Related
So let's say I have a vector of numbers.
np.random.randn(5).round(2).tolist()
[2.05, -1.57, 1.07, 1.37, 0.32]
I want a draw a rectangle that shows this elements as numbers in a rectangle.
Something like this:
Is there an easy way to do this in matplotlib?
A bit convoluted but you could take advantage of seaborn.heatmap, creating a white colormap:
import seaborn as sns
import numpy as np
import matplotlib.pyplot as plt
from matplotlib.colors import LinearSegmentedColormap
data = np.random.randn(5).round(2).tolist()
linewidth = 2
ax = sns.heatmap([data], annot=True, cmap=LinearSegmentedColormap.from_list('', ['w', 'w'], N=1),
linewidths=linewidth, linecolor='black', square=True,
cbar=False, xticklabels=False, yticklabels=False)
plt.tight_layout()
plt.show()
In this case, the external lines won't be as thick as the internal ones. If needed, this can be fixed with:
ax.axhline(y=0, color='black', lw=linewidth*2)
ax.axhline(y=1, color='black', lw=linewidth*2)
ax.axvline(x=0, color='black', lw=linewidth*2)
ax.axvline(x=len(data), color='black', lw=linewidth*2)
Edit: avoid these lines and add clip_on=False to sns.heatmap (thanks/credit #JohanC)
Output:
We can add rectangles , and annotate them in a for loop.
from matplotlib import pyplot as plt
import numpy as np
# Our numbers
nums = np.random.randn(5).round(2).tolist()
# rectangle_size
rectangle_size = 2
# We want rectangles look squared, you can change if you want
plt.rcParams["figure.figsize"] = [rectangle_size * len(nums), rectangle_size]
plt.rcParams["figure.autolayout"] = True
fig = plt.figure()
ax = fig.add_subplot(111)
for i in range(len(nums)):
# We are adding rectangles
# You can change colors as you wish
plt.broken_barh([(rectangle_size * i, rectangle_size)], (0, rectangle_size), facecolors='white', edgecolor='black'
,linewidth = 1)
# We are calculating where to annotate numbers
cy = rectangle_size / 2.0
cx = rectangle_size * i + cy
# Annotation You can change color,font, etc ..
ax.annotate(str(nums[i]), (cx, cy), color='black', weight='bold', fontsize=20, ha='center', va='center')
# For squared look
plt.xlim([0, rectangle_size*len(nums)])
plt.ylim([0, rectangle_size])
# We dont want to show ticks
plt.axis('off')
plt.show()
One way using the Rectangle patch is:
import numpy as np
from matplotlib import pyplot as plt
from matplotlib.patches import Rectangle
x = np.random.randn(5).round(2).tolist()
fig, ax = plt.subplots(figsize=(9, 2)) # make figure
dx = 0.15 # edge size of box
buf = dx / 10 # buffer around edges
# set x and y limits
ax.set_xlim([0 - buf, len(x) * dx + buf])
ax.set_ylim([0 - buf, dx + buf])
# set axes as equal and turn off axis lines
ax.set_aspect("equal")
ax.axis("off")
# draw plot
for i in range(len(x)):
# create rectangle with linewidth=4
rect = Rectangle((dx * i, 0), dx, dx, facecolor="none", edgecolor="black", lw=4)
ax.add_patch(rect)
# get text position
x0, y0 = dx * i + dx / 2, dx / 2
# add text
ax.text(
x0, y0, f"{x[i]}", color="black", ha="center", va="center", fontsize=28, fontweight="bold"
)
fig.tight_layout()
fig.show()
which gives:
When I make figure with 5 subplots and annotate the bars in each subplot, matplotlib appears to scale the figure so that the maximum from the largest y-axis scales to the smallest y-axis.
I can't describe the problem too well, but see this image:
where there's tons of white-space above where the figure should begin.
However, the figure would ideally look like this
When I set the 4 smallest axes to have the same upper y-limit as the largest axis, then the figure scales correctly, but for the purpose of the visualization, I would prefer not to do that.
Why does this happen? Is there anyway to control the figure so that it's not automatically scaled as in the first image? Or otherwise, a more appropriate way of plotting what I hope to achieve?
