There are already lots of other questions about the print statement, but I have not found an answer to my problem:
When I do:
for idx in range(10):
print(idx, end="\r")
in the (ipython) terminal directly, it works fine and always overwrites the previous line. However, when running this in a module with PyCharm, I don't see any lines printed in the stdout.
Is this a known PyCharm issue?
Try to add \r at the beginning of your printed string (not at the end):
for idx in range(10):
print('\r', idx, end='')
Carriage return at front, and end with '' to avoid new line '\n'. One solution to avoid the space is to use the format convention:
for idx in range(10):
print("'\r{0}".format(idx), end='')
I had the same issue. While a solution using print() has eluded me, I have found sys.stdout.write works fine. (Win10, Python 3.5.1, Pycharm 2016.3.2)
import sys
import time
def countdown(n):
for x in reversed(range(n)):
sys.stdout.write('\r' + str(x))
time.sleep(1)
countdown(60)
Related
[printing slowly (Simulate typing)
I got my answer from the link above but it only works when you put the string as a parameter when calling function.
I want the code to print slowly every time when I use print().
is it possible?
Yes, you can do it like this, however, I think it's not a good idea:
import time
def dprint(string):
for letter in string:
__builtins__.print(letter,end = '', flush=True)
time.sleep(.1)
__builtins__.print("")
print = dprint
print("something")
Yes, you can do it using the stdout version as below.
import sys, time
def print(s):
for letter in s:
sys.stdout.write(letter)
time.sleep(.1)
print("Foo")
Changing the default behaviour of print() is not recommended and was only introduced for purpose of porting Python 2 programs easily. Moreover overloading the print function without a special parameter will make the default functionality of print() moot.
Create another function with adds a delay to the prints. Also remember that you cannot use print() because it appends a new line. You’ll have to you sys.stdout.write()
So a basic function would look like:
def typrint(x):
for i in len(x):
sys.stdout.write(x[i])
sleep(0.05)
sys.stdout.write(“\n”)
Check this article to see why Python updated print() to a function
I am using this as the solution for the problem,
import sys,time
def delay(str):
for i in str:
sys.stdout.write(i)
sys.stdout.flush()
time.sleep(0.04)
Note: You need to add in every print statement or here "delay" statement "\n".
I want to see the progress of my for loop by repeatedly overwriting the print function. I expected the printed line to be overwritten every time the loop progresses. What happened was that after every loop a new line was printed right under the previous printed line. This was solved by removing the \n from the print line, because the \n caused a new empty line to be overwritten each time, instead of overwriting the first printed line.
import sys
import time
count1=0
x=10
for i in range(x):
count1+=1
sys.stdout.write("\r{} out of {}...\n".format(count1, x))
sys.stdout.flush()
time.sleep(.1)
I am using Python 3.6 (64-bit) in Jupter Notebook 4.3.1. on Windows 10.
I have looked over several issues posted on Stack Overflow, but I haven't been able to solve it yet.
Thanks!
Remove the "\n" that creates a new line.
sys.stdout.write("\r{} out of {}...".format(count1, x))
I have created a simple python program that will count up to 10
What I am trying to achieve is for the program to delete the previous number and print the new number
This is the code that I have created:
import sys
import time
for i in range(10):
text = "\r" + str(i)
sys.stdout.write(text)
sys.stdout.flush()
time.sleep(1)
Which outputs:
0123456789
Changing the code to have the "\r" after the str(i) didn't work either
import sys
import time
for i in range(10):
text = str(i) + "\r"
sys.stdout.write(text)
sys.stdout.flush()
time.sleep(1)
Which also resulted in:
0123456789
I was looking for it to count up, and display at the end only the 9 however it doesn't overwrite the previous numbers
Edit:
I am using Windows, Python3
Edit 2:
How to overwrite the previous print to stdout in python? Does not give me a working answer, it still doesn't do what I want
Therefore due to my excellent reasoning it is not a duplicate :P
As an alternative, you can clear the whole window, by using os.system("cls")
There are some control symbols accepted by virtual terminals. One of them is '\b' that moves a carret for one place back. This one is accepted on Windows too and I will use it in my example below. Unix terminals accept a lot more of controls including color changes and more.
