Related
This question already has answers here:
"is" operator behaves unexpectedly with integers
(11 answers)
Closed last month.
in shell environment,
x = 250
y = 250
x + 100 is y + 100
x + 100 is y + 100 result is False.
Why is the result value "False" while id(x), id(y) is same?
Also
x = 250
y = 250
x is y
x += 10
y += 10
x is y
last statement result is False. It is same problem.
I thought both questions would be True.
At a high-level, is checks whether the values refer to the same reference, while == calls a method of the objects to compare them
As a general rule, only use is when comparing against singletons
None
True
False
and == everywhere else
#Mark Ransom's comment gets to why this can have unexpected effects (such as numbers sometimes comparing the same, not not every time) .. small numbers have a special priority and are cached, though to my knowledge this is implementation-specific (and so it may vary between different interpreters and versions of Python) and should not be relied upon
>>> a = 100
>>> b = 100
>>> c = 1000
>>> d = 1000
>>> a is b
True
>>> c is d
False
"The is operator does not match the values of the variables, but the instances themselves."
Source : Understanding the "is" operator
To sum up, the values are equal but the instances isn't the same.
I recommend this lecture from Python official documentation : https://docs.python.org/3/tutorial/classes.html
is checks object identity. It is only True if you are comparing the same object on both sides. Just because two integers have the same value doesn't mean they have to be the same object. In fact, they usually aren't.
CPython optimizes a small set of integers (-5 through +256) to always be singletons. That is, whenever an integer is created, python checks whether the integer is in a small range of cached integers and uses those when possible. This is pretty quick - for small integers, which are the most commonly used integers, you don't need to create new objects. But its not scalable. Outside that range, python will generally create a new integer even if the integer already exists. The cost of lookup is too much.
The python compiler may also reuse immutables such as integers and strings that it knows about in a given compilation unit. This lookup is done once at compile and is relatively fast considering everything that goes on in that compile step.
But you can't rely on any of this. This is just how python happens to be implemented and the moment and it may change in the future. There are several singletons you can count on: None, True and False will always work.
It's well known that comparing floats for equality is a little fiddly due to rounding and precision issues.
For example: Comparing Floating Point Numbers, 2012 Edition
What is the recommended way to deal with this in Python?
Is a standard library function for this somewhere?
Python 3.5 adds the math.isclose and cmath.isclose functions as described in PEP 485.
If you're using an earlier version of Python, the equivalent function is given in the documentation.
def isclose(a, b, rel_tol=1e-09, abs_tol=0.0):
return abs(a-b) <= max(rel_tol * max(abs(a), abs(b)), abs_tol)
rel_tol is a relative tolerance, it is multiplied by the greater of the magnitudes of the two arguments; as the values get larger, so does the allowed difference between them while still considering them equal.
abs_tol is an absolute tolerance that is applied as-is in all cases. If the difference is less than either of those tolerances, the values are considered equal.
Something as simple as the following may be good enough:
return abs(f1 - f2) <= allowed_error
I would agree that Gareth's answer is probably most appropriate as a lightweight function/solution.
But I thought it would be helpful to note that if you are using NumPy or are considering it, there is a packaged function for this.
numpy.isclose(a, b, rtol=1e-05, atol=1e-08, equal_nan=False)
A little disclaimer though: installing NumPy can be a non-trivial experience depending on your platform.
Use Python's decimal module, which provides the Decimal class.
From the comments:
It is worth noting that if you're
doing math-heavy work and you don't
absolutely need the precision from
decimal, this can really bog things
down. Floats are way, way faster to
deal with, but imprecise. Decimals are
extremely precise but slow.
The common wisdom that floating-point numbers cannot be compared for equality is inaccurate. Floating-point numbers are no different from integers: If you evaluate "a == b", you will get true if they are identical numbers and false otherwise (with the understanding that two NaNs are of course not identical numbers).
The actual problem is this: If I have done some calculations and am not sure the two numbers I have to compare are exactly correct, then what? This problem is the same for floating-point as it is for integers. If you evaluate the integer expression "7/3*3", it will not compare equal to "7*3/3".
So suppose we asked "How do I compare integers for equality?" in such a situation. There is no single answer; what you should do depends on the specific situation, notably what sort of errors you have and what you want to achieve.
Here are some possible choices.
If you want to get a "true" result if the mathematically exact numbers would be equal, then you might try to use the properties of the calculations you perform to prove that you get the same errors in the two numbers. If that is feasible, and you compare two numbers that result from expressions that would give equal numbers if computed exactly, then you will get "true" from the comparison. Another approach is that you might analyze the properties of the calculations and prove that the error never exceeds a certain amount, perhaps an absolute amount or an amount relative to one of the inputs or one of the outputs. In that case, you can ask whether the two calculated numbers differ by at most that amount, and return "true" if they are within the interval. If you cannot prove an error bound, you might guess and hope for the best. One way of guessing is to evaluate many random samples and see what sort of distribution you get in the results.
Of course, since we only set the requirement that you get "true" if the mathematically exact results are equal, we left open the possibility that you get "true" even if they are unequal. (In fact, we can satisfy the requirement by always returning "true". This makes the calculation simple but is generally undesirable, so I will discuss improving the situation below.)
