I'm trying to write a Python program that can browse directories and grab files w/ sockets if the client connects to the server. The browsing part works fine, it prints out all directories of the client.
Here's a part of the code:
with clientsocket:
print('Connected to: ', addr)
while True:
m = input("Command > ")
clientsocket.send(m.encode('utf-8'))
data = clientsocket.recv(10000)
if m == "exit":
clientsocket.close()
if m.split()[0] == 'get':
inp = input("Filename > ")
while True:
rbuf = clientsocket.recv(8192)
if not rbuf:
break
d = open(inp, "ab")
d.write(rbuf)
d.close()
elif data.decode('utf-8').split()[0] == "LIST":
print(data.decode('utf-8'))
if not data:
break
However, the problem lies in here:
if m.split()[0] == 'get':
inp = input("Filename > ")
while True:
rbuf = clientsocket.recv(8192)
if not rbuf:
break
It seems to be stuck in an infinite loop. What's more interesting is that the file I'm trying to receive is 88.3kb, but what the file returns is 87kb while it's in the loop, which is very close...
I tried receiving a python script at one time as well (without the loop) and it works fine.
Here's some of the client code:
while True:
msg = s.recv(1024).decode('utf-8')
if msg.split()[0] == "list":
dirs = os.listdir(msg.split()[1])
string = ''
for dira in dirs:
string += "LIST " + dira + "\n"
s.send(string.encode('utf-8'))
elif msg == "exit":
break
else:
#bit that sends the file
with open(msg.split()[1], 'rb') as r:
s.sendall(r.read())
So my question is, why is it getting stuck in an infinite loop if I have it set up to close when there is no data, and how can I fix this?
I'm sort of new to network programming in general, so forgive me if I miss something obvious.
Thanks!
I think I know what's the problem, but I may be wrong. It happened to me several times, that the entire message is not received in one recv call, even if I specify the correct length. However, you don't reach the end of stream, so your program keeps waiting for remaining of 8192 bytes which never arrives.
Try this:
Sending file:
#bit that sends the file
with open(msg.split()[1], 'rb') as r:
data = r.read()
# check data length in bytes and send it to client
data_length = len(data)
s.send(data_length.to_bytes(4, 'big'))
s.send(data)
s.shutdown(socket.SHUT_RDWR)
s.close()
Receiving the file:
# check expected message length
remaining = int.from_bytes(clientsocket.recv(4), 'big')
d = open(inp, "wb")
while remaining:
# until there are bytes left...
# fetch remaining bytes or 4094 (whatever smaller)
rbuf = clientsocket.recv(min(remaining, 4096))
remaining -= len(rbuf)
# write to file
d.write(rbuf)
d.close()
There are several issues with your code.
First:
clientsocket.send(m.encode('utf-8'))
data = clientsocket.recv(10000)
This causes the file to be partially loaded to data variable when you issue get statement. That's why you don't get full file.
Now this:
while True:
rbuf = clientsocket.recv(8192)
if not rbuf:
break
...
You indeed load full file but the client never closes the connection (it goes to s.recv() after sending the file) so if statement is never satisfied. Thus this loop gets blocked on the clientsocket.recv(8192) part after downloading the file.
So the problem is that you have to somehow notify the downloader that you've sent all the data even though the connection is still open. There are several ways to do that:
You calculate the size of the file and send it as a first few bytes. For example, say the content of the file is ala ma kota. These are 11 bytes and thus you send \x11ala ma kota. Now receiver knows that first byte is size and it will interpret it as such. Of course one byte header isn't much (you would only be able to send max 256 byte files) so normally you go for for example 4 bytes. So now your protocol between client and server is: first 4 bytes is the size of the file. Thus our initial file would be sent as \x0\x0\x0\x11ala ma kota. The drawback of this solution is that you have to know the size of the content before sending it.
You mark the end of the stream. So you pick a particular character, say X and you read the straem until you find X. If you do then you know that the other side sent everything it has. The drawback is that if X is in the content then you have to escape it, i.e. additional content processing (and interpretation on the other side) is needed.
Related
I have been working on making my own cloud storage, but after receiving my file data, it doesn't break the while-loop. It does not proceed to the print statement where it says the file has been downloaded and waits for more data from the server.