from time import sleep
import sys, os
def clear ():
os.system("cls" if sys.platform.startswith("win") else "clear")
clear()
s = "1"
sys.stdout.write(s)
for x in range(2, 21):
sleep(1)
# Return carret to beginning of line:
l = len(s)
s = l*"\b"
sys.stdout.write(s)
# Clear line (just in case):
s = l*" "
sys.stdout.write(s)
# Return to the beginning again:
s = l*"\b"
sys.stdout.write(s)
# Write over new text:
s = str(x)
sys.stdout.write(s)
Use the end parameter to specify a "\r" as the line ending.
import time
for i in range(10):
print(i, end="\r")
time.sleep(1)
I would do it like this:
for x in range(10):
print("{}".format(x), end="\r")
I believe your code should work perfectly fine. The problem should be that you are using a Windows terminal. Try using Linux. Most code does not work in Windows. You can refer this link to know why you have to stop using python on Windows.
This is also an alternate code you can try.
import time
for i in range(10):
text = str(i)
print(text,end = "\r")
time.sleep(1)
Why not use the standard print of python? Althougth given in many debugger screens this tends to not work. In terminal (ubuntu) it does
import time
for i in range (10):
print(i, end='\r')
time.sleep(1)
Probably for stdout something exists too but in this case I usually use the print of python3
I am trying to clear only last few line from output console window. To achieve this I have decided to use create stopwatch and I have achieved to interrupt on keyboard interrupt and on enter key press it creates lap but my code only create lap once and my current code is clearing whole output screen.
clear.py
import os
import msvcrt, time
from datetime import datetime
from threading import Thread
def threaded_function(arg):
while True:
input()
lap_count = 0
if __name__ == "__main__":
# thread = Thread(target = threaded_function)
# thread.start()
try:
while True:
t = "{}:{}:{}:{}".format(datetime.now().hour, datetime.now().minute, datetime.now().second, datetime.now().microsecond)
print(t)
time.sleep(0.2)
os.system('cls||clear') # I want some way to clear only previous line instead of clearing whole console
if lap_count == 0:
if msvcrt.kbhit():
if msvcrt.getwche() == '\r': # this creates lap only once when I press "Enter" key
lap_count += 1
print("lap : {}".format(t))
time.sleep(1)
continue
except KeyboardInterrupt:
print("lap stop at : {}".format(t))
print(lap_count)
when I run
%run <path-to-script>/clear.py
in my ipython shell I am able to create only one lap but it is not staying for permanent.
To clear only a single line from the output :
print ("\033[A \033[A")
This will clear the preceding line and will place the cursor onto the beginning of the line.
If you strip the trailing newline then it will shift to the previous line as \033[A means put the cursor one line up
I think the simplest way is to use two print() to achieve clean the last line.
print("something will be updated/erased during next loop", end="")
print("\r", end="")
print("the info")
The 1st print() simply make sure the cursor ends at the end of the line and not start a new line
The 2nd print() would move the cursor to the beginning of the same line and not start a new line
Then it comes naturally for the 3rd print() which simply start print something where the cursor is currently at.
I also made a toy function to print progress bar using a loop and time.sleep(), go and check it out
def progression_bar(total_time=10):
num_bar = 50
sleep_intvl = total_time/num_bar
print("start: ")
for i in range(1,num_bar):
print("\r", end="")
print("{:.1%} ".format(i/num_bar),"-"*i, end="")
time.sleep(sleep_intvl)
The codes shared by Ankush Rathi above this comment are probably correct, except for the use of parenthesis in the print command. I personally recommend doing it like this.
print("This message will remain in the console.")
print("This is the message that will be deleted.", end="\r")
One thing to keep in mind though is that if you run it in IDLE by pressing F5, the shell will still display both messages. However, if you run the program by double clicking, the output console will delete it. This might be the misunderstanding that happened with Ankush Rathi's answer (in a previous post).
