I tried to make a Twitter bot from https://github.com/joaquinlpereyra/twitterImgBot
The installations went well and successfully but the problem came when I tried to execute it.
Below is the code for my config in the config.py.
Keys and Tokens removed with the API key replaced with random numbers because that's the problem I'm trying to address.
import os
import configparser
import tweepy
abspath = os.path.abspath(__file__)
dname = os.path.dirname(abspath)
# read configs from file
config = configparser.ConfigParser()
config.read(dname + '/settings')
twitter_config = config['Twitter']
api_key = twitter_config['2931928391273123']
secret_key = twitter_config['REMOVED']
token = twitter_config['REMOVED']
secret_token = twitter_config['REMOVED']
The error I'm getting when executing it in cmd is:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>cd C:\Documents and Settings\Administrat
or\Desktop\twitterImgBot-master
C:\Documents and Settings\Administrator\Desktop\twitterImgBot- master>python twitterbot.py
Traceback (most recent call last):
File "twitterbot.py", line 3, in <module>
from settings import config
File "C:\Documents and Settings\Administrator\Desktop\twitterImgBot-master\settings\config.py", line 13, in <module>
api_key = twitter_config['2931928391273123']
File "C:\Python34\lib\configparser.py", line 1203, in __getitem__
raise KeyError(key)
KeyError: '2931928391273123'
C:\Documents and Settings\Administrator\Desktop\twitterImgBot-master>
I looked up all the questions here that has something to do with KeyError but none of them have something to do with the Twitter's API key
Again, the API key which is 2931928391273123 is just a random number to substitute the original one for obvious reasons. I did double check it to make sure I had the correct keys/tokens before resorting to here.
This is also a first for me, so I'm hoping someone can lend me a helping hand! I would have posted the 2 screenshots of the Python file and the cmd but I'm only limited to one link.
Thanks in advance!
Related
Im new to pyflink. Im tryig to write a python program to read data from kafka topic and prints data to stdout. I followed the link Flink Python Datastream API Kafka Producer Sink Serializaion. But i keep seeing NoSuchMethodError due to version mismatch. I have added the flink-sql-kafka-connector available at https://repo.maven.apache.org/maven2/org/apache/flink/flink-sql-connector-kafka_2.11/1.13.0/flink-sql-connector-kafka_2.11-1.13.0.jar. Can someone help me in with a proper example to do this? Following is my code
import json
import os
from pyflink.common import SimpleStringSchema
from pyflink.datastream import StreamExecutionEnvironment
from pyflink.datastream.connectors import FlinkKafkaConsumer
from pyflink.common.typeinfo import Types
def my_map(obj):
json_obj = json.loads(json.loads(obj))
return json.dumps(json_obj["name"])
def kafkaread():
env = StreamExecutionEnvironment.get_execution_environment()
env.add_jars("file:///automation/flink/flink-sql-connector-kafka_2.11-1.10.1.jar")
deserialization_schema = SimpleStringSchema()
kafkaSource = FlinkKafkaConsumer(
topics='test',
deserialization_schema=deserialization_schema,
properties={'bootstrap.servers': '10.234.175.22:9092', 'group.id': 'test'}
)
ds = env.add_source(kafkaSource).print()
env.execute('kafkaread')
if __name__ == '__main__':
kafkaread()
But python doesnt recognise the jar file and throws the following error.
Traceback (most recent call last):
File "flinkKafka.py", line 31, in <module>
kafkaread()
File "flinkKafka.py", line 20, in kafkaread
kafkaSource = FlinkKafkaConsumer(
File "/automation/flink/venv/lib/python3.8/site-packages/pyflink/datastream/connectors.py", line 186, in __init__
j_flink_kafka_consumer = _get_kafka_consumer(topics, properties, deserialization_schema,
File "/automation/flink/venv/lib/python3.8/site-packages/pyflink/datastream/connectors.py", line 336, in _get_kafka_consumer
j_flink_kafka_consumer = j_consumer_clz(topics,
File "/automation/flink/venv/lib/python3.8/site-packages/pyflink/util/exceptions.py", line 185, in wrapped_call
raise TypeError(
TypeError: Could not found the Java class 'org.apache.flink.streaming.connectors.kafka.FlinkKafkaConsumer'. The Java dependencies could be specified via command line argument '--jarfile' or the config option 'pipeline.jars'
What is the correct location to add the jar file?
