Develop Reference

ModuleNotFoundError: No module named 'simpleaudio'

Basically, I recently started Python. I'm working on a project where I need audio to play. I searched up some libraries that can play audio and tried simpleaudio. I'm using Windows and sucessfull installed simpleaudio using: pip3 install simpleaudio.
However, when I tried to use simpleaudio in my project with import simpleaudio as sa, it gives me this error:
Traceback (most recent call last):
File "d:\coding\python\python projects\random tests\soundtest.py", line 1, in
import simpleaudio as sa
ModuleNotFoundError: No module named 'simpleaudio'
Any idea what is wrong?

After I installed simpleaudio, import simpleaudio as sa worked with no errors. I've run into similar errors before, and it was always because the version of pip I was using and the Python interpreter I was using didn't match. You probably need to either switch to using the same interpreter as pip3 or install the package for whatever interpreter you're using

The most probable issue is the use of differing version of python. For instance if you use pip3 it is for python3 only
Since the module was not found try
pip install simpleaudio
and then importing again

It's possible you installed the library for python2 instead of python3. In ubuntu pip is python2 and pip3 is python3- I'm not sure if that's the case on windows or not.

No module named 'tensorflow.python.tools'; 'tensorflow.python' is not a package

Everything was working smoothly until I started getting the following error:
Traceback (most recent call last):
File "", line 1, in
File "/home/user/Workspace/Practices/Tensorflow/tensorflow2/venv/lib/python3.7/site-packages/tensorflow/init.py", line 98, in
from tensorflow_core import *
File "/home/user/Workspace/Practices/Tensorflow/tensorflow2/venv/lib/python3.7/site-packages/tensorflow_core/init.py", line 40, in
from tensorflow.python.tools import module_util as _modle_util
ModuleNotFoundError: No module named 'tensorflow.python.tools'; 'tensorflow.python' is not a package
My environment setup:
python-3.7
Using venv module to create virtual environment
tensorflow 2.0.0
pip 19.0.3
Manjaro Linux
Now, I even can't import tensorflow module as well. It gives same above error. Tried reinstalling with cache and without cache as well, but no luck. Recreated virtual environment as well, no luck. This is really weird and have no clue where to start troubleshooting as well. Looking at virtual environment site packages, everything seems fine.

I just faced this problem right now. I ran the source code on another computer and it showed the same error. I went ahead and compared the version of TensorFlow and turns out that the other computer was running tensorflow==2.1.0 and mine was running tensorflow==1.14.0.
In short, downgrade your tensorflow installation (pip install tensorflow==1.14.0)

Found a noob problem. I was using my file name as csv.py which already exist in python library, which I think was messing up the paths. But don't know how yet.

Try uninstalling and reinstalling. First run:
pip uninstall tensorflow
then reinstall:
pip install tensorflow==2.0
After you uninstall, in the python shell, run:
help('modules')
TensorFlow should not be there in that list. Only then proceed to install it.

You don't need to uninstall tensorflow what version you have because it will take time to reinstall. You can fix this issue just by installing tensorflow==2.0.
pip install tensorflow==2.0

How do I fix the issue "ModuleNotFoundError: No module named 'sklearn'

I'm using a Mac. I have Anaconda installed. When I type import numpy or import matplotlib I don't run into any issues. The only issue I'm having is with sklearn.
I'm fairly new to CS/ DS. Any help/ tips is greatly appreciated.
I've tried uninstalling sklearn and reinstalling. I've pretty much tried every solution on StackOverflow. The only thing I haven't tried is reinstalling anaconda.
import sklearn
Traceback (most recent call last):
File "", line 1, in
import sklearn
ModuleNotFoundError: No module named 'sklearn'
I expect to get no result just like with matplotlib and numpy which means everything works, but in lieu of that I get that output.

Do you have sklearn installed? It should be in some requirement, but it seems that someone needs it as a dependency and does not find it.
pip freeze | grep sklearn
It will tell you if you have it installed.
Do you work in a virtualenv?
If you do not have it installed try to do it and if not, pass the traceback.
if you work on mac you can also try updating xcode and updating yourself pip
xcode-select --install
pip install --upgrade pip

ImportError: Missing required dependencies ['numpy']

I was able to run all scripts successfully which is using pandas , but suddenly all my PANDAS SCRIPTS are giving this error :
Traceback (most recent call last):
File "data_visulaization.py", line 5, in
import pandas as pd
File "/usr/lib64/python2.7/site-packages/pandas/init.py", line 18,
in
raise ImportError("Missing required dependencies {0}".format(missing_dependencies))
ImportError: Missing required dependencies ['numpy']
Recently i have not installed or updated any new things.
Does anyone have a solution for this?
I uninstalled pandas and numpy and re-installed them but still facing the same issue.

