Related
I use Python and NumPy and have some problems with "transpose":
import numpy as np
a = np.array([5,4])
print(a)
print(a.T)
Invoking a.T is not transposing the array. If a is for example [[],[]] then it transposes correctly, but I need the transpose of [...,...,...].
It's working exactly as it's supposed to. The transpose of a 1D array is still a 1D array! (If you're used to matlab, it fundamentally doesn't have a concept of a 1D array. Matlab's "1D" arrays are 2D.)
If you want to turn your 1D vector into a 2D array and then transpose it, just slice it with np.newaxis (or None, they're the same, newaxis is just more readable).
import numpy as np
a = np.array([5,4])[np.newaxis]
print(a)
print(a.T)
Generally speaking though, you don't ever need to worry about this. Adding the extra dimension is usually not what you want, if you're just doing it out of habit. Numpy will automatically broadcast a 1D array when doing various calculations. There's usually no need to distinguish between a row vector and a column vector (neither of which are vectors. They're both 2D!) when you just want a vector.
Use two bracket pairs instead of one. This creates a 2D array, which can be transposed, unlike the 1D array you create if you use one bracket pair.
import numpy as np
a = np.array([[5, 4]])
a.T
More thorough example:
>>> a = [3,6,9]
>>> b = np.array(a)
>>> b.T
array([3, 6, 9]) #Here it didn't transpose because 'a' is 1 dimensional
>>> b = np.array([a])
>>> b.T
array([[3], #Here it did transpose because a is 2 dimensional
[6],
[9]])
Use numpy's shape method to see what is going on here:
>>> b = np.array([10,20,30])
>>> b.shape
(3,)
>>> b = np.array([[10,20,30]])
>>> b.shape
(1, 3)
For 1D arrays:
a = np.array([1, 2, 3, 4])
a = a.reshape((-1, 1)) # <--- THIS IS IT
print a
array([[1],
[2],
[3],
[4]])
Once you understand that -1 here means "as many rows as needed", I find this to be the most readable way of "transposing" an array. If your array is of higher dimensionality simply use a.T.
You can convert an existing vector into a matrix by wrapping it in an extra set of square brackets...
from numpy import *
v=array([5,4]) ## create a numpy vector
array([v]).T ## transpose a vector into a matrix
numpy also has a matrix class (see array vs. matrix)...
matrix(v).T ## transpose a vector into a matrix
numpy 1D array --> column/row matrix:
>>> a=np.array([1,2,4])
>>> a[:, None] # col
array([[1],
[2],
[4]])
>>> a[None, :] # row, or faster `a[None]`
array([[1, 2, 4]])
And as #joe-kington said, you can replace None with np.newaxis for readability.
To 'transpose' a 1d array to a 2d column, you can use numpy.vstack:
>>> numpy.vstack(numpy.array([1,2,3]))
array([[1],
[2],
[3]])
It also works for vanilla lists:
>>> numpy.vstack([1,2,3])
array([[1],
[2],
[3]])
instead use arr[:,None] to create column vector
You can only transpose a 2D array. You can use numpy.matrix to create a 2D array. This is three years late, but I am just adding to the possible set of solutions:
import numpy as np
m = np.matrix([2, 3])
m.T
Basically what the transpose function does is to swap the shape and strides of the array:
>>> a = np.ones((1,2,3))
>>> a.shape
(1, 2, 3)
>>> a.T.shape
(3, 2, 1)
>>> a.strides
(48, 24, 8)
>>> a.T.strides
(8, 24, 48)
In case of 1D numpy array (rank-1 array) the shape and strides are 1-element tuples and cannot be swapped, and the transpose of such an 1D array returns it unchanged. Instead, you can transpose a "row-vector" (numpy array of shape (1, n)) into a "column-vector" (numpy array of shape (n, 1)). To achieve this you have to first convert your 1D numpy array into row-vector and then swap the shape and strides (transpose it). Below is a function that does it:
from numpy.lib.stride_tricks import as_strided
def transpose(a):
a = np.atleast_2d(a)
return as_strided(a, shape=a.shape[::-1], strides=a.strides[::-1])
Example:
>>> a = np.arange(3)
>>> a
array([0, 1, 2])
>>> transpose(a)
array([[0],
[1],
[2]])
>>> a = np.arange(1, 7).reshape(2,3)
>>> a
array([[1, 2, 3],
[4, 5, 6]])
>>> transpose(a)
array([[1, 4],
[2, 5],
[3, 6]])
Of course you don't have to do it this way since you have a 1D array and you can directly reshape it into (n, 1) array by a.reshape((-1, 1)) or a[:, None]. I just wanted to demonstrate how transposing an array works.