I see that you downloaded flink-sql-connector-kafka_2.11-1.13.0.jar, but the code loades flink-sql-connector-kafka_2.11-1.10.1.jar.
May be you can have a check
just need to check the path to flink-sql-connector jar
You should add jar file of flink-sql-connector-kafka, it depends on your pyflink and scala version. If versions are true, check your path in add_jars function if the jar package is here.
I am currently working with the Instabot API for python and I ran across the following issue:
I wrote a small program:
from instabot import Bot
bot = Bot()
bot.login(username = "[my username]", password = "[my passowrd]")
bot.follow("lego")
which worked fine after running it for the very first time. However, after running the program for a second time, this time following another account, it raised an error ("KeyError: ds_user").
This error can be fixed by deleting the config folder inside the project folder. Unfortunately, this isn't a very sustainable solution, as it makes working on the code really arduous. I therefore would like to know if there is any solution for getting the program to run multiple times without having to delete the config folder over and over again.
I am receiving the following traceback (code is running in an anaconda environment called "Instagram Automation"):
Traceback (most recent call last):
File "e:/Programme/OneDrive/Dokumente/Projekte/Instagram Automation/main.py", line 4, in <module>
bot.login(username = "[my username]", password = "[my password]")
File "E:\Programme\Anaconda\envs\Instagram Automation\lib\site-packages\instabot\bot\bot.py", line 443, in login
if self.api.login(**args) is False:
File "E:\Programme\Anaconda\envs\Instagram Automation\lib\site-packages\instabot\api\api.py", line 240, in login
self.load_uuid_and_cookie(load_cookie=use_cookie, load_uuid=use_uuid)
File "E:\Programme\Anaconda\envs\Instagram Automation\lib\site-packages\instabot\api\api.py", line 199, in load_uuid_and_cookie
return load_uuid_and_cookie(self, load_uuid=load_uuid, load_cookie=load_cookie)
File "E:\Programme\Anaconda\envs\Instagram Automation\lib\site-packages\instabot\api\api_login.py", line 352, in load_uuid_and_cookie
cookie_username = self.cookie_dict["ds_user"]
KeyError: 'ds_user'
As far as I can see, the only way on your side to fight the symptoms is to always delete the JSON file in the config folder, e.g:
import os
if os.path.isfile("path/to/config/file.json"):
os.remove("path/to/config/file.json")
import instabot
# rest of your code goes here
The developers of instabot should fix the source of the problem, for example by using self.cookie_dict.get("ds_user", "some default value") instead of self.cookie_dict["ds_user"]
I'm new to Slack bots (familiar with Discord.py). I am using the Slackbot package (https://github.com/lins05/slackbot) to create my Python slack bot.
Followed the example on their page, installed the package using pip install slackbot, went to the path of the installation, created a slackbot_settings.py (with specified tags they mentioned) and run.py in the main directory and mybot.py (with example commands they showed on their page to test), but I can't initialize the bot. I tried to run the bot using python run.py but get the following error:
Traceback (most recent call last):
File "run.py", line 23, in
main()
File "run.py", line 20, in main
bot.run()
File "/Users/xxx/anaconda3/lib/python3.5/site-packages/slackbot/bot.py", line 32, in run
self._plugins.init_plugins()
File "/Users/xxx/anaconda3/lib/python3.5/site-packages/slackbot/manager.py", line 31, in init_plugins
self._load_plugins(plugin)
File "/Users/xxx/anaconda3/lib/python3.5/site-packages/slackbot/manager.py", line 47, in _load_plugins
path_name = importlib_find(plugin)
File "/Users/xxx/anaconda3/lib/python3.5/importlib/util.py", line 89, in find_spec
return _find_spec(fullname, parent.path)
AttributeError: module 'mybot' has no attribute 'path'
mybot.py has the following lines:
from slackbot.bot import respond_to
from slackbot.bot import listen_to
import re
#respond_to('hi', re.IGNORECASE)
def hi(message):
message.reply('I can understand hi or HI!')