The code I'm using to generate the figure:
import numpy as np
from matplotlib import pyplot as plt
from matplotlib.patches import Patch
from matplotlib import rcParams
rcParams['font.family'] = 'sans-serif'
rcParams['font.sans-serif'] = ['Arial']
department = ["100", "1,000", "10,000", \
"100,000", "1,000,000"]
quarter = ["Serial", "MPI", "CUDA", "Hybrid"]
budgets = np.array([[0.049979, 0.43584, 2.787366, 19.75062, 201.6935],\
[2.184624, 0.175213, 0.677837, 5.265575, 46.33678],\
[0.050294, 0.068537, 0.23739, 1.93778, 18.55734],\
[3.714284, 3.9917, 4.977599, 6.174967, 37.732232]])
budgets = np.transpose(budgets)
em = np.zeros((len(department), len(quarter)))
# set up barchart
x = np.arange(len(department)) # label locations
width = 0.8 # width of all the bars
# set up figure
fig, (ax1, ax2, ax3, ax4, ax5) = plt.subplots(1, 5)
axes = [ax1, ax2, ax3, ax4, ax5]
# generate bars
rects = []
color = ["tomato", "royalblue", "limegreen", "orange"]
n = len(quarter)
for i in range(n):
bar_x = x - width/2.0 + i/float(n)*width + width/(n*2)
m = len(budgets[:,i])
for j in range(m):
bar_x = x[j] - width/2.0 + i/float(n)*width + width/(n*2)
e = budgets[j,i]
#bar_x = x - width/2.0 + i/float(n)*width + width/(n*2)
rects.append(axes[j].bar(bar_x, e, width=width/float(n), \
label=quarter[i], color=color[i]))
# set figure properties
fig.set_size_inches(12, 2.5)
fig.tight_layout(rect=[0, 0.03, 1, 0.95])
nAx = len(axes)
for i in range(nAx):
#axes[i].set_aspect("auto")
axes[i].tick_params(axis='x', which='both', bottom=False, top=False,
labelbottom=False)
ax1.set_ylabel("Time (ms)")
for i in range(nAx):
axes[i].yaxis.grid(which="major", color="white", lw=0.75)
ax1.set_ylim([0, 4])
fig.suptitle("Time per iteration for differing dataset sizes") # title
for i in range(nAx):
axes[i].set_xlabel(department[i])
# annotate bars
for i in range(nAx):
for rect in rects:
j = 0;
for bar in rect:
y_bottom, y_top = axes[i].get_ylim() # axis limits
height = bar.get_height() # bar's height
va = 'bottom'
offset = 3
color = 'k'
fg = 'w'
# keep label within plot
if (y_top < 1.1 * height):
offset = -3
va = 'top'
color='w'
fg = 'k'
# annotate the bar
axes[i].annotate('{:.2f}'.format(height),
xy=(bar.get_x() + bar.get_width()/2, height),
xytext=(0,offset),
textcoords="offset points",
ha='center', va=va, color=color)
# set custom legend
legend_elements = [Patch(facecolor='tomato', label='Serial'),
Patch(facecolor='royalblue', label='MPI'),
Patch(facecolor='limegreen', label='CUDA'),
Patch(facecolor='orange', label='Hybrid')]
plt.legend(handles=legend_elements, loc="upper center", fancybox=False,
edgecolor='k', ncol=4, bbox_to_anchor=(-2, -0.1))
plt.show()
This is a partial answer.
This might be a bug, since I couldn't reproduce the problem until I switched to a Jupyter notebook in a Debian system (different hardware too). Your figure gets drawn correctly in my macOS Jupyter notebook, and in Debian when displayed from a .py script.