If you want to get a "false" result if the mathematically exact numbers would be unequal, you need to prove that your evaluation of the numbers yields different numbers if the mathematically exact numbers would be unequal. This may be impossible for practical purposes in many common situations. So let us consider an alternative.
A useful requirement might be that we get a "false" result if the mathematically exact numbers differ by more than a certain amount. For example, perhaps we are going to calculate where a ball thrown in a computer game traveled, and we want to know whether it struck a bat. In this case, we certainly want to get "true" if the ball strikes the bat, and we want to get "false" if the ball is far from the bat, and we can accept an incorrect "true" answer if the ball in a mathematically exact simulation missed the bat but is within a millimeter of hitting the bat. In that case, we need to prove (or guess/estimate) that our calculation of the ball's position and the bat's position have a combined error of at most one millimeter (for all positions of interest). This would allow us to always return "false" if the ball and bat are more than a millimeter apart, to return "true" if they touch, and to return "true" if they are close enough to be acceptable.
So, how you decide what to return when comparing floating-point numbers depends very much on your specific situation.
As to how you go about proving error bounds for calculations, that can be a complicated subject. Any floating-point implementation using the IEEE 754 standard in round-to-nearest mode returns the floating-point number nearest to the exact result for any basic operation (notably multiplication, division, addition, subtraction, square root). (In case of tie, round so the low bit is even.) (Be particularly careful about square root and division; your language implementation might use methods that do not conform to IEEE 754 for those.) Because of this requirement, we know the error in a single result is at most 1/2 of the value of the least significant bit. (If it were more, the rounding would have gone to a different number that is within 1/2 the value.)
Going on from there gets substantially more complicated; the next step is performing an operation where one of the inputs already has some error. For simple expressions, these errors can be followed through the calculations to reach a bound on the final error. In practice, this is only done in a few situations, such as working on a high-quality mathematics library. And, of course, you need precise control over exactly which operations are performed. High-level languages often give the compiler a lot of slack, so you might not know in which order operations are performed.
There is much more that could be (and is) written about this topic, but I have to stop there. In summary, the answer is: There is no library routine for this comparison because there is no single solution that fits most needs that is worth putting into a library routine. (If comparing with a relative or absolute error interval suffices for you, you can do it simply without a library routine.)
math.isclose() has been added to Python 3.5 for that (source code). Here is a port of it to Python 2. It's difference from one-liner of Mark Ransom is that it can handle "inf" and "-inf" properly.
def isclose(a, b, rel_tol=1e-09, abs_tol=0.0):
'''
Python 2 implementation of Python 3.5 math.isclose()
https://github.com/python/cpython/blob/v3.5.10/Modules/mathmodule.c#L1993
'''
# sanity check on the inputs
if rel_tol < 0 or abs_tol < 0:
raise ValueError("tolerances must be non-negative")
# short circuit exact equality -- needed to catch two infinities of
# the same sign. And perhaps speeds things up a bit sometimes.
if a == b:
return True
# This catches the case of two infinities of opposite sign, or
# one infinity and one finite number. Two infinities of opposite
# sign would otherwise have an infinite relative tolerance.
# Two infinities of the same sign are caught by the equality check
# above.
if math.isinf(a) or math.isinf(b):
return False
# now do the regular computation
# this is essentially the "weak" test from the Boost library
diff = math.fabs(b - a)
result = (((diff <= math.fabs(rel_tol * b)) or
(diff <= math.fabs(rel_tol * a))) or
(diff <= abs_tol))
return result
I'm not aware of anything in the Python standard library (or elsewhere) that implements Dawson's AlmostEqual2sComplement function. If that's the sort of behaviour you want, you'll have to implement it yourself. (In which case, rather than using Dawson's clever bitwise hacks you'd probably do better to use more conventional tests of the form if abs(a-b) <= eps1*(abs(a)+abs(b)) + eps2 or similar. To get Dawson-like behaviour you might say something like if abs(a-b) <= eps*max(EPS,abs(a),abs(b)) for some small fixed EPS; this isn't exactly the same as Dawson, but it's similar in spirit.
If you want to use it in testing/TDD context, I'd say this is a standard way:
from nose.tools import assert_almost_equals
assert_almost_equals(x, y, places=7) # The default is 7
In terms of absolute error, you can just check
if abs(a - b) <= error:
print("Almost equal")
Some information of why float act weird in Python:
Python 3 Tutorial 03 - if-else, logical operators and top beginner mistakes
You can also use math.isclose for relative errors.
This is useful for the case where you want to make sure two numbers are the same 'up to precision', and there isn't any need to specify the tolerance:
Find minimum precision of the two numbers
Round both of them to minimum precision and compare
def isclose(a, b):
astr = str(a)
aprec = len(astr.split('.')[1]) if '.' in astr else 0
bstr = str(b)
bprec = len(bstr.split('.')[1]) if '.' in bstr else 0
prec = min(aprec, bprec)
return round(a, prec) == round(b, prec)
As written, it only works for numbers without the 'e' in their string representation (meaning 0.9999999999995e-4 < number <= 0.9999999999995e11)
Example:
>>> isclose(10.0, 10.049)
True
>>> isclose(10.0, 10.05)
False
For some of the cases where you can affect the source number representation, you can represent them as fractions instead of floats, using integer numerator and denominator. That way you can have exact comparisons.