# react with thumb up emoji
message.react('+1')
#respond_to('I love you')
def love(message):
message.reply('I love you too!')
#listen_to('Can someone help me?')
def help(message):
# Message is replied to the sender (prefixed with #user)
message.reply('Yes, I can!')
# Message is sent on the channel
message.send('I can help everybody!')
# Start a thread on the original message
message.reply("Here's a threaded reply", in_thread=True)
Where am I going wrong? I've tried asking the developer but got no answer.
The bot apparently can not find your mybot plugin. Assuming mybot.py is in the same folder than run.py change the entry in PLUGINS to 'mybot'. Then it should work.
Full example of slackbot_settings.py:
DEFAULT_REPLY = "Sorry but I didn't understand you"
PLUGINS = [
'mybot'
]
I've created a standalone exe Windows service written in Python and built with pyInstaller. When I try to import wmi, an exception is thrown.
What's really baffling is that I can do it without a problem if running the code in a foreground exe, or a foreground python script, or a python script running as a background service via pythonservice.exe!
Why does it fail under this special circumstance of running as a service exe?
import wmi
Produces this error for me:
com_error: (-2147221020, 'Invalid syntax', None, None)
Here's the traceback:
Traceback (most recent call last):
File "<string>", line 43, in onRequest
File "C:\XXX\XXX\XXX.pyz", line 98, in XXX
File "C:\XXX\XXX\XXX.pyz", line 31, in XXX
File "C:\XXX\XXX\XXX.pyz", line 24, in XXX
File "C:\XXX\XXX\XXX.pyz", line 34, in XXX
File "C:\Program Files (x86)\PyInstaller-2.1\PyInstaller\loader\pyi_importers.py", line 270, in load_module
File "C:\XXX\XXX\out00-PYZ.pyz\wmi", line 157, in <module>
File "C:\XXX\XXX\out00-PYZ.pyz\win32com.client", line 72, in GetObject
File "C:\XXX\XXX\out00-PYZ.pyz\win32com.client", line 87, in Moniker
wmi.py line 157 has a global call to GetObject:
obj = GetObject ("winmgmts:")
win32com\client__init.py__ contains GetObject(), which ends up calling Moniker():
def GetObject(Pathname = None, Class = None, clsctx = None):
"""
Mimic VB's GetObject() function.
ob = GetObject(Class = "ProgID") or GetObject(Class = clsid) will
connect to an already running instance of the COM object.
ob = GetObject(r"c:\blah\blah\foo.xls") (aka the COM moniker syntax)
will return a ready to use Python wrapping of the required COM object.
Note: You must specifiy one or the other of these arguments. I know
this isn't pretty, but it is what VB does. Blech. If you don't
I'll throw ValueError at you. :)
This will most likely throw pythoncom.com_error if anything fails.
"""
if clsctx is None:
clsctx = pythoncom.CLSCTX_ALL
if (Pathname is None and Class is None) or \
(Pathname is not None and Class is not None):
raise ValueError("You must specify a value for Pathname or Class, but not both.")
if Class is not None:
return GetActiveObject(Class, clsctx)
else:
return Moniker(Pathname, clsctx)
The first line in Moniker(), i.e. MkParseDisplayName() is where the exception is encountered:
def Moniker(Pathname, clsctx = pythoncom.CLSCTX_ALL):
"""
Python friendly version of GetObject's moniker functionality.
