd wget-1.15
$ ./configure --with-ssl=openssl
$ make
$ sudo make install
I can't get wget to pull the page either:
$ wget https://pypi.python.org/simple/django/
--2014-01-21 11:18:45-- https://pypi.python.org/simple/django/
Resolving pypi.python.org (pypi.python.org)... 199.27.73.185, 199.27.74.184
Connecting to pypi.python.org (pypi.python.org)|199.27.73.185|:443... connected.
ERROR: cannot verify pypi.python.org's certificate, issued by ‘/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance CA-3’:
Unable to locally verify the issuer's authority.
To connect to pypi.python.org insecurely, use `--no-check-certificate'.
your curl cert is too old try to download new curl cert:
sudo wget http://curl.haxx.se/ca/cacert.pem -O /etc/pki/tls/certs/ca-bundle.crt
I found this page after looking for a solution to this problem. In case someone else has similar problem, the solution I found is:
At the start of the setuptools/ssl_support.py file (which is used by easy_install, and is inside the egg file: ./lib/python2.7/site-packages/setuptools-3.5.1-py2.7.egg), the certificate bundles files are hard-coded in cert_paths variable:
cert_paths = """
/etc/pki/tls/certs/ca-bundle.crt
/etc/ssl/certs/ca-certificates.crt
/usr/share/ssl/certs/ca-bundle.crt
/usr/local/share/certs/ca-root.crt
...etc..
"""
easy_install will use the first file that exists from this list, as it calls find_ca_bundle. If certificates in this cert bundle file are out of date, then easy_install will fail with this SSL error. So need to either update the certificate file or change the cert_paths in this ssl_support.py file, to point to a local up-to-date certs bundle file.
I have seen this problem in a specific environment: Mac OS X with macports, installing packages in user's local path. The solution was to install the certificates from curl:
port install curl-ca-bundle
Btw, until you don't have the ceritificates, most of the port, easy_install and pip commands will fail because the ssl error.
Try installing pip to do python package installation instead.
You can find the documentation to quick install it and use it here. It's generally a lot better than easy_install.
It also uses SSL by default, and with Requests' certificate stack (derived from mozilla).
You can also find a lot of information on working with python packages in general on the Python Packaging User Guide.