See Fraction from fractions module for details.
I liked Sesquipedal's suggestion, but with modification (a special use case when both values are 0 returns False). In my case, I was on Python 2.7 and just used a simple function:
if f1 ==0 and f2 == 0:
return True
else:
return abs(f1-f2) < tol*max(abs(f1),abs(f2))
If you want to do it in a testing or TDD context using the pytest package, here's how:
import pytest
PRECISION = 1e-3
def assert_almost_equal():
obtained_value = 99.99
expected_value = 100.00
assert obtained_value == pytest.approx(expected_value, PRECISION)
I found the following comparison helpful:
str(f1) == str(f2)
To compare up to a given decimal without atol/rtol:
def almost_equal(a, b, decimal=6):
return '{0:.{1}f}'.format(a, decimal) == '{0:.{1}f}'.format(b, decimal)
print(almost_equal(0.0, 0.0001, decimal=5)) # False
print(almost_equal(0.0, 0.0001, decimal=4)) # True
This maybe is a bit ugly hack, but it works pretty well when you don't need more than the default float precision (about 11 decimals).
The round_to function uses the format method from the built-in str class to round up the float to a string that represents the float with the number of decimals needed, and then applies the eval built-in function to the rounded float string to get back to the float numeric type.
The is_close function just applies a simple conditional to the rounded up float.
def round_to(float_num, prec):
return eval("'{:." + str(int(prec)) + "f}'.format(" + str(float_num) + ")")
def is_close(float_a, float_b, prec):
if round_to(float_a, prec) == round_to(float_b, prec):
return True
return False
>>>a = 10.0
10.0
>>>b = 10.0001
10.0001
>>>print is_close(a, b, prec=3)
True
>>>print is_close(a, b, prec=4)
False
Update:
As suggested by #stepehjfox, a cleaner way to build a rount_to function avoiding "eval" is using nested formatting:
def round_to(float_num, prec):
return '{:.{precision}f}'.format(float_num, precision=prec)
Following the same idea, the code can be even simpler using the great new f-strings (Python 3.6+):
def round_to(float_num, prec):
return f'{float_num:.{prec}f}'
So, we could even wrap it up all in one simple and clean 'is_close' function:
def is_close(a, b, prec):
return f'{a:.{prec}f}' == f'{b:.{prec}f}'
If you want to compare floats, the options above are great, but in my case, I ended up using Enum's, since I only had few valid floats my use case was accepting.
from enum import Enum
class HolidayMultipliers(Enum):
EMPLOYED_LESS_THAN_YEAR = 2.0
EMPLOYED_MORE_THAN_YEAR = 2.5
Then running:
testable_value = 2.0
HolidayMultipliers(testable_value)
If the float is valid, it's fine, but otherwise it will just throw an ValueError.
Use == is a simple good way, if you don't care about tolerance precisely.
# Python 3.8.5
>>> 1.0000000000001 == 1
False
>>> 1.00000000000001 == 1
True
But watch out for 0:
>>> 0 == 0.00000000000000000000000000000000000000000001
False
The 0 is always the zero.
Use math.isclose if you want to control the tolerance.
The default a == b is equivalent to math.isclose(a, b, rel_tol=1e-16, abs_tol=0).
If you still want to use == with a self-defined tolerance:
>>> class MyFloat(float):
def __eq__(self, another):
return math.isclose(self, another, rel_tol=0, abs_tol=0.001)
>>> a == MyFloat(0)
>>> a
0.0
>>> a == 0.001
True
So far, I didn't find anywhere to config it globally for float. Besides, mock is also not working for float.__eq__.
It's well known that comparing floats for equality is a little fiddly due to rounding and precision issues.
For example: Comparing Floating Point Numbers, 2012 Edition
What is the recommended way to deal with this in Python?
Is a standard library function for this somewhere?
Python 3.5 adds the math.isclose and cmath.isclose functions as described in PEP 485.
If you're using an earlier version of Python, the equivalent function is given in the documentation.
def isclose(a, b, rel_tol=1e-09, abs_tol=0.0):
return abs(a-b) <= max(rel_tol * max(abs(a), abs(b)), abs_tol)
rel_tol is a relative tolerance, it is multiplied by the greater of the magnitudes of the two arguments; as the values get larger, so does the allowed difference between them while still considering them equal.
abs_tol is an absolute tolerance that is applied as-is in all cases. If the difference is less than either of those tolerances, the values are considered equal.
Something as simple as the following may be good enough:
return abs(f1 - f2) <= allowed_error
I would agree that Gareth's answer is probably most appropriate as a lightweight function/solution.