The problem appears to be with your annotations. If you make the tight_layout call after annotation, you might get a warning like this:
<ipython-input-80-f9f592f5efc5>:88: UserWarning: Tight layout not applied. The bottom and top margins cannot be made large enough to accommodate all axes decorations.
fig.tight_layout(rect=[0, 0.03, 1, 0.95])
It seems like the annotate function is calculating some totally wacky coordinates for your annotations, though the text ends up in the right spot. If you remove them, the white space disappears. You can try calculating the xy coordinates a for your annotations a different way. This might get you started:
axes[i].annotate('{:.2f}'.format(height),
xy=(bar.get_x() + bar.get_width()/2, height),
xytext=(0,offset),
textcoords="offset points",
xycoords="axes points", # change
ha='center', va=va, color=color)
Output:
To correctly calculate the points, you can try using the appropriate axis transformation, though again, I couldn't get it to work and it might be related to a bug.
try putting the fig.tight_layout(rect=[0, 0.03, 1, 0.95]) after all the plotting commands, as below.
import numpy as np
from matplotlib import pyplot as plt
from matplotlib.patches import Patch
from matplotlib import rcParams
rcParams['font.family'] = 'sans-serif'
rcParams['font.sans-serif'] = ['Arial']
department = ["100", "1,000", "10,000", \
"100,000", "1,000,000"]
quarter = ["Serial", "MPI", "CUDA", "Hybrid"]
budgets = np.array([[0.049979, 0.43584, 2.787366, 19.75062, 201.6935],\
[2.184624, 0.175213, 0.677837, 5.265575, 46.33678],\
[0.050294, 0.068537, 0.23739, 1.93778, 18.55734],\
[3.714284, 3.9917, 4.977599, 6.174967, 37.732232]])
budgets = np.transpose(budgets)
em = np.zeros((len(department), len(quarter)))
# set up barchart
x = np.arange(len(department)) # label locations
width = 0.8 # width of all the bars
# set up figure
fig, (ax1, ax2, ax3, ax4, ax5) = plt.subplots(1, 5)
axes = [ax1, ax2, ax3, ax4, ax5]
# generate bars
rects = []
color = ["tomato", "royalblue", "limegreen", "orange"]
n = len(quarter)
for i in range(n):
bar_x = x - width/2.0 + i/float(n)*width + width/(n*2)
m = len(budgets[:,i])
for j in range(m):
bar_x = x[j] - width/2.0 + i/float(n)*width + width/(n*2)
e = budgets[j,i]
#bar_x = x - width/2.0 + i/float(n)*width + width/(n*2)
rects.append(axes[j].bar(bar_x, e, width=width/float(n), \
label=quarter[i], color=color[i]))
# set figure properties
fig.set_size_inches(12, 2.5)
#fig.tight_layout(rect=[0, 0.03, 1, 0.95])
nAx = len(axes)
for i in range(nAx):
#axes[i].set_aspect("auto")
axes[i].tick_params(axis='x', which='both', bottom=False, top=False,
labelbottom=False)
ax1.set_ylabel("Time (ms)")
for i in range(nAx):
axes[i].yaxis.grid(which="major", color="white", lw=0.75)
ax1.set_ylim([0, 4])
fig.suptitle("Time per iteration for differing dataset sizes") # title
for i in range(nAx):
axes[i].set_xlabel(department[i])
# annotate bars
for i in range(nAx):
for rect in rects:
j = 0;
for bar in rect:
y_bottom, y_top = axes[i].get_ylim() # axis limits
height = bar.get_height() # bar's height
va = 'bottom'
offset = 3
color = 'k'
fg = 'w'
# keep label within plot
if (y_top < 1.1 * height):
offset = -3
va = 'top'
color='w'
fg = 'k'
# annotate the bar
axes[i].annotate('{:.2f}'.format(height),
xy=(bar.get_x() + bar.get_width()/2, height),
xytext=(0,offset),
textcoords="offset points",
ha='center', va=va, color=color)
# set custom legend
legend_elements = [Patch(facecolor='tomato', label='Serial'),
Patch(facecolor='royalblue', label='MPI'),
Patch(facecolor='limegreen', label='CUDA'),
Patch(facecolor='orange', label='Hybrid')]
plt.legend(handles=legend_elements, loc="upper center", fancybox=False,
edgecolor='k', ncol=4, bbox_to_anchor=(-2, -0.1))
fig.tight_layout(rect=[0, 0.03, 1, 0.95])
plt.show()
I have taken the display colormap code and made it more generic. The problem is that the color maps are now all smooshed together so the graphics are basically unreadable.
How do I increase the size of each colormap display?