I know this is a really old question but i couldn't find any good answer at it. You have to use escape characters. Ashish Ghodake suggested to use this
print ("\033[A \033[A")
But what if the line you want to remove has more characters than the spaces in the string?
I think the better thing is to find out how many characters can fit in one of your terminal's lines and then to add the correspondent number of " " in the escape string like this.
import subprocess, time
tput = subprocess.Popen(['tput','cols'], stdout=subprocess.PIPE)
cols = int(tput.communicate()[0].strip()) # the number of columns in a line
i = 0
while True:
print(i)
time.sleep(0.1)
print("\033[A{}\033[A".format(' '*cols))
i += 1
finally I would say that the "function" to remove last line is
import subprocess
def remove():
tput = subprocess.Popen(['tput','cols'], stdout=subprocess.PIPE)
cols = int(tput.communicate()[0].strip())
print("\033[A{}\033[A".format(' '*cols))
For Python 3's, using f-String.
from time import sleep
for i in range(61):
print(f"\r{i}", end="")
sleep(0.1)
Found a solution on this page that works. Here is the helper function:
import sys
def delete_last_line():
"Deletes the last line in the STDOUT"
# cursor up one line
sys.stdout.write('\x1b[1A')
# delete last line
sys.stdout.write('\x1b[2K')
I hope it helps someone.
None of the other answers worked for me. Putting print("Sentence to be overwritten", end='\r') would instantly clear my sentence and it would never be visible to begin with. I'm using PyCharm on a Mac if that could be making the difference. What I had to do is the following:
from time import sleep
print("Sentence to be overwritten", end='')
sleep(1)
print("\r", end='')
print("Sentence to stay")
end='' makes it so the print doesn't automatically put a '\n' character at the end. Then print("\r", end='') will put the cursor at the beginning of the line. Then the 2nd print statement will be printed in the same spot as the first, overwriting it.
If you intend to delete certain line from the console output,
print "I want to keep this line"
print "I want to delete this line",
print "\r " # this is going to delete previous line
or
print "I want to keep this line"
print "I want to delete this line\r "
This question already has an answer here:
Why doesn't print output show up immediately in the terminal when there is no newline at the end?
(1 answer)
Closed last month.
I was trying to create a progress-like thing by printing a dot every second on the same line. Something like "Fishing.....". This is what I used:
import time
print('Fishing', end='')
for i in range(5):
time.sleep(1)
print('.', end='')
But it waits for 5 seconds and prints Fishing..... all at once. But when I don't use the end='', it prints dots every second, but on separate lines like so
Fishing.
.
.
.
.
My questions:
Why does print behave this way?
How can I print a dot every second, but on the same line?
Why does print behave this way?
This has less to do with print and more with your terminal. For performance reasons, the text only gets "flushed" everytime there's a newline character, and not one character at a time.
How can I print a dot every second, but on the same line?
By "flushing" the standard output manually everytime you printed something:
import time
import sys
print('Fishing', end='')
sys.stdout.flush()
for i in range(5):
time.sleep(1)
print('.', end='', flush=True) # another way
If you need this all the time, you could define a seperate flushing print function:
from functools import partial
myprint = partial(print, end='', flush=True)
myprint('Fishing')
for i in range(5):
time.sleep(1)
myprint('.')
This is because print is considered to be an expensive operation: it will usually wait until it has to print a lot of data, or until a new line is encountered (usually only if output is written to a terminal):
Output buffering is determined by file. Use file.flush() to ensure, for instance, immediate appearance on a screen.
Evidently it is not expensive in the sense that it takes minutes: but asking the terminal operator to print new content, or the operating system to write data to a file (in case of I/O redirection) is still not "lightning fast".
You can force to print all data that is still in the queue, by using a flush on the standard output channel.
use
print('.', end="", flush=True)