But I thought it would be helpful to note that if you are using NumPy or are considering it, there is a packaged function for this.
numpy.isclose(a, b, rtol=1e-05, atol=1e-08, equal_nan=False)
A little disclaimer though: installing NumPy can be a non-trivial experience depending on your platform.
Use Python's decimal module, which provides the Decimal class.
From the comments:
It is worth noting that if you're
doing math-heavy work and you don't
absolutely need the precision from
decimal, this can really bog things
down. Floats are way, way faster to
deal with, but imprecise. Decimals are
extremely precise but slow.
The common wisdom that floating-point numbers cannot be compared for equality is inaccurate. Floating-point numbers are no different from integers: If you evaluate "a == b", you will get true if they are identical numbers and false otherwise (with the understanding that two NaNs are of course not identical numbers).
The actual problem is this: If I have done some calculations and am not sure the two numbers I have to compare are exactly correct, then what? This problem is the same for floating-point as it is for integers. If you evaluate the integer expression "7/3*3", it will not compare equal to "7*3/3".
So suppose we asked "How do I compare integers for equality?" in such a situation. There is no single answer; what you should do depends on the specific situation, notably what sort of errors you have and what you want to achieve.
Here are some possible choices.
If you want to get a "true" result if the mathematically exact numbers would be equal, then you might try to use the properties of the calculations you perform to prove that you get the same errors in the two numbers. If that is feasible, and you compare two numbers that result from expressions that would give equal numbers if computed exactly, then you will get "true" from the comparison. Another approach is that you might analyze the properties of the calculations and prove that the error never exceeds a certain amount, perhaps an absolute amount or an amount relative to one of the inputs or one of the outputs. In that case, you can ask whether the two calculated numbers differ by at most that amount, and return "true" if they are within the interval. If you cannot prove an error bound, you might guess and hope for the best. One way of guessing is to evaluate many random samples and see what sort of distribution you get in the results.
Of course, since we only set the requirement that you get "true" if the mathematically exact results are equal, we left open the possibility that you get "true" even if they are unequal. (In fact, we can satisfy the requirement by always returning "true". This makes the calculation simple but is generally undesirable, so I will discuss improving the situation below.)
If you want to get a "false" result if the mathematically exact numbers would be unequal, you need to prove that your evaluation of the numbers yields different numbers if the mathematically exact numbers would be unequal. This may be impossible for practical purposes in many common situations. So let us consider an alternative.
A useful requirement might be that we get a "false" result if the mathematically exact numbers differ by more than a certain amount. For example, perhaps we are going to calculate where a ball thrown in a computer game traveled, and we want to know whether it struck a bat. In this case, we certainly want to get "true" if the ball strikes the bat, and we want to get "false" if the ball is far from the bat, and we can accept an incorrect "true" answer if the ball in a mathematically exact simulation missed the bat but is within a millimeter of hitting the bat. In that case, we need to prove (or guess/estimate) that our calculation of the ball's position and the bat's position have a combined error of at most one millimeter (for all positions of interest). This would allow us to always return "false" if the ball and bat are more than a millimeter apart, to return "true" if they touch, and to return "true" if they are close enough to be acceptable.
So, how you decide what to return when comparing floating-point numbers depends very much on your specific situation.
As to how you go about proving error bounds for calculations, that can be a complicated subject. Any floating-point implementation using the IEEE 754 standard in round-to-nearest mode returns the floating-point number nearest to the exact result for any basic operation (notably multiplication, division, addition, subtraction, square root). (In case of tie, round so the low bit is even.) (Be particularly careful about square root and division; your language implementation might use methods that do not conform to IEEE 754 for those.) Because of this requirement, we know the error in a single result is at most 1/2 of the value of the least significant bit. (If it were more, the rounding would have gone to a different number that is within 1/2 the value.)
Going on from there gets substantially more complicated; the next step is performing an operation where one of the inputs already has some error. For simple expressions, these errors can be followed through the calculations to reach a bound on the final error. In practice, this is only done in a few situations, such as working on a high-quality mathematics library. And, of course, you need precise control over exactly which operations are performed. High-level languages often give the compiler a lot of slack, so you might not know in which order operations are performed.
There is much more that could be (and is) written about this topic, but I have to stop there. In summary, the answer is: There is no library routine for this comparison because there is no single solution that fits most needs that is worth putting into a library routine. (If comparing with a relative or absolute error interval suffices for you, you can do it simply without a library routine.)
math.isclose() has been added to Python 3.5 for that (source code). Here is a port of it to Python 2. It's difference from one-liner of Mark Ransom is that it can handle "inf" and "-inf" properly.