Current output:
import numpy as np
import matplotlib.pyplot as plt
# Have colormaps separated into categories:
# http://matplotlib.org/examples/color/colormaps_reference.html
cmaps = [('All Color Maps',
"Accent, Accent_r, Blues, Blues_r, BrBG, BrBG_r, BuGn, BuGn_r, BuPu, BuPu_r, CMRmap, CMRmap_r, Dark2, Dark2_r, GnBu, GnBu_r, Greens, Greens_r, Greys, Greys_r, OrRd, OrRd_r, Oranges, Oranges_r, PRGn, PRGn_r, Paired, Paired_r, Pastel1, Pastel1_r, Pastel2, Pastel2_r, PiYG, PiYG_r, PuBu, PuBuGn, PuBuGn_r, PuBu_r, PuOr, PuOr_r, PuRd, PuRd_r, Purples, Purples_r, RdBu, RdBu_r, RdGy, RdGy_r, RdPu, RdPu_r, RdYlBu, RdYlBu_r, RdYlGn, RdYlGn_r, Reds, Reds_r, Set1, Set1_r, Set2, Set2_r, Set3, Set3_r, Spectral, Spectral_r, Wistia, Wistia_r, YlGn, YlGnBu, YlGnBu_r, YlGn_r, YlOrBr, YlOrBr_r, YlOrRd, YlOrRd_r, afmhot, afmhot_r, autumn, autumn_r, binary, binary_r, bone, bone_r, brg, brg_r, bwr, bwr_r, cool, cool_r, coolwarm, coolwarm_r, copper, copper_r, cubehelix, cubehelix_r, flag, flag_r, gist_earth, gist_earth_r, gist_gray, gist_gray_r, gist_heat, gist_heat_r, gist_ncar, gist_ncar_r, gist_rainbow, gist_rainbow_r, gist_stern, gist_stern_r, gist_yarg, gist_yarg_r, gnuplot, gnuplot2, gnuplot2_r, gnuplot_r, gray, gray_r, hot, hot_r, hsv, hsv_r, inferno, inferno_r, jet, jet_r, magma, magma_r, nipy_spectral, nipy_spectral_r, ocean, ocean_r, pink, pink_r, plasma, plasma_r, prism, prism_r, rainbow, rainbow_r, seismic, seismic_r, spectral, spectral_r, spring, spring_r, summer, summer_r, terrain, terrain_r, viridis, viridis_r, winter, winter_r".replace(" ", "").split(',')
)]
nrows = max(len(cmap_list) for cmap_category, cmap_list in cmaps)
gradient = np.linspace(0, 1, 256)
gradient = np.vstack((gradient, gradient))
def plot_color_gradients(cmap_category, cmap_list, nrows):
fig, axes = plt.subplots(nrows=nrows)
fig.subplots_adjust(top=0.95, bottom=0.01, left=0.2, right=0.99)
axes[0].set_title(cmap_category + ' colormaps', fontsize=14)
for ax, name in zip(axes, cmap_list):
ax.imshow(gradient, aspect='auto', cmap=plt.get_cmap(name))
pos = list(ax.get_position().bounds)
x_text = pos[0] - 0.01
y_text = pos[1] + pos[3]/2.
fig.text(x_text, y_text, name, va='center', ha='right', fontsize=10)
# Turn off *all* ticks & spines, not just the ones with colormaps.
for ax in axes:
ax.set_axis_off()
for cmap_category, cmap_list in cmaps:
plot_color_gradients(cmap_category, cmap_list, nrows)
plt.show()
If you insist on having the plot look as close to what you have shown as possible, i.e. one column of 256 subplots with large labels, then the only real solution is to increase the size of the figure as mentioned in the answer by #Diziet Asahi.
That being said, I have 2 proposals for improvement.
Option 1
Split the subplots into 2 columns. This makes the image far easier to read IMO. This only takes a small modification to your plotting function:
def plot_color_gradients(cmap_category, cmap_list, nrows):
fig, axes = plt.subplots(nrows=int(nrows/2), ncols=2, figsize=(12,11))
fig.subplots_adjust(top=0.95, bottom=0.01, left=0.1, right=0.98, wspace=0.25)
fig.suptitle(cmap_category + ' colormaps', fontsize=14)
for ax, name in zip(axes.flatten(), cmap_list):
ax.imshow(gradient, aspect='auto', cmap=plt.get_cmap(name))
pos = list(ax.get_position().bounds)
x_text = pos[0] - 0.01
y_text = pos[1] + pos[3]/2.
fig.text(x_text, y_text, name, va='center', ha='right', fontsize=10)
ax.set_axis_off() # Don't need a separate loop for this
Which gives:
Option 2
If you want to keep everything in 1 column there may be a work around to at least make the plot look slightly better. That is to put every other label on the right hand side of the axis.
