I keep getting this error: <type 'exceptions.ImportError'> cannot import name get_cert_infos.
I'm pretty sure I'm importing everything correctly. The file with the problem is participant.py and has:
from datetime import date
from widgets import SelectOrAdd, LabelSortedOptionsWidget, DynamicSelect, \
AutocompleteReferenceWidget
from communication import handle_notification, send_email
from utility import create_temp_password, hash_password
from export import get_cert_infos, build_certificate
I have exports.py and the get_cert_infos and build_certificate methods do exist inside of there. I don't understand what the problem is.
I looked at several of the other posts on this and they all seem to be saying that this is most likely a circular import problem
I have export installed and updated export==0.1.2
ImportError: Cannot import name X
Try double checking the spelling, I know it's dumb, but it happens.
if it's not that, try writing this method in export
def hello_world():
print 'hello world'
then
import export
export.hello_world()
if that works, it may be something wrong with the method itself, if it doesn't I imagine that the name export is reserved and is causing conflicts (my code editor doesn't mark it as reserved tho).
is it necessary to import only those two methods? or could you import the whole module and use the needed methods as in the case of the hello_world? does that cause you troubles? if you delete get_cert_infos does build_certificate give you any troubles?
Related
For some reason, I had to change a module name from A.py to 0880ceae-8a46-11eb-bcf6-38f9d349be8e.py. 0880ceae-8a46-11eb-bcf6-38f9d349be8e.py is a uid generated by uuid.uuid1().
After my change, I try to import a class B from the py file by the following two ways, both do not work out.
First solution is to import directly
from 0880ceae-8a46-11eb-bcf6-38f9d349be8e import B
It has an error SyntaxError: invalid token
Second solution is to define a variable before import
uid = '0880ceae-8a46-11eb-bcf6-38f9d349be8e'
from uid import Model_API
And it has en error ModuleNotFoundError: No module named 'uid'
Anyone has a good idea? Thanks.
Here is possible solution to your problem tested using python3:
# Modern approach
import importlib
module = importlib.import_module(".", "0880ceae-8a46-11eb-bcf6-38f9d349be8e")
module.hello()
# Deprecated way
module = __import__("0880ceae-8a46-11eb-bcf6-38f9d349be8e")
module.hello()
Both of the above methods are tested and works.
Here are the rules to keep in mind:
Check your filename should end with .py extension, .py.py will cause ModuleNotFoundError.
Make sure to not include .py extension while using in importlib module.
I'm not sure why it won't work, it may be an issue that you can't work around, but I would just like to know why it won't work. I am sorry if I waste your time, or didn't ask the question properly, I'm 16 and new to Python kind of.
in main.py
from day_one import day_one_def
in day_one.py
from main import main_home_window
error message
ImportError: cannot import name 'day_one'
It looks like you have a circular import: main imports from day_one and day_one imports from main. This isn't really how python is supposed to work. You should create linear dependencies, where the top module only relies on the ones below it, which only rely on the ones below them, etc.
In Python 2.7, I'm getting
'module' has no attribute
, and/or
'name' is not defined
errors when I try to split up a large python file.
(I have already read similar posts and the Python modules documentation)
Say you have a python file that is structured like this:
<imports>
<50 global variables defined>
<100 lengthy functions that each use most or all of the globals
defined above, and also call each other>
<main() that calls some of the functions and uses the globals>
So I can easily categorize groups of functions together, create a python file for each group, and put them there. The problem is whenever I try to call any of them from the main python file, I get the errors listed above. I think the problem is related to circular dependencies. Since all of the functions rely on the globals, and each other, they are circularly dependent.
If I have main_file.py, group_of_functions_1.py, and group_of_functions_2.py,
main_file.py will have:
import group_of_functions_1.py
import group_of_functions_2.py
and group_of_functions_1.py will have
import main_file.py
import group_of_functions_2.py
and group_of_functions_2.py will have
import main_file.py
import group_of_functions_1.py
Regardless of whether I use "import package_x" or "from package_x import *" the problem remains.