def isclose(a, b, rel_tol=1e-09, abs_tol=0.0):
'''
Python 2 implementation of Python 3.5 math.isclose()
https://github.com/python/cpython/blob/v3.5.10/Modules/mathmodule.c#L1993
'''
# sanity check on the inputs
if rel_tol < 0 or abs_tol < 0:
raise ValueError("tolerances must be non-negative")
# short circuit exact equality -- needed to catch two infinities of
# the same sign. And perhaps speeds things up a bit sometimes.
if a == b:
return True
# This catches the case of two infinities of opposite sign, or
# one infinity and one finite number. Two infinities of opposite
# sign would otherwise have an infinite relative tolerance.
# Two infinities of the same sign are caught by the equality check
# above.
if math.isinf(a) or math.isinf(b):
return False
# now do the regular computation
# this is essentially the "weak" test from the Boost library
diff = math.fabs(b - a)
result = (((diff <= math.fabs(rel_tol * b)) or
(diff <= math.fabs(rel_tol * a))) or
(diff <= abs_tol))
return result
I'm not aware of anything in the Python standard library (or elsewhere) that implements Dawson's AlmostEqual2sComplement function. If that's the sort of behaviour you want, you'll have to implement it yourself. (In which case, rather than using Dawson's clever bitwise hacks you'd probably do better to use more conventional tests of the form if abs(a-b) <= eps1*(abs(a)+abs(b)) + eps2 or similar. To get Dawson-like behaviour you might say something like if abs(a-b) <= eps*max(EPS,abs(a),abs(b)) for some small fixed EPS; this isn't exactly the same as Dawson, but it's similar in spirit.
If you want to use it in testing/TDD context, I'd say this is a standard way:
from nose.tools import assert_almost_equals
assert_almost_equals(x, y, places=7) # The default is 7
In terms of absolute error, you can just check
if abs(a - b) <= error:
print("Almost equal")
Some information of why float act weird in Python:
Python 3 Tutorial 03 - if-else, logical operators and top beginner mistakes
You can also use math.isclose for relative errors.
This is useful for the case where you want to make sure two numbers are the same 'up to precision', and there isn't any need to specify the tolerance:
Find minimum precision of the two numbers
Round both of them to minimum precision and compare
def isclose(a, b):
astr = str(a)
aprec = len(astr.split('.')[1]) if '.' in astr else 0
bstr = str(b)
bprec = len(bstr.split('.')[1]) if '.' in bstr else 0
prec = min(aprec, bprec)
return round(a, prec) == round(b, prec)
As written, it only works for numbers without the 'e' in their string representation (meaning 0.9999999999995e-4 < number <= 0.9999999999995e11)
Example:
>>> isclose(10.0, 10.049)
True
>>> isclose(10.0, 10.05)
False
For some of the cases where you can affect the source number representation, you can represent them as fractions instead of floats, using integer numerator and denominator. That way you can have exact comparisons.
See Fraction from fractions module for details.
I liked Sesquipedal's suggestion, but with modification (a special use case when both values are 0 returns False). In my case, I was on Python 2.7 and just used a simple function:
if f1 ==0 and f2 == 0:
return True
else:
return abs(f1-f2) < tol*max(abs(f1),abs(f2))
If you want to do it in a testing or TDD context using the pytest package, here's how:
import pytest
PRECISION = 1e-3
def assert_almost_equal():
obtained_value = 99.99
expected_value = 100.00
assert obtained_value == pytest.approx(expected_value, PRECISION)
I found the following comparison helpful:
str(f1) == str(f2)
To compare up to a given decimal without atol/rtol:
def almost_equal(a, b, decimal=6):
return '{0:.{1}f}'.format(a, decimal) == '{0:.{1}f}'.format(b, decimal)
print(almost_equal(0.0, 0.0001, decimal=5)) # False
print(almost_equal(0.0, 0.0001, decimal=4)) # True
This maybe is a bit ugly hack, but it works pretty well when you don't need more than the default float precision (about 11 decimals).
The round_to function uses the format method from the built-in str class to round up the float to a string that represents the float with the number of decimals needed, and then applies the eval built-in function to the rounded float string to get back to the float numeric type.
The is_close function just applies a simple conditional to the rounded up float.
def round_to(float_num, prec):
return eval("'{:." + str(int(prec)) + "f}'.format(" + str(float_num) + ")")
def is_close(float_a, float_b, prec):
if round_to(float_a, prec) == round_to(float_b, prec):
return True
return False
>>>a = 10.0
10.0
>>>b = 10.0001
10.0001
>>>print is_close(a, b, prec=3)
True
>>>print is_close(a, b, prec=4)
False
Update:
As suggested by #stepehjfox, a cleaner way to build a rount_to function avoiding "eval" is using nested formatting:
def round_to(float_num, prec):
return '{:.{precision}f}'.format(float_num, precision=prec)
Following the same idea, the code can be even simpler using the great new f-strings (Python 3.6+):
def round_to(float_num, prec):
return f'{float_num:.{prec}f}'
So, we could even wrap it up all in one simple and clean 'is_close' function:
def is_close(a, b, prec):
return f'{a:.{prec}f}' == f'{b:.{prec}f}'
If you want to compare floats, the options above are great, but in my case, I ended up using Enum's, since I only had few valid floats my use case was accepting.
from enum import Enum
class HolidayMultipliers(Enum):
EMPLOYED_LESS_THAN_YEAR = 2.0
EMPLOYED_MORE_THAN_YEAR = 2.5
Then running:
testable_value = 2.0
HolidayMultipliers(testable_value)
If the float is valid, it's fine, but otherwise it will just throw an ValueError.
Use == is a simple good way, if you don't care about tolerance precisely.