Note: this may not be what be exactly what you are looking for, but unless you make the figure very large (tall) then the image is always going to look cramped
Changing your plotting function like so gives the following graph:
def plot_color_gradients(cmap_category, cmap_list, nrows):
fig, axes = plt.subplots(nrows=nrows)
fig.subplots_adjust(top=0.95, bottom=0.01, left=0.2, right=0.9)
axes[0].set_title(cmap_category + ' colormaps', fontsize=14)
count = 0
for ax, name in zip(axes, cmap_list):
ax.imshow(gradient, aspect='auto', cmap=plt.get_cmap(name))
pos = list(ax.get_position().bounds)
ax.set_axis_off()
if count == 1:
count = 0
x_text = pos[0] + 0.71
y_text = pos[1] + pos[3] / 2.
fig.text(x_text, y_text, name, va='center', ha='left', fontsize=10)
else:
count = 1
x_text = pos[0] - 0.01
y_text = pos[1] + pos[3]/2.
fig.text(x_text, y_text, name, va='center', ha='right', fontsize=10)
# Theres no need to loop through list of axes twice. Do this in the above loop!
# Turn off *all* ticks & spines, not just the ones with colormaps.
#for ax in axes:
# ax.set_axis_off()
Not as good as the first example, but an improvement nonetheless.
As #DavidG commented, you need to increase the size of your figure. In the code below, replace width and height by appropriate values. Since you seem to want a variable number of lines, height should probably be proportional to nrows
def plot_color_gradients(cmap_category, cmap_list, nrows):
height = some_value * nrows
fig, axes = plt.subplots(nrows=nrows, figsize=(width, height))
...
I generated a bar plot, how can I display the value of the bar on each bar?
Current plot:
What I am trying to get:
My code:
import os
import numpy as np
import matplotlib.pyplot as plt
x = [u'INFO', u'CUISINE', u'TYPE_OF_PLACE', u'DRINK', u'PLACE', u'MEAL_TIME', u'DISH', u'NEIGHBOURHOOD']
y = [160, 167, 137, 18, 120, 36, 155, 130]
fig, ax = plt.subplots()
width = 0.75 # the width of the bars
ind = np.arange(len(y)) # the x locations for the groups
ax.barh(ind, y, width, color="blue")
ax.set_yticks(ind+width/2)
ax.set_yticklabels(x, minor=False)
plt.title('title')
plt.xlabel('x')
plt.ylabel('y')
#plt.show()
plt.savefig(os.path.join('test.png'), dpi=300, format='png', bbox_inches='tight') # use format='svg' or 'pdf' for vectorial pictures
Update: there's a built in method for this now! Scroll down a couple answers to "New in matplotlib 3.4.0".
If you can't upgrade that far, it doesn't take much code. Add:
for i, v in enumerate(y):
ax.text(v + 3, i + .25, str(v), color='blue', fontweight='bold')
result:
The y-values v are both the x-location and the string values for ax.text, and conveniently the barplot has a metric of 1 for each bar, so the enumeration i is the y-location.