Here is the code part where it receives the file data:
if console == "download":
s.send(bytes("download","utf-8"))
file_name = input("Enter the file name: ")
s.send(bytes(file_name,"utf-8"))
print(f"[DOWNLOADING] Downloading {file_name}")
f = open(file_name,'wb')
while(True):
l = s.recv(1024)
f.write(l)
if not l:
break
print(f"[DOWNLOADED] Downloaded {file_name}")
socket.recv is a blocking call.
socket.recv(1024) will read at most 1024 bytes, blocking if no data is waiting to be read. If you don't read all data, an other call to socket.recv won't block.
socket.recv will also end with an empty string if the connection is closed or there is an error.
If you want a non-blocking socket, you can use the select module (a bit more complicated than just using sockets) or you can use socket.setblocking.
I'm trying to send an image's binary data from the server (after I opened the image file as 'rb') to the client:
This is the server-side: sending the image binary data in pieces to the client:
BUFSIZ = 262144 #max tcp length
while len(pic_data) > BUFSIZ:
client.send(pic_data[:BUFSIZ])
print len(pic_data[:BUFSIZ])
pic_data = pic_data[BUFSIZ:]
if len(pic_data) <= BUFSIZ:
client.send(pic_data)
print len(pic_data)
client.send("alldone") #telling the client he finished
The client-side is receiving the info in pieces and saving the whole binary data as a file on the computer:
pic_data = ""
r = client_socket.recv(BUFSIZ)
while r != "alldone":
pic_data += r
r = client_socket.recv(BUFSIZ)
print len(r)
print str(questions_data[count][0])
print len(pic_data)
if r == "alldone":
filepath = "C:\Users\hilab\PycharmProjects\dafyProject\\pic" + str(questions_data[count][0]) +
".jpg"
with open(filepath, 'wb') as file:
file.write(pic_data)
questions_data[count][0] grows +1 for every image that's sent
However, if an image's binary-data length is more than BUFSIZ (262144), the image isn't successfully saved and the program gets stuck.
I suspect that somehow the 'alldone' message is added to the pic_data variable (cause I've noticed that if I change the final message from 'alldone' to a message with different length - the length of the last piece of the image binary-data that's accepted by the client changes as well)
Do you know what the problem is? how can I fix it?
messages sent using tcp might be added or split in the sending process. What I would do is add to each message its length at the beginning (8 digits will defiantly do if you want to be safe, it must be constant though). On the client-side, you will have to first receive a message in the length of 8, interpret the size of the incoming message, and then use the recv() function with the length you just read. That way you can make sure each message is received fully and wasn't added to another message.
The following codes let me download from server to client three files called tmp.bsp, tmp.seq and tmp.dms. However, just the first file tmp.dms is completely downloaded. The other one tmp.seq is filled up with the informations of tmp.bsp and tmp.bsp stay 0KB.
client:
import socket
import socket
skClient = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
skClient.connect(("127.0.0.1",2525))
sData = "Temp"
sData2 = "Temp"
sData3 = "Temp"
while True:
sData = skClient.recv(1024)
fDownloadFile = open("tmp.dms","wb")
sData2 = skClient.recv(1024)
fDownloadFile2 = open("tmp.seq","wb")
sData3 = skClient.recv(1024)
fDownloadFile3 = open("tmp.bsp","wb")
while sData:
fDownloadFile.write(sData)
sData = skClient.recv(1024)
fDownloadFile.close()
fDownloadFile2.write(sData2)
sData2 = skClient.recv(1024)
fDownloadFile2.close()
fDownloadFile3.write(sData3)
sData3 = skClient.recv(1024)
fDownloadFile3.close()
print "Download over"
break
skClient.close()
n is a counter and the prints are for debugging.
sFileName is to download one file, and used to work but since I want three files I just commented it.
server:
import socket
host = ''
skServer = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
skServer.bind((host,2525))
skServer.listen(10)
print "Server currently active"
while True:
Content,Address = skServer.accept()
print Address
files = "C:\Users\Name_user\Desktop\Networking\Send_Receive/"
fUploadFile = open(files+str('tmp.dms'),"rb")
sRead = fUploadFile.read(1024)
fUploadFile2 = open(files+str('tmp.seq'),"rb")
sRead2 = fUploadFile2.read(1024)
fUploadFile3 = open(files+str('tmp.bsp'),"rb")
sRead3 = fUploadFile3.read(1024)
while sRead:
Content.send(sRead)
sRead = fUploadFile.read(1024)
Content.send(sRead2)
sRead2 = fUploadFile2.read(1024)
# Content.send(sRead3)
# sRead3 = fUploadFile3.read(1024)
Content.close()
print "Sending is over"
break
skServer.close()
files I'm using:
server2.py is my server
Execution
The main issue with your code is that you're sending / receiving an arbitrary number of data. If your buffer (1024) is smaller than the file size then the client's file will contain less information, and if it's larger the file may contain more information (data from the next file).