# Python 3.8.5
>>> 1.0000000000001 == 1
False
>>> 1.00000000000001 == 1
True
But watch out for 0:
>>> 0 == 0.00000000000000000000000000000000000000000001
False
The 0 is always the zero.
Use math.isclose if you want to control the tolerance.
The default a == b is equivalent to math.isclose(a, b, rel_tol=1e-16, abs_tol=0).
If you still want to use == with a self-defined tolerance:
>>> class MyFloat(float):
def __eq__(self, another):
return math.isclose(self, another, rel_tol=0, abs_tol=0.001)
>>> a == MyFloat(0)
>>> a
0.0
>>> a == 0.001
True
So far, I didn't find anywhere to config it globally for float. Besides, mock is also not working for float.__eq__.
This question already has answers here:
approximate comparison in python
(3 answers)
Closed 8 years ago.
I just recently ran into a problem where I needed to append numbers to a list only if they weren't in the list already, and then I had to run those numbers through a comparison later on. The problem arises in floating point arithmetic errors. To illustrate what is basically happening in my code:
_list = [5.333333333333333, 6.666666666666667, ...]
number = some_calculation()
if number not in _list:
_list.append(number) #note that I can't use a set to remove
#duplicates because order needs to be maintained
new_list = []
for num in _list:
if some_comparison(num): #note that I can't combine 'some_comparison' with the
new_list.append(num) #above check to see if the item is already in the list
The problem is that some_calculation() would sometimes generate an inexact number, such as 5.333333333333332, which is, as far as my calculations need to go, the same as the first element in _list in this example. The solution I had in mind was to simply round all the numbers generated to 9 or so decimal places. This worked for a short amount of time, until I realized that some_comparison compares num against, again, an inexact calculation. Even if I didn't round the numbers in _list, some_comparison would still return an inexact value and thus would evaluate to False.
I am absolutely puzzled. I've never had to worry about floating point errors so this problem is quite infuriating. Does anyone have any ideas for solutions?
NOTE: I would post the actual code, but it's very convoluted and requires 7 or 8 different functions and classes I made specifically for this purpose, and reposting them here would be a hassle.
Make the comparison something like
if(abs(a-b) <= 1e-6 * (a + b)):
This is standard practice when using floating point. The real value you use (instead of 1e-6) depends on the magnitude of the numbers you use and your definition of "the same".
EDIT I added *(a+b) to give some robustness for values of different magnitudes, and changed the comparison to <= rather than < to cover the case where a==b==0.0.
You can subclass list and add in a tolerance to __contains__:
class ListOFloats(list):
def __contains__(self, f):
# If you want a different tolerance, set it like so:
# l=ListOFloats([seq])
# l.tol=tolerance_you_want
tol=getattr(self, 'tol', 1e-12)
return any(abs(e-f) <= 0.5 * tol * (e + f) for e in self)
_list = ListOFloats([5.333333333333333, 6.666666666666667])
print(5.333333333333333 in _list)
# True
print(6.66666666666666 in _list)
# True
print(6.66666666666 in _list)
# False
Use round on both the values in the list and the comparison values. They won't be exact but they'll be consistent, so a search will return the expected results.
It's well known that comparing floats for equality is a little fiddly due to rounding and precision issues.
For example: Comparing Floating Point Numbers, 2012 Edition
What is the recommended way to deal with this in Python?
Is a standard library function for this somewhere?
Python 3.5 adds the math.isclose and cmath.isclose functions as described in PEP 485.
If you're using an earlier version of Python, the equivalent function is given in the documentation.
def isclose(a, b, rel_tol=1e-09, abs_tol=0.0):
return abs(a-b) <= max(rel_tol * max(abs(a), abs(b)), abs_tol)
rel_tol is a relative tolerance, it is multiplied by the greater of the magnitudes of the two arguments; as the values get larger, so does the allowed difference between them while still considering them equal.
abs_tol is an absolute tolerance that is applied as-is in all cases. If the difference is less than either of those tolerances, the values are considered equal.
Something as simple as the following may be good enough:
return abs(f1 - f2) <= allowed_error
I would agree that Gareth's answer is probably most appropriate as a lightweight function/solution.
But I thought it would be helpful to note that if you are using NumPy or are considering it, there is a packaged function for this.
numpy.isclose(a, b, rtol=1e-05, atol=1e-08, equal_nan=False)
A little disclaimer though: installing NumPy can be a non-trivial experience depending on your platform.
Use Python's decimal module, which provides the Decimal class.
From the comments:
It is worth noting that if you're
doing math-heavy work and you don't
absolutely need the precision from
decimal, this can really bog things
down. Floats are way, way faster to
deal with, but imprecise. Decimals are
extremely precise but slow.
The common wisdom that floating-point numbers cannot be compared for equality is inaccurate. Floating-point numbers are no different from integers: If you evaluate "a == b", you will get true if they are identical numbers and false otherwise (with the understanding that two NaNs are of course not identical numbers).