"""
moniker, i, bindCtx = pythoncom.MkParseDisplayName(Pathname)
dispatch = moniker.BindToObject(bindCtx, None, pythoncom.IID_IDispatch)
return __WrapDispatch(dispatch, Pathname, clsctx=clsctx)
Note: I tried using
pythoncom.CoInitialize()
which apparently solves this import problem within a thread, but that didn't work...
I also face the same issue and I figure out this issue finally,
import pythoncom and CoInitialize pythoncom.CoInitialize (). They import wmi
import pythoncom
pythoncom.CoInitialize ()
import wmi
I tried solving this countless ways. In the end, I threw in the towel and had to just find a different means of achieving the same goals I had with wmi.
Apparently that invalid syntax error is thrown when trying to create an object with an invalid "moniker name", which can simply mean the service, application, etc. doesn't exist on the system. Under this circumstance "winmgmts" just can't be found at all it seems! And yes, I tried numerous variations on that moniker with additional specs, and I tried running the service under a different user account, etc.
Honestly I didn't dig in order to understand why this occurs.
Anyway, the below imports solved my problem - which was occurring only when ran from a Flask instance:
import os
import pythoncom
pythoncom.CoInitialize()
from win32com.client import GetObject
import wmi
The error "com_error: (-2147221020, 'Invalid syntax', None, None)" is exactly what popped up in my case so I came here after a long time of searching the web and voila:
Under this circumstance "winmgmts" just can't be found at all it
seems!
This was the correct hint for because i had just a typo , used "winmgmt:" without trailing 's'. So invalid sythax refers to the first methods parameter, not the python code itself. o_0 Unfortunately I can't find any reference which objects we can get with win32com.client.GetObject()... So if anybody has a hint to which params are "allowed" / should work, please port it here. :-)
kind regards
ChrisPHL
During my pandas/Google Analytics API setup, I basically did everything as described in this link:
http://blog.yhathq.com/posts/pandas-google-analytics.html
The client_secrets.json is in the pandas/io folder. When i now try to execute a statement of the form
>>>from pandas.io import ga
>>>df = ga.read_ga(metrics, dimensions, start_date)
the following error occurs:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "\Anaconda\lib\site-packages\pandas\io\ga.py", line 110, in read_ga
reader = GAnalytics(**reader_kwds)
File "\Anaconda\lib\site-packages\pandas\io\ga.py", line 179, in __init__
self._service = self._init_service(secrets)
File "\Anaconda\lib\site-packages\pandas\io\ga.py", line 191, in _init_service
http = self.authenticate(secrets)
File "\Anaconda\lib\site-packages\pandas\io\ga.py", line 151, in authenticate
return auth.authenticate(flow, self.token_store)
File "\Anaconda\lib\site-packages\pandas\io\auth.py", line 108, in authenticate
credentials = tools.run(flow, storage)
AttributeError: 'module' object has no attribute 'run'
According to the yhat link, my browser should open for authentication.
Note: I did not not create the Client ID for "installed application", since I did not have this choice in the menu when creating the ID. Instead, i chose "other". This shouldn't be the cause of the error, though.
Second Note: I recently updated my pandas to 0.17.1. When importing pandas.io.ga, i got the message that the .ga module is deprecated. Furthermore, i manually installed the gflags module, because it was needed when I tried to import .io.ga the first time.
Either file a ticket with the owners of Pandas to change (currently) line 108 of pandas/io/auth.py from run() to run_flow(), or make the fix yourself and file a PR. (Yes, it would've been nice if Google had just made run_flow() and alias of run(), but as you can imagine, this is not how this change evolved, so we have to live with it.)
For other developers running into this error: If you have the latest version (as of Feb 2016) of the Google APIs Client Library for Python, just rename your call from tools.run() to tools.run_flow(), and you should be good-to-go. More about this change in a PSA (public service announcement) blogpost I wrote back in mid-2015 but update periodically to stay current.
The fastest way to upgrade your Client Library is with:
pip install -U google-api-python-client # or pip3 for 3.x