New in matplotlib 3.4.0
There is now a built-in Axes.bar_label helper method to auto-label bars:
fig, ax = plt.subplots()
bars = ax.barh(indexes, values)
ax.bar_label(bars)
Note that for grouped/stacked bar plots, there will multiple bar containers, which can all be accessed via ax.containers:
for bars in ax.containers:
ax.bar_label(bars)
More details:
How to add thousands separators (commas) to labels
How to apply f-strings to labels
How to add spacing to labels
I have noticed api example code contains an example of barchart with the value of the bar displayed on each bar:
"""
========
Barchart
========
A bar plot with errorbars and height labels on individual bars
"""
import numpy as np
import matplotlib.pyplot as plt
N = 5
men_means = (20, 35, 30, 35, 27)
men_std = (2, 3, 4, 1, 2)
ind = np.arange(N) # the x locations for the groups
width = 0.35 # the width of the bars
fig, ax = plt.subplots()
rects1 = ax.bar(ind, men_means, width, color='r', yerr=men_std)
women_means = (25, 32, 34, 20, 25)
women_std = (3, 5, 2, 3, 3)
rects2 = ax.bar(ind + width, women_means, width, color='y', yerr=women_std)
# add some text for labels, title and axes ticks
ax.set_ylabel('Scores')
ax.set_title('Scores by group and gender')
ax.set_xticks(ind + width / 2)
ax.set_xticklabels(('G1', 'G2', 'G3', 'G4', 'G5'))
ax.legend((rects1[0], rects2[0]), ('Men', 'Women'))
def autolabel(rects):
"""
Attach a text label above each bar displaying its height
"""
for rect in rects:
height = rect.get_height()
ax.text(rect.get_x() + rect.get_width()/2., 1.05*height,
'%d' % int(height),
ha='center', va='bottom')
autolabel(rects1)
autolabel(rects2)
plt.show()
output:
FYI What is the unit of height variable in "barh" of matplotlib? (as of now, there is no easy way to set a fixed height for each bar)
Use plt.text() to put text in the plot.
Example:
import matplotlib.pyplot as plt
N = 5
menMeans = (20, 35, 30, 35, 27)
ind = np.arange(N)
#Creating a figure with some fig size
fig, ax = plt.subplots(figsize = (10,5))
ax.bar(ind,menMeans,width=0.4)
#Now the trick is here.
#plt.text() , you need to give (x,y) location , where you want to put the numbers,
#So here index will give you x pos and data+1 will provide a little gap in y axis.
for index,data in enumerate(menMeans):
plt.text(x=index , y =data+1 , s=f"{data}" , fontdict=dict(fontsize=20))
plt.tight_layout()
plt.show()
This will show the figure as:
For anyone wanting to have their label at the base of their bars just divide v by the value of the label like this:
for i, v in enumerate(labels):
axes.text(i-.25,
v/labels[i]+100,
labels[i],
fontsize=18,
color=label_color_list[i])
(note: I added 100 so it wasn't absolutely at the bottom)
To get a result like this:
I know it's an old thread, but I landed here several times via Google and think no given answer is really satisfying yet. Try using one of the following functions:
EDIT: As I'm getting some likes on this old thread, I wanna share an updated solution as well (basically putting my two previous functions together and automatically deciding whether it's a bar or hbar plot):
def label_bars(ax, bars, text_format, **kwargs):
"""
Attaches a label on every bar of a regular or horizontal bar chart
"""
ys = [bar.get_y() for bar in bars]
y_is_constant = all(y == ys[0] for y in ys) # -> regular bar chart, since all all bars start on the same y level (0)
if y_is_constant:
_label_bar(ax, bars, text_format, **kwargs)
else:
_label_barh(ax, bars, text_format, **kwargs)
def _label_bar(ax, bars, text_format, **kwargs):
"""
Attach a text label to each bar displaying its y value
"""
max_y_value = ax.get_ylim()[1]
inside_distance = max_y_value * 0.05
outside_distance = max_y_value * 0.01
for bar in bars:
text = text_format.format(bar.get_height())
text_x = bar.get_x() + bar.get_width() / 2
is_inside = bar.get_height() >= max_y_value * 0.15
if is_inside:
color = "white"
text_y = bar.get_height() - inside_distance
else:
color = "black"
text_y = bar.get_height() + outside_distance
ax.text(text_x, text_y, text, ha='center', va='bottom', color=color, **kwargs)
def _label_barh(ax, bars, text_format, **kwargs):
"""
Attach a text label to each bar displaying its y value
Note: label always outside. otherwise it's too hard to control as numbers can be very long
"""
max_x_value = ax.get_xlim()[1]
distance = max_x_value * 0.0025
for bar in bars:
text = text_format.format(bar.get_width())
text_x = bar.get_width() + distance
text_y = bar.get_y() + bar.get_height() / 2
ax.text(text_x, text_y, text, va='center', **kwargs)
Now you can use them for regular bar plots:
fig, ax = plt.subplots((5, 5))
bars = ax.bar(x_pos, values, width=0.5, align="center")
value_format = "{:.1%}" # displaying values as percentage with one fractional digit
label_bars(ax, bars, value_format)
or for horizontal bar plots:
fig, ax = plt.subplots((5, 5))
horizontal_bars = ax.barh(y_pos, values, width=0.5, align="center")
value_format = "{:.1%}" # displaying values as percentage with one fractional digit
label_bars(ax, horizontal_bars, value_format)
For pandas people :
ax = s.plot(kind='barh') # s is a Series (float) in [0,1]
[ax.text(v, i, '{:.2f}%'.format(100*v)) for i, v in enumerate(s)];
That's it.