You could solve this issue by sending a value that signifies the end of a file. The problem with this method is that this value can't be contained in any file, and the client must be scanning the received data for this value.
Another possible solution is to calculate the file size and send that infomation in front of the file data. This way the cilent will know how many data to expect for each file.
Using struct.pack we can create a minimal four bytes header with the file size.
def send_file(soc, path):
with open(path, 'rb') as f:
data = f.read()
size = struct.pack('!I', len(data))
soc.send(size + data)
Tthen the client can get the file size by reading four bytes and unpacking to int.
def recv_file(soc, path):
size_header = soc.recv(4)
size = struct.unpack('!I', size_header)[0]
data = soc.recv(size)
with open(path, 'wb') as f:
f.write(data)
Note that sending/receiving files with one call may raise a socket error if the file size is larger than the socket buffer. In that case you'll have to read the data in smaller chunks in a loop, or increase the buffer size with socket.setsockopt.
Here is a modified version of the above functions that can handle large files:
import struct
import os.path
def send_file(soc, path):
file_size = os.path.getsize(path)
size_header = struct.pack('!Q', file_size)
soc.send(size_header)
with open(path, 'rb') as f:
while True:
data = f.read(1024)
if not data:
break
soc.send(data)
def recv_file(soc, path):
size_header = soc.recv(8)
file_size = struct.unpack('!Q', size_header)[0]
chunks = [1024 for i in range(file_size / 1024)]
with open(path, 'wb') as f:
for chunk in chunks:
f.write(soc.recv(chunk))
f.write(soc.recv(file_size % 1024))
I haven't tested this code thoroughly, but it should work for files of any size.
An example using the send_file function in your server:
host = ''
skServer = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
skServer.bind((host,2525))
skServer.listen(10)
print "Server currently active"
Content,Address = skServer.accept()
print Address
files = ['tmp.bsp', 'tmp.seq', 'tmp.dms']
for file in files:
send_file(Content, file)
Content.close()
print "Sending is over"
skServer.close()
Using recv_file in the client:
skClient = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
skClient.connect(("127.0.0.1",2525))
files = ['tmp.bsp', 'tmp.seq', 'tmp.dms']
for file in files:
recv_file(skClient, file)
print "Download over"
skClient.close()
Yes you are right, I did run your program and found exactly same issue. I dont have enough time to work more on this issue but I found few key points which might lead you to the right work around.
https://docs.python.org/2/howto/sockets.html
The above official doc says:
When a recv returns 0 bytes, it means the other side has closed (or is in the process of closing) the connection. You will not receive any more data on this connection. Ever. You may be able to send data successfully
This is what it is happening when the third file returns 0 bytes.
But why 2nd and 3rd file is merged, I guess its because sockets are just buffered files and we might need to try making sure buffer is clear before sending another.
Read this,
Now there are two sets of verbs to use for communication. You can use send and recv, or you can transform your client socket into a file-like beast and use read and write. The latter is the way Java presents its sockets. I’m not going to talk about it here, except to warn you that you need to use flush on sockets. These are buffered “files”, and a common mistake is to write something, and then read for a reply. Without a flush in there, you may wait forever for the reply, because the request may still be in your output buffer.
But if you plan to reuse your socket for further transfers, you need to realize that there is no EOT on a socket. I repeat: if a socket send or recv returns after handling 0 bytes, the connection has been broken. If the connection has not been broken, you may wait on a recv forever, because the socket will not tell you that there’s nothing more to read (for now). Now if you think about that a bit, you’ll come to realize a fundamental truth of sockets: messages must either be fixed length (yuck), or be delimited (shrug), or indicate how long they are (much better), or end by shutting down the connection. The choice is entirely yours, (but some ways are righter than others).