Another solution.... :-)
import numpy as np
a = [1,2,4]
[1, 2, 4]
b = np.array([a]).T
array([[1],
[2],
[4]])
The name of the function in numpy is column_stack.
>>>a=np.array([5,4])
>>>np.column_stack(a)
array([[5, 4]])
I am just consolidating the above post, hope it will help others to save some time:
The below array has (2, )dimension, it's a 1-D array,
b_new = np.array([2j, 3j])
There are two ways to transpose a 1-D array:
slice it with "np.newaxis" or none.!
print(b_new[np.newaxis].T.shape)
print(b_new[None].T.shape)
other way of writing, the above without T operation.!
print(b_new[:, np.newaxis].shape)
print(b_new[:, None].shape)
Wrapping [ ] or using np.matrix, means adding a new dimension.!
print(np.array([b_new]).T.shape)
print(np.matrix(b_new).T.shape)
There is a method not described in the answers but described in the documentation for the numpy.ndarray.transpose method:
For a 1-D array this has no effect, as a transposed vector is simply the same vector. To convert a 1-D array into a 2D column vector, an additional dimension must be added. np.atleast2d(a).T achieves this, as does a[:, np.newaxis].
One can do:
import numpy as np
a = np.array([5,4])
print(a)
print(np.atleast_2d(a).T)
Which (imo) is nicer than using newaxis.
As some of the comments above mentioned, the transpose of 1D arrays are 1D arrays, so one way to transpose a 1D array would be to convert the array to a matrix like so:
np.transpose(a.reshape(len(a), 1))
To transpose a 1-D array (flat array) as you have in your example, you can use the np.expand_dims() function:
>>> a = np.expand_dims(np.array([5, 4]), axis=1)
array([[5],
[4]])
np.expand_dims() will add a dimension to the chosen axis. In this case, we use axis=1, which adds a column dimension, effectively transposing your original flat array.
I am trying to get the dotproduct of two arrays in python using the numpy package. I get as output an array of size (n,). It says that my array has no column while I do see the results when I print it. Why does my array have no column and how do I fix this?
My goal is to calculate y - np.dot(x,b). The issue is that y is (124, 1) while np.dot(x,b) is (124,)
Thanks
It seems that you are trying to subtract two arrays of a different shape. Fortunately, it is off by a single additional axis, so there are two ways of handling it.
(1) You slice the y array to match the shape of the dot(x,b) array:
y = y[:,0]
print(y-np.dot(x,b))
(2) You add an additional axis on the np.dot(x,b) array:
dot = np.dot(x,b)
dot = dot[:,None]
print(y-dot)
Hope this helps
it may depends on the dimension of your array
For example :
a = [1, 0]
b = [[4, 1], [2, 2]]
c = np.dot(a,b)
gives
array([4, 1])
and its shape is (2,)
but if you change a like :
a = [[1, 0],[1,1]]
then result is :
array([[4, 1],
[6, 3]])
and its shape is (2,2)
I am using a python wrapper to call functions of a c++ dll library. A ctype is returned by the dll library, which I convert to numpy array
score = np.ctypeslib.as_array(score,1)
however, the array has no shape?
score
>>> array(-0.019486344729027664)
score.shape
>>> ()
score[0]
>>> IndexError: too many indices for array
How can I extract a double from the score array?
Thank you.
You can access the data inside a 0-dimensional array via indexing [()].
For example, score[()] will retrieve the underlying data in your array.
The idiom is in fact consistent:
# x, y, z are 0-dim, 1-dim, 2-dim respectively
x = np.array(1)
y = np.array([1, 2, 3])
z = np.array([[1, 2, 3], [4, 5, 6]])
# use 0-dim, 1-dim, 2-dim tuple indexers respectively
res_x = x[()] # 1
res_y = y[(1,)] # 2
res_z = z[(1, 2)] # 6
Tuples seem unnatural because you don't need to use them explicitly for the 1d and 2d cases, i.e. y[1] and z[1, 2] suffice. That option isn't available for the 0-dim case, so use the zero-length tuple.
I would like to use dask to do the following operation; let say I have a numpy array:
In: x = np.arange(5)
Out: [0,1,2,3,4]
Then I want a function to map np.arange to all the elements of my array.