Alternatively, for those who prefer apply over looping with enumerate:
it = iter(range(len(s)))
s.apply(lambda x: ax.text(x, next(it),'{:.2f}%'.format(100*x)));
Also, ax.patches will give you the bars that you would get with ax.bar(...). In case you want to apply the functions of #SaturnFromTitan or techniques of others.
I needed the bar labels too, note that my y-axis is having a zoomed view using limits on y axis. The default calculations for putting the labels on top of the bar still works using height (use_global_coordinate=False in the example). But I wanted to show that the labels can be put in the bottom of the graph too in zoomed view using global coordinates in matplotlib 3.0.2. Hope it help someone.
def autolabel(rects,data):
"""
Attach a text label above each bar displaying its height
"""
c = 0
initial = 0.091
offset = 0.205
use_global_coordinate = True
if use_global_coordinate:
for i in data:
ax.text(initial+offset*c, 0.05, str(i), horizontalalignment='center',
verticalalignment='center', transform=ax.transAxes,fontsize=8)
c=c+1
else:
for rect,i in zip(rects,data):
height = rect.get_height()
ax.text(rect.get_x() + rect.get_width()/2., height,str(i),ha='center', va='bottom')
I was trying to do this with stacked plot bars. The code that worked for me was.
# Code to plot. Notice the variable ax.
ax = df.groupby('target').count().T.plot.bar(stacked=True, figsize=(10, 6))
ax.legend(bbox_to_anchor=(1.1, 1.05))
# Loop to add on each bar a tag in position
for rect in ax.patches:
height = rect.get_height()
ypos = rect.get_y() + height/2
ax.text(rect.get_x() + rect.get_width()/2., ypos,
'%d' % int(height), ha='center', va='bottom')
Simply add this:
for i in range(len(y)):
plt.text(x= y[i],y= i,s= y[i], c='b')
for every item in the list(y), print the value(s) as blue-colored text on the plot in the position specified (x=position on x-axis and y=position on y-axis)
Check this link
Matplotlib Gallery
This is how I used the code snippet of autolabel.
def autolabel(rects):
"""Attach a text label above each bar in *rects*, displaying its height."""
for rect in rects:
height = rect.get_height()
ax.annotate('{}'.format(height),
xy=(rect.get_x() + rect.get_width() / 2, height),
xytext=(0, 3), # 3 points vertical offset
textcoords="offset points",
ha='center', va='bottom')
temp = df_launch.groupby(['yr_mt','year','month'])['subs_trend'].agg(subs_count='sum').sort_values(['year','month']).reset_index()
_, ax = plt.subplots(1,1, figsize=(30,10))
bar = ax.bar(height=temp['subs_count'],x=temp['yr_mt'] ,color ='g')
autolabel(bar)
ax.set_title('Monthly Change in Subscribers from Launch Date')
ax.set_ylabel('Subscriber Count Change')
ax.set_xlabel('Time')
plt.show()
I am pretty new to python and want to plot a dataset using a histogram and a heatmap below. However, I am a bit confused about
How to put a title above both plots and
How to insert some text into bots plots
How to reference the upper and the lower plot
For my first task I used the title instruction, which inserted a caption in between both plots instead of putting it above both plots
For my second task I used the figtext instruction. However, I could not see the text anywhere in the plot. I played a bit with the x, y and fontsize parameters without any success.