The actual problem is this: If I have done some calculations and am not sure the two numbers I have to compare are exactly correct, then what? This problem is the same for floating-point as it is for integers. If you evaluate the integer expression "7/3*3", it will not compare equal to "7*3/3".
So suppose we asked "How do I compare integers for equality?" in such a situation. There is no single answer; what you should do depends on the specific situation, notably what sort of errors you have and what you want to achieve.
Here are some possible choices.
If you want to get a "true" result if the mathematically exact numbers would be equal, then you might try to use the properties of the calculations you perform to prove that you get the same errors in the two numbers. If that is feasible, and you compare two numbers that result from expressions that would give equal numbers if computed exactly, then you will get "true" from the comparison. Another approach is that you might analyze the properties of the calculations and prove that the error never exceeds a certain amount, perhaps an absolute amount or an amount relative to one of the inputs or one of the outputs. In that case, you can ask whether the two calculated numbers differ by at most that amount, and return "true" if they are within the interval. If you cannot prove an error bound, you might guess and hope for the best. One way of guessing is to evaluate many random samples and see what sort of distribution you get in the results.
Of course, since we only set the requirement that you get "true" if the mathematically exact results are equal, we left open the possibility that you get "true" even if they are unequal. (In fact, we can satisfy the requirement by always returning "true". This makes the calculation simple but is generally undesirable, so I will discuss improving the situation below.)
If you want to get a "false" result if the mathematically exact numbers would be unequal, you need to prove that your evaluation of the numbers yields different numbers if the mathematically exact numbers would be unequal. This may be impossible for practical purposes in many common situations. So let us consider an alternative.
A useful requirement might be that we get a "false" result if the mathematically exact numbers differ by more than a certain amount. For example, perhaps we are going to calculate where a ball thrown in a computer game traveled, and we want to know whether it struck a bat. In this case, we certainly want to get "true" if the ball strikes the bat, and we want to get "false" if the ball is far from the bat, and we can accept an incorrect "true" answer if the ball in a mathematically exact simulation missed the bat but is within a millimeter of hitting the bat. In that case, we need to prove (or guess/estimate) that our calculation of the ball's position and the bat's position have a combined error of at most one millimeter (for all positions of interest). This would allow us to always return "false" if the ball and bat are more than a millimeter apart, to return "true" if they touch, and to return "true" if they are close enough to be acceptable.
So, how you decide what to return when comparing floating-point numbers depends very much on your specific situation.
As to how you go about proving error bounds for calculations, that can be a complicated subject. Any floating-point implementation using the IEEE 754 standard in round-to-nearest mode returns the floating-point number nearest to the exact result for any basic operation (notably multiplication, division, addition, subtraction, square root). (In case of tie, round so the low bit is even.) (Be particularly careful about square root and division; your language implementation might use methods that do not conform to IEEE 754 for those.) Because of this requirement, we know the error in a single result is at most 1/2 of the value of the least significant bit. (If it were more, the rounding would have gone to a different number that is within 1/2 the value.)
Going on from there gets substantially more complicated; the next step is performing an operation where one of the inputs already has some error. For simple expressions, these errors can be followed through the calculations to reach a bound on the final error. In practice, this is only done in a few situations, such as working on a high-quality mathematics library. And, of course, you need precise control over exactly which operations are performed. High-level languages often give the compiler a lot of slack, so you might not know in which order operations are performed.
There is much more that could be (and is) written about this topic, but I have to stop there. In summary, the answer is: There is no library routine for this comparison because there is no single solution that fits most needs that is worth putting into a library routine. (If comparing with a relative or absolute error interval suffices for you, you can do it simply without a library routine.)
math.isclose() has been added to Python 3.5 for that (source code). Here is a port of it to Python 2. It's difference from one-liner of Mark Ransom is that it can handle "inf" and "-inf" properly.
def isclose(a, b, rel_tol=1e-09, abs_tol=0.0):
'''
Python 2 implementation of Python 3.5 math.isclose()
https://github.com/python/cpython/blob/v3.5.10/Modules/mathmodule.c#L1993
'''
# sanity check on the inputs
if rel_tol < 0 or abs_tol < 0:
raise ValueError("tolerances must be non-negative")
# short circuit exact equality -- needed to catch two infinities of
# the same sign. And perhaps speeds things up a bit sometimes.
if a == b:
return True
# This catches the case of two infinities of opposite sign, or
# one infinity and one finite number. Two infinities of opposite
# sign would otherwise have an infinite relative tolerance.
# Two infinities of the same sign are caught by the equality check
# above.
if math.isinf(a) or math.isinf(b):
return False
# now do the regular computation
# this is essentially the "weak" test from the Boost library
diff = math.fabs(b - a)
result = (((diff <= math.fabs(rel_tol * b)) or
(diff <= math.fabs(rel_tol * a))) or
(diff <= abs_tol))
return result
I'm not aware of anything in the Python standard library (or elsewhere) that implements Dawson's AlmostEqual2sComplement function. If that's the sort of behaviour you want, you'll have to implement it yourself. (In which case, rather than using Dawson's clever bitwise hacks you'd probably do better to use more conventional tests of the form if abs(a-b) <= eps1*(abs(a)+abs(b)) + eps2 or similar. To get Dawson-like behaviour you might say something like if abs(a-b) <= eps*max(EPS,abs(a),abs(b)) for some small fixed EPS; this isn't exactly the same as Dawson, but it's similar in spirit.