I have already defined a function for that purpose:
def list_range(array, no_cell):
return np.add.outer(array, np.arange(no_cell)).T
# e.g
In: list_range(x,3)
Out: array([[0, 1, 2, 3, 4],
[1, 2, 3, 4, 5],
[2, 3, 4, 5, 6]])
Now I want to reproduce this in parallel using map_blocks on a dask array but I always get an error. Here is my attempt based on the dask documentation of map_blocks:
constant = 4
d = da.arange(5, chunks=(2,))
f = da.core.map_blocks(list_range, d, constant, chunks=(2,))
f.compute()
I get
ValueError: could not broadcast input array from shape (4,2) into shape (4)
Have you checked out Dask's ufunc methods? For your problem, you can try,
da.add.outer(d, np.arange(constant)).T.compute()
While using map_blocks, you have to make sure that you specify the new dimensions when your operation results in a change in chunk dimensions. In your problem, the chunk dimension is no more (2,), and instead is (2,4). This new dimension should be specified using the new_axis parameter. Also, I found that map_blocks is not vstacking the blocks after map_blocks, and I couldn't get the transpose to work within the mapped function. Try this to make map_blocks work,
def list_range(array, no_cell):
return np.add.outer(array, np.arange(no_cell))
constant = 4
d = da.arange(5, chunks=(2,))
f=da.core.map_blocks(list_range, d, constant, chunks=(2,constant), new_axis=[1])
f.T.compute()
I want to convert a 1-dimensional array into a 2-dimensional array by specifying the number of columns in the 2D array. Something that would work like this:
> import numpy as np
> A = np.array([1,2,3,4,5,6])
> B = vec2matrix(A,ncol=2)
> B
array([[1, 2],
[3, 4],
[5, 6]])
Does numpy have a function that works like my made-up function "vec2matrix"? (I understand that you can index a 1D array like a 2D array, but that isn't an option in the code I have - I need to make this conversion.)
You want to reshape the array.
B = np.reshape(A, (-1, 2))
where -1 infers the size of the new dimension from the size of the input array.
You have two options:
If you no longer want the original shape, the easiest is just to assign a new shape to the array
a.shape = (a.size//ncols, ncols)
You can switch the a.size//ncols by -1 to compute the proper shape automatically. Make sure that a.shape[0]*a.shape[1]=a.size, else you'll run into some problem.
You can get a new array with the np.reshape function, that works mostly like the version presented above
new = np.reshape(a, (-1, ncols))
When it's possible, new will be just a view of the initial array a, meaning that the data are shared. In some cases, though, new array will be acopy instead. Note that np.reshape also accepts an optional keyword order that lets you switch from row-major C order to column-major Fortran order. np.reshape is the function version of the a.reshape method.
If you can't respect the requirement a.shape[0]*a.shape[1]=a.size, you're stuck with having to create a new array. You can use the np.resize function and mixing it with np.reshape, such as
>>> a =np.arange(9)
>>> np.resize(a, 10).reshape(5,2)
Try something like:
B = np.reshape(A,(-1,ncols))
You'll need to make sure that you can divide the number of elements in your array by ncols though. You can also play with the order in which the numbers are pulled into B using the order keyword.
If your sole purpose is to convert a 1d array X to a 2d array just do:
X = np.reshape(X,(1, X.size))
convert a 1-dimensional array into a 2-dimensional array by adding new axis.
a=np.array([10,20,30,40,50,60])
b=a[:,np.newaxis]--it will convert it to two dimension.
There is a simple way as well, we can use the reshape function in a different way:
A_reshape = A.reshape(No_of_rows, No_of_columns)
You can useflatten() from the numpy package.
import numpy as np
a = np.array([[1, 2],
[3, 4],
[5, 6]])
a_flat = a.flatten()
print(f"original array: {a} \nflattened array = {a_flat}")
Output:
original array: [[1 2]
[3 4]
[5 6]]
flattened array = [1 2 3 4 5 6]
some_array.shape = (1,)+some_array.shape
or get a new one
another_array = numpy.reshape(some_array, (1,)+some_array.shape)
This will make dimensions +1, equals to adding a bracket on the outermost
Change 1D array into 2D array without using Numpy.
l = [i for i in range(1,21)]
part = 3
new = []
start, end = 0, part
while end <= len(l):
temp = []
for i in range(start, end):
temp.append(l[i])
new.append(temp)
start += part
end += part
print("new values: ", new)
# for uneven cases
temp = []
while start < len(l):
temp.append(l[start])
start += 1
new.append(temp)
print("new values for uneven cases: ", new)
import numpy as np
array = np.arange(8)
print("Original array : \n", array)
array = np.arange(8).reshape(2, 4)
print("New array : \n", array)