Hope this helps.
I'm not totally fluent in Python, but I think your while statement should be something like:
while: sData or sData2 or sData3
I may have the syntax wrong, but currently it looks like you will stop when "sData" is done and stop downloading sData2 and aData3 at that time even if they haven't finished.
Hmm--either that or the "While" isn't looping at all and it's just being used as an "if"? hard to tell without knowing the API.
I am not sure if this topic have been answered or not, if was I am sorry:
I have a simple python script the sends all files in one folder:
Client:
import os,sys, socket, time
def Send(sok,data,end="292929"):
sok.sendall(data + end);
def SendFolder(sok,folder):
if(os.path.isdir(folder)):
files = os.listdir(folder);
os.chdir(folder);
for file_ in files:
Send(sok,file_);#Send the file name to the server
f = open(file_, "rb");
while(True):
d = f.read();#read file
if(d == ""):
break;
Send(sok, d, "");#Send file data
f.close();
time.sleep(0.8);#Problem here!!!!!!!!!!!
Send(sok,"");#Send termination to the server
time.sleep(1);#Wait the server to write the file
os.chdir("..");
Send(sok,"endfile");#let the server know that we finish sending files
else:
Send("endfile")#If not folder send termination
try:
sok1 = socket.socket();
sok1.connect(("192.168.1.121",4444))#local ip
time.sleep(1);
while(True):
Send(sok1,"Enter folder name to download: ");
r = sok1.recv(1024);
SendFolder(sok1,r);
time.sleep(0.5);
except BaseException, e:
print "Error: " + str(e);
os._exit(1);
Server:
import sys,os,socket,time
# receive data
def Receive(sock, end="292929"):
data = "";
while(True):
if(data.endswith(end)):
break;
else:
data = sock.recv(1024);
return data[:-len(end)];#return data less termination
def FolderReceive(sok):
while(True):
r = Receive(sok);# recv filename or folder termination("endfile")
if(r == "endfolder"):
print "Folder receive complete.";
break;
else:
filename = r;#file name
filedata = Receive(sok);# receive file data
f = open(filename,"wb");
f.write(filedata);
f.close();#finish to write the file
print "Received: " + filename;
try:
sok1 = socket.socket();
sok1.bind(("0.0.0.0",4444));
sok1.listen(5);
cl , addr = sok1.accept();#accepts connection
while(True):
r = Receive(cl);
sys.stdout.write("\n" + r);
next = raw_input();
cl.sendall(next);#send folder name to the client
FolderReceive(cl);
except BaseException, e:
print "Error: " + str(e);
os._exit(1);
I know this not best server ever...but is what I know. This just work for a folder with small files because if I send big files(like 5mb...) it crashes because the time the client waits for the server is not enough.
So my question is how can I send the files to the server without client need to wait??or know exactly how many time the client needs to wait for the server to receive the file?? Some code that does the same but handling any file size, any help?
TCP sockets are byte streams, not message streams. If you want to send a series of separate messages (like your separate files), you need to define a protocol, and then write a protocol handler. There is no way around that; just guessing at the timing or trying to take advantage of packet boundaries cannot possibly work.
The blog post linked above shows one way to do it. But you can do it with string delimiters if you want. But you have to deal with two problems:
The delimiter can appear anywhere in a read packet, not just at the end.
The delimiter can be split on packet boundaries—you may get "2929" at the end of one read, and the other "29" at the start of the next.
The usually way you do that is to accumulate a buffer, and search for the delimiter anywhere in the buffer. Something like this:
def message(sock, delimiter):
buf = ''
while True:
data = sock.read(4096)
if not data:
# If the socket closes with no delimiter, this will
# treat the last "partial file" as a complete file.
# If that's not what you want, just return, or raise.
yield buf
return
buf += data
messages = buf.split(delimiter)
for message in messages[:-1]:
yield message
buf = message[-1]
Meanwhile, you have another problem with your delimiter: There's nothing stopping it from appearing in the files you're trying to transmit. For example, what if you tried to send your script, or this web page?
That's one of the reasons that other protocols are often better than delimiters, but this isn't hard to deal with: just escape any delimiters found in the files. Since you're sending the whole file at once, you can just use replace on right before the sendall, and the reverse replace right before the split.
i am trying to create a gui client for my command line server. However, i am running into some annoying problems i cant seem to fix.