If I take the route of getting rid of the globals, then most of the functions will have 50 parameters they will be passing around which then also need to be returned
What is the right way to clean this up?
(I have already read similar posts and the Python modules documentation)
One of the sources of your errors is likely the following:
import group_of_functions_1.py
import group_of_functions_2.py
When importing, you don't add .py to the end of the module name. Do this instead:
import group_of_functions_1
import group_of_functions_2
Not sure this is possible, but would like to know if there are any suggestions.
Say I have a file foo.py which looks like
import doesnotexist
bar = "Hello, World!"
I want to do a from foo import bar, but this will fail due to the import not existing in the scope of this new file.
One way of doing this is putting bar in a new file called bar.py and have foo.py also import that, but would like to skip that if possible.
Any ideas?
There is no way to import only part of a module - Python will load the entire module before pulling the parts you asked for.
As mentioned in the comments, you can capture the import error inside the module and ignore it. Your code will then generate an error if you try to use the module that didn't import.
try:
import doesnotexist
except ImportError:
pass
bar = "Hello, World!"
So my first python program, I downloaded the macholib package from PYPI, then unzipped it and ran installed the setup.py using python install, now I'm trying to run a program where I first import the macholib, then when I try to access methods like Macho, it gives me an error saying macholib module has no attributes called Macho.
My understanding is macholib is a package and not a module or something, hence I cant use the contents of the package.
Please answer, I've wasted too much time on such a simple newbie issue.
running a mac with the latest version of python.
Code:
import sys
import macholib
MachO(DivXInstaller.dmg)
I tried macholib.MachO(DivXInstaller.dmg) and macholib.MachO.MachO(DivXInstaller.dmg)
Error for python test.py
Traceback (most recent call last):
File "test.py", line 3, in <module>
MachO(DivXInstaller.dmg)
NameError: name 'MachO' is not defined
You have this line in your code:
MachO(DivXInstaller.dmg)
However, the name MachO is not defined anywhere. So Python tells you this with the error
NameError: name 'MachO' is not defined
If you want to use the MachO module under the name MachO, you have to import it:
from macholib import MachO
This you have not done, which is the cause of your error. All you did was
import macholib
which gives you the name "macholib" that you can use. However, macholib contains mostly submodules which you can not access like that, so that is not particularly useful. If you don't want to pollute the namespace, you can import MachO as
import machlibo.MachO
Which gives you access to the MachO module as macholib.MachO
You haven't defined DivXInstaller.dmg either, so that's going to be your next error. I recommend that you go through a Python tutorial before you start programming in it.
An import statement defines a namespace. Hence, in order to use something defined in the module or package, you need to qualify it. In this case, the module itself is macholib.MachO but you need to dig deeper, to the actual class MachO which, slightly confusingly, has the same name, so you need to import macholib.MachO and use macholib.MachO.MachO (note that when I try to do this I get an error "DistributionNotFound: altgraph", however).
Note further that it takes a filename as an argument, which is a string. Moreover, you are actually creating an instance of a class, so you probably mean
mlib = macholib.MachO.MachO("DivXInstaller.dmg")
where now mlib is actually the object you need to manipulate with further calls...
Alternately you can do from macholib import MachO or even from macholib.MachO import MachO so you could use MachO.MachO(...) or MachO(...) directly.
This is so simple if you understand Python Packages vs. Modules and import vs. from import:
A Python module is simply a Python source file.
A Python package is simply a directory of Python module(s).
1- import:
import package1.package2.module1
To access module1 classes, functions or variables you should use the whole namespace: package1.package2.modlue1.class1
You cannot import a class or function this way: (wrong)
import package1.package2.class1
2- from ... import
Instead use "from" to import a single class, function or variable of a module:
from package1.package2.module1 import class1
no need to address the whole namespace: class1.method1() works now
Note that you cannot import a method of a class this way
Example:
datetime is a class of module datetime that has a method called utcnow(), to access utcnow() one could:
import datetime
datetime.datetime.utcnow()
Or
from datetime import datetime
datetime.utcnow()