Here is my code:
def drawHeatmap(xDim, yDim, plot, threshold, verbose):
global heatmapList
stableCells = 0
print("\n[I] - Plotting Heatmaps ...")
for currentHeatmap in heatmapList:
if -1 in heatmapList[currentHeatmap]:
continue
print("[I] - Plotting heatmap for PUF instance", currentHeatmap,"(",len(heatmapList[currentHeatmap])," values)")
# Convert data to ndarray
#floatMap = list(map(float, currentHeatmap[1]))
myArray = np.array(heatmapList[currentHeatmap]).reshape(xDim,yDim)
# Setup two plots per page
fig, ax = plt.subplots(2)
# Histogram
weights = np.ones_like(heatmapList[currentHeatmap]) / len(heatmapList[currentHeatmap])
hist, bins = np.histogram(heatmapList[currentHeatmap], bins=50, weights=weights)
width = 0.7 * (bins[1] - bins[0])
center = (bins[:-1] + bins[1:]) / 2
ax[0].bar(center, hist, align='center', width=width)
stableCells = calcPercentageStable(threshold, verbose)
plt.figtext(100,100,"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!", fontsize=40)
heatmap = ax[1].pcolor(myArray, cmap=plt.cm.Blues, alpha=0.8, vmin=0, vmax=1)
cbar = fig.colorbar(heatmap, shrink=0.8, aspect=10, fraction=.1,pad=.01)
#cbar.ax.tick_params(labelsize=40)
for y in range(myArray.shape[0]):
for x in range(myArray.shape[1]):
plt.text(x + 0.5, y + 0.5, '%.2f' % myArray[y, x],
horizontalalignment='center',
verticalalignment='center',
fontsize=(xDim/yDim)*5
)
#fig = plt.figure()
fig = matplotlib.pyplot.gcf()
fig.set_size_inches(60.5,55.5)
plt.savefig(dataDirectory+"/"+currentHeatmap+".pdf", dpi=800, papertype="a3", format="pdf")
#plt.title("Heatmap for PUF instance "+str(currentHeatmap[0][0])+" ("+str(numberOfMeasurements)+" measurements; "+str(sizeOfMeasurements)+" bytes)")
if plot:
plt.show()
print("\t[I] - Done ...")
And here is my current output:
Perhaps this example will make things easier to understand. Things to note are:
Use fig.suptitle to add a title to the top of a figure.
Use ax[i].text(x, y, str) to add text to an Axes object
Each Axes object, ax[i] in your case, holds all the information about a single plot. Use them instead of calling plt, which only really works well with one subplot per figure or to modify all subplots at once. For example, instead of calling plt.figtext, call ax[0].text to add text to the top plot.
Try following the example code below, or at least read through it to get a better idea how to use your ax list.
import numpy as np
import matplotlib.pyplot as plt
histogram_data = np.random.rand(1000)
heatmap_data = np.random.rand(10, 100)
# Set up figure and axes
fig = plt.figure()
fig.suptitle("These are my two plots")
top_ax = fig.add_subplot(211) #2 rows, 1 col, 1st plot
bot_ax = fig.add_subplot(212) #2 rows, 1 col, 2nd plot
# This is the same as doing 'fig, (top_ax, bot_ax) = plt.subplots(2)'
# Histogram
weights = np.ones_like(histogram_data) / histogram_data.shape[0]
hist, bins = np.histogram(histogram_data, bins=50, weights=weights)
width = 0.7 * (bins[1] - bins[0])
center = (bins[:-1] + bins[1:]) / 2
# Use top_ax to modify anything with the histogram plot
top_ax.bar(center, hist, align='center', width=width)
# ax.text(x, y, str). Make sure x,y are within your plot bounds ((0, 1), (0, .5))
top_ax.text(0.5, 0.5, "Here is text on the top plot", color='r')
# Heatmap
heatmap_params = {'cmap':plt.cm.Blues, 'alpha':0.8, 'vmin':0, 'vmax':1}
# Use bot_ax to modify anything with the heatmap plot
heatmap = bot_ax.pcolor(heatmap_data, **heatmap_params)
cbar = fig.colorbar(heatmap, shrink=0.8, aspect=10, fraction=.1,pad=.01)
# See how it looks
plt.show()