I'm not 100 % sure of what the actual problem is as sometimes the code will work, other times it wont. I think the main problem is that originally i tried the
while 1:
self.data = s.recv(1024)
if not self.data():
break
else:
print self.data()
Then i was sending to it with this
for f in files:
s.send(f)
Each f was a string of a filename. I expected it to come out on the recv side as one file name recieved for each recv call but instead on one recv call i got a big chunk of filenames i assume 1024 chars worth
Which made it impossible to check for the end of the data and thus the loop never exited.
This is the code i have now
def get_data(self,size = 1024):
self.alldata = ""
while 1:
while gtk.events_pending():
gtk.main_iteration()
self.recvdata = self.s.recv(size)
self.alldata += self.recvdata
if self.alldata.find("\r\n\r\nEOF"):
print "recieved end message"
self.rdata = self.alldata[:self.alldata.find("\r\n\r\nEOF")]
break
print "All data Recieved: " + str(len(self.rdata)) + "Bytes"
print "All data :\n" + self.rdata + "\n-------------------------------------------------"
self.infiles = self.rdata.split("-EOS-")
for nf in self.infiles:
if len(nf) > 2:
self.add_message(self.incomingIcon,nf)
At the minute im trying to get the client to read correctly from the server. What i want to happen is when the command list is typed in and sent to the client the server sends back the data and each file is appended to the list store
some times this works ok, other times only one of 1200 files gets returned, if it executes ok, if i try to type another command and send it , the whole gtk window geys out and the program becomes unresponsive.
Sorry i cant explain this question better, ive tried alot of different solutions all of which give different errors.
if someone could explain the recv command and why it may be giving the errors this is how im sending data to the client
if(commands[0] == 'list'):
whatpacketshouldlooklike=""
print "[Request] List files ", address
fil = list_files(path)
for f in fil:
sdata = f
whatpacketshouldlooklike += sdata + "-EOS-"
newSock.send(sdata +"-EOS-")
#print "sent: " + sdata
newSock.send("\r\n\r\nEOF")
whatpacketshouldlooklike += "\r\n\r\nEOF"
print "---------------------------------"
print whatpacketshouldlooklike
print "---------------------------------"
The problem you had in the first part is that sockets are stream based not message based. You need to come up with a message abstraction to layer on top of the stream. This way the other end of the pipe knows what is going on(how much data to expect as a part of one command) and isn't guessing at what is supposed to happen.
Use an abstraction layer (Pyro, XML-RPC, zeromq) or define your own protocol to distinguish messages.
For example as own protocol you can send the length of a message as a "header" before each string. In this case you should use the struct module to parse the length into a binary format. Ask again, if you want to go this way, but I strongly recommend choosing one of the mentioned abstraction layers.
There are different problems with your code.
Let's start with the fundamental that some people already commented, there is no relation between sends() and recv(), you do not control which part of the data is returned on a recv(call), you need some kind of protocol, on your case it could be just as simple as terminating command strings with "\n", and checking for "\n" on the server to consume the data.
Now other problems:
You are using send without checking it's return size, a send() does not guarantee that the data is completely written, if you need that please use sendall().
By using recv(1024) in a blocking socket (default), your server code may wait for 1024 bytes to be received, this will not allow you to process messages until you get the full chunk, you need to use a non blocking socket, and the select module.
My source code:
def readReliably(s,n):
buf = bytearray(n)
view = memoryview(buf)
sz = 0
while sz < n:
k = s.recv_into(view[sz:],n-sz)
sz += k
# print 'readReliably()',sz
return sz,buf
def writeReliably(s,buf,n):
sz = 0
while sz < n:
k = s.send(buf[sz:],n-sz)
sz += k
# obj = s.makefile(mode='w')
# obj.flush()
# print 'writeReliably()',sz
return sz
Usage of these functions:
# Server
s = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
s.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
s.bind((host,port))
s.listen(10) # unaccepted connections
while True:
sk,skfrom = s.accept()
sz,buf = io.readReliably(sk,4)
a = struct.unpack("4B",buf)
print repr(a)
# ...
io.writeReliably(sk,struct.pack("4B",*[0x01,0x02,0x03,0x04]))
See also official docs about recv_into(...), https://docs.python.org/2/library/socket.html#socket.socket.recv_into