If you want to use it in testing/TDD context, I'd say this is a standard way:
from nose.tools import assert_almost_equals
assert_almost_equals(x, y, places=7) # The default is 7
In terms of absolute error, you can just check
if abs(a - b) <= error:
print("Almost equal")
Some information of why float act weird in Python:
Python 3 Tutorial 03 - if-else, logical operators and top beginner mistakes
You can also use math.isclose for relative errors.
This is useful for the case where you want to make sure two numbers are the same 'up to precision', and there isn't any need to specify the tolerance:
Find minimum precision of the two numbers
Round both of them to minimum precision and compare
def isclose(a, b):
astr = str(a)
aprec = len(astr.split('.')[1]) if '.' in astr else 0
bstr = str(b)
bprec = len(bstr.split('.')[1]) if '.' in bstr else 0
prec = min(aprec, bprec)
return round(a, prec) == round(b, prec)
As written, it only works for numbers without the 'e' in their string representation (meaning 0.9999999999995e-4 < number <= 0.9999999999995e11)
Example:
>>> isclose(10.0, 10.049)
True
>>> isclose(10.0, 10.05)
False
For some of the cases where you can affect the source number representation, you can represent them as fractions instead of floats, using integer numerator and denominator. That way you can have exact comparisons.
See Fraction from fractions module for details.
I liked Sesquipedal's suggestion, but with modification (a special use case when both values are 0 returns False). In my case, I was on Python 2.7 and just used a simple function:
if f1 ==0 and f2 == 0:
return True
else:
return abs(f1-f2) < tol*max(abs(f1),abs(f2))
If you want to do it in a testing or TDD context using the pytest package, here's how:
import pytest
PRECISION = 1e-3
def assert_almost_equal():
obtained_value = 99.99
expected_value = 100.00
assert obtained_value == pytest.approx(expected_value, PRECISION)
I found the following comparison helpful:
str(f1) == str(f2)
To compare up to a given decimal without atol/rtol:
def almost_equal(a, b, decimal=6):
return '{0:.{1}f}'.format(a, decimal) == '{0:.{1}f}'.format(b, decimal)
print(almost_equal(0.0, 0.0001, decimal=5)) # False
print(almost_equal(0.0, 0.0001, decimal=4)) # True
This maybe is a bit ugly hack, but it works pretty well when you don't need more than the default float precision (about 11 decimals).
The round_to function uses the format method from the built-in str class to round up the float to a string that represents the float with the number of decimals needed, and then applies the eval built-in function to the rounded float string to get back to the float numeric type.
The is_close function just applies a simple conditional to the rounded up float.
def round_to(float_num, prec):
return eval("'{:." + str(int(prec)) + "f}'.format(" + str(float_num) + ")")
def is_close(float_a, float_b, prec):
if round_to(float_a, prec) == round_to(float_b, prec):
return True
return False
>>>a = 10.0
10.0
>>>b = 10.0001
10.0001
>>>print is_close(a, b, prec=3)
True
>>>print is_close(a, b, prec=4)
False
Update:
As suggested by #stepehjfox, a cleaner way to build a rount_to function avoiding "eval" is using nested formatting:
def round_to(float_num, prec):
return '{:.{precision}f}'.format(float_num, precision=prec)
Following the same idea, the code can be even simpler using the great new f-strings (Python 3.6+):
def round_to(float_num, prec):
return f'{float_num:.{prec}f}'
So, we could even wrap it up all in one simple and clean 'is_close' function:
def is_close(a, b, prec):
return f'{a:.{prec}f}' == f'{b:.{prec}f}'
If you want to compare floats, the options above are great, but in my case, I ended up using Enum's, since I only had few valid floats my use case was accepting.
from enum import Enum
class HolidayMultipliers(Enum):
EMPLOYED_LESS_THAN_YEAR = 2.0
EMPLOYED_MORE_THAN_YEAR = 2.5
Then running:
testable_value = 2.0
HolidayMultipliers(testable_value)
If the float is valid, it's fine, but otherwise it will just throw an ValueError.
Use == is a simple good way, if you don't care about tolerance precisely.
# Python 3.8.5
>>> 1.0000000000001 == 1
False
>>> 1.00000000000001 == 1
True
But watch out for 0:
>>> 0 == 0.00000000000000000000000000000000000000000001
False
The 0 is always the zero.
Use math.isclose if you want to control the tolerance.
The default a == b is equivalent to math.isclose(a, b, rel_tol=1e-16, abs_tol=0).
If you still want to use == with a self-defined tolerance:
>>> class MyFloat(float):
def __eq__(self, another):
return math.isclose(self, another, rel_tol=0, abs_tol=0.001)
>>> a == MyFloat(0)
>>> a
0.0
>>> a == 0.001
True
So far, I didn't find anywhere to config it globally for float. Besides, mock is also not working for float.__eq__.