I got this issue on Rasberry PI and found that the root cause was missing library:
import numpy
...
ImportError: libf77blas.so.3: cannot open shared object file: No such file or directory
Then it takes few minute to google the required library source:
sudo apt-get install libatlas-base-dev
I have not checked the solution on any other Linux-es but likely the same method should be applicable. So try to import the faulty library first and see what is missing.

I faced the exact same error and found that I had created a file named 'random.pyc' by mistake in the same directory as that of my PyCharm environment
ayush#ayush-VirtualBox:~/PycharmProjects/untitled$ where "untitled" refers to my project directory. I deleted it and everything fells into place. Hope this helps !
The reason for this was numpy Imports another file called Random by default for building its own dependencies and it mistook my 'random.pyc' for it and replaced it.

I had the same error. Fixed with the following:
python3 -m pip uninstall numpy
python3 -m pip install numpy==1.14.0

use"conda install numpy" in cmd-window if you used Anaconda in your machine. I had encount this problem also and I resolved it by this. May it can help U.

I found the solution , the actual problem is if any of your recent python scripts have generated ".pyc" extension file this error will occur .
solution is to delete those files that's all.

If you are using packages options and it contains pandas or some package depends numpy, you should add required dependencies to the packages.

pip uninstall numpy
pip install numpy
It works

This error will occur when multiple versions of numpy are installed. Check to make sure you only have one version of numpy installed. You can make a test file to check this if you don't want to look through the directories:
import numpy
print("Numpy imported")
If you get an error saying that multiple versions of numpy were detected, then you have multiple versions of numpy installed.
You can fix this by repeatedly calling (not just once)
pip uninstall numpy
until all versions are uninstalled and then use
pip install numpy
to get only the latest version.

try uninstalling pandas and numpy:
pip uninstall pandas
pip uninstall numpy
and install them back:
pip install pandas
pip install numpy

Importing opencv and getting numpy.core.multiarray failed to import

Trying to install OpenCV and running into an issue where attempting to import cv2 results in this output -
RuntimeError: module compiled against API version 9 but this version of numpy is 7
Traceback (most recent call last):
File "<pyshell#4>", line 1, in <module>
import cv2
ImportError: numpy.core.multiarray failed to import
I'm running on Windows 7 x64, Python v 2.7.9
Thanks!

The error is telling you that you have an out of date version of numpy. If you used pip to install things you can simply run pip install numpy -U, or download the appropriate version from their website.

In case
pip install -U numpy
doesn't work (even with sudo), you may want to make sure you're using the right version of numpy. I had the same "numpy.core.multiarray failed to import" issue, but it was because I had 1.6 installed for the version of Python I was using, even though I kept installing 1.8 and assumed it was installing in the right directory.
I found the bad numpy version by using the following command in my Mac terminal:
python -c "import numpy;print numpy.version;print numpy.file";
This command gave me the version and location of numpy that I was using (turned out it was 1.6.2). I went to this location and manually replaced it with the numpy folder for 1.8, which resolved my "numpy.core.multiarray failed to import" issue. Hopefully someone finds this useful!

I had a similar problem and I solved it by downgrading my numpy version.
What I did was:
pip install opencv-python
pip uninstall numpy
pip install numpy=1.18
This has worked for me using
Python 3.7
opencv-python 4.4.0.46
numpy 1.18.0

linux: sudo apt-get install python-numpy

if you are using ubuntu bionic beaver then try running: sudo apt-get install python-numpy
had the same issue, resolve by running the above command.
Hope it helps

In your environment you can try this command:
conda uninstall numpy
conda install -c conda-forge numpy

I use Python 3.7 # RPI 4.
For opencv to install properly I had to install the listed libraries below.
(Not every package was actually installed, after request)
Regarding Numpy, I think one should stick to the latest version.
For me what worked is to uninstall the existing version 1.16.2 and stick with the current stable 1.21.2.
Stackoverflow topic at missing libraries here: ImportError: libcblas.so.3: cannot open shared object file: No such file or directory.